Commercial Spray and Abrasive Blasting Equipment Online Auction

Commercial Spray and Abrasive Blasting Equipment Online Auction

Tuesday, September 1^st, 2026, at 4pm CT

4907 N 124th St, Butler, WI 53007

NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.

Featured Items: Ingersoll Rand IRN75H Air Compressor; Commercial Spray Booth; JBI Open Face Spray Booth; Plastic Media Abrasive Blast Booth; Oxide Blast Booth; Ingersoll Rand PacE II Flow Controller; Ingersoll Rand Dryer; Reserve Air Tanks; Homemade Track System; Homemade HD Spray Booth Rolling Racks; Rolling Rotisserie Stand for Car Bodies; Blast Cabinets; Blasting Hoppers; Uni-ram Solvent Recycler System; Airco Dip/Stick 160 Welder; Paint Brands Including Diamond Vogel, Devoe, Imron, International, Axalta, Sherman Williams; Harbil Paint Mixer; Flammable Safety Cabinets; Parts Washer Cabinet; Steel Industrial Sawhorses; Steel Paint Poles; Industrial Paint Hooks.

You will also find Industrial Pallet Rack Shelving; Scaffolding; Barrel Dolly Carts; Toledo Pipe Threader; Binks paint sprayer Parts; Clipper Belt Lacer; Ladders; Carts; Cabinets; Platform Scales; Assorted Hardware; Air Filters; Audi Wheels and much more! 300 Lots!

Preview: Thursday, August 27 from 3pm until 4:30pm

Pick Up Day: Thursday, September 3 from 11am to 5pm.

#0a • * Payment Information - Please Read *

Invoices under $1,000.00 will automatically be charged to credit card on file plus a 4% convenience fee following the close of auction on September 2nd. If over $1,000.00, a cashier's check with your bank letter and/or wire transfer will be accepted along with credit cards. Please bring cash payments of the exact amount. Payment is due in full at the close of the auction. No items will be released until payment is made in full NO EXCEPTIONS. Jones Auction & Realty, LLC will charge ALL invoices with an amount due less than $1,000.00 automatically to the credit card plus the 4% convenience fee following the close of auction on September 2nd and send your receipt to the email address used to register in the auction. Cashier's Check accepted with bank letter. (which they will have if over $500). Your invoice receipt will include the total winning bid price, the Buyer's Fee, the Wisconsin Sales Tax, and if applicable a $25.00 wire transfer fee and $25.00 charge for any declined credit cards. Credit cards will be accepted at auction pick up site. We will contact buyer if their credit card is declined for any reason and an alternate credit card can be used prior to pick up by calling our office at (920) 261-6820. Receipt of your invoice will be emailed to you within 24 hours of the close of the sale. Please check your SPAM or JUNK folder if you have not received an invoice. PLEASE NOTE: A $25 service fee will be charged to any account whose credit card REGISTERED on file is declined and requires additional time and telephone contact to establish payment for merchandise. Please contact our office immediately at (920) 261-6820 if you know that you need to use an alternative credit card. This charge will appear on the invoice. Wire transfers for any amount will incur a $25.00 bank processing fee. Call for instructions if this is your preferred payment. Sorry, NO personal checks, money orders, or out of state checks will be accepted. If over $1,000.00, payments will be accepted at the pickup location. ALL payments must be made/given to Jones Auction & Realty LLC.

#0b • * Auction Pick Up Times + Location *

PICK UP: Local Pick up is at 4907 N 124th St, Butler, WI 53007. Scheduled Pick Up Times: Thursday, September 3, 2026 from 11am to 5pm Auction staff member(s) will be on location to assist customers when picking up items. We kindly ask that buyers wait on Auction staff members to collect their items. Auction staff has a forklift available to load heavy items. Appointments can be made with seller for buyers purchasing large items that require extra time to disassemble. SHIPPING: No Shipping Available Any Items NOT Picked Up by the Last Scheduled Pick-Up time and date with No Further Arrangements made in advance AND/OR Shipping Charges Not Paid After 10 Days will no longer be considered their property and will be Forfeited by the Buyer per these Terms & Conditions. For arrangements made other than scheduled pick up date and times, a $25.00 charge will be added to your credit card to cover the cost of rescheduling. There are NO Refunds. Auction Company has the Right to Dispose of any Item(s).

#0c • * Item Pictures + Descriptions *

Click on items to read full descriptions. Most lots have more than one pictures of the item(s) included. Please view all pictures prior to bidding as some pictures show condition of the items.

#0d • * Tax Exemption *

If you are claiming tax exemption, (e.g. farm use, resale, LC number etc.) please complete a tax exemption form if we don't have one on file currently. If you have a resale number, please send us that information prior to or immediately upon closing of the auction to avoid being charged sales tax. Thank you!

#0e • * Preview Date *

Scheduled Preview Date: Thursday, August 27 - 3:00PM to 4:30PM 4907 N 124th St, Butler, WI 53007

#0f • * Bank Letter Template *

The Bank Letter Confirmation of Funds must be received at our Jones Auction & Realty, LLC office prior to being approved for bids over $5,000. Fax to (920) 261-6830 or email: info@jonesauctionservice.com

#856 • Industrial Shelf Work Area with Lights

113-1/2" across, 9ft 8" tall, 4ft across. Space for storage above. Cabinets and small items not included

#857 • Assorted Hoses and Belts

#858 • Plastic Hardware Storage Bins

(6) 10 x 10", (2) 5 x 10", 8 x 10", 5 x 8", (5) 3.5 x 5"

#859 • (6) NEW Ashcroft Pressure Pot Gauges

(3) 15W1005 H 01L 60#. (3) 15W1005 H 01B 60#.

#860 • NEW Astro Star paint sprayer

#868 • DuPont Tyvek 400 Disposable Coveralls with Hood

Size XL

#869 • NEW Binks 2qt Pressure Pot Gaskets & Parts

#870 • Binks paint sprayer Parts Lot

#871 • Sharpe 71 paint sprayer, Pots, (2) Hangers, Nozzles and more

#872 • Binks Parts, Ashcroft Pressure Gauges and Used Parts

#873 • 3M Half Face Mask, Filter Retainer Part, (4) Filters

Plus Face Guard

#874 • Pressure Gauges, Filters and Parts

#875 • (2) File Cabinets with Top for Desk

Top: 35-1/2 x 66". Cabinets: 18" across, 25" deep, 28-1/2" tall.

#876 • Door Closure Parts

#877 • Drum D-Header Tool

#878 • Clipper Belt Lacer No. 3

#879 • Hon 2 Drawer File Cabinet

15 " 25 x 29" tall. Bottom drawer not closing all the way

#880 • Small Shelf

16 x 21 x 27" tall

#881 • Vtg Howe Platform Scale

#882 • Roll of 1" x 50" Foam Padding; 16x18x3" Foam Cushion

#883 • Roll of Carpet Pad

56" wide.

#884 • (4) Audi Rims with 17" Tires

Came off A3/A4. Michelin 235/45ZR17.

#885 • (2) Tub of Scrap Metal

#886 • Assorted Wheels for Shop Carts

4 to 10"

#887 • Box Full of Clipboards

Over 20

#888 • O Rings and Retaining Rings

#889 • Epco Alarm Bell Gong

5-3/4" diameter

#890 • (2) 400lb Toggle Clamps & 3 smaller

#891 • Garage Door Parts Lot

#892 • NEW Clemco C03547 Air Filter Cartridge

This item is new, 3rd picture is of a used one for reference

#893 • (3) La-Man 050SK Service Kits

#894 • Master Cylinder & Air Filter for Clark Forklift

#895 • Arm Mount Bracket; (3) U Supports

#896 • (5) 13 Watt & (2) 25 Watt Bulbs and more

#897 • (6) McMaster Carr Boro Discs

1.5" x 0.125" thick

#898 • Blow Tools & Nozzles

Some new

#899 • Fuses and Spark Plugs

#900 • Pneumatic Coupler, Hydraulic Fitting, Paint Sprayer Fittings

#901 • (4) NEW 3M Lens Assemblies

6898/37006

#902 • Small Cart Wheels; Belt Pulley

#903 • Redington 710-0052 Hour Meter

115V, 60Hz

#904 • Ultra Tool Mfg Aluminum Plate with Pulley

12"

#905 • Rubber Pin Bucklings

2 Small boxes

#906 • Distributor Cap; (7) Plug Wires

#907 • (5) Automotive Paint Color Information Binders

Plus a Metals Sample Book

#908 • 40" Gasket for Fire Doors

Used, bent

#909 • Shaft Collars, Pins, Spacers and more

#910 • Shuttle Valve 351-0631; High Pressure Regulator Piston

#911 • Hydraulic Oil Vent Cap

#912 • PVC Pipe and Plumbing Box Lot

#913 • Granzow 21HN3KY110 3/8" Solenoid Valve

#914 • (2) Weather Stripping & Some for Windows

#915 • CDI SW10 1 NPT Safety Relief Valve

150 psi

#916 • (4) Exit Signs; (3) Hours Signs; (2) Fire Extinguisher Signs

#917 • Grinder Blades, DeWalt Blades, Bits, Tools Box Lot

#918 • Replacement Face Shields

#919 • Painting and Pot Parts; Pedals

6 boxes/bins

#920 • (2) Boxes of Used Electrical and Compressor Parts

#921 • 1/4 & 1/2" Hose Barb Adapters

3 Small Bins

#922 • 9 Pair NEW Leather Welding Gloves

#923 • 1/2 & 3/4" Brass Valves; Hose Clamps; 1/4 & 5/16 Air Hoses

#924 • (10) Safety Cones

3 sizes, Used

#925 • (2) 55 Gallon Metal Barrels

#926 • (7) Plastic Totes/Crates

#927 • (3) Metal Buckets

#928 • Pizza Oven

#929 • Plywood & Laminated Tops/Doors

7ft & 8ft long. Used for painting Seller will be keeping 2 out of the items pictured

#930 • (8) NEW 20 x 24 x 2" Air Filters

#931 • (18) NEW 24 x 24 x 2" Air Filters

#932 • McMillan Fan Motor & 13-3/4" Blade

#933 • (6) Used paint sprayers and Parts

#934 • Hitch, Rope, Pieces of Chain in Crate

#935 • 1/4" x 12ft Chain

#936 • 3/8" x 6ft Chain

#937 • 5/16 x 12ft Chain

#938 • Stanley Strapping System with Tools & (3) Boxes of Seals

#939 • Partial Bucket White Interior Paint; Cement

#940 • Wilray Flammable Safety Cabinet (#22)

28" across. 28" deep. 59" tall.

#941 • Wilray Flammable Safety Cabinet (#20)

28" across. 28" deep. 59" tall.

#942 • Wilray Flammable Safety Cabinet (#21)

28" across. 28" deep. 59" tall.

#943 • 3 Section Industrial Shelving

2 sections are 8ft across, end section is 51". 37-39" deep. 8ft tall. Contents not included. Buyer responsible for disassembly and removal.

#944 • (4) Shovels, Rake, Hedge Trimmer, Trimmer Line

#945 • (3) Shovels; (4) Scrapers

#946 • (2) 2-1/2 x 3-1/2" x 8ft Steel Angle

1/4" thick

#947 • (6) Boards Used in Paint Booths

#948 • 4x4x8ft Timber; & (2) other boards

#949 • Eagle Shop Rag Container

15 x 17-1/2 x 21" tall

#950 • Painted Eagle Shop Rag Container

14 x 16 x 19" tall

#951 • (3) Binks 95 paint sprayers with Pots

Used

#952 • (2) Homemade Spray Booth Stands

4-1/2 x 4-1/2", 38" tall.

#953 • (2) Vise Grips

#954 • 55 Gallon Metal Barrel

Empty, Used as Stand in Paint Booth

#955 • 55 Gallon Metal Barrel

Empty, Used as Stand in Paint Booth

#956 • Smaller Metal Stand for Spray Booth

8 x 6 x 12" tall. 5/16" thick

#957 • (15) Small Steel Blocks Used for Stands in Spray Booths

#958 • 20" Fan on Wheels

57" tall

#959 • Rubbing beverage and Oils (4)

Some partials

#960 • Homemade Stand for Spray Booth

5-1/2 x 11-3/4". 18" tall - height adjustable

#961 • Bug Killer, Cleaner, Disinfectant

SaniMaster 7 is partial jug

#962 • Werner Ladder Covers; Paint & Drywall Tools

#963 • Industrial Paint Hooks - 8" long

Approx 55

#964 • (25) Industrial Paint Hooks - 10" x 1/4" thick

#965 • Vevor Permanent Magnetic Chuck

Rated for 300kg (660lbs)

#966 • Box of Small 4" Industrial Paint Hooks

#967 • Box of Thin 10" Industrial Paint Hooks

A few dozen

#968 • Box of 8" x 1/4" thick Industrial Paint Hooks

A few dozen

#969 • Bigger Box of 8" x 1/4" thick Industrial Paint Hooks

A few dozen

#970 • Box of 8" x 1/4" thick Industrial Paint Hooks

A few dozen

#971 • Bin of Mini 4" Thin Industrial Paint Hooks

A few dozen

#972 • Skil 1/2" Drill; Paint Mixing and Measuring Lot

#973 • (20) 36" x 1/4" Thick Industrial Paint Hooks

#974 • Thin 10" Industrial Paint Hooks

A few dozen

#975 • (6) 9" x 1/2" thick Industrial Paint Hooks

#976 • Pile of Steel Paint Poles

(5) 12ft, (6) 10ft plus more in shorter lengths

#977 • (3) Brooms, Dust Mop, Squeegee, Brush, Dust Pan

Plus some handles

#978 • (16) 8" x 1/4" thick Industrial Paint Hooks

#979 • 9" x 1/4" thick Industrial Paint Hooks

A few dozen

#980 • 9" x 1/8" thick Industrial Paint Hooks

A few dozen

#981 • (23) 7" x 1/8" thick Industrial Paint Hooks

#982 • 10" x 3/8" thick Industrial Paint Hooks

A few dozen

#983 • (32) 12" x 1/4 & 5/16" thick Industrial Paint Hooks

#984 • 11" x 1/4" thick Industrial Paint Hooks

A few dozen

#985 • (23) 15" x 1/2" thick Industrial Paint Hooks

#986 • 15" x 3/8" thick Industrial Paint Hooks

A few dozen

#987 • Assorted Industrial Paint Hooks

Up to 15" long. A few dozen

#988 • Assorted Big 24-36" Industrial Paint Hooks

9 total

#989 • (8) 30" x 1/2" Thick Industrial Paint Hooks

#990 • 2 Gallon Spray Pot

#991 • Diamond Vogel MAK N-4008

About 1/2 full

#992 • Metal Cart on Wheels

28 x 20 x 42" tall. Used in spray booth

#993 • (2) Steel Industrial HD Sawhorses

68 inches wide by 33 inches tall

#994 • Harbil HB-7 Paint Mixer

Holds 2 cans

#995 • Almost Full MEK Pail; 1/4 Full PS-2P/KK #345 Remover

#996 • Hanging paint and abrasive racks

Measures approximately 72 inches tall by 72 inches wide

#997 • Tempa Cure belt drive floor fan

45 inches wide

#998 • (2) Steel Industrial HD Sawhorses

Measures 42 inches w by 34 inches high

#1000 • Wilroy Paint cabinet

Measures approximately 39 inches wide by 40 inches deep by 77 inches tall

#1001 • Paint storage cabinet

Measures approximately 40 inches wide by 40 inches deep by 77 inches tall

#1002 • 3 Section Industrial Shelving Unit

Each section is 8ft long x 48" wide x 10ft tall. Contents not included. Buyer is responsible for disassembly and removal

#1003 • Pile of Steel Paint Poles (Left Side)

About 2 dozen. Most are 10 to 12.ft long.

#1004 • Pile of Steel Paint Poles (Right Side)

Approx 21. Most are 10.5ft long, 2 are longer.

#1005 • (3) Bags of Unused Plugs

Bags are opened

#1006 • Box of Used 5" Diameter Plugs

A few dozen

#1007 • Large Assortment of Used Plugs

#1008 • (6) Used Pneumatic Sanders

#1009 • Scaffolding

66" across. 28" wide. 65" tall.

#1010 • Uni-ram Solvent Recycler System with (2) Barrels

#1011 • Barrel Dolly

#1012 • (8) Large Dunnage Blocks

12 x 12 x 18

#1013 • Steel cart w/steel wheels

Measures 48 x 51 wide, two steel wheels not on but included

#1014 • Steel cart w/ steel wheels

Measures approximately 51 1/2“ x 48“

#1015 • 55 Gallon Metal Barrel

#1016 • Metal hand cart

#1017 • Static lifting station, portable

#1018 • Toledo 58 Pipe Threading Machine

Serial # 581-04497

#1019 • Nutting Barrel Dolly

#1020 • Conduit Bender

#1021 • Assorted conduit and pipe

1/2 inch to 1 inch

#1022 • Pipe Assorted lengths and sizes

1 inch to 2 1/2 inch, some lengths around 10 ft long

#1023 • 50 inch paint booth light

#1024 • Compressed air threaded Filter NF0450M01

#1025 • Hitch Plate for Forklift

#1026 • Unopened box of Glasfloss ZL Pleat Filters

(12) 24 x 24 x2

#1027 • Pedestal fan on wheels

#1028 • 55 Gallon Metal Barrel

Used as Stand in Paint Booth

#1029 • Rigid Pipe thread and reamers

#1030 • (2) forklift forks

6 inches wide by 46 inches long

#1031 • (2) Steel Industrial HD Sawhorses

Measure is 43 inches wide by 34 inches tall

#1032 • (2) Steel Industrial HD Sawhorses

Measures approximately 67 inches wide by 32 inches tall

#1033 • Metal spray stand

Measures approximately 31 inches wide by 18 inches deep by 34 inches tall

#1034 • 4x4 Timbers & Cage full of Wood Blocks

#1035 • 145 SR 12 tire with 4 bolt rim

#1036 • Antique Factory Cart, Steel wheels

Measure 72 inches wide by 26 inches deep by 20 inches tall

#1037 • Concrete urn, (2) clay planters

Urn measures 13 inches wide by 14 inches tall, planters measure 19 inches wide by 14 inches tall

#1038 • Factory cart

Measures approximately 96 inches long by 36 inches wide by 15 inches tall

#1039 • Reserve Air Tank

Approx 150 Gallons

#1040 • 2 x 2 inch 3/16 thick steel

56 inches long

#1041 • Various Wood Cut Offs and wire crate

Z4 x 6, 2 x 6 , 2 x 4

#1042 • Various wood pieces

Plywood pieces, 1 x 6 boards

#1043 • 55 gallon Barrel with cover

#1044 • (5) jack stands

11 inches tall

#1045 • (2) jack stands 16 inch

#1046 • (2) Jack Stands 19 inches tall

#1047 • Floor jack

#1048 • Model # 910-FL oil/grease rag disposal bin

#1049 • (6) blast helmets

#1050 • Pallet Box Full of Assorted Air Hose Pieces

#1051 • Homemade Recovery Hopper

24" diameter. 35" tall.

#1052 • Fairbanks Morse 1000lb Platform Scale

#1053 • Eye Hooks, Clevises, Chain Hooks, Hangers and more

#1054 • Assorted Nuts and Bolts

#1055 • Assorted Screws and Concrete Anchors

#1056 • 8ft Wood Stepladder

#1057 • 24ft Aluminum Extension Ladder

#1058 • Pipe Connectors & Clamps

#1059 • Precision Limit Switches & Hardware Lot

#1060 • Grounding Wires, Wire Connectors and PVC Box

#1061 • (6) 125 Volt Electrical Plugs

#1062 • Build-All SCL/30 Parts Washer-Degreaser

S/N: 12914151. 33 x 22 x 10" deep

#1063 • B&D Drill Press & Bench Grinder

Mounted on Sun Service Equipment Rolling Cart.

#1064 • Airco Dip/Stick 160 Welder

S/N: DG809153. Includes a Helmet and Gloves. Tank is also included.

#1065 • 4.5" Bench Vise

#1066 • Porter Cable 1400 Chop Saw

Not working, needs repair

#1067 • Wood Crate full of Metal

#1068 • Cable Grip Clamps, Elbows, Coaxial Staples

#1069 • NEW Makita 14" Metal Cutting Blade

#1070 • Electrical Wall Plates, Switches and Outlets

#1071 • Partial Voice & Data Cable; Telephone Cable;

Plus 6 Wire Junction Block; Modular Plugs

#1072 • 55 Gallon Metal Barrel

Some scrap metal inside

#1073 • (10) 1/2" Raintight Compression Couplings

#1074 • Assorted 1/2 to 7/8" Threaded Nipples

#1075 • Assorted Fittings, Rubber Fittings, Caulk Strip

#1076 • Disassembled 5.5" Bench Vise

Unknown condition

#1077 • (12) 16x16x1" Custom Made Risers

#1078 • (12) 16x16x1" Custom Made Risers

#1079 • Assorted 2" Pipe Fittings

Crate & Small Box

#1080 • Assorted Pipe Fittings & Teflon Tape

Up to 1-1/4"

#1081 • (3) 1-1/4 x 12" & (3) 1/2 x 12" Steel Nipples and More

#1082 • (11) Partial Spools of Electrical Wire

12 to 18 gauge

#1083 • Large Electrical Supplies Job Lot

#1084 • Allen Bradley Overload Relay; 24 Hour Time Switch;

Plus a Sylvania Magnetic Ballast

#1085 • Gamm Industries Oxide Blast Cabinet

This oxide glass cabinet comes with recovery system hopper and cabinet. Cabinet measures 60“ x 60“ x 60“. Buyer responsible for removal.

#1086 • Trinco Model DP850 Blast Cabinet

This Trinco model DP 850 measures approximately 60 inches wide 48 inches deep and 48 inches tall this two position blast cabinet comes with recovery system and hopper. Serial number 42168–5. Buyer responsible for removal.

#1087 • Gamm Industries Model 9P-DC9 Oxide Blast Cabinet

This Gamm Industries oxide abrasive cabinet mattress 48” x 48” comes with recovery system and hopper. Serial Number 02269901 Buyer responsible for removal.

#1088 • Gamm Industries Model DC7 -30 Blast Cabinet

This Gamm Industries glass speed blast cabinet comes with recovery system and hopper. Serial number 011-8911. Buyer responsible to remove.

#1089 • Blast abrasive stands and fixtures

#1090 • Partial pail of oxide abrasive

#1091 • Various floor steps

#1092 • 8 cavity locker

Measures approximately 26 inches wide by 21 inches deep by 84 inches tall, buyer to remove

#1095 • Home Light Tripod Work Light

#1096 • Microder MJR7000 Time Card Machine

Plus a box of time cards

#1097 • 55 Gallon Metal Barrel

Has very little liquid contents inside

#1098 • Paint Mixing Booth

Includes (2) Binks Sprayers, (2) 55 Gallon Metal Barrels, Hopper, (2) Smaller Barrels. Hangers not included. 80" across. 36" deep. 8ft tall. Buyer is responsible for disassembly and removal.

#1099 • 55 gallon metal barrel and barrels rings

#2000 • 55 Gallon Metal Barrel

#2001 • Partial roll of Tyvek

9 ft tall

#2002 • (2) 2 1/2 x 9 ft metal pipes

#2003 • (2) fork extensions

Measures approximately 6 1/2 inches wide by 60 inches long

#2004 • Heavy Metal stand with metal base 53 inches tall

#2005 • (3) 20 x 20 x 1" Air Handler Filters

#2006 • (3) 6 ft flexible conduit, 1 inch diameter

#2007 • Hanging file folders, sales books, messages, applications

#2008 • Phone cables, computer cables, power cords

#2009 • NAPA AwW -32 hydraulic oil

5 gallon pail appears full

#2010 • (4) metal hanging baskets

measures 14 inches diameter

#2011 • (2) circular, saw blade, and gear

One blade measures approximately 27 inches diameter the other blade 16 inches diameter

#2012 • (3) Flats on Vintage items

Vintage hand, cranks, carriage, steps, smelt, ladle, cast-iron decor

#2013 • Vintage items

Saw bicycle, guard, hand, plane, , drill, wrenches, spokeshave

#2014 • Amoco Vintage Wheel Greese tub, 1/2 Gallon oil dispenser

Oil dispenser embossed with Hoffman crest

#2015 • Cast-iron Oakleaf decor

One measure is approximately 16 inches the other 21 inches

#2016 • Nash Lafayette car Grill

Measures over 30 inches, some grill is broken

#2017 • Pallet rack

8 ft w by 3 ft d by 8 ft tall. contents of shelf not included. Buyer is responsible for disassembly and removal.

#2018 • Box with 1 inch diameter by 9 inch wooden dowels

#2019 • Diamond Vogel Industrial Paint Partial cans

Yellow Red Used cans

#2020 • (22) Diamond Vogel Industrial Paint Partial cans

Blue And Green Used

#2021 • (25) Diamond Vogel Industrial Paint Partial cans

White/ Light colors Used

#2022 • (35) Diamond Vogel Industrial Paint Partial cans

Black Brown Gray Used

#2023 • Diamond Vogel Industrial Paint New

#2024 • (10) Devoe Expoxy coating, primer, converter

#2025 • Carboline mixed used

#2026 • International Use Paint Colors

#2027 • Carboline New product

#2028 • International New Product

#2029 • Driveway crack filler, roofing cement, latex caulk

#2030 • TNEMEC Protective Coating

New and Used

#2031 • (17) Imron paint partial cans

Blue Green Used

#2032 • (27) Imron and Axalta Paint partial Used can

Brown Black Gray

#2033 • Imron partial paint cans

(36) Imron white and light colors

#2034 • Imron New A&B Gray, Black, White, Blue

#2035 • Axalta Corlar New Primer

 A & B

#2036 • (17) Imron and Axalta Used Paints

Yellow, Brown, Orange, Red

#2037 • Misc paints and solvents

#2038 • Sherman Williams, used mixed Colors

Protective and Marine Coatings

#2039 • Sherman Williams Polane A & B

New and some used

#2040 • Sherman Williams Pro Mix Colors

Partial Used Colors

#2041 • New Sherman Williams Pro Cryl A & B

#2042 • Sherman Williams Product Finishes New and Used

#2043 • Homemade Forklift Work Platform

48 x 48". 36" sides

#2044 • Vintage Snobil 6 gallon gas can

Dent noted on lower part of can, some rust, otherwise a nice shape

#2045 • 55 gallon metal barrel with cover

#2046 • (2) pails with partial mixed abrasive and scoop

#2047 • Vintage Atlas antifreeze thermometer

Measures 35 inches, the thermometer appears to be intact

#2048 • 5/16" x 5ft Chain

#2049 • American Lifts T36-022 Scissor Lift Table

1800lb capacity. 48 x 48". Not working, needs repair.

#2051 • Acetylene Torch with Harper Torch Cart; Harris Gauges

Tanks included. Cart in nice shape

#2052 • (2) jack stands, 16 inches tall

#2894 • Homemade Track System

Approx 36ft long. Welded together. A few extra pieces to complete loop are on shelf. Buyer is responsible for disassembly and removal. Buyer can schedule appointment with seller for removal.

#2895 • Homemade Heavy Duty Spray Booth Rolling Rack

82" long. 36" long. 75-1/2" tall

#2896 • Homemade Heavy Duty Spray Booth Rolling Rack

82" long. 36" long. 75-1/2" tall

#2897 • Homemade Heavy Duty Spray Booth Rolling Rack

82" long. 36" long. 75-1/2" tall

#2898 • Homemade Heavy Duty Spray Booth Rolling Rack

82" long. 36" long. 75-1/2" tall

#2899 • A-Bec Blasting Hopper

1989 Model Year. S/N: 892452-143. 23" diameter, 25" deep.

#2900 • Rolling Rotisserie Stand for Car Bodies

8 Ton Long Ram Jacks

#2901 • Commercial Spray Booth

Interior Dimensions: Approx. 38.5ft long. 14ft 8" wide. 10ft tall. Has track system inside. Overall length approx 42ft. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed.

#2902 • JBI IDPP-128-S Dry Filter Open Face Spray Booth

2000 Model Year. S/N: 30841. Exterior Dimensions: 149" across. 10ft deep. 8ft 10" tall. Interior Height: 96". Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed.

#2903 • Ingersoll Rand Dryer TMS 0380

CCN 42529016. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed.

#2904 • Ingersoll Rand IRN75H air compressor

22,954 hours - mostly unloaded. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed.

#2905 • (1) Reserve Air Tank for Air Compressor Pressure

Overall tank measures approximately 10 feet tall by 36 inches wide, tank itself measures approximately 9‘ x 36 approximately 500 gallon air tank. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed. Tank will need to be disconnected and laid down on its side for removal.

#2906 • (1) Reserve Air Tank For Air Compressor

Overall tank measures approximately 10 feet tall by 36 inches wide, tank itself measures approximately 9‘ x 36 approximately 500 gallon air tank. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed. Tank will need to be disconnected and laid down on its side for removal.

#2907 • (1) Reserve Air Tank for Air Compressor

Overall tank measures approximately 10 feet tall by 36 inches wide, tank itself measures approximately 9‘ x 36 approximately 500 gallon air tank. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed. Tank will need to be disconnected and laid down on its side for removal.

#2908 • Ingersoll Rand PacE II Flow Controller

Buyer is responsible for disassembly and removal.

#2909 • Plastic media abrasive blast booth

Measures approximately 15 feet wide by 23 feet deep. This booth was in use up until closing, it has extra panels to extend the booth. Recovery and Hopper built by Gamm Industries. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed.

#2910 • Oxide Blast Booth and Components

This oxide blast booth comes with heavy duty sealed doors, recovery system, ventilation system, blast system. This unit had been in service up until the date of closing. Measure is approximately 14 feet wide by 25 feet long. damage noted to exterior panel noted in pictures. Buyer is responsible for disassembly and removal. Buyer can schedule appointment for removal with seller if needed.