Component Machine Service Online Only Auction
Bidding opens on Tuesday, July 28th at 6:00am CT
Bidding begins to close on Tuesday, August 4th at 10:00am CT
3603 E. Beltline Drive – Hibbing, MN 55746
NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.
Auction Preview: Monday, August 3rd from 9:00 am to 3:00 pm CT
Auction Checkout: (Closing times are sharp)
Monday, August 10th from 9:00 am to 4:00 pm
Tuesday, August 11th from 9:00 am to 4:00 pm
Wednesday, August 12th from 9:00 am to 4:00 pm
Thursday, August 13th from 9:00 am to 4:00 pm
Friday, August 14th from 9:00 am to 2:00 pm
#.1 • READ IN FULL BEFORE BIDDING!
All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification. It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building. Auction Location: Component Machine Service 3603 E. Beltline Drive Hibbing, MN 55746 Associated Fees: Buyers Premium: 15% Loading Fees: Mandatory on items with posted loading fees Sales Tax:6.875% Card Convenience Fee: 4% Payment can be made onsite by Cash, Credit, Wire, Check (Checks from new bidders will NOT be accepted without a bank letter of guarantee). Wire Transfer instructions/Tax Exemption form will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Wire: Add $15 for Transfer Fee. Auction Preview: Monday, August 3rd from 9:00 am to 3:00 pm Auction Closing: Tuesday, August 4th Beginning at 10:00 am CST Auction Checkout: (Closing times are sharp) Monday, August 10th from 9:00 am to 4:00 pm Tuesday, August 11th from 9:00 am to 4:00 pm Wednesday, August 12th from 9:00 am to 4:00 pm Thursday, August 13th from 9:00 am to 4:00 pm Friday, August 14th from 9:00 am to 2:00 pm Payment and removal is due by 2:00 pm on August 14th. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Items remaining beyond 2:00 pm of August 14th will be considered abandoned regardless of payment status. If you have several items/time consuming items to pick up, DO NOT wait until the end of the day to show up. You will be charged an upfront fee of $150/Hour to keep the building open and staffed. Rigging: Under no circumstances will buyers be permitted to operate powered equipment onsite, whether purchased or brought here. TK Rigging will be onsite for loadout. Larger items will display a loading fee. This fee is mandatory and non-negotiable and will be added to your auction invoice. This fee covers a basic "pick up and set down" of the machine as displayed in the auction, onto buyer provided transport. It does NOT cover any disassembly/lay down/palletization/strapping/tarping of the item. If needed, you will be charged for additional services. TK Rigging is available for hire for any items without a posted load fee. Please contact Blake (TK Rigging) @ 612-720-1243 or blake@tkrigging.com to schedule your loadout, and for all other rigging related questions. Buyers/Hired transport must provided their own cribbing/dunnage/straps/chains/tarps for transport. There will be absolutely no scrap disassembly allowed anywhere on this property. This includes cutting with saw/torch, dragging/tossing of items, filling of dumpsters/roll-offs. Shipping: Available for "Hand Carry" Type Items Only. There will be a fee of $20 per lot to haul "BTO/UPS" items back to our warehouse for shipping or pickup from our Blaine, MN warehouse. Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up. UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300. The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in an irrevocable permanent ban from all future auctions. Please reach out to the contact below with any questions or for clarification of terms. Auctioneer: Jim Nelson (612) 991-7008 jim@premiermachineryauctions.com License no. MN 62-26-06
#1 • Athol MFG. #615, 5" Bench Vise.
Soft Jaws, Bolted to Bench. Buyer to Remove
#2 • (11) Solid Carbide Endmills.
Sizes from 1/2" x 4" to 1" x 4". Approx. 11 lbs
#3 • (90) Assorted 5C Collets.
Rack is NOT Included.
#4 • Lista 8-Drawer Cabinet.
Approx. 28" x 28" x 39-1/2" Overall. Note: No Key. Galvanized Top is NOT Included. Last Day Removal Only. NO EXCEPTIONS Rigging Quote Coming Soon.
#5 • Service R&D Co. Model DG73, Service Drill Pointer.
115V. Overall: 16" x 10" x 8".
#6 • Do-All Grinding Wheel Balancer
With Arbor. 6" Between Uprights, 18" Max Swing
#7 • Jacobs No. 20N Chuck with #3 MT Shank.
Capacity: 3/8"-1", Also Includes #3 to #4 MT Adapter.
#8 • Starrett #436 Micrometer Set with Wood Case.
0-1" (Missing) up to 23"-24", Standards, Metal Cart, Approx. 42" x 15" x 20" Overall.
#9 • Brown & Sharpe #558, Cylindrical Square
With Wood Case
#10 • Lawson Products Tru-Crimp 250 Installation Tool Kit
Metal Case.
#11 • 15" x 10" Tilting T-Slot Table.
#12 • Du Mont No. 10 Standard Broach Set
With Wood Case
#13 • Skoda #4 Taper Live Center with Interchangable Anvils.
CSN 24 3326, Currently in Lathe as Shown. Will be Removed Prior to Checkout.
#14 • Starrett No. 656-341, 1" Range Large Face Dial Indicator.
3-1/2" Dia. Dial Face, .001" Grad.
#15 • Accu-Finish Series 2, Tool Sharpener.
On Pedestal Base w/ (6) Various Grit Diamond Abrasive Wheels. (Some Appear Needing Replacement) Includes Meiji Microscope, Manual, and More. Grinder Alone Measures: 11" x 14" x 10". Overall: 28-1/2" 20" x 46". Not Including Microscope. Rigging Quote Coming Soon.
#16 • Vanderman 6" Pipefitters Benchvise.
With Pipejaws as Shown, 2-1/2" and 1-1/2" Stock Bending/Holding Built in Back Casting Holes. Includes Benchclamp. Overall: 8" x 24-1/2" x 12".
#17 • Hardinge Model HC, Vertical Cutoff Attachment
#18 • Gerstner 11-Drawer Oak Machinists Topper Box.
Includes Contents. Overall: 20" x 9-1/2" x 15-1/2".
#19 • Jacobs Spindle Nose Lathe Chuck
With (2) Sets of Flex Collets.
#20 • Cuttermaster MG-30, Tool and Cutter Grinder.
5" Wheel Capacity, 5C Air Spindle, Worklight, CM-16 Universal Grinding Fixture, s/n: 5852, 1/3 HP, 115 Volt, Approx. 28" x 28" x 20" Overall. NO BTO/UPS SHIPPING. Rigging Quote Coming Soon.
#21 • NSK 0-6" Micrometer.
.001" Grad.
#22 • (5) Pieces of Solid Roundstock.
Including: (1) 2-3/4" x 86", (1)2-3/4" x 151", (1) 4" x 144",(1) 5-1/2" x 108", (1) 7-1/2" Dia. X 120". Rigging Quote Coming Soon.
#23 • (2) Steel Beams.
(1) 171" x 9" x 5-3/4", (1) 17' x 5-3/4" x 10". Rigging Quote Coming Soon.
#24 • Milwaukee 9" Heavy Duty Sander.
120V. 13Amp.
#25 • Starrett No. 380, 48" Straight Edge.
2-1/2" Width. With Custom Case.
#26 • Kurt Model D60 Precision Machine Vise.
No Handle, Approx. 9"×18"×5".
#27 • Assorted Stock Material
Including Hex, Round, and Square Stock. Lengths Up to 144".
#28 • Tektronix 7904A Oscilloscope.
115 Volt, Cart Mounted. Located on Mezzanine
#29 • (36) Solid Carbide Endmills.
Dia. From 3/16" Up to 1".
#30 • Springfield Engine Lathe.
20" x 144" Rated Capacity, 15" 3-Jaw Chuck, 18" 4-Jaw Chuck, Spindle Speeds: 12-506 RPM, Taper Attachment, Tailstock, (2) Steady Rests, 2-Axis DRO, S/N: 52026. Approx. 228"×56"×75". Note Tool Post is NOT Included but can be found at lot #534 Rigging Quote Coming Soon.
#31 • Pair of 6" x 11-1/2" Angle Plates.
.
#32 • Large Quantity of Assorted Tooling.
Mainly HSS but Some Carbide. Types Include Porting Tools, Milling Cutters, Spotting Drills, Drills, Taps, Radius Cutters, Shell Reamers and More. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#33 • Enco Model 360, Mag-Base Indicator Stand
With Wood Box
#34 • Central Pneumatic Masking Paper Cart.
18" Roll Width
#35 • Wilton 4-1/2" Swivel Base Vise.
Overall: 8" x 20" x 9". Bolted to Bench. Buyer to Bring Tools for Removal.
#36 • Contents of Shelving Unit
Including Assorted Wire Spools, Conduit Pieces. Note: Large Diameter Wire on Floor in Photos is NOT Included. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#37 • Large Single Ph. 50 Amp Extension Cord.
8Ga. Wire, 18" x 11" Spool Dimensions. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#38 • Large Quantity of Stock Drops.
Square Stock Pieces From 4" x 2-1/2" x 5" Up to 5" x 5" x 11-1/2". Solid Round Stock Up to 9" Dia x 7", and More Shown. Material Includes Only Stock on the Floor. NONE Horizontal Pipe Shown on Rack.
#39 • Steel Heavy Duty Shop Cart.
Overall: 60" x 33" x 33-1/2". Contents Not Included.
#40 • Phase II no. 900-330 Rockwell Hardness Tester.
With Metal Stand. s/n: 1677 Rigging Info Coming Soon
#41 • Pigeon Hole Parts Organizer
With Contents. Approx. 35" x 12" x 41" Overall
#42 • Metal Workbench.
Vise is NOT Included, See Lot 149. Bench Approx. 72"×29"×34".
#43 • Large Quantity of Standard and Metric Taps.
Standard Sizes Up to 1-1/8-7, Metric Up to M24x3.0. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#44 • Group of Assorted Hydraulic Tools
Including: Bottle Jacks, Central Hydraulics 10-Ton Pump, Enerpac and SPX Cylinders and More
#45 • Oxy-acetylene Torch Cart
Bottles not Included. Includes Hoses, Regulators, Torch, Assorted Tips and Torch Goggles.
#46 • Assorted Hardware, Mostly SHCS.
All Items will be Removed from Drawer and Placed into Cardboard Tote by Preview Date.
#47 • Metal Shelving Unit with Contents.
Shelving Unit Measures: 37" x 12" x 84". Contents Include Large Swivel Casters, Machine Components, Hardware, and More.
#48 • (3) Angle Blocks.
(1) 6" x 5-1/2" x 6", (1) 8" x 6" x 6", (1) 19-1/2" x 5-3/4" x 6".
#49 • Large Quantity of HSS Letter Drills.
Mostly Straight Shank, Also Includes MT#3 Taper Shank Drills. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#50 • (5) Assorted Micrometers
See Photos
#51 • Eron 6" Speed Vise.
Approx. 9"×16"4".
#52 • (24) Solid Carbide Endmills
Largest is 1" x 6". Approx 11 lbs
#53 • (38) Assorted Taps.
Sizes to 1-1/4"
#54 • Eutectic Rototec Weld paint sprayer Kit
#55 • Strongway 36" Dia. Shop Fan.
2-Speed. Overall: 39" x 11" x 39". 120V.
#56 • Nutting Warehouse Cart.
60" x 36" Deck, 19" Distance to Deck Height. Contents Not Included.
#57 • Cushman 12-1/2" Dia. 3-Jaw Chuck. On Fixture Plate.
Approx. 2-1/2" Hole Through. Fixture Plate Measures: 13-1/2" x 13-1/2".
#58 • Contents of Shelving Unit
Including: Electric Motors, Plug Ends, Conduit and More. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#59 • Group of Solid Carbide Endmills
Mostly 3-3/8" L x 1/4" and Approx 12 lbs
#60 • Hartford Model 2S Vertical Milling Machine.
9"x42" Table, (8) Belted Speeds from 80 to 2,720 RPM, Power Feed, Spaulding 2-Axis Readout, 2 HP, 230 Volt, 3-Phase, S/N: 791594, Approx. 60" x 68" x 80" Overall. Rigging Quote Coming Soon.
#61 • Shop Made Angle Plate.
17-3/4" x 40" x 1" Face, 24" x 18" Base, Approx. 550 lbs. Rigging Quote Coming Soon.
#62 • Webber RC112MA Gauge Block Set
With Wood Case. Blocks to 100mm.
#63 • Fowler 24" Dial Caliper.
0.001"
#64 • (5) Pieces of Stock Steel
(1) 7-1/2" Dia. X 5/8" Wall Thickness at 18', (1) 4-5/8" x5/16" Wall Thickness at 64", (1)Approx. 6-1/2" Dia. X 3/8" Wall x approx. 16', (1) 2-5/8" Hex Stock at 109" Length. And (1)2-3/8" Pipe at Approx. 18'.
#65 • Baldor Cat. No. 8107W, Double End 8" Pedestal Grinder.
3/4 HP, 115/230V. (Currently wired for 115V) 3450 RPM, (1) Side with Wire Wheel, (1) Side Grinding Stone, Lighted Safety Glass, Overall: 22" x 15" x 48". Rigging Quote Coming Soon.
#66 • 6" 3-Jaw Chuck with Threaded Mount.
Inside Diameter Approx. 1-7/8", Approx. 1-3/4" Thru Hole.
#67 • Lista 8-Drawer Cabinet
With Contents. Approx. 28" x 28" x 39-1/2" Overall. Note: No Key. Galvanized Top is NOT Included. Last Day Removal Only. NO EXCEPTIONS. Rigging Quote Coming Soon.
#68 • (2) Pneumatic Belt Sanders.
.
#69 • (4) #5 MT Adaptors.
(1) #2 to #5, (1) #3 to 5, (2) #4 To #5.
#70 • Tester Model S, Vertical/Horizontal Band Saw.
s/n: 63239, 1-Phase, Approx. 46" x 22" x 56" Overall
#71 • Detroit Diesel Allison Banner
34" x 42" Height Banner Only.
#72 • Box of HSS Endmills.
Sizes up to 1-1/2" Diameter
#73 • Pair of Milling Machine Vee-Blocks.
3-1/4" Distance Between Top of Vee. 3-1/2" Height
#74 • Black & Decker 10" Radial Arm Saw .
With Aluminum Cutting cutting tool and Custom Aluminum Fixture Table for Material Holding. 120V. Overall: 40" x 30-1/2" x 62". Rigging Quote Coming Soon.
#75 • Empire Model Super-350, Blast Pot.
20" x 30" Blast Pot, Includes Respirator Mask and Hoses. Overall: 18" x 30" x 48". Rigging Quote Coming Soon.
#76 • Troyke 15" Rotary Table,
5-1/2" Table Height, Vertical Mount, Approx. 18" x 18" x 8". BTO/UPS:NO Rigging Quote Coming Soon.
#77 • (11) Pieces of Steel Stock Material.
(1)5-1/2" Dia x 72" Length, (1) 9" Dia x 3/4" Wall Thickness Stock at 120" Length, (1) 7-1/2" Dia x 5/8" Wall Thickness at 120" Length, and (8) 2" Dia. SOLID roundstock at 144" Length
#78 • (3) 10' x 36" x .040" Sheets of 301 SS.
Top Sheet Shows Circled Imperfections
#79 • CAT 3208 Diesel Engine.
Seller States: Needs Rebuild. Non-Functional. Rigging Quote Coming Soon.
#80 • Custom Built Hydraulic Sheet Roller.
Central Machinery 50" x 16 Ga. Rated Capacity, Approx 3-1/4" Roller Diameter, Vickers 5 HP Hydraulic Power Unit, 208-230/460 Volt, 3-Phase, Steel Frame, Approx. 97" x 32" x 58" Overall. Rigging Quote Coming Soon.
#81 • Empire Model DC-4, Collection Cabinet
Approx. 12" x 20" x 58".
#82 • Metal Shop Bench with 2-Door Cabinet and Drawer.
Approx. 106"×28"×34". Contents NOT Included.
#83 • Pile of Electrical Wire.
1/2" to 1" Diameters, Roughly 34" dia. Pile. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#84 • (14) Assorted Taps.
Sizes to 1-3/4"-5
#85 • Dake Model 5-050 H-Frame Press.
With Dake Elec-Draulic Ram. 32-1/2" Between Uprights, 14" Bed Depth, 2-1/2" Ram Diameter, 2 HP, 230/460 Volt, 3-Phase. Approx. 48" x 40" x 90" Overall. Rigging Quote Coming Soon.
#86 • Mitutoyo 24" Vernier Caliper.
#87 • KAR Products Small Parts Organizer
And (2) Small Plastic Organizers with Contents as Shown. Entire Stack Measures 20-1/2" x 17" x 67"
#88 • Canon iPF780 Large Format Printer/Plotter.
115 Volt, Approx 53" x 30" x 37" Overall
#89 • Large Assortment of Solid Carbide Endmills
Approx. 4 Lbs
#90 • Kuraki Model KV700-B CNC Vertical Machining Center.
Fanuc 11M Control, Table: 29"×20", X-Travel: 28", Y-Travel: 16", Z-Travel: 19", Max. Spindle Speed: 5,000 RPM, BT-40 Spindle, 24-Tool Automatic Tool Changer, Daikin AKS53 Oil Chiller, Chip Auger, 220 Volt, 3-Phase, S/N: 2820. Approx. 118"×108"×114" and Approx.13,000 lbs. Rigging Quote Coming Soon.
#91 • (3) Boxes of Assorted Carbide Inserts
Approx. 12 lbs
#92 • 24" x 24" Angle Plate.
1-3/4" Thick. With 25" x 24" Base Plate. Rigging Quote Coming Soon.
#93 • (2) Sets of Parallels.
(1) Set Missing One Parallel as Shown.
#94 • (6) Workholding Screw Jacks.
(5) Mostly Complete Kits.
#95 • Dayton Model 2Z646, 1" Belt Sander.
9" x 7" Worktable. 120V. Overall: 10" x 22" x 55". 120V.
#96 • 3" x 1" x 10' Length of Solid Aluminum Rectangular Stock
#97 • Assorted Pneumatic Tools.
Including paint sprayers, Dual Piston 16" x 2" Sander, Air Sprayers, and More.
#98 • Thor 1" Pneumatic Impact.
With 1" to 3/4" Adaptor.
#99 • Metal Shelving Unit with Contents
As Shown. Approx. 36" x 12" x 84" Overall
#100 • Tru-Stone 53" x 60-1/2" x 12" Granite Surface Plate
On Metal Stand. Approx. 41" Table Surface Height, Plate Cover, s/n: 100249, Approx. 53" x 60-1/2" x 41" Overall. Rigging Quote Coming Soon.
#101 • Custom Built Double End Grinder.
6" Wheel Cap. Overall: 20" x 16" x 50". 120V.
#102 • (2) Geometric Threading Head.
(1) Rubometric Model D9/16, (1) Geometric With Large Quantity of Dies.
#103 • Specialty Buffer.
6" Max Wheel Dia. 1/3 HP, Non Stone Wheel.
#104 • Starrett No. 359 Bevel Protractor
With Wood Case
#105 • Expanding Reamer Set
With Wood Case. 21/32" to 23/32" up to 1-11/32" to 1-1/2". Note: Incomplete Set
#106 • Lawson Products Small Parts Cabinet
With Contents as Shown. Approx. 35" x 12" x 51".
#107 • Nutting Flatbed Cart.
35" x 60" Deck, 19" Deck Height.
#108 • Cast Workholding T-Slotted Riser Block.
21" x 14" T-Slotted Surface. 9" Height. Stock Material on Top Not Included. Rigging Quote Coming Soon.
#109 • 15" Dia. 3-Jaw Workholding Fixture.
Mounted to 20" x 19-3/4" x 3" Steel Platestock Fixture. Includes Various Jaw Options as Shown. Rigging Quote Coming Soon.
#110 • Metal Rigging Cart
With Assorted Chains, Clevises, Chain Binders and More. Approx. 52" x 32" x 54" Overall. Rigging Quote Coming Soon.
#111 • Assorted Mostly Carbide Endmills.
Dia. From 3/8" Up to 3/4".
#112 • Lawson Products Small Parts Organizer.
With Contents as Shown. Approx. 21" x 16-1/2" x 52-1/2" Overall.
#113 • Pigeon Hole Shelving Unit
With Contents as Shown. Approx. 36" x 12" x 84" Overall
#114 • (12) Solid Carbide Endmills.
Mostly Around 5/8" x 6".
#115 • Sinco, Type T02 Welding Positioner.
19" Dia. Turn Table with 13" Dia. 4-Jaw Chuck. Foot Pedal Control, Variable Speed Turn Table, Mounted to Rolling Cart. 36-1/2" Height From Bottom of Machine Not Including Cart to Fixture Table. Overall: 40" x 32" x 58". Machine Has Built In Adjustable Welding Arm as Shown. Rigging Quote Coming Soon.
#116 • Mitutoyo no. 192-114, .001-24" Dial Height Gage.
Missing Dial Glass, with Cover
#117 • Standard no. 226, Dial Bore Gage
With Wood Box, .0005"
#118 • (3) Keyless Drill Chucks.
(1) Albrecht 1/32" to 1/2" Cap. On 1-1/2" Dia. Straight Shank, (1) Albrecht 1/8" to 5/8" Cap. On MT#3 Shank w/ Adaptor to #4 MT Shank. (1) Horton Chuck Co. Shown.
#119 • (8) Solid Carbide Endmills.
Up to 1" x 6" and Approx 13 lbs
#120 • Hardinge Model HLV-H Precision Toolroom Lathe.
Variable Speeds from 125-3000 RPM, Taper Attachment, 5" 6-Jaw Chuck, 1.5 HP, 220 Volt, 3-Phase, S/N: HLV-H-H-1529, Approx. 69" x 32" x 62" Overall. Rigging Quote Coming Soon.
#121 • Large Group of Solid Carbide Endmills and Reamers.
Approx. 11 lbs
#122 • Large Aluminum Angle Plate.
1-1/4" Faceplate Thickness, 1-5/8" Bottom Plate Thickness, 63" x 40" Face, 63" x 14" Base, Approx. 63" x 15-1/4" x 40-1/2" Overall. Rigging Quote Coming Soon.
#123 • Approx. (50) Assorted BT-40 Tool Holders.
Includes Boring Head, Tap Holder, Endmill and Collet Holders. Buyer to Bring Containers for Removal. BTO/UPS: NO Lot number has been changed
#124 • Palmgren 4" Drill Press Vise
Lot number has been changed
#125 • Large Reamer Set
With Wood Case. 1/4" to 1-1/4"
#126 • Import cutting tool Welder
With Metal Stand. 220 Volt, Approx. 18" 20" x 16"
#127 • Metal Shop Cart
with Center Point Lifting Brackets Shown in 4th Picture. Overall: 32" x 17"x 32". Contents Not Included.
#128 • Metal Shelving Unit.
Overall: 36" x 16" x 39-1/2". Contents Not Included.
#129 • Contents of (1) Level of Stock Rack.
(2) Pieces of Square Tube, 6" x 1/4" x 89-1/2" and 6" x 5/16" x 145", and More
#130 • Walker-Turner Floor Standing Drill Press.
10" Throat, 18" x 15-1/4" Table, #2MT Spindle, 1 HP, 208-230/460 Volt, 3-Phase, s/n: 52E3B3, Approx. 24" x 40" x 75" Overall. Rigging Quote Coming Soon.
#131 • Assorted Keyseat Cutters.
.
#132 • (5) 2" Wide Shop Rolls of Abrasives.
From 80 Grit Up to 320.
#133 • (2) Light Duty Tube Benders.
(1) 5/16" O.D. Tube Cap. (1) 1/2" O.D. Tube. Cap.
#134 • Custom Drill Index Stand with Misc. Drills.
Each Level with Stamped Drill Sizes. Drills Including MT#3, MT#2, Straight Shank, Reduced Shank, and More. Stand Measures: 13" Dia. X 37".
#135 • Contents of (1) Level of Stock Rack.
8-3/4" x 3/4" Wall x 103" L Round, Longest Piece is Approx. 11'
#136 • 64" x 30" x 1" Steel Plate.
Also Includes 21" x 24" x 1-5/8 Plate with end Needing to Be Cut off to Make it Square. Rigging Quote Coming Soon.
#137 • Large Assortment of Carbide Endmills
Approx. 17 lbs
#138 • Assorted Milling Cutters.
.
#139 • Federal IDS-8, Centralizing Hole Gage
With Wood Case, .0001"
#140 • Sullair Model 300-DP, Portable Air Compressor.
300 CFM Rated Capacity, 80-200 PSI Output Range, Detroit Diesel Motor, s/n: 40464 CGH, Approx. 74" x 144" x 110" and 4400 lbs Overall. Note: Flat Tire. Rigging Quote Coming Soon.
#141 • (7) MT#4 Adaptors.
(3) #4 to #3, (4) #4 to #2.
#142 • Standard Tool Co. Decimal Equivalents Sign.
15-3/4" x 22-1/2". Sheet Metal with Cardboard Backing.
#143 • Dillon 7500 Lb. Dynamometer
50 Lb. Divisions. 6" Dial Face with Case.
#144 • Budgit 1/2 Ton 120V. Roller Chain Hoist.
.
#145 • Famco 3 Ton Arbor Press with Stand.
8" Throat, 12" Stroke Length, Arbor Press Alone Measures: 12" x 18" x 33" Not Including Handle. Overall with Base: 27" x 21" x 63". Rigging Quote Coming Soon.
#146 • (2) Large Pittsburgh Adjustable Wrenches.
(1) 18", (1) 24".
#147 • Group of Assorted Hone Tooling
#148 • 60" x 30" Warehouse Cart.
14-1/2" Height to Deck.
#149 • Jet 6" Swivel Base Bench Vise.
Overall: 13" x 21" x 11". Table Not Included.
#150 • Chevalier Model FCL-2480 CNC Lathe.
12" 3-Jaw Chuck, 15" 4-Jaw Chuck, Tailstock, Steady Rest, 230 Volt,3-Phase with Model 36B Transformer, S/N: X4877 006. Approx. 180"×65"×80". Note: Tool Post is NOT Included but can be found at lot #340. Rigging Quote Coming Soon.
#151 • Fine Tools Model BG-8, Double End Buffer.
8" Buffing Wheels, 3/4 HP, 3450 RPM, 110V. Single Ph. Overall: 18" x 8" x 11".
#152 • Heinrich 8" Speed Vise.
Approx. 11" × 20" × 4-1/2".
#153 • Kurt D675, 6" Machine Vise.
With Stubby Handle.
#154 • (20) Solid Carbide Endmills.
Smallest 7/8" x 3", Largest 1" x 5", Approx 24 lbs
#155 • Baldor Cat. NO. 1406W, 5HP Double End Pedestal Grinder.
8" x 2-1/2" Cap. Grinding Wheels, 1800 RPM, 230V. 3Ph. Overall: 38" x 16" x 56". Rigging Quote Coming Soon.
#156 • (10) Solid Carbide Endmills.
Smallest is 1/2" x 3", Largest is 5/8" x 6". Approx. 5 lbs
#157 • (7) 12" C-Clamps.
#158 • Starrett no. 123, 26" Vernier Caliper
With Wood Box, .001"
#159 • Metal Shelving Unit with Contents
As Shown. Shelf Measures 36" x 12" x 84"
#160 • Hypertherm Powermax 1100, Plasma Cutting Power Supply.
208-240/480 Volt, 1/3 Phase, s/n: 1100-015885
#161 • Pigeon Hole Shelving Unit
With Contents as Shown. Approx. 36" x 12" x 84" Overall.
#162 • Shop Made Welding Table.
72" x 48-3/4" x 1/2" Top Plate, 39" Table Height. Vise and Contents are NOT Included. Rigging Quote Coming Soon.
#163 • Lista 8-Drawer Cabinet
Approx. 28" x 28" x 39-1/2" Overall. Note: No Key. Galvanized Top is NOT Included. Last Day Removal Only. NO EXCEPTIONS. Rigging Quote Coming Soon.
#164 • Phase II 105x105 V-Block Set
With Wood Case
#165 • Johnson Gas Appliance Co. No. 142-5, Forge.
Natural Gas Fuel Source. 180,000 BTU/Hr. 11" x 18" x 8" Inside Chamber, Forge Alone Measures: 32" x 32" x 53" Not Including 24" x 9" Steel Material Slide In Shelf. Custom Vent Hood Not Attached Availiable Until Elbow in Ceiling. Rigging Quote Coming Soon.
#166 • "HITCH Hand" Truck Bed Extender.
.
#167 • Large Quantity of Assorted Hand Tools.
.
#168 • 48" x 62" x 1" Thick Steel Plate.
Rigging Quote Coming Soon.
#169 • Strongway 36" Drum Fan.
120 Volt
#170 • General Electric Type WD4200, 200 Amp Arc Welder.
200 Amps, 30 Volts @ 50% Duty Cycle, 3-Phase, Approx. 40" x 21" x 26" Overall.
#171 • VIS 12" Precision Level
With Wood Case
#172 • Metal Rack with Stock Drops.
Rack Measures 48" x 20" x 51" Overall.
#173 • Pigeon Hole Parts Organizer
With Contents. Approx. 35" x 12" x 42" Overall
#174 • (37) Solid Carbide Endmills.
Mostly Around 5/8" Dia. And Lengths from 3" to 6". Approx. 20 lbs
#175 • Lincoln Electric Model SP-125 Plus, Single Phase Mig Welder
Tank Not Included. Output: 28 Max OCV, 90 Amps, 20% Duty Cycle, 18V. At 20 Amps, 63 Amps, 20% Duty Cycle, 20V. At 15 Amps. Input: 115V. Single Ph. 20 Amp or 15 Amp Input. Includes (3) additional Spools of Welding Wire.Welder Alone Measures: 10" x 16" x 12". Overall On Cart. Not Including Bottle: 15" x 37" x 52".
#176 • Assorted Number and Letter Stamps
#177 • Lawson Products Small Parts Cabinet
With Contents as Shown. Approx. 35-1/2" x 12" x 51" Overall
#178 • Hardinge L18 2-Sided Tool Post
With L23, L21 Holders.
#179 • Shelving Unit Full of Taper Shank Drills and Reamers.
See Photos for Sizes, Cabinet Measures 73-1/2" x 18-1/2" x 84" Overall. BTO/UPS: ABSOLUTELY NOT
#180 • (2) Brown & Sharpe Inspection Pieces.
Including No. 607, Depth Micrometer With Anvils From 0-1" Up to 8-9" Anvils. And 6" .001" Grad Dial Caliper.
#181 • (3) Assorted Drill Indexes
All Partial
#182 • Contents of Shelving Unit
Including Small Parts Organizers with Contents, Large Nuts and More. BTO/UPS: NO
#183 • Pigeon Hole Shelving Unit
With Contents as Shown. Approx. 36" x 12" x 84" Overall.
#184 • Large Group of Broach Tooling
#185 • 6" Swivel Base Bench Vise.
Approx. 8" Holding Cap. Overall: 10" x 21-1/2" x 10".
#186 • Dremel Model 4000 with Case,
Assorted Bits
#187 • (16) Assorted Taps.
Sizes to 1-7/8"-12UN
#188 • (18) Solid Carbide Endmills.
Smallest 3/4" x 2-3/4", Largest 3/4" x 6". Approx. 12 lbs
#189 • Appears New Sumitomo 1" Indexable Endmill.
Type: WEX31000EW,
#190 • Farrell Sellers 6GA Tool and Cutter Grinder.
Approx. 10" Wheel Capacity, 2 HP, 220/440 Volt, 3-Phase, s/n: 61R2768, Approx. 38" x 52" x 55". Rigging Quote Coming Soon.
#191 • Scherr-Tumico .0005" Dial Bore Gage
With Case.
#192 • Big Kaiser Boring Components.
Includes (3) Bridge Bars and (1) 317.112A EWN150E-FK Finish Boring Head. Lot number has been changed
#193 • Shop Built Steel Workbench
Approx 60" x 21" x 58" Overall. Rigging Quote Coming Soon.
#194 • Assorted #2 Taper Lathe Tooling
Including: Jacobs 34-06 Drill Chuck, Live Center, Enco MFG. 1156 Keyless Drill Chuck with #3MT Adapter
#195 • Miller Spectrum 375 X-Treme, Dual Voltage Plasma Cutting System
#196 • Starrett No. 684, Chamfer Gage.
127 Degree ID, 0-1/2, .001", with Case and Box.
#197 • Starrett no. C359, Bevel Protractor
With Wood Case
#198 • Lawson Products Fractional Drill Cabinet
With Bits.
#199 • (9) Assorted C-Clamps.
6" to 15".
#200 • Ingersoll Rand UP6-15c-125, 15 HP Screw Compressor.
125 Max PSI, 230/460 Volt, 3-Phase, s/n: CBV249355, Hour Meter Reads: 54472 (Hours will Increase), Approx. 41" x 39" x 62" Overall. Rigging Quote Coming Soon.
#201 • (4) Phase II, Quick Change Tool Holders (AXA Size)
250-101, 250-102, 250-107, 250-110, 250-104
#202 • Assorted Endmills, Drills, Inserts, Taps, Reamers and More.
All Items will be Removed from Drawer and Placed into Unorganized Cardboard Tote by Preview Date.
#203 • Tapmatic Model 30 TC/DC Reversible Tapping Attachment on MT#2 Shank w/ R8 Adaptor.
#0-1/4" Cap.
#204 • (5) Straight Shank Boring Tools.
(1) Adjustable Criterion Type with 1/2" Holes and Insert Type Boring Bar, and More Shown.
#205 • 32" x 16" Parts Washer.
Includes Washing Baskets, and Tools, 8" Basin Depth. Parts Washer Measures: 32" x 18" x 36". 120V. Sprayer.
#206 • Large Quantity of Tapered Shank Solid Carbide and HSS Endmills.
Degrees From 1° Up to 15°. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#207 • DoAll Black Granite Inspection Plate.
18"×12"×3-1/2".
#208 • (2) Angle Plates.
(1) Approx. 12"×10"×7-1/2"×1" and (1) Approx. 8"×10"×7-1/2".
#209 • Group of Starrett Inspection
Including No. 446, Depth Gage, no. 196, Dial Indicator, and More
#210 • (3) Micrometers
(1) 0-1" .0001" Grad. (1) General 1-2" .001" Grad. (1) General 2-3" .001" Grad.
#211 • Contents of Shelving Unit
Material, Pipe Fittings and More
#212 • Contents of Shelving Unit
Including: Wire Spools, Flex Conduit, Old Phones. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#213 • 75' Spool of 4Ga. - 4 Line 3-Ph. Cable.
Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#214 • Contents of Shelving Unit
Including: Electric Motors, Junction Boxes, Switches and More. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#215 • Buffalo No.2 Arbor Press.
6" Throat, 9" Ram Stroke, Overall: 7" x 16" x 19".
#216 • Tapmatic 90X Reversible Tapping Attachment.
1/2" to 1-1/8" Capacity. 600 Max RPM. #3MT Shank with #3-#5 Adapter
#217 • Lawson Products Stackable Storage Unit.
Buyer Can Take or Leave Paint Cans. Approx. 20" x 15-3/4" x 74" as Shown
#218 • (2) Vintage Adjustable Height Shop Stools.
.
#219 • Large Group of Carbide Endmills
Approx. 9 lbs
#220 • Homak 3-Piece Mechanics Tool Box with Contents.
5-Drawer Topper Measures: 26" x 13-1/2" x 13", 3-Drawer Riser Measures: 26" x 13-1/2" x 9-1/2", and Rolling 3-Door Cabinet Base Measures: 26-1/2" x 18" x 33".
#221 • (2) Brown & Sharpe Thread Micrometers
25-50mm and 75-100mm, and Measuring Wire Kit
#222 • Jacobs No. 16N Drill Chuck and MT Adaptors.
1/8" to 5/8" Cap. #3 MT Arbor with #3 to #4 Adaptor, and Additional MT Adaptors Shown.
#223 • Mitsui Seiki JC3M, 13-3/4" Rotary Table.
5" Table Height, Approx 20" x 18" x 5" Overall. BTO/UPS:NO
#224 • Snap-On L-72N, 3/4" Drive Ratchet.
With Small Snap On 3/4" Extension. 24" Length.
#225 • Miller Deltaweld 451, CV DC Arc Welding Power Source.
Rated Output: 38 Volts, 450 Amps @ 100% Duty Cycle, 48 Max OCV. Input: 200/230/460 Volt, 3-Phase, s/n: KD392942, with Miller 24V Constant Speed Wire Feeder, Cart Mounted, Approx. 24" x 54" x 60" Overall. Note: Gas Bottle NOT Included. Amount of Wire on Reel May Change as Company is Still in Operation at Time of Photography. Rigging Quote Coming Soon.
#226 • Nutting Warehouse Cart.
60" x 36" Deck, 19" Distance to Deck Height. Contents Not Included.
#227 • Approx. (57) Assorted ER20 Collets.
With Rack, 1/8" to 1/2".
#228 • (2) Indexable Shell Mills with Inserts.
(1) 3", (1) 3-1/2".
#229 • Assorted Pipe Threading Items
Including: Pipe Vise, Cut-Off and Thread Chasers
#230 • Thor B6S, Double End Grinder.
6" Wheel Capacity, 1/3 HP, 115 Volt, Heavy Gear Base, Approx. 21" x 18" x 51" Overall. Rigging Quote Coming Soon.
#231 • Kurt II 8" Machine Vise.
No Handle
#232 • (2) Wall Mounted 5C Collet Racks.
Mounted with Tapcons. Buyer Responsible for Removal. BTO/UPS:NO
#233 • Large Group of Assorted Taps and Threading Dies.
See Photos for Details
#234 • (12) Solid Carbide Endmills.
Smallest 3/4" x 5", Largest 1" x 5". Approx. 19 lbs
#235 • Peterson Geared Head Drill Press.
(6) Speeds from 60-820 RPM, 44" x 32" Table, 12" Throat, 1 HP, 220/380 Volt, 3-Phase, s/n: N-1106, Approx. 45" x 41" x 80" Overall. Rigging Quote Coming Soon.
#236 • Lawson Products Small Parts Organizer
With Contents, Approx. 20-1/2" x 17" x 52" Overall.
#237 • Group of Solid Carbide Endmills and Tool Bits
Approx. 12 lbs
#238 • (3) Vintage Snap-On Torque Wrenches.
#239 • Brown Boveri 12"×6" Compound Sine Plate.
Approx. 13"×7"×7".
#240 • Empire Model GB-2632P, Abrasive Blast Cabinet.
With Model DC75 Collection System, Model BBO Basket Blaster. 24" x 32" Cabinet ID, 1/2 HP, 230 Volt, 1-Phase, Approx. 35" x 43" x 80" (Cabinet), 21" 27" x 60" (Collector), 17" 20" 31" (Basket Blaster). Rigging Quote Coming Soon.
#241 • Assortment of Eye Bolts, Lifting Shackles
#242 • Group of Material Drops.
#243 • (8) Pieces of 3-1/2" Dia. Steel Solid Round.
Lengths from 10" to 18-1/2".
#244 • (2) Spools of ESAB Welding Wire.
(1) Shield Bright 309L, Stainless Wire. .035", (1) Dual Shield 7100 Ultra .035".
#245 • Metal Shelving Unit
With Contents of Welding Consumables, Masks, Tools and More. Gas Bottles in Photos are NOT Included
#246 • Fowler 12-16" Micrometer
With Standards and Wood Case.
#247 • Metal Shelving Unit with Contents
As Shown. Shelving Unit is 36" x 12" x 84"
#248 • Assorted Large Dia. Endmills.
Dia. From 1-1/4" Up to 2". Including 2-Flute, Roughing, and More. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#249 • Custom Built Die Lifter.
16" Max Opening of Jaws. 7-1/2 Opening Distance When Closed.
#250 • LeBlond Makino Model FNC-106/A30, CNC Vertical Machining Center.
Fanuc Series 15-M CNC Control, Table: 24"×55", Max.Table Load: 3,300 lbs., CAT-50 Spindle Taper, X-Axis: Travel: 41", Y-Axis Travel: 20", Z-Axis Travel: 20", 30-Tool Automatic Tool Changer, Chip Conveyor, 20 HP, 440 Volt, 3-Phase, Includes 440V to 220V Transformer, S/N: A89-1999. Approx. 144"×167"×134"and Approx. 20,000 lbs. Rigging Quote Coming Soon.
#251 • L-W Chuck 4-1/2" Vise on Swivel Base.
No Handle, Approx. 9"×14"×5".
#252 • Matched Pair No. U686 6"×8"×6" Angle Plates.
Also Marked LH-101, in Wood Storage Boxes.
#253 • Palmgren 4" Vise with Palgren No. 400 Lathe Milling Attachment.
Approx. 14"×7"×10".
#254 • 6" Machine Vise on Swivel Base.
Overall: 10" x 17".
#255 • Large Quantity of Number Drills
Also Includes Huot A-Z Drill Index with Drills. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#256 • Equipto Metal Workbench.
Overall: 70" x 27-1/2" x 34" Height to Table Top. Vise and Contents Not Included. Built in 120V. Outlets on Both Sides
#257 • Starrett no. 696, Crankshaft Distortion Dial Gage.
.001", Wood Case and Box
#258 • Pigeon Hole Shelving Unit
With Contents as Shown. Approx. 36" x 12" x 84" Overall
#259 • Metal Shelving Unit with Contents
As Shown. Cabinet Drawers are Fairly Empty, Cabinet Measures 36" x 12" x 84" Overall.
#260 • Clausing Kondia FV-1 Vertical Milling Machine.
9" x 48" T-Slotted Table, R8 Spindle, Proto Trak Plus Control, Power Axis on All Feeds, Kurt Power Drawbar, 2.2 KW, 230 Volt, 3-Phase, s/n: V-338, Approx. 72" x 77" x 89". Rigging Quote Coming Soon.
#261 • Assorted R8 Tooling
Including Collets from 1/8" to 7/8", 1" Endmill Holder
#262 • Jet 6" Bench Vise
With Swivel Base. Bolted to Bench. Buyer to Remove
#263 • Lawson Products Small Parts Cabinet
With Contents as Shown. Approx. 35" x 12" x 75" Overall.
#264 • Shelving Unit with Contents
Of Assorted Gear Pullers/Attachments and More. Cabinet Measures 36" x 12" x 84"
#265 • (19) Solid Carbide Endmills.
Smallest is 1/2" x 2-3/4", Largest is 7/8" x 4-1/2"
#266 • Group of Square and Hex 5C Collets
#267 • Catalog No. 1551, Mag Base Drill.
Jacobs Chuck, 1-Phase.
#268 • Import .061-.250 Pin Gage Set
Incomplete
#269 • (2) Reamer Sets with Wood Cases.
#270 • High Horse Model XK-1, Manual Man-Lift.
400 lb Load Capacity, 6' 6" to 16' Lift Height, Approx. 84" x 34" x 82" Overall. Rigging Quote Coming Soon.
#271 • Vintage 7-Drawer Cabinet.
Approx. 48" x 31" x 39" Overall. Contents NOT Included.
#272 • Group of Large Taps, Dies and Handles.
BTO/UPS:NO
#273 • Manual Die Lift Cart.
20" x 16" Platform
#274 • Spool Of 3/8" Thick Bare Stranded Copper
Also Includes Additional Cable and Wire on Top of Spool as Shown. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#275 • Assorted Small Dia. Material
Including: 1/4" Solid Hex Steel, 1/4" to 1/2" Plastic Round and More. Lengths to Approx. 12'
#276 • Assorted Stock, Mostly Aluminum.
Including: Solid Round and Hex, Square Tube, Angle and Solid Rectangle. Lengths to 12'
#277 • Contents of (1) Side of Stock Rack
Including: Solid Hex, Solid Square, Solid Round, Flat, Tube. Lengths to 12'
#278 • Vintage Detroit Diesel Wall Clock.
Approx. 25" x 11"
#279 • Tsudakoma Model 500-CTNC, Machine Indexer Table.
19-3/4" Dia. Indexer Table. Overall: 45" x 24" x 10". Rigging Quote Coming Soon.
#280 • Sharp Model 1764T, Gap Bed Engine Lathe.
17" Swing over Bed, 64" Max Distance Between Centers, Steady Rest, Approx. 2-1/4" Hole Through, 10" Gap, 10" 3-Jaw Chuck, Inch/Metric Threading, 220/440 Volt, 3-Phase, s/n: 91047, Approx. 110" x 36" x 60" Overall. Rigging Info Coming Soon.
#281 • 8-1/2" x 8-1/2" Adjustable Angle Workholding Table.
9" x 12" Mounting Surface.
#282 • Assorted Indexable Drills and Endmills
Includes Inserts and Cart. Dia. From 1/2" Up to 2-1/4". Containers on Bottom Shelf are Empty.
#283 • Large Group of Mostly Double End Carbide Endmills
Approx. 11 lbs
#284 • (14) Solid Carbide Endmills
3" to 5" Lengths, Mostly Around 1" Dia. Approx. 15 lbs
#285 • 50-1/2" x 24" x 3/4" Plate Stock.
Measurement Does Not Include End with Cut-Outs. Rigging Quote Coming Soon.
#286 • Group of Smaller Carbide Endmills
Approx 7 lbs
#287 • Mitutoyo 12-16" Micrometer
With Standards and Case, .001"
#288 • Box of HSS Endmills.
Sizes to 1" Dia.
#289 • Drum Dolly
#290 • Giddings & Lewis Model 48x66 Comb. TbL. Rotary Table.
5100 Lbs. 48" x 66" Worksurface with T-Slotted Table. Contents Not Included. Does Not Appear to Include Turning Handle. Rigging Quote Coming Soon.
#291 • Group of 5C Emergency Collets.
Rack is NOT Included
#292 • Approx. 22 lbs of Solid Carbide of Endmills
#293 • Metal Shelving Unit with Contents
As Shown. Approx. 36" x 12" x 84" Overall.
#294 • Phase 2, 8" 3-Jaw Chuck.
2-1/2" Hole Through. No Back Plate as Shown.
#295 • (2) Large Cap. Vee Blocks.
9-1/2" Distance at Top of Vee. 5" Width of Vee. 15-1/4" x 9" Base.
#296 • (6) R8 Shank Tools.
Including MT#2 Holder, (2) Shell Mill Holders, Endmill Holder, and More.
#297 • (13) C-Clamps.
From 2" Up to 6" Cap.
#298 • (3) Small Parts Cabinets
With Few Assorted Inserts. BTO/UPS:NO
#299 • Starrett No. 124, Solid Rod Inside Micrometer.
#300 • Allstate 5HP Air Compressor
20" Dia. X 60" Receiver Tank, 208/230V. 3 Ph. Overall: 60" x 28" x 52". Rigging Quote Coming Soon.
#301 • Yost Mfg. Co. No. 20, 5" Vise.
(1) Mount is Broke, Approx. 9"×16"×3".
#302 • (9) Solid Carbide Endmills.
(3) 1" x 5-1/2", (6) 1" x 6". Approx. 17 lbs
#303 • Large Quantity of Mainly Cemented Carbide Square Shank Cutting Tools.
Also Includes Tool Steel Cutting Tools. Many Different Types Shown. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#304 • Lista 10-Drawer Cabinet
Approx. 28" x 28" x 39-1/2" Overall. Note: No Key. Galvanized Top is NOT Included. Last Day Removal Only. NO EXCEPTIONS Rigging Info Coming Soon
#305 • Rolling 2-Door Storage Cabinet.
Overall: 32" x 20" x 39-1/2". Contents Inside Included. Contents On Top Not Included.
#306 • Steel Rolling Workbench.
38" x 30" x 32-1/2". With Approx. 5/16" Thick Plate Top. Contents Not Included.
#307 • MagMate Model PNL0800 Magnetic Plate Lifter.
800 Lb. Cap. At 1" Thick.
#308 • Starrett No. 726, 24" to 30" Micrometer
With Wood Case
#309 • Large Assortment of Smaller Carbide Endmills.
Approx. 15 lbs
#310 • Daewoo Puma 8S, CNC Turning Center
Fanuc Series O-T Control, Cutting Diameter Capacity: 14.60", Maximum Swing Over Bed: 19.70", Workpiece Length Capacity: Up to 20.70" with a 22" Distance Between Centers, 12-Position Turret, 8" Hydraulic Chuck, 2.05" Bar Capacity, 4000 Maximum RPM, Tailstock, Chip Conveyor, 220 Volt, 3-Phase, S/N: PM8S0155, Approx. 132" x 80" x 67" Overall Footprint as Shown. Rigging Quote Coming Soon.
#311 • Group of Solid Carbide Endmills.
Approx 10 lbs
#312 • Assorted Solid Carbide Endmills.
See Photos for Unverified Sizes
#313 • Equipto 2-Door Metal Storage Cabinet
Overall: 36" x 14" x 43-1/2".
#314 • Manual Well Pump.
Overall: 30" Length x 24" Height.
#315 • Drill Doctor 750X Drill Sharpener.
With Soft Case.
#316 • Large Assortment of Inspection
Including: Parallel Sets, Micrometer Heads, Standards, and More
#317 • Huge Quantity of Square Shank Insert Type Cutters and More.
Also Includes 4-Sided Tool Post. Cutters 1" Up to 1-1/2" Square Shank. Some for Parts or Repair. Many Appear Kennemetal Brand.
#318 • Universal Tool Pneumatic 3/4" Impact
.
#319 • Large Group of HSS Endmills.
Sizes to 1-1/4" Diameter
#320 • Thermal Dynamics PAK MASTER 150XL, Plasma Cutting Power Source.
Approx. 21" x 35" x 35" Overall. Note: Buyer Will Need to Chase Wires Down and Disconnect them from Plasma Table. See Final Photos for Clarification of Scope of Work. Rigging Quote Coming Soon.
#321 • Kurt D60 6" Machine Vise Swivel Base.
.
#322 • Starrett No. 726, 30" to 36" Micrometer
With Wood Case
#323 • Center Punch Set.
1/2" to 1"
#324 • (40) Assorted CAT-50 Tool Holders.
Includes Endmill and Collet Holders, Shell Mill, Keyless Chuck and More. Storage Rack/Cabinet is NOT Included. NO BTO/UPS
#325 • Hougen Mag Drill.
120V. See Lot 377 for Hougen Drill Tooling.
#326 • 3/4" Plate Top Welding Table with Vise.
96" x 47" Table Top, 4" Benchvise with Swivel Base, (1) Side has Legs Cut Down and Will Need Material Added to Lower Frame. Rigging Quote Coming Soon.
#327 • Assorted Perishable Tooling.
Including Endmills, and Brazed Tipped Square Shank Cutting Tools.
#328 • 2-door Metal Shop Cabinet.
Overall: 30" x 18" x 66".
#329 • Precise 8400FL Filtration Unit
With Metal Storage Box
#330 • Generac 6500XL, Portable Jobsite Generator.
Approx. 54" x 28" x 36" Overall
#331 • Aloris EA, 2-Side Tool Post
For Parts. Missing T-Nut, And Bolt
#332 • Mitutoyo no. 103-223, 8-9" Micrometer
With Case.
#333 • Group of Large Dia Taper Shank Drills and Adapters
Bits to 2-1/2" Diameter, mostly #4 and #5 Taper
#334 • Enerpac 120V. Portable Hydraulic Power Unit.
With (3) lifting Dies. On Rolling cart as Shown.
#335 • Thomas 50 PSIG Air Compressor and Receiver Tank
120V. Overall: 17" x 12" x 9". 50 PSIG Max Pressure. 12 Gallon Portable Air Tank Measures 24" x 12".
#336 • Assorted Mostly Solid Carbide Endmills.
Top Row all Solid Carbide as Shown. Dia. Around Approx. 1" Also Includes K-Tool Insert Type Endmill with Inserts, and HSS Shown in Lower Row.
#337 • Pair of 6" x 6" x 6" Angle Plates
And Pair of 14" x 2" x 3" Shop Made Parallels
#338 • Large Quantity of Mostly HSS Cutters.
Including DoveTail, Keyseat Cutters, Slitting and Slotting Cutters and Assorted HSS and Carbide Ball Endmills Shown. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#339 • Dayton 3 HP, Single Ph. Electric Motor.
230V. 1740 RPM, 1-1/8" Output Shaft.
#340 • Dorian. Model SDN50DA, 2-Sided Tool Post with Holder.
.
#341 • Small Bin of Solid Carbine Scrap Endmills.
18 Lbs. Including Metal Container.
#342 • Group of Solid Carbide Endmills.
Lengths to 6", Mostly Around 1/2" Diameter. Approx. 10 lbs
#343 • (2) 1-1/4" Dia. Indexable Boring Bars.
Both 10" Length.
#344 • (22) Solid Carbide Endmills
Smallest is 1/2" x 3", Largest is 1/2" x 4". Approx. 6 lbs
#345 • Aloris CXA Quick Change Tool Post.
Piston Type, and (1) Dorian Square Shank Holder with Insert Type Cutting Tool.
#346 • Large Group of Sockets.
Including 1/4" 3/8", 1/2" and 3/4" Drive. Sizes Up to 2-1/2".
#347 • Remline Pro 2-Piece Mechanics Tool Box with Contents.
10-Drawer Topper Box. Measures: 26" x 13" x 20" , 7-Drawer Rolling Base Measures: 27" x 17" x 40". See Photos for Contents.
#348 • Metal 2-Door Storage Cabinet.
Overall: 36" x 19" x 86-1/2".
#349 • Kanon 5' Vernier Caliper
With Wood Case
#350 • Metal Mizer Model 2018, Tilt-Frame Vertical Band Saw.
29-1/2" x 28" Table, Coolant, 2 HP, 230/460 Volt, 3-Phase, s/n: MS0689050, Approx. 48" x 68" x 90" Overall, with 91" x 36" x 36" Roller Table. Rigging Quote Coming Soon.
#351 • Equipto Metal Workbench.
Overall: 70" x 27-1/2" x 34" Height to Table Top. Contents Not Included. Built in 120V. Outlets on One Side.
#352 • (2) Mitsubishi Insert Type 1" Square Shank Cutting Tools.
With Inserts and Interchangable Heads.
#353 • Taiwan 1/4" Torque Wrench
20-200 Inch Pounds.
#354 • Assorted Automotive
Including: Creeper, Floor Jack, Jack Stands
#355 • Grinding Wheel Balancer
9" Distance Between Uprights, 8" Rail Length, 12" Distance From Bottom Plate to Rail Height. No Arbors Included.
#356 • Unknown Lathe Steady Rest.
Approx. 11" Distance to Center. See Photos for Dimensions.
#357 • (8) C-Clamps.
From 3" Up to 6".
#358 • Large Quantity of Assorted HSS and More.
Also Includes Center Drills and Countersinks. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#359 • Assorted Hardware.
Including: Assorted Roll Pins, Woodruff Keys, Clevis Pins, Hitch Pin Clips, and More. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#360 • Abrasive Blast Cabinet with Collector.
Approx. 25" x 32" x 30" Cabinet ID, 1/2 HP, 115/230 Volt, 1-Phase, Approx. 34" x 48" x 77" Cabinet, and 21" x 29" x 60" Collector. Rigging Quote Coming Soon.
#361 • Import Pin Gage Set
M-2 Minus, .251 to .500
#362 • 2-Wheel Dolly.
Solid Tires, 14" x 10" Base Pan, 50" Height.
#363 • Assorted Tig/Brazing Rods, Welding Electrodes, and More
.
#364 • (4) Pneumatic Straight Shank Die Grinders.
.
#365 • Unknown Type Dividing Head.
10" 3-Jaw Chuck, 9" Dividing Plate, Adjustable Angle, Overall: 22" x 18" x 16".
#366 • 75 LBS of Solid Carbide Endmills Needing Resharpening.
.
#367 • Federal Pacific 75 KVA 3-Ph. Transformer.
480V. H.V. 208Y/120V. Low Voltage. Cat. NO. 50347M, See I.D. Badge for Additional Specs. 28" x 14-1/2" x 34-1/2" and 495 Lbs. Rigging Quote Coming Soon.
#368 • Large Quantity of Assorted Mainly Adjustable Large Dia. Reamers.
Dia. Up to 4-1/2". Also Includes Interchangable Head Reamers. (Contents Located on 3-Shelves as Shown. No BTO/UPS Availiable.)
#369 • Large Quantity of MT #3 and #4 Drills.
Includes (1) MT#3 to #4 Shank Adaptor. Sizes From 1-1/8" Up to 1-5/8". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#370 • (2) Dorian DA Square Shank Quick Change Tool Holders
(1) D50DA-2, (1) D50DA-1
#371 • (2) Straight Edges.
(1) Brown & Sharpe #528, 6', (1) Unmarked 5'
#372 • (2) Indexable 1" Square Shank Cutting Tools with Inserts
(1) Dorian "Jetstream" Model ADOLNR, (1) Mitsubishi DCLNR-164.
#373 • (2) Bull Nose Live Centers.
(1) 6", (1) 4-1/2". (1) MT#3 with #3 to #4 Adaptor. (1) #4 Taper
#374 • (10) Solid Carbide Endmills
From 1" x 3" to 3/4" x 6" and Approx. 12 lbs
#375 • Metal Shelving Unit with Contents.
Approx. 36" x 24" x 47" Overall
#376 • Stihl FS74 Weed Wacker
With Spool of Wire.
#377 • Large Quantity of Mag Drill/Hougen Cutters.
Also Includes Adaptors and More.
#378 • Import Type R8 Shank Collet Quick Change Holder.
(15) Collets from 1/4" to 1".
#379 • Metal Shelving Unit with Contents.
Shelving Unit Measures: 37" x 12" x 84". Contents Include Vise and Chuck Jaws, Misc. Tooling, and More.
#380 • Linde/Baker Model H30T-03, LP Powered Forklift.
6" x 47" Forks, Cushion Tires, 87" Clear Height, Hour Meter Reads: 01621/3, s/n: 351H12141730. Rigging Quote Coming Soon.
#382 • Acme Electric Corp. 45 KVA 3 Ph. Transformer.
Primary: 480 Delta with Taps, Secondary: 240V. Delta, Overall: 26-1/2" x 21" x 29-1/2".and 380 Lbs. Rigging Quote Coming Soon.
#383 • Large Quantity of Cutting Tool Inserts and More.
Mainly Grooving and Parting Perishables, Also Includes Holder Hardware. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#384 • Massive Group of Assorted Bearings.
See Photos for Makes/Types. Shelving Unit is NOT Included
#385 • (5) Aloris CXA Quick Change Holders.
Including CXA10, CX6, CXA8, CXA6, CXA7.
#386 • Assorted Thread Gages and Tooling.
Including Easy Outs, (2) SPI Acme Screw Pitch Gage, Tap Extractors, and More.
#387 • Assorted Electrical Testing Tools and More.
Includes (2) Weller Solder Tool, Soldering Supplies, AWS Phase Sequence Indicator, and More.
#388 • Nutting Warehouse Cart.
60" x 36" Deck, 19" Distance to Deck Height. Contents Not Included.
#389 • (12) Peterson/Dewitt and De-Sta-Co Vise Grip Type Welding Clamps.
.
#390 • Do-All Model D1024-14, Hydraulic Surface Grinder.
12" Wheel Capacity, 10" x 24" Electromagnetic Chuck, Coolant Tank with Pump, 1.5 HP, 220 Volt, 3-Phase, s/n: 228-67118, Approx. 100" x 72" x 70" Overall. Rigging Quote Coming Soon.
#391 • (8) 12 Oz. Spray Cans of Rust Preventative.
.
#392 • Large Quantity of Allen Wrenches.
Sizes From 1/16" Up to 3/4". Red Organizer Trays Included. Items Shown in Drawer But will be in Box with Red Organizers by Checkout Time.
#393 • Taper Shank Drills
MT#3 Shank , Sizes From 57/64" Up to 1-1/16". Includes MT#3 to #5 Adaptor. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#394 • Assorted Coolant Snap Lock and Pneumatic Fittings and Repair Components.
Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#395 • Large Quantity of Dowel Pins.
From 1/2" - 1-1/2" Up to 1" - 3". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#396 • Large Quantity of Assorted Taps and Dies.
Mostly Appear Standard.
#397 • Large Quantity of Assorted Reamers.
(1) Partial L&I Index with Wood Case. (1) Lawson Products Drill/Reamer Combination Index, Mostly Straight Shank, Some Interchangable Head Shank. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#398 • Assorted Lathe Perishable Tooling and More.
Including Large Quantity of Mainly Sandvik Inserts Including Threading Inserts, Several Square Shank Insert Type Cutting Tools, HSS Counter Sinks, and More. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#399 • Iscar A08-FLER2, 8" x 1/2" Dia. Boring Bar with Inserts.
.
#400 • Dainichi Model DLG-L-8 Removable Gap Bed Engine Lathe.
Swing Over Bed: 18"/24", Distance Between Centers Approx. 60", Through Hole Approx. 1-9/16", Max. RPM: 2400, Taper Attachment, #4 Taper Tailstock, 10" 3-Jaw Chuck, inch/Metric Threading, Steady Rest, Removable Chip Pan (Rear), 3-Phase, s/n: 4830, Approx. 107" x 42" x 55" Overall. Rigging Quote Coming Soon.
#401 • Group of Solid Carbide Endmills.
Approx. 10 lbs
#402 • 8" Speed Vise.
Vise Body Missing a Piece, Approx. 11"×20"×4-1/2".
#403 • Dillon 50,000 Lb. Cap. Dynamometer.
200 Lb. Divisions
#404 • (2) Material Stands.
(1) Pair of Pipe/Stock Rolling Set Up, (1) Pair of Round Stock Holders.
#405 • Assorted Cutting Tool Inserts.
Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#406 • Assorted MT Shank Drills and Extended Length Straight Shank.
MT Drills Mostly Under 1/2" Cap. Also Includes MT Adaptors. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#407 • Assorted Abrasives.
Including Roloc Discs, Norton Quick Change Round Discs, and More. PVC Items in Top Left Not Included. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#408 • Assorted MT #2 and # 3 Taper Shank HSS Drills.
Dia. From 33/64" Up to 7/8". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#409 • Group of Solid Carbide Endmills.
Dia. From Approx. 1/4" Up to 1". 18 Lbs.
#410 • Morrison Model K, Keyseater.
1-1/4" Capacity, s/n: K813775, 230 Volt, 3-Phase, Approx. 33" x 48" x 54" Overall. Rigging Quote Coming Soon.
#411 • Equipto 2-Door Metal Cabinet
Overall: 36" x 18" x 78". Contents Not Included.
#412 • Kurt D60, 6" Machine Vise on Custom Angled Fixture Plate.
.
#413 • Large Group of Assorted Inserts and More.
.
#414 • Assorted Portable Hydraulic Pump Components.
Brands Include Enerpac, Lion, and More. Unknown Conditions.
#415 • Aloris 2-Sided Quick Change CXA Size Tool Post.
Includes Dorian D35CXA-1, Square Shank Quick Change Holder with Indexable Square Shank Cutting Tool.
#416 • Assorted Steel Letter and Number Stamps and Holders.
.
#417 • Dewalt Model DW364, 7-1/4" 120V. SAW.
With Case.
#418 • Large Quantity of Cutting Tool Inserts.
Many Different Types as Shown. Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#419 • Shop-Vac.
Overall: 22" x 26" x 26". 120V.
#420 • Rigging Tree with Large Quantity of Rigging.
Including: Chains, Slings, Sheet Lifters, Dual Branch Chains, Quad Branch Chains, and 1-1/2 Ton Cap. 2" Cap. Plate Lifter, and More.
#421 • Large Quantity of Cutting Tool Hardware, Inserts, and More.
Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#422 • Large MT Adaptors.
Sizes Up to MT6 to MT7.
#423 • 6" Machine Vise Swivel Base
1" Dia. Center Stud.
#424 • Lapmaster, Model 10, Lapping Machine.
10" Lapping Plate with Spare 10" Plate. Overall 23" x 16" x 10". Unknown Working Condition. See All Photos.
#425 • Columbian 4-1/2" Benchvise.
With Swivel Base.
#426 • Large Quantity of Kennametal and More Square Shank Insert Type Cutting Tools.
1", Up to 1-1/2" Square Shank Holders.
#427 • Dozens of Assorted Milling Cutters.
Dia. Up to 5".
#428 • Assorted Mostly 1" Drive Impact Sockets.
Sizes Up to 4-1/8". Includes 1" to 1-1/2" Adaptor for Larger Dia. Sockets.
#429 • 115V. Right Angle Roller Chain Drive Motor.
With Forward/Reverse Drum Switch. 60/1 Ratio Gear Drive Motor.
#430 • LeBlond Dual Drive Engine Lathe.
10" 4-Jaw Chuck, Approx. 15" Swing Over Bed, Approx. 50" Between Centers, Lantern Style Tool Post w/ Lantern Style Tooling, Tailstock, Steady Rest, Speeds: 28-1800 RPM, Approx. 1-1/2" Thru Hole, 220 Volt, 3-Phase S/N: HC1800. Approx. 104"×38"×53". Rigging Quote Coming Soon.
#431 • 8" Machine Vise
With Handle
#432 • Large Group of Machine Extension Cords and Misc. Hydraulic Lines.
Mostly 3-Ph. Cords.
#433 • Solar No. 480, 6/12 Volt Battery Charger/Booster.
Overall: 12" x 12" x 28". Not Including Additional Welded Handle.
#434 • Square D, Cat. NO. 75T3H, 75KVA Transformer.
H.V. 480V. 90 Amps L.V. 208Y/120, 208 Amps, Overall: 30-1/2" x 20" x 30". 504 Lbs. Rigging Quote Coming Soon.
#435 • Meda Indexer
8" 3-Jaw Chuck with 2-1/4" Hole Through. Vertical and Horizontal Mount. 6" to Center. Includes 2-1/8" Riser Block. Indexer and Riser Only. No other Contents Included.
#436 • (23) HSS Endmills
Dia. From 13/16" Up to 1-1/8". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#437 • Large Quantity of Aluminum Stock Drops and Cantilever Stock Rack.
Includes Round, Rectangle and Square Stock, Plate Stock and More. Shelving Unit Measures: 61" x 24" x 48".
#438 • 120V. Hydraulic Power Unit with Lathe Tracing Attachment.
20" x 10" x 9-1/2" Hydraulic Reservoir. Hydraulic Lines Cracked and Likely Need Replacement. Rigging Quote Coming Soon.
#439 • BT 50 Taper Tool Presetter.
Overall: 24" x 12" x 5-1/2". Rigging Quote Coming Soon.
#440 • ITE "Mighty Max" H-Frame Hydraulic Press.
5" Ram Diameter with 30" Diameter Ram Plate, 46-1/4" Between Uprights, With Enerpac Hydraulic Power Supply, 115 Volt, s/n: 1492, Approx. 80" x 64" x 90" Overall. Rigging Quote Coming Soon.
#441 • Kurt D675, 6" Machine Vise
With Handle
#442 • Kurt D675, 6" Machine Vise
With Handle
#443 • Large Quantity of MT Shank Drills.
From MT#3 Up to #4, Dia. From 3/4" Up to 1-27/64". Some Straight Shank. Top Shelf Only. Items Shown in Rack But will be in Unsorted Box by Checkout Time.
#444 • (23) Morse Taper Shank Large Diameter Drills.
MT Shank #4 and #5, Lower Shelf Only. Dia. From 1-15/32" Up to 1-47/64". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#445. • (6) CXA Size Quick Change Holders
Aloris Types:Including CXA1, CXA8, CXA7, and CXA20, Dorian Types: CXA1, CXA881.
#446 • (37) Large Dia. MT Shank Drills.
Dia. From 1-7/8" Up to 3-1/2". Contents of (2) Shelves. Not Availiable for BTO/Shipping. Local Pick Up Only.
#447 • Cincinnati Indexer.
Approx. 1" Hole Through. No Handle and Chuck Removed. Thread on Chuck Mount. 9" Indexer Plate.
#448 • Assorted Sockets 1/2 Breaker Bars and Ratchets.
.
#449 • Large Quantity of Assorted Reamers.
Including Huot 1/16" to 1/2" x 64ths Indes with Reamers, MT and Straight Shank, and Interchangable Head, Sizes From .4990 Up to 2-1/4" Interchangable Head.
#450 • Bridgeport EZ-Trak SX, CNC Vertical Milling Machine.
9" x 48" T-Slotted Table, R8 Spindle, Kurt Power Draw Bar, 4" Column Riser, 2 HP, 480 Volt, 3-Phase, s/n: ???, Approx. 72" x 78" x 92" Overall. Note: Indexer, Tailstock, Collets, Tooling are NOT Included. Rigging Info Coming Soon
#451 • Dapra Grade 3 Metric Gage Block Set
With Wood Case, 1,0005 to 100
#452 • 1/2" Steel Banding Cart
With Banding, Clips and Tools. Overall: 25" x 18" x 40".
#453 • 1/2" Poly Banding Cart with Tools.
Overall: 24" x 18" x 34".
#454 • Assorted Tooling.
Including 2-1/4" Vise, (2) 0-1/2" Cap. Drill Chucks, and More.
#455 • Tailstock Fixture.
8-1/4" Height to Center. With Carbide Tipped Center. 2" Center Travel.
#456 • (10) R8 Collets.
Dia. From 3/16" Up to 3/4".
#457 • (3) Kant Twist Clamps.
(2) 4-1/2D, (1) 6D.
#458 • Nutting Warehouse Cart
60" x 36" and 19-1/2" Height to Deck.
#459 • Assorted Welding Electrodes.
.
#460 • Mobile Spray Welding Station
With CastoDyn DS8000 Spray Welding Tool, Assorted Powders, Rolling Cabinet. Approx. 32" x 38" x 54" Overall. Note: Gas Bottles NOT Included Rigging Quote Coming Soon.
#461 • Mitutoyo Depth Micrometer
#462 • Group of Assorted Stock Material
Threaded rod, Round Tube, Solid Square and Round.
#463 • Box of HSS Endmills.
Sizes up to 1-1/8"
#464 • Assorted Stock Material
Including: Aluminum Hollow Round, Threaded Rod and More
#465 • Phase II 12" Vertical/Horizontal Rotary Table.
Approx. 20"×17"×5".
#466 • Lista 9-Drawer Cabinet
Approx. 28" x 28" x 39-1/2" Overall. Note: No Key. Galvanized Top is NOT Included. Last Day Removal Only. NO EXCEPTIONS. Rigging Quote Coming Soon.
#467 • (21) R8 Collets.
Sizes From 1/16" Up to 7/8".
#468 • Kurt 6" Machine Vise Parallel Seperator.
.
#469 • Assorted Tooling.
Including Sandvik L8M 3" Shell Mill, Indexable 1-1/2" Dia. Cutter with Inserts on 3/4" Shank, and Small Jacobs Drill Chuck on 3/8" Straight Shank.
#470 • Hydraulic H-Frame Press.
Set up for Crushing Paint Cans. 31" Between Uprights, 3" Ram Diameter, Approx. 12" Stroke, 3-Phase, Approx. 44" x 22" x 105" Overall. Rigging Quote Coming Soon.
#471 • (4) R8 Shank Tools.
(1) 1-19/32" Reamer, (1) Shell Mill Holder with Iscar Indexable 3" Shell Mill, (1) Auto Drill Chuck, and (1) Slitting Saw Holder.
#472 • (2) Pneumatic Impact Hammers and Chisel Tips.
.
#473 • (7) Bank Locker Unit.
Each Locker Measures 15" x 18" x 78". Bolted Together in Set of 4, and Set of 3.
#474 • (8) Assorted Micrometers
Including Starrett no. 436, 4-5". Lufkin 4-5", Mitutoyo 0-1". Fowler 3-4"
#475 • (30) Solid Carbide Endmills.
Dia. From 1/2" Up to 1" Dia.
#476 • Equipto Metal Workbench.
With Drawers and Door. And Peg Board Back. Overall without Pegboard: 70" x 26" x 34". Contents Not Included
#477 • Century Store Drill Bit Display/Index Cabinet.
Overall:20" x 14-1/2" x 15". Includes Drills Shown.
#478 • Handjak55, 5500 Lb. Cap Pallet Jack.
48" x 7" Forks, 13" Distance Between Forks.
#479 • (2) 1/2" Pneumatic Impacts.
(1) Ingersoll Rand, (1) CP.
#480 • Teclock Dial Bore Gauge.
.0005" Grad. Anvils from 2" Up to 4".
#481 • Jacobs 18N Drill Chuck.
1/8" to 3/4" Cap. On MT#4 Taper Shank with #4 to #5 Taper
#482 • Large Group of Assorted Inspection
As Shown
#483 • Starrett No. 123,26" Vernier Caliper.
With Case.
#484 • Troyke Model R-15 Rotary Table.
Approx. 20"×20"×5-1/2". Lot number has been changed. Rigging Quote Coming Soon.
#485 • Eutectic Rototec Spray Weld Kit
#486 • J&L PC-14 Optical Comparator.
14" Screen, 18" x 6" Table, 1-Phase, Approx. 30" x 40" x 72" Overall. Rigging Quote Coming Soon.
#487 • Vintage Lift Mechanism.
Approx. 34" x 36" x 40"
#488 • (4) Aloris EA Quick Change Holders
(2) EA2, (2) EA1.
#489 • (2) Pieces of Stock Material
(1) 6" x 6" x 94-1/2" Square Stock, (1) 7" Dia. X 1-1/4" Wall Thickness Stock at 118" Length.
#490 • Carboloy Heavy Duty Double End Grinder.
12" Wheel Diameter, 22" x 10" Tilting Tables, 3-Phase, Approx. 48" x 32" x 56" Overall. Rigging Quote Coming Soon.
#491 • Warehouse Cart
60" x 30" Cart , 14" Height to Deck. Contents Not Included.
#492 • Set of (4) Machinery Dollies.
6" Swivel Tops. Each Measures: 14" x 6", Approx. 6" Height to Rubber Top Pad.
#493 • Kool Mist Pneumatic Coolant Sprayer.
8" x 3-1/2" x 8" Reservoir, Magnetic Nozzle Holder.
#494 • (2) Vee Blocks.
5" Distance to Top of Vee. 5" Width. Each Mounted to Fixture Block. 6-1/2" Dustance From Bottom of Plate to Top of Vee. Fixture Plate Measures: 10" x 6-1/2". Aluminum Plate Stock Behind Not Included.
#495 • Starrett No. 224, 9-12" Micrometer
With Case
#496 • Mitutoyo CMM for Parts.
60" x 50-1/2" x 10" Granite Surface Plate, Mitutoyo 3-Axis Readout, Approx. 53" x 60" x 94" Overall. Note: Probe Head will Need to be Removed to Clear Door Frame. Rigging Quote Coming Soon.
#497 • (2) Rows of Assorted Stock Steel.
Including 3" 1045F CF Bar Solid Roundstock Bar at Approx. 20', Thick Wall Tubing at 5-1/2" and 6-1/2" Dia. And Top Shelf of Mostly Flatstock and Rectangular Barstock. From 1-1/2" X 5/8" Up to 3" x 1-1/2".
#498 • Airco Model 3A/DDR 224HPA/B/S-D
Rated Output (AC): 40 Volts, 300 Amps @ 60% Duty Cycle, 80 Max OCV. (DC) 30 Volts, 300 Amps @ 60% Duty Cycle, 80 Max OCV, Input: 208/230/460 Volt, 1-Phase, 23.9 KVA, s/n: U490934, Approx. 22" x 36" x 48" Overall. Rigging Quote Coming Soon.
#499 • 6" Machine Vise
With Swivel Plate. No Handle. Lot number has been changed
#500 • Ralmikes No. 121-415 Portable Hardness Tester.
.
#501 • Metal Shelf with Contents as Shown.
Approx. 36" x 12" x 84" Overall.
#502 • 6" Machine Vise.
Approx. 9"×12"×3".
#503 • Large Group of Small Solid Carbide Endmills.
Approx. 3 lbs
#504 • Assorted Insert Type Tooling.
.
#505 • Equipto Metal Workbench.
Overall: 70" x 27-1/2" x 34" Height to Table Top. Contents Not Included.
#506 • Approx. (75) TG100/DF10 Collets.
With Rack, 1/8" to 1".
#507 • Large Quantity of Assorted Endmills.
Including Carbide and HSS, Ball, Flat, Double End and More. Dia. From 11/64" Up to 3/4". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#508 • (3) Aloris DA Quick Change Holders.
DA6, DA41, DA55
#509 • Metal Cabinet with Contents of Lathe Tooling
Approx. 53" x 32" x 47".
#510 • Snap-On GA-185, X4 Torque Multiplier with Torque Meter
Model 2005-TL, 1" to 1-1/2" Drive. Meter From 0-2000 Foot Pounds.
#511 • Equipto Metal Workbench.
140" Length, x 28" x 34" Height. Vise and Contents Not Included.
#512 • (2) Double Flaring Tool Kits.
.
#513 • (6) Indexable Boring Bars.
From 1" Dia. Up to 1-1/2" Dia.
#514 • (4) soldering tools, and (1) heat tool.
.
#515 • Dorian CA Size 2-Sided Quick Change Tool Post with Holders.
4-Quick Change Holders Including 1-3/4" Dia. BORING bar Holder, (2) Square Shank Holders, and Cut-Off Holder.
#516 • Cleco Model WP-2060, Pneumatic 3/4" Impact.
.
#517 • Group of Mostly Aluminum Stock.
Solid Rectangle and Round, lengths to 107"
#518 • Assorted Oilers and greasing tool
.
#519 • Assorted Steel Stock
2" x 2" x 34" Solid Square, 5-1/2" x 3/4" x 33" Solid Rectangle, and More
#520 • Piranha Model PII-140 Hydraulic Ironworker.
Tonnage: 140 (1-3/8" thru 1-1/4"), Strokes per Minute: 24 @ 1" Stroke, Throat: 20.5", Angle Capacity: 6" x 6" x 5/8", Open Height: 14", Closed Height: 7-3/4", Stroke Length: 5", Punch Platen: 16" x 36", Plate Shear: 20-1/2" long, 1" x 14", 3/4" x 18", 1/2" x 20", Round Bar Shear: 1/2" - 2", Coper Notcher: 4" x 6" x 3/8", Hydraulic Tank Capacity: 40-Gallons, Main motor: 20 H.P., s/n: 017, approx. 48" x 120" x 90" Overall. Rigging Quote Coming Soon.
#521 • (27) CAT 50 Holders with Storage Rack.
Cart Measures 28" x 16" x 62". BTO/UPS:NO
#522 • Steel Rolling Table.
48" x 20-1/2" x 31" Overall
#523 • Box of HSS Endmills.
Sizes up to 7/8" Diameter
#524 • (3) Pneumatic Sanders.
(2) CP Dual Piston 16" x 2" Sanders, (1) Orbital Jitterbug Sander, and (1) 6" Dia. Sander.
#525 • Ingersoll Rand Model 2100G, 1/2" Drive Impact.
.
#526 • Assorted Solid Carbide Drills and Endmills.
Dia Up to 1".
#527 • Group of Solid Carbide Endmills.
Approx. 7 lbs
#528 • Assorted Solid Carbide Endmills
Approx. 9 lbs
#529 • Assorted HSS andCarbide Perishable Tooling.
Including Endmills, Assorted Inserts, Drills, and More.
#530 • Blake Co-Axial Tramming Indicator.
.0005" Grad.
#531 • Adjustable Angle Material Positioner.
40-1/2" x 7" Original Table w/ 60" x 9". Fixture Top Mounted to Original Table.
#532 • Large Group of Assorted Hold Down Hardware.
(3) Organizers and More.
#533 • (2) Dorian QITP50-3 Quick Change Holders
#534 • Aloris DA, 2-Side Tool Post.
#535 • Equipto Metal Workbench with Columbian D45, 5-1/2" Benchvise.
Overall: 70" x 27-1/2" x 34" Height to Table Top. Vise with Swivel Base. And Built In Pipe Jaws, No Other Contents Included. Built in 120V. Outlets Not Included.
#536 • Puller Set.
.
#537 • (4) Interchangable Head Indexable Boring Bars.
(12) Heads as Shown. Some Missing Hardware. All Boring Bars 1-1/2" Dia.
#538 • (3) Dorian DA Size Quick Change Tool Holders.
QITP50-1, QITP50-3, QITP50-41
#539 • Group of Insert Type Tooling for Large Lathes.
Boring Bars to 2-1/2" x 14" and Square Shanks to 1-1/2". BTO/UPS:NO
#540.1 • LeBlond Makino Model FNC-128/A30 CNC Vertical Machining Center.
Table: 70"x31", X-Travel: 49.2", Y-Travel: 31.5", Z-Travel: 27.5", Spindle: CAT-50 Taper, 30 Pocket ATC, Spindle Speed: up to 3500 RPM, Fanuc 11M CNC Control, Chip Conveyor, 220 Volt, 3-Phase, Includes GE Cat. No. 9T23B3874 400V to 200V Transformer, S/N: 1M3-012. Machine Foot Print Approx. 192"×130"×152". NOTE: Aluminum Fixture Plate is NOT Included. Rigging Quote Coming Soon.
#540 • (2) Albrecht Keyless Drill Chucks.
1/32" to 1/2" Cap.
#541 • Contents of Shelving Unit
Including: Electric Motors, Large Dia Wire and More. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#542 • Group of Electrical Wire.
Largest is 2" Dia. Jacket. Located on Mezzanine. Buyer Responsible for Safe Removal. (Tossing Items from Mezzanine is not going to fly)
#543 • 3Ph. Extension Cord
.
#544 • (3) Dorian DA Size Quick Change Holder.
(2) QITP50-1, (1) QITP50-3
#545 • Kwik-Way Model FL Portable Boring Bar.
3/4 HP, 115/230 Volt, 1-Phase, Approx. 18" x 9" x 43" Overall
#546 • (2) Rows of Stock Steel Material
Including Aluminum Rectangle Stock, Threaded, Roundstock, Hex Stock And More.
#547 • Hardinge Model 6-3D, 6" 3-Jaw Chuck.
1-3/4" Hole Through. Thread On Type.
#548 • (Large Quantity of Brazed Tipped Boring Bars.
Left Set 5/8" Shank, Center 3/4" Shank, Right 3/8" Shank.
#549 • Import Type 5C Collet Holder.
Vertical and Horizontal Mount.
#550 • Ooya RE3-1600A Radial Arm Drill Press.
16" Column, 48" Head Travel on Arm,(16) Speeds from 20-2180 RPM, #5MT Spindle, 2-Side Box Table, 7.5 KW, 220/440 Volt, 3-Phase. s/n: 72 9568, Approx. 96" x 40" x 120" Overall. Rigging Quote Coming Soon.
#551 • (3) #5 Taper Lathe Tools.
(1) Jacobs 18N 1/8" to 3/4" Cap. Drill Chuck on MT #4 Shank with #4 to #5 Arbor., (1) Appears 1-1/4" Endmill Holder, and (1) Live Center.
#552 • Contents of (1) Level of Stock Rack
Including Solid and Tube Round Steel, Solid Rectangle. Round Tube to 4-1/2" x 1/2" x Approx. 14'
#553 • Contents of (1) Level of Stock Rack.
Including: 6-1/4" Dia. x Approx. 19' Solid Round, Marked 4140HT,
#554 • (37) CAT 50 Holders with Wood Storage Rack.
Rack Measures: 48" x 31" x 45". BTO/UPS:NO
#555 • (5) CXA Size Quick Change Cutting Tool Holders.
Aloris: (2) CXA4, CXA2, CXA41, and Dorian CXA1.
#556 • Assorted HSS Endmills
From 4-1/4" x 3/4" to 5-1/4" x 1-1/4"
#557 • (16) Solid Carbide Endmills.
From 1" x 3-7/8" to 1" x 6" and Approx 28 lbs
#558 • 2-Wheel Hand Truck
#559 • Large Group of Steel Stock.
Solid and Hollow Round, Lengths to Approx. 17', 1-1/2" to 8" Diameters
#560 • Ridgid 300 Powered Pipe Threader
Cart Mounted with Built-In Cutting Oil Reservoir, 115 Volt, Approx. 32" x 39" x 44" Overall. Rigging Quote Coming Soon.
#561 • Large Tool Post Grinder.
1 HP, 230/460 Volt, 3-Phase
#562 • (12) Pieces of Rectangle Stock.
4-1/2" x 1-1/4", (6) at 103-1/2", (6) at 128-1/4".
#563 • Contents of (3) Levels of Stock Rack.
Solid Round Steel to 2" Dia. x 17' L, Solid Square to 2" x 3/8" x 12' L
#564 • Group of Solid Carbide Endmills.
Approx. 14 lbs
#565 • Contents of Shelving Unit
Mostly Work in Process.
#566 • (30) Solid Carbide Endmills.
Mostly Around 2-1/2" L x Approx 3/8" Dia. And Approx. 5 lbs
#567 • 3/8" Drive Crows Feet Wrenches.
3/8" Up to 1".
#568 • Assorted 1" Square Shank Insert Type Cutting Tools.
.
#569 • Pair of 9" x 6-3/4" x 5-7/8" Angle Plates.
.
#570.1 • Fortune Model 1640 Gap Bed Engine Lathe.
8" 3-Jaw Chuck, 10" Removable Gap, Approx. 16" Swing Over Bed Approx. 22" Swing in Gap, Bed Length: 56", Tailstock, Spindle Speeds: 30-1800 RPM, Foot Treadle, Acu-Rite TurnMate 2-Axis DRO, 220 Volt, 3-Phase, S/N: 565869. Approx. 80"×37"×63". Note: Tool Post is NOT Included. Rigging Quote Coming Soon.
#570 • Large 2-Piece Metal Equipto Work Bench.
Overall 140" x 28" x 34". Contents Not Included.
#571 • Pair of Machine Vee Blocks.
Overall 5-1/4" x 6" x 6-1/4" Height. Slotted Base for T-Slot Table.
#572 • 10" x 17" Angle Plate.
1" Thick, 10" x 11" Base. Drilled and Tapped Surfaces.
#573 • Tapmatic Model R7 Auto Tapping Attachment on R8 Shank.
Includes Wrenches and Spare Flex Collet. #10-3/4" Cap.
#574 • Equipto Metal Workbench.
Overall: 70" x 27-1/2" x 34" Height to Table Top. Vise and Contents Not Included. Built in 120V. Outlets on Both Sides
#575 • GM Diesel Power Factory Engineered Parts Clock.
Missing Glass, Unknown Working Condition.
#576 • Sheet Cart with Assorted Material.
(1) Sheet 4' x 9-1/2' Tyvar 1000, (1) 108" x 60-1/2" x 1/2" Aluminum Sheet, (2) 10' x 60-1/2" x 16 ga. Steel Sheets and More
#577 • (8) Pieces of Stock Steel
Solid Roundstock From 3" x 32-1/2" Up to 10" x 45-1/2". Includes (1) Piece on Floor on Right Side.
#578 • Assorted Stock Material on Floor
(13) Pieces Total. Including Solid Stock From 2-1/2" x 54" Up to 5" x 88", and More.
#579 • Huot 50 Taper Cart
With Lots of CAT 50 Holders BTO/UPS:NO
#580 • Bridgeport Vertical Milling Machine.
9" x 42" T-Slotted Table, R8 Spindle, Variable Speeds from 60-4200 RPM, Chromed Ways, Bridgeport Shaping Attachment, 1.5 HP, 230/460 Volt, 3-Phase, s/n:132081, Approx. 60" x 80" x 84" Overall. Rigging Quote Coming Soon.
#581 • Steel Rolling 3/4" Hold Down Organizer Cart.
With Large Quantity of 3/4" Hold Downs. Overall: 37-1/2" x 32" x 38".
#582 • Delta 6" Bench Grinder.
1/4 HP, 120 Volt.
#583 • Group of Miscellaneous Air Line, Power Cord, Jumper Cables and More
#584 • Metal Shelving Unit
With Contents as Shown. Shelf Measures 37" x 12" x 84"
#585 • (2) Keyless Drill Chucks.
(1) Albrecht 0-3/8" Cap. On #3 Taper Shank. (1) Jacobs 1-13MM Cap. On 1/2" Straight Shank.
#586 • (14) Solid Carbide Endmills
Lengths to 6", mostly Around 5/8" Diam. And Approx. 9 lbs
#587 • Equipto 50 Taper Storage Cart
With Lots of CAT 50 Holders. Approx. 27" x 26" x 38". BTO/UPS:NO
#588 • Assorted Steel Angle Iron.
Up to 4" Angle x 57-1/2" Length.
#589 • Contents of (1) Level of Stock Rack
Diameters from 7/8" to 6-1/2", Lengths to 17'.
#590 • Miller XMT 304 CC, DC Inverter Arc Welder.
Rated Output: 32 Volts, 300 Amps @ 60% Duty Cycle, 95 Max OCV. Input: 230/460 Volt, 1/3 Phase, s/n: KK171138, Cart Mounted with Stick Holders, , Ground Clamp, Power Cord, Approx. 27" x 34" 52" Overall.
#591 • Metal Frame Workbench
Overall: 72" x 24" x 39". Contents Not Included.
#592 • (3) Pipe Wrenches
(2) 24", (1) 18".
#593 • Enco adjustable Boring Head on R8 Shank.
3/4" Tool Holes.
#594 • Huge Quantity of Helicoil Thread Repair Kits and Components.
Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#595 • Dozens of HSS Reduced Shank Drills
From 33/64" Up to 53/64". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#596 • 10" Dia. X 45" Piece of Solid Round Stock.
Rigging Quote Coming Soon.
#597 • Large Group of Smaller Solid Carbide Endmills.
Approx. 4 lbs
#598 • Shop Made Cantilever Type Material Rack.
Approx. 85" x 39" x 96". Contents NOT Included.
#599 • Pair of 8' x 5" Fork Extensions.
4" Between Side Walls. 2-1/2" x 4" Opening
#600 • Nissan CYGMO2L30S Electric Forklift
3450 lbs Rated Capacity, 189" Max Lift Height, Tilt/Sideshift, 6' Fork Extensions, Cushion Tires, 85-1/2" Clear Height, Ferro Five FR18HK1000 36-Volt Battery Charger, 208/240/480 Volt, 3-Phase. Rigging Quote Coming Soon.
#601 • Assorted Insert Type Cutting Tools.
Mostly 1" Square Shank but Boring Bars Included as Well as New Iscar SGTBU 20-6G, Cut-Off Holder.
#602 • (4) Sledge Hammers.
(1) Matco Model DBS12, Deadblow Sledge,
#603 • Equipto Metal Workbench with Benchvise, Storage Drawers and Cabinet.
Columbian D44, 4" Benchvise with Swivel Base. Contents Not Included. Overall: 70" x 27-1/2" x 34" Not Including Peg Board Backing.
#604 • Swivel Plate for 6" Machine Vise.
Approx. 13"×12"×2".
#605 • (2) #4 Taper Tailstock Tools.
(1) #3 MT Live Center with #3 to #4 Adaptor. (1) Jacobs 14N, 0-1/2" Cap Drill Chuck.
#606 • (3) Drill Containers with Drills.
(1) Fractional, (1) Number Drill.
#607 • Assorted Taps and Tap Handle.
Sizes Up to 3/4-14 NPT.
#608 • 8" 3-Jaw Chuck
L? Taper Back Plate. 2" Hole Through. Fits Lot 430 Leblond Lathe.
#609 • Kent Moore Unknown Automotive Alignment Components
With Case.
#610 • Clausing Series 16VT1, Variable Speed Drill Press.
Speeds From 330 RPM to 2640 RPM, 7-1/2" Throat, 4-1/2" Quill Travel. Mt#2 Taper Receiver with Jacobs 34 Drill Chuck. 0-1/2" Cap. 17" x 12" Worktable with Coolant Trough. Foot Pedal Control, Adjustable Height Table. Overall: 22" x 30" x 71". 230V. Rigging Quote Coming Soon.
#611 • Kurt D60, 6" Machine Vise.
No Handle.
#612 • Metal Shelving Unit with Assorted Power Tools and More.
Shelving Unit Measures: 37" x 12" x 84".
#613 • Assorted Reduced Shank Drills.
Dia. From 27/32" Up to 1-1/16". Items Shown in Drawer But will be in Unsorted Box by Checkout Time.
#614 • Assorted Inspection.
(3) Jack Stands, (3) Indicators, and More.
#615 • Adjustable Angle Dividing Head with (3) Plates and Tailstock.
4" to Center.
#616 • Equipto Metal Workbench.
Overall: 70" x 27-1/2" x 34" Height to Benchtop. Contents Not Included.
#617 • (2) Partial Wrench Sets.
.
#618 • MHC Dial Bore Gage.
.0005" Grad. 1.4" to 2.4" Anvils.
#619 • Assorted Hand Tools
Including (3) Bondhus, standard Allen Wrench Sets, Transfer Punches, (2) Pneumatic Die Grinders, and More.
#620 • Bosch 18V. Cordless 1/2" Drill Driver.
.with (2) Batteries and Charger
#621 • Dewalt Model DCD790, 1/2" Cordless 20V. Drill Driver
(2) 5AH Batteries, (2) Chargers and Carry Bag with Perishables.
#622 • Assorted Lifting Clevises and EyeBolts.
.
#623 • 60" x 30" Warehouse Cart
14" Height to Deck. Contents Not Included.
#624 • 2-Wheel Dolly.
Solid Tires
#625 • Kurt Model D688 6" AngLock Precision Machine Vise.
Approx. 9"×17"×5".
#626 • Heavy Duty Angle Plate with T-Slotted Face.
Approx. 42"×25"×38-1/2". Rigging Quote Coming Soon.
#627 • Union/Satterlee Decimal Equivalent Metal Sign.
Overall: 16" x 22".
#628 • Assorted Big Kaiser Tooling
Includes (2) CAT-50 Holders, Assorted Extensions and Boring Heads, Rack is NOT Included. Not Available for BTO. Lot number has been changed
#629 • 3" Tilting Drill Press Vise
#630 • Heinrich 8SV, 8" Speed Vise.
Overall: 11" x 21".
#631 • Kurt II, 8" Machine Vise
With Handle
#632 • Small Metal Workbench with Contents
Overall: 36" x 26-1/2" x 34-1/4".
#633 • Huot 50 Taper Tool Cart
With CAT 50 Holders as Shown. BTO/UPS:NO
#634 • 6" Machine Vise and Swivel Base.
.
#635 • (2) Metal Shelving Units
With Contents as Shown
#636 • 3" Dia. Optical Flat.
.000001
#637 • 30-Position 5C Collet Storage Tray.
Overall: 12" x 9" x 6".
#638 • Complete Set of Deluxe Hilman Rollers Machinery Skates.
Including (2) Handles, and (4) Machine Dollies.
#639 • Carbide Tipped cutting tool.
(1) Lifetime 10", 80T. With 5/8" Arbor, (1) 8" Dado cutting tool set.
#640 • Matsuura Model MC-1500H Mold Master CNC Horizontal Machining Center.
Fanuc System 6M Control, Table: 63"×26", X-Travel: 62", X-Travel: 40", Z-Travel: 39", 30-Pocket ATC, BT-45 Spindle, 220 Volt, 3-Phase, S/N: 82052754. Approx. 126"×160"×128". Note: Aluminum Angle Plate is NOT Included. Rigging Quote Coming Soon.
#641 • Steel Work Bench.
Approx 72" x 36" x 34". Contents NOT Included.
#642 • Command CAT 50 Quick Change Tap Holder with Holders.
.
#643 • Adjustable Angle Height Tailstock.
9" Max Height to Center. Includes #2 Taper Live Center. Tailstock Measures: 5" x 8-1/2" x 13". 12" x 9" Fixture Base.
#644 • (21) TG100/DF10 Collets.
.
#645 • Parallel Set.
.
#646 • Williams Metal Decimal Equivalents Sign.
Overall: 17" x 25".
#647 • Wood Lathe Tooling Cabinet with Contents of Lathe Tooling
Overall: 36" x 9-1/4" x 33-1/2". Contents Including Lathe Dead Centers, Assorted HSS Perishable Tooling, Dead Centers, Cemented Carbide Square Shank Cutters, Dumore Tool Post Grinder Stones, Boring Bars, Lantern Style Cutting Tools. And More.
#648 • Equipto Metal Workbench.
Overall: 70" x 27-1/2" x 34" Height to Table Top. Contents Not Included. Built in 120V. Outlets on Both Sides
#649 • Dayton 5HP 3-Ph. Electric Motor.
1760 RPM, 208-230/460V.
#650 • LeBlond 25" Heavy Duty Engine Lathe.
45" 4-Jaw Chuck, Approx. 3-1/8" Thru Hole, Taper Attachment, Steady Rest, 28" 3-Jaw Chuck, Approx. 170" Long Bed, Spindle Speeds: 6 to 625, RPM, Newall DP700 2-Axis DRO, 220 Volt, 3-Phase, S/N: NI1371, Approx. 245"×85"×68". Note: Tool Post is NOT Included. See Lot #665 for Tool Post. Click on "Documents" Tab for Machine Manual. Rigging Quote Coming Soon.
#651 • Metal 2-Door Shop Foremans Desk with Contents.
Contents Include PPE and More. Overall: 34-1/2" x 30" x 52".
#652 • Albrecht Keyless Drill Chuck.
1/32" to 1/2" Cap. On R8 Shank.
#653 • Assorted Lathe Tooling.
Including Indexable Square Shank and Boring Bars and More.
#654 • (2) Pittsburgh Large Adjustable Wrenches.
450MM and 600 MM. (Approx. 12" and 24")
#655 • Assorted HSS, and Brazed Tipped Square Shank Cutting Tools.
.
#656 • Starrett Inspection
Including 0-1" .001" Grad. Micrometer, and (2) Starrett No. 128 Micrometer Heads. And (3) Calipers.
#657 • SWI, Trav-A-Dial.
.001" Grad. With Mounting Bracket.
#658 • Large Quantity of Cutting Tool Inserts in Small Parts Organizer.
See Photos for Quantity and Type. Organizer Measures:19-3/4" x 6-1/2" x 16".
#659 • Assorted Parallels.
.
#660 • Pair of Magnetic Transfer Parallels.
12" x 1-1/2" x 3".
#661 • (4) Indicators and (2) Holders.
Indicators Include: (1) Federal D5M, .0005" Grad. (1) Ames No. 211, .0001" Grad, (1) Starrett: .125" Range, .0005" Grad., and (1)Baker .0001" Grad.
#662 • Group of Solid Carbide Endmills.
Lengths to 6" And Diameters to 1". Approx. 23 Lbs
#663 • Large Group Lot
Including Steel Rolling Table with Tool Presetter, vise, miscellaneous Tooling. Table Measures 68" x 30" x 47"
#664 • Floor Mount Jib Crane.
Approx. 9" Column Diameter, 144" Under Beam, 11-1/2' Arm Length, Budgit 1-ton Hoist. Rigging Quote Coming Soon.
#665 • Aloris EA, 2-Side Tool Post
With (2) Aloris EA-4 Quick Change Boring Bar Holders. Used on Lot #650
#667 • 2-Door Metal Cabinet
With Contents. Approx. 61" x 32" x 55" Overall. Rigging Quote Coming Soon.
#668 • 6-Position Lathe Turret.
1-1/2" Tool Holes. See Photos for Important Measurements
#669 • Narex VHU2-1/8" Adjustable Boring Head.
2" Straight Shank, 1" Tool Hole, Accesories, Wood Case.
#670 • Samsung Machine Tool Model SL-35/1500 CNC Turning Center.
Fanuc Series Oi-TD Control, Maximum Speed: 2,000 RPM, 15" 3-Jaw Chuck, Bar Capacity: 4.6", Maximum Turning Diameter: 16.5", Maximum Swing: 23.60", Maximum Machining Length: 60.2", 10-Station Turret, Tailstock, Chip Conveyor, 30 HP, 220 Volt, 3-Phase, S/N: 14K730242. Approx. 186" x 75" x 88" (Main Machine Dimensions) and Approx. 22,000 lbs. (Live Center in Tailstock Not Included.) Rigging Quote Coming Soon.
#671 • 61"×25"×3-1/2" Cast T-Slotted Fixture Plate.
Rigging Quote Coming Soon.
#672 • Assorted Inspection.
Including Radius Gage Sets, 30CM Aerospace Dial Caliper. .02MM Range, and More.
#673 • Group of Hand and Power Tools
As Shown
#674 • (5) CAT 50 Holders.
#675 • 24"×24"×38" Tombstone with 28"×28" Base.
Approx. 1,850 lbs. Rigging Quote Coming Soon.
#676 • Metal Shelving Unit
With Contents as Shown
#677 • Diagraph Stencil Cutting Machine
Located on Mezzanine.
#678 • Dorian SD35CXA Double Sided Tool Post with Holders.
(1) D35CXA-1, (1) D35CXA-2.
#679 • Group of Lifting Straps
#680 • Heavy Steel Cart with Contents
Approx. 35" x 24" x 33" Overall
#681 • Shop Made Forklift Boom
60" L Swiveling Boom Arm, 6" x 1-3/4" Fork Pockets
#682 • Heavy Steel Cart
Approx. 36" x 20-1/2" x 36". Contents NOT Included
#683 • Duff Lynx 1 Ton 120V. Chain Hoist
With CM Series 632 Trolley.
#684 • (2) 2" New 5C E-Collets and More.
.
#685 • (11) Command No. XTC3 Tap Collets.
-0812 to -1375. Lot number has been changed
#686 • Large Quantity of Cutting Tool Inserts,
And Hold Down Fingers and Screws.
#687 • (3) Command No. C6T4-0001 CAT-50 Tap Holders.
Includes (8) Tap Collets. Lot number has been changed
#688 • Tsudakoma TRNC-301 Rotary Table
12" Diameter T-Slotted Table with 8" 3-Jaw Chuck, Approx 38" x 38" x 20" Overall. BTO/UPS NO Lot number has been changed
#689 • (2) #4 Taper Tools.
(1) Bruckner Live Center, (1) Keyless Drill Chuck, 1/8" to 5/8" Cap.
#690 • Shop Made Stand
With Assorted Lifting Straps, Shackles
#691 • Huge Quantity of Assorted Tooling.
Including Endmills, Drills, Taps, and More. Mostly HSS but Many Carbide Endmills Included.
#692 • 2-Tier Metal Shop Cart with Contents.
Contents Mostly Stock Drops, and Misc. Cart Measures: 30" x 15" x 32".
#693 • Gast Vacuum Pump with Vacuum Fixture Plate.
8" x 8" Table.
#694 • Kitagawa Model HS-06, 6-3/4" Hydraulic CNC Chuck.
.
#695 • Assorted Mainly Insert Type Cutting Tools.
.
#696 • Budgit 500 Lb. Cap. 120V. Chain Hoist
Pendant Control, Chain Basket. With CM 1/2 Ton Cap. Trolley. 120V.
#697 • Group of Lifting Straps
#698 • 15" 3-Jaw Chuck.
Approx. 5-3/4" Thru Hole, No Mfg Markings, No Mounting Plate, Chuck Body 5-3/4" Wide. Lot number has been changed. Rigging Quote Coming Soon.
#699 • Kitagawa Model BT-8, 8-1/4" 2-Jaw Hydraulic CNC Chuck.
.
#700 • Mizoguchi Cat 50 Right Angle Milling Attachment.
Works with TG100/DF10 Collets.
