Crow Wing Cabinets, Inc. Online Only Auction

Crow Wing Cabinets, Inc. Online Only Auction

Bidding starts July 14 at 6:00am CT

Bidding ends Tuesday, July 21st at 10:00 am CT

17753 MN-371, Brainerd, MN 56401

NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.

All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification.

It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building.

Associated Fees:

Buyers Premium: 15%

Sales Tax:0% (Due to Casual Sale Rule)

Loading Fees: Mandatory on items with posted loading fees

Card Convenience Fee: 4%

Payment can be made onsite by Cash, Credit, Wire, Check (Checks from new bidders will NOT be accepted without a bank letter of guarantee). Wire Transfer instructions/Tax Exemption form will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Wire: Add $15 for Transfer Fee. 

Auction Preview:

Monday, July 20th from 9:00 am to 3:00 pm

Auction Checkout: (Closing times are sharp)

Wednesday, July 22nd from 9:00 am to 4:00 pm 

Thursday, July 23rd from 9:00 am to 4:00 pm (Items with Posted Load Fees)

Payment and removal is due by 4:00 pm on July 23rd. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Items remaining beyond 4:00 pm of July 23rd will be considered abandoned regardless of payment status. If you have several items/time consuming items to pick up, DO NOT wait until the end of the day to show up. You will be charged an upfront fee of $150/Hour to keep the building open and staffed.

Rigging:

Under no circumstances will buyers be permitted to operate powered equipment onsite, whether purchased or brought here. TK Rigging will be onsite for loadout. Larger items will display a loading fee. This fee is mandatory and non-negotiable and will be added to your auction invoice. This fee covers a basic "pick up and set down" of the machine as displayed in the auction, onto buyer provided transport. It does NOT cover any disassembly/lay down/palletization/strapping/tarping of the item. If needed, you will be charged for additional services. TK Rigging is available for hire for any items without a posted load fee. Please contact Blake (TK Rigging) @ 612-720-1243 or blake@tkrigging.com to schedule your loadout, and for all other rigging related questions. Buyers/Hired transport must provided their own cribbing/dunnage/straps/chains/tarps for transport.

There will be absolutely no scrap disassembly allowed anywhere on this property. This includes cutting with saw/torch, dragging/tossing of items, filling of dumpsters/roll-offs.

Shipping:

Available for "Hand Carry" Type Items Only. There will be a fee of $20 per lot to haul "BTO/UPS" items back to our warehouse for shipping or pickup from our Blaine, MN warehouse.

Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up.

UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300.

The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in an irrevocable permanent ban from all future auctions. Please reach out to the contact below with any questions or for clarification of terms. 

Auctioneer: Jim Nelson

(612) 991-7008

jim@premiermachineryauctions.com

License no. MN 62-26-06

#.1 - READ IN FULL BEFORE BIDDING!

All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification. It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building. Auction Location: Crow Wing Cabinets, Inc. 17753 MN-371 Brainerd, MN 56401 Associated Fees: Buyers Premium: 15% Sales Tax:0% (Due to Casual Sale Rule) Loading Fees: Mandatory on items with posted loading fees Card Convenience Fee: 4% Payment can be made onsite by Cash, Credit, Wire, Check (Checks from new bidders will NOT be accepted without a bank letter of guarantee). Wire Transfer instructions/Tax Exemption form will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Wire: Add $15 for Transfer Fee. Auction Preview: Monday, July 20th from 9:00 am to 3:00 pm Auction Closing: Tuesday, July 21st Beginning at 10:00 am CST Auction Checkout: (Closing times are sharp) Wednesday, July 22nd from 9:00 am to 4:00 pm Thursday, July 23rd from 9:00 am to 4:00 pm (Items with Posted Load Fees) Payment and removal is due by 4:00 pm on July 23rd. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Items remaining beyond 4:00 pm of July 23rd will be considered abandoned regardless of payment status. If you have several items/time consuming items to pick up, DO NOT wait until the end of the day to show up. You will be charged an upfront fee of $150/Hour to keep the building open and staffed. Rigging: Under no circumstances will buyers be permitted to operate powered equipment onsite, whether purchased or brought here. TK Rigging will be onsite for loadout. Larger items will display a loading fee. This fee is mandatory and non-negotiable and will be added to your auction invoice. This fee covers a basic "pick up and set down" of the machine as displayed in the auction, onto buyer provided transport. It does NOT cover any disassembly/lay down/palletization/strapping/tarping of the item. If needed, you will be charged for additional services. TK Rigging is available for hire for any items without a posted load fee. Please contact Blake (TK Rigging) @ 612-720-1243 or blake@tkrigging.com to schedule your loadout, and for all other rigging related questions. Buyers/Hired transport must provided their own cribbing/dunnage/straps/chains/tarps for transport. There will be absolutely no scrap disassembly allowed anywhere on this property. This includes cutting with saw/torch, dragging/tossing of items, filling of dumpsters/roll-offs. Shipping: Available for "Hand Carry" Type Items Only. There will be a fee of $20 per lot to haul "BTO/UPS" items back to our warehouse for shipping or pickup from our Blaine, MN warehouse. Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up. UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300. The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in an irrevocable permanent ban from all future auctions. Please reach out to the contact below with any questions or for clarification of terms. Auctioneer: Jim Nelson (612) 991-7008 jim@premiermachineryauctions.com License no. MN 62-26-06

#1 - Jet Model JWBS-140S Woodworking Bandsaw.

Adjustable Angle Table: 15"×15", Table Tilt: 10° Left - 45° Right, cutting tool Speed: 3,000 RPM, Cutting Capacity Width: 13-1/2", Cutting Capacity Height: 6", cutting tool Length: 93-1/2", cutting tool Widths: 1/8" to 3/4",115 Volt, Approx. 17"×32:×68" and 172 lbs.

#2 - (2) L.A. Weaver Crown Rail And Panel Fixtures.

Part # 310 and 330, Approx. 22"×7"×5" and 19"×5"×4".

#3 - Eagle Mfg. Co. Model YPI-3010 40 Gallon Capacity Flammable Paint/Ink Storage Cabinet.

Contents Not Included. Cabinet has Door Closers, No Key, Approx. 43"×18"×45".

#4 - (8) Pipe Clamps.

1" Diameter Pipe, Lengths From Approx. 30" to 36".

#5 - Chicago Power Tools Model DP-515 Drill Press.

1/2" Chuck, 5-Belted Speeds: 400 to 2,800 RPM, 12" Diameter Tilting Table with 32"×14" Wood Fixture Plate, Bolted to Wood Cabinet, 115 Volt, Overall Approx. 32"×21"×68".

#6 - Hyper Tough Model 0100313A Air Compressor.

Max. PSI: 100,Tank Approx. 7"×18", 120 Volt, Includes Air Hose, Approx. 18"×7"×13".

#7 - (3) Ridgid 18 Volt Hand Tools with (2) Chargers and (4) 18 Volt Batteries.

(1) Model R86240 Oscillating Multi Tool, (1) Model R86034 Impact Driver and (1) Model R84084 AM/FM/MP3 Player.

#8 - Large Group of Mostly Pipe Clamps.

Lengths from 36" to 10'

#9 - DeWalt Model DW745 10" Compact Job Site Table Saw.

Table: 22"×19", Max. Cut Depth at 45°: 2.25", Max. Cut Depth at 90°: 3.125", Max. Table Tilt - Left: 45°, Max. Table Tilt - Right: 0°, Rip Capacity - Left: 12", Rip Capacity - Right: 16",115 Volt, Approx. 25"×24"×16" and 45 lbs.

#10 - Grizzly Shaper with Model G4176 Stock Feeder.

Model Unknown, Work Area of Table Approx. 19"Dx28"L, Table is 34"H, 3 HP, Shaper is 220 Volt, Single Phase, Feeder is 115 Volt, S/N: 933975, Overall Approx. 28"×30-1/2"×58".

#11 - Pneumatic Hose Reel

With Hose. Mounted approx. 7' H on Wall. Buyer Responsible for Removal

#12 - (2) Power Hand Tools.

(1) Bosch Model 1587AVS Variable Speed Jigsaw and (1) Ridgid Model R2850 Series B JobMax Oscillating Multi Tool.

#13 - Abrasive Blast Pot.

No Mfg. or Model Available, Tank Approx. 10"×14".

#14 - Assorted Channel, Edging and More.

Lengths to Roughly 8'

#15 - Ridgid Model JP06100 Jointer.

Planing Width: 6-1/8", Max. Depth of Cut: 1/8"/Pass, 46" Long Table, On Ridgid Stand,115 Volt, Approx. 46"×21"×38".

#17 - (4) Pneumatic Hand Tools - (2) Senco SKS Finish Nailers and (2) 5" Random Orbit Hand Sanders.

.

#18 - Powermate 1/2" Drive Impact with (8) Sockets.

Sockets are 3/8" to 7/8".

#19 - MTD Model 31AE6FHG705 Ranch King 28" 2-Stage Snowblower with Electric Start.

Self-Propelled, Tecumseh 8 HP Engine, Head Light, S/N: 1l145B30380, Approx. 28"×53"×45".

#20 - Castle Inc. Model TSM-22 Pocket Cutting Machine.

Pneumatic Clamp, Foot Pedal Control, Machine Uses a 6° Low-Angle Pocket, 115 Volt, S/N: 67143, Approx. 32"×32"×47" and 200 lbs.

#21 - Shop Made Wood Cart.

Approx. 97"×31"×30". Last Day Removal Only.

#22 - Craftsman Multi Level Workshop.

Open Dimensions Approx. 21"×34"×29", Closed Dimensions Approx. 21"×16"×29".

#23 - Assorted Prefinshed Birch Ply Sheet Stock

Including: (4) Sheets 3/4"×48"×96", (1) Sheet 1/2"×48"×96" and Assorted 1/4", 1/2" and 3/4" Drops.

#25 - DeWalt Model DW705 12" Compound Miter Saw.

115 Volt, Approx. 24"×24"×18". Saw is Screwed to Bench. Buyer to Remove.

#26 - Speedaire Model 5Z658C 3-IN-1 Refrigerated Air Dryer.

SCFM: 56, R22 Refrigerant, 115 Volt, Approx. 30"×20"×27".

#27 - Northern Industrial No. NTE 131-S 40 ft 12AWG Cord Reel and (2) Extension Cords.

Extension Cords are AWG12, Approx. 100 ft and 25 ft.

#28 - Craftsman Jigsaw and Skilsaw Circular Saw.

Craftsman Model 330.27245 LED Laser Jigsaw and Skilsaw No. 5150 7-2/4" Circular Saw.

#29 - Assorted Shop Tools and More.

Includes Black & Decker Bullseye Laser Level, Stud-Metal-AC Wire Sensor, FastCap System, Levels, LED Light Tripod (Missing (1) Wing Light) and (2) Collapsible Sawhorses.

#30 - Her-Saf Model 144 Vertical Panel Router.

Vertical Capacity: 48", Horizontal Capacity: Unlimited, Max. Material Thickness: 2", Back Fence Area: 120"x48", Router Type: Counter Weighted, Electronic Variable Speed: 10,000 - 21,000 RPM, Pneumatic Clamping, Foot Pedal Control, 115 Volt, S/N: 2796, Approx. 122"×40"×90" and 800 lbs.

#31 - Group of Import Wood Sheet Stock

(12) 3/4"x4' x 8' Import Birch Ply Sheets and Assorted Drops.

#32 - Section of Industrial Shelving.

Approx. 72"×17"×96". Contents Not included.

#33 - Bosch 1604 Router with an Additional Base.

.

#35 - Ritter Mfg. Co. Cabinet Door and Frame Clamping Table.

Table Approx. 71"×35", (3) Pneumatic Clamps, Foot Pedal Control, Approx. 79"×28"×56". Contents on Shelf Not Included.

#36 - Makita Model LS1016L DXT 10" Double Bevel Sliding Compound Miter Saw.

Automatic Guard Retraction Needs Repair,115 Volt, Approx. 25"×30"×20".

#37 - (4) Senco Pneumatic Nailers/Staplers.

#38 - Assorted Hand Tools Including Nut Driver, Screwdrivers and More

.

#39 - Assorted Clamps as Shown.

.

#40 - Ritter Mfg. Co. Model R-113 13- Spindle, Manual, Single Row, Line Boring Machine.

Spindles on a 32mm Center to Center Spacing, Throat: 8", Max. Material Thickness: 1.25", Max. Drilling Depth: 1.5", Table Size Approx. 48"×20", 115 Volt, S/N: 1723, Approx. 60"×30"x72".

#41 - (4) Sheet Lifting Suction handles.

(2) Bessey PS55, (2)HoD Fast Cap

#42 - (10) Assorted Makita Drills, (6) Makita Chargers and (5) Batteries.

See Photos for Model Numbers, Condition Unknown of All Items.

#44 - (4) Plastic Toolboxes with Contents of Hole Saws, Dtills and Assorted Fasteners.

Boxes are Approx. 18"×11"×14". Boxes Have Damage.

#45 - Graco Triton 1:1 150 Paint Sprayer

#46 - (7) Assorted Clamps.

(2) Visegrip 11SP.

#47 - (20) 2-1/2" Pony 3-Way Edge Clamps.

#48 - DeWalt Model DW718 12" Double Bevel Sliding Compound Miter Saw.

Cutting Capacities: Crosscut at 90°: 8" Width x 5.6" Height, Miter 45°: 8" Width x 3.3" Height, Bevel 45°: Left - 2.2" Width x 2.3" Height, Right - 1.9" Width x 1.9" Height, Compound Cuts: 31.62° Miter x 33.85° Bevel Resulting Height: 6.6", Miter Range: 0°-50° Left, 0°-60° Right, Bevel Range: 0°-48° Left and Right, 115 Volt, Approx. 32"×16"×17".

#50 - Cehisa Model Pro 7 Automatic Single Sided Edgebander.

3 mm Strip Capacity, Quick Melt Glue Unit with Digital Temperature Display, 2-Roller Pressure Station, Single Motor End Trim Unit with Double cutting tool, Includes Edgeband Material as Shown, 220 Volt, 3-Phase, S/N: 500, Approx. 90"×39"×51". Click 2nd Photo for Video.

#51 - (16) Shaper Cutters.

Mostly Approx. 4" Diameter,1-1/4" and 3/4" Bores.

#52 - Senco Model PC1010N Oil-Free Air Compressor.

0.7 scfm @ 90 PSI, 135 Max. PSI, 1 Gallon, 0.5 HP, 115 Volt, Approx. 14"×11"×11".

#53 - Milwaukee Cat. No. 5392-1 3/8" Hammer Drill.

Includes Metal Storage Case and Assorted Fasteners and Drills. Case is Approx. 13"×10"×6".

#54 - Lot of Mostly White Oak MDF Core Sheets.

(10) 3/4"×48"×96" Plain Sliced White Oak MDF Core. (2) 3/4"x48"×96" Rift White Oak MDF Core and Assorted Drops.

#55 - Jefferson Electric Cat. No. 423-3217-055 Dry Type General Purpose Transformer.

High Voltage: 480 Delta, Low Voltage: 240/120 CT., KVA: 45, Approx. 22"×16"×29".

#56 - (2) Shop Made Wood Tables on Casters.

Approx. 48"×30-1/2"×30-1/2", Top is 3/4" Thick.

#57 - (2) Ridgid 18 Volt Drills, Battery Charger and (3) Batteries.

(1) Model 860052 1/2" Variable Speed Drill and (2) Model 86008 1/2" Variable Speed Drill.

#59 - Hi-Lift HL-484 Jack.

4660 lb Max Capacity, 48" Max Lift Height.

#60 - Powermatic Model 27 Shaper with Grizzly Model G4179 Stock Feeder.

Work Area of Table Approx. 22"Dx28"L, Table is 34"H, Shaper is 220 Volt, 3-Phase, Feeder is 220 Volt, Single Phase, S/N: 9627578, Overall Approx. 28"×30-1/2"×62".

#62 - 6" Indexable Shaper Cutter Head with Assorted Profile cutting tools.

1-1/4" Bore. Cutter is PN:128AHD, Max. RPM: 8000, also Includes Assorted Spacers.

#65 - Tool Dock Rolling Router Cabinet.

With 1/2" Router, 115 Volt, Approx. 30"×28"×37".

#66 - Assorted Countertop Brackets of Varying Wood Types.

Also Includes Assorted Wood Boards.

#67 - Group of Hard Rock Maple Melamine

(3) 1/4"×60"×96" Full Sheets and Drops.

#68 - Bosch Model zcS10 7-1/4" Circular Saw and Bosch Model 1587AVS Jigsaw.

.

#70 - Eagle Paint Booth with Fire Suppression System.

Approx. 26ft x 14.5ft x 11ft, 2-Doors are Approx.5ft x 8ft Each. Seller will Disconnect the Ducting, Electrical and Fire Suppression System. Contents Not included. There will be a fully refundable deposit of $1000 added to your invoice. This fee will be held as a guarantee of removal by the buyer. This deposit will be refunded by mailed check at the time of complete removal. Buyer Responsible for Disassembly and Removal NO LATER THAN AUGUST 7th. If removal is NOT completed by August 7th, Buyer forfeits their rights to the removal deposit, amount paid at auction, and this item itself. Buyer Must Submit a Certificate of Liability Insurance Prior to Removal.

#71 - Plastic Toolbox with Contents as Shown.

Toolbox is Approx.19"x20"×14".

#72 - Assorted Drill Bits, Spade Drill Bits, Hole Saws and More.

In (2) Plastic Storage Cases.

#73 - Bosch Model 1617EVS Router.

Also Includes Kreg K4 Pocket Hole Jig as Shown.

#74 - (2) Makita 12 Volt Cordless Drills with Batteries and (5) Chargers.

(1) Model DA312D 3/8" Right Angle, (1) Model 8413D 3/8" Drill. Also Includes (1) Makita ML-9000 Battery.

#75 - Whirlwind Model 1000 Heavy Duty Pneumatic Up-Cut Chop Saw with 10' TigerStop Auto-Feeder and Printer.

cutting tool Diameter: 14" x 1" Bore, Cutting Capacity: 2-3/16"x8-1/4" (1" x 10") Average: up to 2-3/16"x8-1/4" Max. Foot Pedal Control, 230 Volts, 3-Phase, S/N: S4580S45L, Saw Approx. 32"×26"×44", Bench with TigerStop Approx. 144"×34"×58" and Approx. 650 lbs. Click on 2nd Photo for Video.

#76 - (15) Pipe Clamps.

Mostly 36" L.

#77 - Group of Wood Sheet Stock for Making Storage Rack, See Lot 158 for Completed Rack.

Including: Particle, MDF. 4' x 1-1/8" x 109" (Largest MDF)

#78 - Large Assortment of Edging/Trim Material

#79 - (4) Porter Cable Routers.

#80 - Air Sentry Dust Collector.

220 Volt, 3-Phase, (1) Unit Approx. 52"×52"×210" and (1) Unit Approx. 97"×63"×170". These Dimensions are Approx. Assembled Dimensions. There will be a fully refundable deposit of $1000 added to your invoice. This fee will be held as a guarantee of removal by the buyer. This deposit will be refunded by mailed check at the time of complete removal. Buyer Responsible for Disassembly and Removal NO LATER THAN AUGUST 7th. If removal is NOT completed by August 7th, Buyer forfeits their rights to the removal deposit, amount paid at auction, and this item itself. Buyer Must Submit a Certificate of Liability Insurance Prior to Removal.

#81 - Freud Model JS102 V6 4" Joiner and Porter-Cable Model 75372 Router with Model 75371 Base.

Router Base Does Not Have Correct Base Plate.

#82 - Ryobi Model TS-260 II 10" Compound Miter Saw with Abrasive Cutoff cutting tool.

Bevel Range: 0°-45°,115 Volt, Approx.19"×22"×14".

#83 - (2) Tools

(1) Senco 23LXP Finish Nailer, Craftsman Corded Drill

#85 - Mitsubishi Model FBCW5K, Electric Forklift.

36-Volt System, Capacity: 4,450 lbs, Max. Height: 188", 4"×42" Forks, Tilt and Side Shift, Mast Height: 83", Includes Crown Battery Mfg. Co. Model CR18FR3B-1000 Battery Charger, Charger is 220 Volt, 3-Phase, Approx. 22"×22"×26", Forklift is Approx. 41"×127"×87". Click on 2nd Photo for Video

#86 - (2) Senco Pneumatic Finish Nailers.

(1) Model FinishPro 25XP, 18 ga., 5/8" to 2-1/8", Shank: .039" with Case and (1) Model SLP2018 ga., 5/8" to 1-5/8", with Case.

#87 - Grizzly Cabinet Table Saw. NO MOTOR.

Table Approx. 36"×27", Includes Fence, Approx. 50"×36"×34".

#88 - DeWalt Model DWST08250 Tough System 450 Rolling Toolbox with Assorted Hand Tools.

Includes Pliers, Hammers, Screwdrivers, Stud Finders and More. Toolbox Approx. 21"x18"×16".

#90 - Whirlwind Model 1000 Heavy Duty Pneumatic Up-Cut Chop Saw with 10' TigerStop Auto-Feeder.

Foot Pedal Control, 240 Volt, 3-Phase, Saw Approx. 32"×26"×44", Bench with TigerStop Approx. 144"×34"×58". Note: Wood and Router Table Shown are Not Included. Click on 2nd Photo for Video.

#91 - (3) Levels Including Stanley No. 42-347 48" Wood Level with Case.

Also Includes Stabila Type 187 32" and Masterforce 72".

#92 - (2) DeWalt Cordless Drills, (3) Batteries and (2) Chargers.

(1) Model DC980 12 Volt Heavy Duty XRP 1/2" Drill with (2) Batteries, (2) Model DW988 18 Volt Heavy Duty XRP 1/2" Drill/Driver/Hammer Drill.

#94 - Assorted Power Tools

Including: DeWalt DW100 Drill, Makita 7-1/4" Circular Saw

#95 - Northtech Industrial Machinery NT-24-10HCVS 24" Heavy Duty Single Surface Wood Planer with Helical Head.

Helical 24" Head with 6-Row Carbide Inserts, Feed Speed Range: 5-70 FPM, 10 HP Main Motor, 230 Volt, 3-Phase, S/N: 040276. Approx. 37"×44"×57" and Approx.1200 lbs.

#97 - Assorted Sheet stock

Including: MDF, Particle, Plywood. Lengths to approx. 8'. Storage Rack Included. Approx. 36"×48"×112".

#100 - Bütfering Model SG0 311 RRK 3-Head Wide Belt Sander.

43" Wide Belts, Head 1: Profiled Steel Contact Roller - 160 mm Diameter (6.3"), 20 HP Motor, Head 2: Profiled Rubberized 85° Shore Contact Roller - 160 mm (6.3" ), 20 HP Motor, Head 3: Profiled Rubberized 65° Shore Contact Roller - 160 mm (6.3"), 15 HP Motor, 230 Volt, 3-Phase, S/N: 0411491654. Seller States that Unit Does Not Aways Track Properly. Approx. 69"×70"×78" and 3,000 lbs. Catch Table can be Left Behind if Not Wanted. No Ducting Included. Click 2nd Photo for Video.

#101 - Approx.(20) Assorted 1/4" Shank Router Bits.

.

#102 - (10) Pipe Clamps.

1" Diameter Pipe, Lengths From Approx. 30" to 36".

#103 - Eagle Mfg. Co. Model YPI-4510 60 Gallon Capacity Flammable Paint/Ink Storage Cabinet.

Cabinet has Door Closers, No Key, Approx. 43"×19"×65-1/2".

#104 - Coleman Model VF0200310 Powermate Handyman Air Compressor.

2 Hp, 2.5 Gallon, On Cart, 115 Volt, Approx. 24"×10"×21". Note: Tank has been Repaired.

#105 - DeWalt Model DW708 12" Sliding Compound Miter Saw Mounted on a Makita WST01 Large Rising Miter Saw Stand.

12" Carbide Tipped cutting tool, 115 Volt, Closed Dimensions Approx. 55"×30"×32".

#106 - Shop Made Wood Layout Table with Contents.

Approx. 97"×61"×35", Top is 3/4" Thick. Last Day Removal Only.

#107 - (10) 5 lb. Boxes of Dickson 2-1/2" Galvanized Roofing Nails with Washer.

.

#108 - Craftsman Model 315.27480 Router and (2) Porter-Cable Router Bases.

Router is Missing Plastic Base Plate, Router Bases are Models 75361 and 1001-T2.

#109 - Bosch Model RA1181 Router Table with Kreg Beaded Face-Frame System.

Router Table: 27"×18", Includes Manuals.

#110 - Fillon Technologies MX150 Paint/Stain Mixing Station.

s/n: 1000037974, Approx. 61" x 18" x 29". This Lot Includes: Scale, Timer, Shelving Unit, Can Lids.

#111 - (2) Routers.

Bosch 1617, Makita 3612C

#112 - Group of Mostly Pipe Clamps.

Length from 32" to 110".

#113 - 2-Wheel Hand Truck.

Solid Tires

#114 - Werner T376-4C, Lift Master Aluminum Ladder.

6' Ladder Height, 8' Side Rail Length

#115 - Marcon International Machinery M7500, Hinge Boring Machine.

3/4 HP, 208-230/115 Volt, 1-Phase, Approx. 30" x 30" x 26" Overall

#116 - (2) Air Sanders, (1) Corded Sander

With Large Amount of 5" Abrasive Discs

#118 - Shop Made Downdraft Table.

Approx 72" x 36" x 36" Overall. Contents NOT Included. Table Only. No Motor/Collection System Included.

#120 - Speedaire Model 1WD76 Reciprocating Air Compressor.

Tank Approx. 24"×60",15 HP, 230 Volt, 3-Phase, S/N: R0005060. Approx. 76"×24"×54".

#121 - Grizzly Double Bag Type Dust Collector.

Model Unknown, 3 HP, 220 Volt, Single Phase, No Support Hangers for Upper Bags. Approx. 57"×40"×41".

#123 - Keller Pro 10' Fiberglass Ladder

#124 - Bosch Jigsaw and Makita Belt Sander.

(1) Bosch Model 1587AVS Jigsaw and (1) Makita Model 9920 3"×24" Belt Sander with Bosch Labeled Dust Bag.

#125 - Grizzly Model G1140 6"X80" Edge Sander.

Table Approx. 48"×12", 1-1/2 HP, 110/220 Volt, Single Phase, Overall Approx. 48"×24"×50".

#126 - (2) Bosch Power Tools

SDS Jigsaw, 1618 Router

#127 - Black & Decker 3104 Reciprocating Saw

With Case

#130 - Powermatic Model DT-65 Single End Dovetailer.

With Pneumatic Clamps, Cutter Height Range: 3/16" to 3/4", Max. Front Thickness: 2-3/8", Max. Side Thickness: 1-3/16", Min. Front Thickness: 9/32", Min. Side Thickness: 3/8", Min. Dovetail Height: 3//16", 220 Volt, Single Phase, S/N: 0509DT65113, Approx. 36"×26"×56" and 510 lbs.

#131 - Craftsman Model 919.154030 Reciprocating Air Compressor.

7.5 SCFM at 40 PSI, 5.6 SCFM at 90 PSI, Tank Approx.12"×24",115 Volt, Shroud is Damaged and Not Attached, Handle is Missing Bolts. Approx. 30"×18"×27".

#132 - Assorted Hand Tools and (4) Irwin Quick Clamps.

Plastic Toolbox is Approx. 19"×10"×14".

#133 - (1) Section of Industrial Shelving.

Approx. 76" x 17" x 86" Overall. Contents NOT Included. Last Day Removal Only

#134 - Group of Saw cutting tool.

6" to 12" Dia.

#135 - (2) Graco Merkur ES Paint Sprayers with Air Motors PN: 24G693 Type J19A and paint sprayers.

Includes (2) Graco G15 paint sprayers and Regulators. Click 2nd Photo for Video.

#136 - Powermatic Model 66-TA 10" Tilting Arbor Table Saw.

Overall Approx. Footprint is 102"×96" and Table Height of 34", Buyer Responsible For Disassembly Prior to Loading, Includes a Powermatic Accu-Fence, Main Table Approx. 28"x38", Arbor Diameter: 5/8", Diameter of cutting tool: 10", Max. Depth of Cut at 90°: 3-1/8", Max. Depth of Cut at 45°: 2-1/8", Speed: 4,000 RPM, 3 HP, 220 Volt, 3-Phase, S/N: 04050661290.

#137 - Group of 5" Abrasive Discs

#138 - DeWalt Model DW745 10" Compact Job Site Table Saw.

Table: 22"×19", Max. Cut Depth at 45°: 2.25", Max. Cut Depth at 90°: 3.125", Max. Table Tilt - Left: 45°, Max. Table Tilt - Right: 0°, Rip Capacity - Left: 12", Rip Capacity - Right: 16",115 Volt, Approx. 25"×24"×16" and 45 lbs. Note: Missing (1) Foot Pad.

#139 - (5) Boxes 3M 9211+ N95 Masks.

#140 - Powermatic Model 27-Shaper S/T with Reliable Cutting Tools Copecrafter10-1 with Pneumatic Clamping.

Work Area of Table Approx. 22"Dx28"L, Table is 34"H, 5 HP, 220 Volt, 3-Phase, S/N: 0311027279, Overall Approx. 28"×30"×45".

#141 - Group of Assorted Wood Panels, Doors, and More

#143 - Johnson GreenBrite Portable Leveling Laser

With Tripod.

#144 - Chicago Electric 7" Polisher and Hot adhesive tool

#145 - Delta Cat. No. 43-355 Wood Shaper.

Overall Table Approx. 31-1/2"×27" Includes Table Extension, 115/230 Volt, Single Phase, Approx. 31-1/2"x27"×42".

#146 - Porter-Cable Model 7529 Variable Speed Plunge Router.

Speed: 10,000–23,000 RPM, 115 Volt.

#147 - Senco No. TN11G1 Never Lube Oil Free Pin Nailer.

23 ga. Headless Pins, 1/2"-1-3/8", Shank: .025", In Plastic Storage Case.

#148 - Masterforce Socket Set with Assorted 1/4" and 3/8" Drive Sockets.

Also Includes Assorted Wrenches.

#149 - (2) Senco Pneumatic Finish Nailers.

(1) Model FinishPro 33Mg, 16 ga., 1-1/4" to 2-1/2", Shank: .060" with Case and (1) Model SLP20XP, 18 ga., 5/8" to 1-5/8", with Case.

#150 - Striebig Model 5CONOM 11A Type 5192EA Optisaw 1 Plus Panel Saw.

cutting tool Diameter: 10", Max. Cutting Length Approx.15ft, Max. Vertical Cutting Height Approx. 86.6", Max. Horizontal Cutting Height Approx. 82.6", Max. Cutting Depth: 2-3/8", 220 Volt, 3-Phase, S/N: 25837, Approx. 196"×54"×98".

#151 - Eagle Mfg. Co. Model YPI-3010 40 Gallon Capacity Flammable Paint/Ink Storage Cabinet.

Contents Not Included. Cabinet has Door Closers, No Key. Approx. 43"×18"×45".

#152 - (9) Mostly 4" Diameter Shaper Cutters.

1-1/4" and 3/4" Bores, Includes Some Bushings as Shown.

#153 - Circular Saw and Router.

(1) Makita Model 5007NB 7-1/4" Circular Saw, 5800 RPM and (1) Craftsman Model 315.269210 2 Peak Hzp Variable Speed Router, Both are 125 Volt.

#154 - Shop Made Wood Table on Casters.

Approx. 97"×26"×29", Top is 3/4" Thick. Last Day Removal Only.

#155 - Rolling Scaffolding Includes (6) 5' x 5' Frames,

(6) Cross Member Supports, (2) 19"× 7' Planks and (4) 8" Casters.

#156 - (2) Shop Made Wood Tables on Casters.

(1) Approx. 49"×32"×30-1/2", Top is 3/4" Thick and (1) 59"×26-1/2"×30-1/2".

#158 - Assorted Sheet Stock.

Including MDF, Particle, Plywood. Sizes to Approx. 8' L. See Photos for Types. Storage Rack Included. Approx 51"×48"×112".

#160 - Grizzly Cabinet Table Saw with Model G4176 Stock Feeder.

Model Unknown, Overall Table Approx. 36"×27", Table is 34"H, 3 HP, Shaper is 220 Volt, Single Phase, Feeder is 115 Volt, also Includes Biesemeyer T-Square and Shop Made Table Extension, S/N: 9117147, Overall Approx. 77"×85"×58".

#161 - Porter Cable 3" x 24" Belt Sander

#162 - Group of Mostly MDF Sheet Stock

Includes (7) 3/4"×48"×96", (6) 1/2"×48"×96" and Assorted Drops.

#163 - (7) Plastic Storage Cases with Assorted Fasteners and More.

Also Includes Wood Storage Cabinet Approx. 26"×16"×64". Also Includes (3) Empty Cases.

#164 - 1/4" Raw MDF Core Sheets.

Including(1) 1/4"×48"×96" Sheet and Assorted Drops.

#165 - Grizzly Shaper.

Model Unknown, Overall Table Size: 20-1/4"×18", Shaper is 115/230 Volt, Single Phase, S/N: 9113715, Approx. 21"×21"×38".

#166 - Makita Model LS1011 10" Slide Compound Miter Saw.

Crosscut Capacity: Up to 12" Width with 3-5/8" Depth, Miter Range: 45° Left - 57° Right, Bevel Range: 45° Left, 115 Volt, Approx. 20"×34"×14".

#167 - Reliable Cutting Tool Panel Crafter 609 Woodworking Jig for Shapers.

Includes Templates as Shown.Jig is Approx. 25"×13"×8".

#168 - Group of Assorted Clamps

#169 - Keller 4' Aluminum Ladder.

225 lb Capacity

#170 - Powermatic Model 66 10" Tilting Arbor Table Saw.

Overall Approx. Footprint is 95"×81" and Table Height of 34", Buyer Responsible For Disassembly Prior to Loading, Includes a Powermatic Accu-Fence, Main Table Approx. 28"x38", Arbor Diameter: 5/8", Diameter of cutting tool: 10", Max. Depth of Cut at 90°: 3-1/8", Max. Depth of Cut at 45°: 2-1/8", Speed: 4,000 RPM, 3 HP, 220 Volt, 3-Phase, S/N: 97661269.

#171 - (15) Sheets of 3/4" x 5'x8' Industrial Grade Particle Board.

.

#172 - Assorted Clear Alder Sheet Stock.

(3) 3/4"×48"×96", 1/4" and 3/4" Drops.

#173 - Grizzly Shaper with Model G1778 Stock Feeder.

Model Unknown, Overall Table Size: 20-1/2"×18", Shaper is 115/230 Volt, Single Phase, S/N: 9113691, Approx. 21"×21"×57".

#175 - DeWalt Model DWS708 12" Double Bevel Sliding Compound Miter Saw.

115 Volt, Approx. 24"×30"×17". Saw is Screwed to Bench. Buyer to Remove.

#176 - Approx. (15) Pipe Clamps.

Mostly 36" L

#178 - (4) 61" x 120" x 1/2" Sheets 2-Sided Hardrock Maple Melamine..

Both Sides Finished

#180 - Weather-Rite Model TOT118VTL Direct Fired Make-Up Air System.

Type: Outdoor, Fuel: Natural Gas, Manifold Size: 1", 208 Volt, 3-Phase, Approx. 78"×60"×142". See Photos of Removal Pathway. Manual and Documentation Included. Seller will Disconnect Gas and Electrical. There will be a fully refundable deposit of $1000 added to your invoice. This fee will be held as a guarantee of removal by the buyer. This deposit will be refunded by mailed check at the time of complete removal. Buyer Responsible for Disassembly and Removal NO LATER THAN AUGUST 7th. If removal is NOT completed by August 7th, Buyer forfeits their rights to the removal deposit, amount paid at auction, and this item itself. Buyer Must Submit a Certificate of Liability Insurance Prior to Removal.

#181 - Assorted Sheet Stock

Including:(2) Sheets 4'x8' Rustic Maple (MDF Core), (1) Sheet 1/4"×48"×96" Rustic Maple (MDF Core).(1) 3/4"×48"x96" Select Maple MDF Core.Also Includes Assorted Drops. See Photos for Types.

#182 - Same as 118

#183 - Makita Model 9900B Belt Sander and Black and Decker No. 7698 Hand Planer.

Makita has Missing Piece as Shown.

#185 - Tool Dock Rolling Router Cabinet.

With Model 315.375000 1/2" Router, 115 Volt, Approx. 30"×28"×37".

#186 - Knotty Alder MDF Core Sheet Stock.

(3) 1/4"×48"×96", (2) 3/4"×48"×96" and Assorted Drops.

#188 - (6) 11SP Visegrips and 6" C-Clamp

#189 - Senco SLP20 18 Ga. Stapler

With Large Selection of Staples

#190 - Ingersoll-Rand Model UP6-15c-125 Grain 15 HP Rotary Screw Air Compressor.

Tank Approx. 24"×60", Indicated Hours: 43,831, Maximum Pressure: 135 PSIG, 230 Volt, 3-Phase, S/N: UP3975U06215, Approx. 72"×29"×65".

#191 - Mostly 1/2" Sheets 2-Sided Hardrock Maple Melamine

1/2" is Finished on Both Sides and Assorted Drops.

#192 - Assorted Maple Ply-Core Sheet Stock.

Includes (17) 1/4"×48"×96" and (3) 1/2"×48"×96".

#194 - Bostitch No. CAP1512-OF TrimAir High Output Compressor.

2.8 CFM, 150 PSI, Oil Free, 1.2 Gallon, 125 Volt, Approx. 17"×12"×13".

#195 - Ritter Mfg. Co. Model R-200-E 5ft x 12ft Face Frame Assembly Easel.

(2) Pneumatic Clamps, Approx. 166"×48"×82".

#196 - Makita Model 9920 3"×24" Hand Sander and a heat tool.

Mfg. Unknown on heat tool.

#197 - (3) Routers

Including (2) Ridgid 18V, (1) Battery and Charger and (1) Porter Cable

#198 - Assorted Shaper Cutters.

1-1/4" and 3/4" Bores.

#199 - Assorted Walnut MDF Core Sheets.

Includes Clear and Rustic, (3) 3/4"×48"×96" Clear, (1) 3/4"×48"x96" Rustic, (1) 1/4"x48"×96" Rustic and Assorted Drops.

#200 - Invicta Model TI-14 Shaper with Grizzly Stock Feeder.

Overall Table Size Approx. 43"×35-1/4", Spindle Vertical Travel: 5-1/2", Spindle Speeds: 3,000 RPM, 4,500 RPM, 6,000 RPM, 10,000 RPM, Shaper is 220 Volt, 3-Phase, Feeder is 230 Volt, Single Phase, S/N: 1840, Overall Approx. 43"×35-1/4"×64".

#201 - Approx. (38) Assorted 1/2" Shank Router Bits.

Storage Rack Not Included.

#202 - Eagle Mfg. Co. Model YPI-3010 40 Gallon Capacity Flammable Paint/Ink Storage Cabinet.

Contents Not Included. Cabinet has Door Closers, No Key. Approx. 43"×18"×45".

#203 - Bosch Hand Planer and Porter-Cable Random Orbit Sander.s.

(1) Bosch Model PL1632 3-1/4" Plane with Dust Bag and (1) Porter-Cable Model 334 5" Random Orbit Sander.

#204 - Assorted Power Tools

Including: Dewalt DW100 Drill, Ridgid 18V Router with (1) Battery, Ridgid 18V Drill with (1) Battery, Makita 6270D 12 Volt Drill with (1) Battery

#206 - (2) Pro Drying Racks.

Approx. 25" x 38" x 73" each. Contents NOT Included.

#207 - Contents of Pegboard

Including: Clamps, Hand tools and More

#208 - Assorted Clamps

(2) Irwin 6", (2) 11SP Visegrips

#209 - Keller 914, 4' Aluminum Ladder.

#210 - (2) Roller Material Standso

(1) 12" w, (1) 16" w

#213 - (3) Shop Fans

#215 - EGS Cat. No. T2H45S Hevi-Duty Shielded General Purpose Transformer.

High Voltage: 480 Delta, Low Voltage: 208Y/120, KVA: 45, 3-Phase, Approx. 23"×16"×28" and 333 lbs.

#216 - (4) Senco Air Nailers/Staplers.

#217 - Plastic Tool Box

With Contents

#218 - Group of Assorted Hand and Power Tools

As Shown