Gwyn J. Halvorson - Complete Line of Farm Equipment Online Only Auction

Gwyn J. Halvorson - Complete Line of Farm Equipment Online Only Auction

Bidding Begins to Close: Monday, September 14th, 2026 @ 6:00 PM CT

Address / Location: W10774 Bemis Road, Humbird, WI 54746

Preview / Open House: Wednesday, September 2nd, 2026, from 10:00 AM – 2:00 PM CDT (W10774 Bemis Road, Humbird, WI)

Pick Up: By appointment on Wednesday, September 16th, 2026 from 10:00 AM – 2:00 PM CDT

NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.

Details: Office Phone: 608-863-8859 

Highlighted Terms: 10% Buyer's fee plus sales tax (exempted where applicable) added to the final bid price. Payments accepted during scheduled pick up: cash, check (accompanied by a letter of guarantee), certified check, cashier's check, or credit card. ACH or wire transfer 24 hours before pick up. A 3.75% credit card convenience fee (plus tax) will apply for credit card purchases. Letter of guarantee must be signed and dated from the issuing bank. 

Sales Representative: Jamie Back
Hansen Auction Group #512-53 
N31952 State Road 93, Arcadia, WI 54612 
www.hansenauctiongroup.com 

Please read the terms carefully as they are a legal binding contract between you and Hansen Auction Group.

Hansen Auction Group reserves the right to alter this agreement at any time. This will take place by updating this website. Please check back and review these terms as every time you use this website, you are agreeing to the terms as they are written at that time.

Hansen Auction Group reserves the right to cancel or reschedule any auction at any time for any reason.

There are no office hours or pick ups on Saturday or Sunday unless specified in the auction details.

Bidding Information:

When you place a max bid the current bid price doesn't automatically go to your max bid. The computer will automatically bid up to your max in the increments specified as other bidders place bids or in the event of a lot with a reserve, it can bid against the reserve.

This auction has what is called an auto-extend feature, meaning the auction will not close until all bidding parties are satisfied. If any bids are placed within the last 10 minutes of the item closing, the bid on lot(s) will extend for 10 minutes. The bidding will extend in 10 minute increments from the time the last bid is placed until there are no more bids, and the lot sits idle for 10 minutes.

Hansen Auction Group has put forth every effort to make accurate descriptions of the items. Printed or verbal statements made by staff are matters of opinion and are made in good faith. However all items are sold AS IS, WHERE IS. You are responsible for your own inspection during the open house inspection periods.

All sales are final. A bid is a legal binding contract between you and Hansen Auction Group.

Hansen Auction Group reserves the right to reject any and all bids for any reason. No allowance will be made for errors in cataloging, genuineness, defects, or imperfections not noted. If a refund is given, it will not exceed the purchase price of the lot.

Bidder responsibilities include, but are not limited to: Bidders agree to keep their password confidential as they are responsible for ANY and ALL activity involving their account. When using the website bidders must obey any and all local, state, and federal laws. Violations will result in termination of website use privileges.

Auction company employees and/or Hansen Auction Group may bid on auction items. Each registered account is considered a bidder once registered on the auction. All registered bidders are treated the same and have the same opportunities to bid and win items on all auctions hosted by Hansen Auction Group.

We gather aggregate information from this website which may include, but is not limited to: number of page visitors, most visited pages, any and all correspondence. By agreeing to these terms, you give Hansen Auction Group permission to send auction marketing emails to the email address on the account.

Payment Information:

There will be a buyer’s fee, plus sales tax (based on the county where the items are located) added to the final purchase price. All fees are taxable if the item is taxable, except the late fee and select title fees if applicable. There is a 3.75% convenience fee for credit card purchases.

Sales tax will only be removed from the invoice if the correct sales tax exemption form is completed and it’s applicable to the state. Please email accounting@hansenauctiongroup.com with any questions.

Payments accepted during scheduled pick up: cash, certified check, cashier’s check, or credit card.

Payments accepted before the scheduled pick up: credit card, wire, or ACH. Hansen Auction Group does NOT offer any payment plans.

A Form 8300 is required to be completed per the Internal Revenue Service (IRS) for any cash payments over $10,000. "Cash" includes cash, certified/cashier's checks, or money orders. Certified/cashier's checks and money orders are considered cash if they are less than $10,000 of value. 

CREDIT CARD PAYMENTS: A signature must be obtained in order to retrieve your auction items for any payments made by credit card. If you are paying over the phone with one of our office locations or our accounting department, you will receive your receipt via email and are required to sign electronically. If a signature has not been obtained, your account will be blocked until Hansen Auction Group receives it.

Check Payments: No Personal Or Business Checks unless accompanied by a letter of guarantee from the issuing bank, which can be emailed or presented as a hard copy. The letter of guarantee must be dated and signed to be valid. E-checks or digital checks are NOT accepted. Please DO NOT MAIL PAYMENTS without prior authorization from one of our office locations or our accounting department. 

If a stop payment is put onto a check or an ACH payment, a $25.00 Stop Payment Fee will be charged. If a check or an ACH payment is redeposited by the financial institution, a $25.00 Redeposit Fee will be charged.

If an ACH payment or a check is returned as NSF or any other reason, a $50.00 Returned Check Fee will be charged per check/ACH. In the event of a returned ACH payment or check, the auctioneer reserves the right to repossess the equipment/property involved at any time and at any location.

Pick Up Information:

Hansen Auction Group employees are present at pick ups to cashier and assist in guiding buyers to their winning bids, unless noted in the auction information details. Customers are responsible for acquiring and loading their item(s) into their vehicles.

We, at Hansen Auction Group, value the safety and convenience for our customers. These terms provides authorization for our team member(s) to load your auction items per your request. Please note, it is your responsibility to ensure that your vehicle or trailer is suitable for the transport of these items and to tie down the items if necessary. We will take care of your items to the best of our ability during the loading process, but we are not responsible for any damage caused to your vehicle, trailer, or your auction items while loading. Any issues while loading needs to be reported to the on-site manager for proper documentation and photos.

Be sure to acquire everything in your lot. You may be charged a Disposal Fee if items are left behind.

Transfer Information:

Please Arrange Your Own Pick Up If Possible.

Items need to be picked up during the scheduled pick up time. Items not picked up due to customers not showing up to pick up or did not have any communication with Hansen Auction Group will incur a MINIMUM $30.00 transfer fee. Requests for items to be transferred back to a Hansen Auction Group office are subject to a MINIMUM $30.00 transfer fee if there is transfer availability. The items on the invoice and the transfer fee must be paid for prior to the end of the scheduled pick up. Call the Hansen Auction Group office number associated with this auction to check the availability for transferring before bidding as it is not always available.
 

Shipping Information:

Call the Hansen Auction Group office number associated with this auction to check the availability for shipping before bidding as it is not always available. We ship through USPS, UPS, FedEx and Speedee. If you would like your item(s) shipped from an offsite auction, a MINIMUM $30.00 transfer fee will be applied to your invoice to deliver your item(s) to a Hansen Auction Group location. The items on the invoice and the transfer fee must be paid for prior to the end of the scheduled pick up. Shipping is standard shipping rates, plus handling (typically $20 or more). Hansen Auction Group will not be responsible for any damage during shipment.

Titled Item Purchases:

All titles will be certified mailed within 3-5 business days of the auction pick up unless title in delay is noted on the auction item. It is the responsibility of the buyer to get the title into their name within 30 days of purchase.

Tax will be added to your invoice based on where the titled item will be registered and/or where the item is being sold from. Please call the Hansen Auction Group office associated with this auction to get more information if needed.

We are a Registered Dealership at our Neenah (WI), Mosinee (WI), and our Princeton (MN) offices. If a titled item is purchased from either of these locations, tax, title, license, processing fee, or MN document fee will be applied to your final invoice. Refer to the Auction Title informational lot at the beginning of each auction for further details.
 

Hunting Item Purchases:

All transfers (background checks) will be conducted by Hansen Auction Group or shipped to a registered FFL Dealer. A $20.00 transfer fee (plus sales tax) per invoice will be added for a background check. The background check will not be completed without a state issued identification card. If a state issued identification card is not presented, Hansen Auction Group will not transfer the item(s) to you. A background check is not required for barrels or uppers. sporting item buyers must be at least 18 years old. sporting item buyers must be at least 21 years old. Out of state sporting item buyers MUST have their sporting item(s) shipped to a local FFL dealer.

Hansen Auction Group offers transfers to our registered FFL Dealer locations. sporting items, and sporting items are $10.00 per hunting item (plus sales tax) to transfer. Our registered Dealer locations are our Neenah (WI), Downing (WI), and Princeton (MN) offices.

If a hunting item is bid on by an individual who has already been denied through a background check previously, the individual will be fully responsible for the payment of the hunting item without receiving the purchase. Failure to comply will result in termination on Hansen Auction Group’s bidding platform.

Miscellaneous Information:

All disputes will be settled by arbitration in the county the auction took place in or the county of the new buyer.

Media used on Hansen Auction Group’s bidding platform or marketing platforms cannot be used by customers.

After Pick Up Information:

If purchases are not settled by the end of the scheduled pick up, it is in default. If payment is not received by the end of the scheduled pick up, Hansen Auction Group will charge the card on file for the invoice amount due, including the auction items, a 3.75% convenience fee on total amount due, a MINIMUM $30.00 late fee, and a MINIMUM $30.00 transfer fee if applicable.

Picking up items outside the scheduled pick up time is often not available and if it is, will incur additional charges. The winning bidder should NOT show up unannounced without permission from the seller, or by being accompanied by a Hansen Auction Group Representative after pick up hours are complete. Trespassing charges may apply, without proper authorization from the seller.

Any paid or unpaid item(s) remaining after the auction end date, and no communication has been made with one of our offices, the item(s) are considered forfeited and become property of Hansen Auction Group. If items are transferred from another office location, items will be forfeited and deemed Hansen Auction Group’s property after 14 days of when the items arrive at the facility and the customer is notified. If items are forfeited and Hansen Auction Group’s property, Hansen Auction Group can resell item(s) on an upcoming auction and keep consignment money. No refunds or exceptions will be given to customers.

Upon default, the bidder will be terminated on Hansen Auction Group’s bidding platform. If you are terminated and would like to get in good standing with Hansen Auction Group again, it will be on a case by case basis, it is not guaranteed. Contact us at accounting@hansenauctiongroup.com or info@hansenauctiongroup.com for more information.

If you do not understand these terms or the bidding platform, DO NOT BID. Please give us a call. We can walk you through it and answer questions.

Office Locations:

GENERAL INFORMATION & INQUIRIES: 715-607-4088

Arcadia, WI Office: 608-863-8859

Downing, WI Office: 715-265-4656

Fort Atkinson, WI Area: 920-691-2922

Las Cruces, NM Office: 575-800-4648

Marenisco, MI Office: 906-477-3749

Mosinee, WI Office: 715-539-6295

Neenah, WI Office: 920-383-1012

Princeton, MN Office: 763-389-5700

Specialized Departments:

Accounting: 715-607-4680

Real Estate: 715-607-4411

#1A • Payment Information

10% Buyer's fee plus sales tax (exempted where applicable) added to the final bid price. Payments accepted during scheduled pick up: cash, check (accompanied by a letter of guarantee), certified check, cashier's check, or credit card. ACH or wire transfer 24 hours before pick up. A 3.75% credit card convenience fee (plus tax) will apply for credit card purchases. Letter of guarantee must be signed and dated from the issuing bank. If purchases are not settled by the end of the scheduled pick up date(s) and time(s), it is in default. Upon default, the bidder will be blacklisted on Hansen Auction Group bidding platform and the buyer’s credit card will be charged for default. If merchandise is not paid or picked up at the close of the auction pick up and you have made no contact with our office to make arrangements, your merchandise will be forfeited back to Hansen Auction Group.

#1B • Open House Date

Open House: Wednesday, September 2nd (10:00am - 2:00pm). W10774 Bemis Road, Humbird, WI 54746

#1C • Pick Up Information

Pick Up: By appointment on Wednesday, September 16th (10:00am - 2:00pm). Your invoice will be emailed to you shortly after the close of the sale, along with a Shipping Saint link to schedule your pick up appointment. Heavy Equipment Loading Available. W10774 Bemis Road, Humbird, WI 54746

#1D • Inspection and Vehicles

All items are sold as is, where is. Inspection before bidding is highly encouraged during open house. Hansen Auction Group is not liable or responsible for making claims on the road worthiness or drivability of any item. Please assume items need to be hauled from the auction pick up.

#1E • Transfers

Please call 608-863-8859 in advance to see the possibility of lot(s) getting transferred to one of our Hansen Auction Group WI or MN office locations. Transfer fees start at a minimum of $30.00. Invoices need to be paid in full, including your transfer fee before your items are transferred to one of our Hansen Auction Group locations.

#1F • Shipping

Please call 608-863-8859 in advance to see the possibility of lot(s) getting shipped. We ship through USPS, FedEx, or UPS. Hansen Auction Group is not responsible for any damage during shipment. Transfer fees may be incurred for moving items to one of our Hansen Auction Group locations to be shipped. Payment for the auction items must be completed by the end of the scheduled auction pick up. The shipping fee will be added as an additional fee to your invoice once the packaging is complete. Hansen Auction Group will not ship any packages that don’t have the shipping fee paid for.

#1G • Tax Exemption

Sales tax exemption forms will be accepted on applicable purchases if a valid sales tax exemption form is completed and in compliance with the corresponding state's guidelines. If you qualify for a sales tax exemption and already have a valid exemption form on file with us, we can verify your exemption form at time of payment. If a form is not on file, you may complete the appropriate exemption form at time of payment as well. Sales tax will only be removed from your invoice after a valid exemption form has been received and verified.

#2561 • John Deere 4450 Tractor

SN: RW4450HD19454, Hours read: 2,238 hours but are not accurate per seller, power quad, 540 and 1000 PTO, 3 point arms, missing third link, slide hitch, dual rear remotes, 18.4-38 rears, (4) rear wheel weights, runs and drives per seller

#2562 • John Deere 4430 Tractor

SN: 013407R, Hours read: 5,000 hours, power quad, dual rear remotes, 3 point arms, missing third link, slide hitch, (4) wheel weights, runs and drives per seller

#2563 • John Deere 4630 Tractor

SN: 030936R, Hours read: 2,097 hours, odometer has rolled over, power quad, quick connect 3 point, slide hitch, dual rear remotes, 20.8-38 rear tires and duals, (9) suitcase weights

#2564 • John Deere 5020 Tractor

SN: T313R020190R, Engine is locked per seller, 540 and 1000 PTO, 18.4-38 rear tires, hub mount duals, front weights, 3 point arms, slide hitch

#2565 • Ferguson TO35 Tractor

SN: 151937, Unknown hours, 3 speed high and low, 3 point hitch, 12.4-28 rear tires

#2566 • Case 730 Gas Wide Front Tractor

SN: , Hours read: 3,609, hours 3 point hitch, slide hitch, dual rear remotes, 16.9-34 rear tires, has weak clutch, runs and drives per seller

#2567 • McCormick Farmall 560 Gas Tractor

SN: 38505 SY-CC, Hours read: 5,758.6 hours, 540 PTO, slide hitch, 13.6-38 rear tires, single rear remotes, runs and drives per seller

#2568 • Allis Chalmers C Narrow Front Tractor

Unknown SN, Goodyear 11.2-24 rear tires, 540 PTO, draw bar, unknown running condition

#2569 • John Deere A narrow Front Tractor with Loader

Unknown SN, hasn't run in years, inspection recommended

#2570 • John Deere 60 Narrow Front

SN: 6016267, runs and drives per seller

#2571 • Ford New Holland TR98

SN: 563244, Hours read: 3,776 hours, separator hours: 2,747 hours, buddy seat, 2 wheel drive, with bin units, front tires 30.5-32 tires, rears 14.9-24, runs and operates per seller

#2572 • Ford New Holland TR86

SN: 531391, Hours read: 4,645 hours, hydraulic assist, front rice tires 30.5-32, rear tires 16.9-26, runs and drives per seller

#2573 • New holland 974 Corn Head

(6) Row narrow with metal snoots

#2574 • New Holland 973 Bean Head

SN: 544998, 16' flex head

#2575 • New Holland 973 Bean Head

SN: 586690, 18' flex head

#2576 • New Holland 974 Corn Head

Unknown SN, (6) row narrow, metal snoots, missing (1) gathering chain, (1) bent snoot

#2579 • New Holland 960 Bean Head

SN: 340427, Love bar head

#2580 • 1987 International S1900 Grain Hauler (Has WI Title)

VIN: 1HTLDUXNXHH481241, ODO reads: 67,891 miles, 466 diesel International engine, 5 speed manual transmission,16' box, twin cylinder, runs and drives per seller

#2581 • 1989 GMC Top-Kick C7 Cab and Frame (Title?)

VIN: 1GDM7D1Y1KV519679, ODO reads: 300,813 miles, GM 8.1 diesel engine, 6 speed manual transmission, unknown running condition

#2582 • 1974 Chevy C60 Grain Truck (Title?)

VIN: CCE614V136080, ODO reads: 80,699 miles, 350 V8 engine, 8 speed high low, 12' box, dually tires, unknown running condition

#2583 • Dodge Flatbed Truck (No Title, For Parts)

Unknown VIN, no motor, 14' bed, will need to be trailered. This vehicle is being sold without a title and is intended for parts use only. Buyers may pursue a bonded title at their own expense; however, approval is not guaranteed. Hansen Auction Group does not assist with or guarantee the bonded title process.

#2584 • Westfield 8 x 46 Grain Auger

7.5 HP Electric motor, 220V

#2585 • Farm Fans Grain Dryer

SN: 14070, Model: AB-12B, 180 bushel, LP, 220V, unknown working condition

#2586 • 1,000 Bushel Wet Bin

On transport

#2587 • Aluminum Extension Ladder

20' Total reach

#2588 • Box Truck Body

Measures 16' x 8', roll up door

#2589 • 16' Tandem Axle Flatbed Trailer (No Title, For Parts)

Measures 16' x 8', buried in dirt, will need to be trailered

#2590 • (4) Farm Shop Self Locking Head Gates

Includes (2) 7' gates, (1) 6' gate, (1) 10' gate, buyer's responsibility to remove

#2591 • (4) Sections of J-Bunk

8' Sections

#2592 • 550 Gallon Diesel Tank

With Gasboy pump, SN: 8011946, Model: 7364

#2593 • 300 Gallon Gas Barrel

With hand pump

#2594 • 250 Gallon Tank

With hand pump

#2595 • 1985 Ford F700 Box Truck (Title?)

VIN: 1FDNF70H9FVA24209, ODO reads: 47,933 miles, 370 V8 engine, 4 speed manual transmission, 18' box, has not run in years per seller, unknown current running condition

#2601 • GEHL 600 Chopper

SN: 5713, 1000 PTO, 72" hay head

#2602 • New Holland 243 Running Gear

SN: 42862, (6) bolt rims, floatation tires, extenda pole

#2603 • John Deere (5) Bar Rake

Metal teeth

#2604 • John Deere 700 Grinder Mixer

540 PTO, shows rust, includes (2) extra screens, inspection recommended

#2605 • John Deere 700 Grinder Mixer

SN: 001237N, 540 PTO, Includes (3) extra screens

#2606 • John Deere 700 Grinder Mixer

SN: 001244N, 540 PTO, Includes (1) extra screen

#2607 • John Deere 700 Grinder Mixer

SN: 001777N, 540 PTO, Includes (1) extra screen, needs a tire

#2608 • Glencoe (9) Shank Disc Chisel

SN: 74943, Hydraulic lift, heavy springs

#2609 • 15' Great Plains 3 Point Drill

SN: 1421, Model: 247584 0134, 7" Spacing, press wheels, gauge wheels

#2610 • 3 Point Head Cart Caddie

Heavy duty cylinder, 9L-15 tires, pin hitch

#2611 • J & M Gravity Box

Measures 10' x 7', no running gear, 182 bushel, wood runners

#2612 • 7' John Deere Brush Mower

Unknown SN, 3 point hook up, 540 PTO, slip clutch, unknown working condition

#2613 • (10) Wheel V Rake

3 Point hook up, steel wheels, manual lift

#2614 • Paul Portable Livestock Scale

SN: K96233, Model: 308 4000, on transport, takes 2" ball

#2615 • John Deere 542 Heavy Duty Front cutting tool

SN: 27339GL, 8' cutting tool, inquire about brackets

#2616 • (2) Wheel Cart with Winch

Inspection recommended

#2617 • Owatonna 540 Stacker

SN: 1021, 540 PTO, 10.00 Tires

#2618 • Vermeer 3 Point Bale Mover

48" Hydraulic cylinder, (2) 48" forks

#2619 • Lindsey (4) Section Drag

5' Sections, pin hitch, on cart

#2620 • John Deere 450 (6) Bottom Plow

SN: 103075A, 16" Spacing, 3 point hook up

#2621 • Wil-Rich 27' Field Cultivator

Unknown SN, walking tandems, (3) bar harrow, wide shovels, tires need air

#2622 • New Holland S717 Chopper with 727 Hay Head

SN: 67349, 540 PTO, Hay head, SN: 2198, 5' head, includes single row corn head, tires are flat

#2623 • 8" x 40' Grain Auger

Top drive, manual drive, includes grain tub

#2624 • IH 400 Cyclo (6) Row Corn Planter

SN: 0970000U015087, Dry fertilizer tubs, inspection recommended

#2625 • Brady 144 (4) Row Stock Chopper

SN: 01172, 12' Wide, 540 PTO, John Deere hydraulic cylinder, (2) wheel

#2626 • Kory Gravity Box on Kasten Running Gear

Kasten running gear model: 80, (6) bolt rims, extenda tongue

#2627 • John Deere Van Brunt 8' Grain Drill

Grass seed, clutch lift, single disc

#2628 • Feterl Grain Cleaner

Has electric motor, 110V

#2629 • John Deere 300 Elevator with Drag

SN: SNE0300045093C, Approx. 40', 540 PTO, on transport, needs tires

#2630 • Oliver 5 x 16 Plow

3 Point hook up, hydraulic lift

#2631 • Knowles 77 Running Gear

SN: 425, (6) Bolt rims, extrenda tongue, with wood runners

#2632 • Farm & Fleet Gravity Box

On Kory 6072 running gear, (6) bolt rims, extenda pole

#2633 • Killbros 375 Bushel Gravity Box

On John Deere 1065 running gear, floatation tires, extenda pole, box has extensions

#2634 • Flow EZ 300 Gravity Box

On unknown running gear, (6) bolt rims, wood runners

#2635 • For Most A-25 Portable Head Chute

Self locking head gate, rear catch, measures 80" x 30"

#2636 • New Holland 850 Round Baler

SN: 380175, 540 PTO, inspection recommended

#2637 • Running Gear

(6) Bolt rims, unknown brand

#2638 • IH 800 Corn Planter

SN: 0970746U00268, (6) Row, dry fertilizer

#2639 • Running Gear with Guard Rail Pieces

(7) Sections, longest is 13', (5) bolt rims, no tongue, flat tires

#2640 • Husty 225 Gravity Box

On Minnesota running gear, SN: 116131, extended sides, floatation tires, extenda pole, steel runners, (6) bolt rims

#2641 • Dakon Gravity Box on GEHL Running Gear

Steel runners, extenda pole, extended sides

#2642 • Ficklin 185 Gravity Box on Running Gear

Model: 1000 running gear, extenda pole, extended sides, (1) flat tire

#2643 • Fleet Farm Gravity Box on Running Gear

Unknown running gear, extended sides, wood runners, extenda pole

#2644 • Kelly Gravity Box on Running Gear

Extended sides, steel runners, (6) bolt rims

#2645 • Krause 10' Disc

SN: 3350, Model: 139, hydraulic lift, cracked gains, no hitch

#2646 • Howard V-Chisel

SN: 5051, Model: 365B, 3 point hook up, solid shank, set at 36" spacing, adjustable

#2647 • John Deere 3200 5 x 16 Trailer Plow

SN: 100163A, JD Cylinder, needs tires, inspection recommended

#2648 • Krause 20' Wing Disc

SN: 1412, Model:15, hydraulic fold and lift

#2649 • Sullair Quiet 185 Compressor

John Deere motor, SN: 551278T, model: 4219DF 01, pin hitch, unknown working condition

#2650 • Lime Spreader

540 PTO, 16' Chain, on heavy duty truck frame, 13' box

#2651 • John Deere (3) Bottom Plow

3 x 14 Trailer plow, flat tires

#2652 • American Fiberlite 15' Canoe

Fiberglass construction, (4) wood paddles

#2653 • sporting supplies Lake 15' Boat and Motor (For Parts)

SN: 116 1212, with Evinrude motor, sold as is for parts, inspection recommended

#2654 • H & S 295 Tandem Axle Spreader

Poly floor, 540 PTO, rear end gate

#2655 • 9' Cultipacker

10' Hitch

#2656 • Kewanee 17' Field Cultivator

Sodbuster bar, hydraulic wings

#2657 • (4) Row Stalk Chopper

540 PTO, (2) Wheel

#2658 • Tandem Axle 28' Trailer Frame

Measures 28' x 8', flat tires

#2659 • John Deere Cab

Missing and broken glass, inspection recommended

#2660 • New Holland 469 Haybine

SN: 166209, 540 PTO, Rubber rollers

#2661 • Bale Spear

3 Point connect

#2662 • 88" Road Drag

Adjustable height, chain hook up

#2663 • SSM Skid Steer Grapple Bucket

(3) Tine Grapple

#2664 • Feterl 61 x 8 Grain Auger

10 HP 220V Electric motor, unknown working condition

#2665 • Glencoe 22' Field Finisher

Hydraulic fold, pin hitch

#2667 • 500 Gallon LP Tank

Tank is empty

#2668 • Tilting Trailer Bed

Measures 14' x 8', stake pockets, unknown working condition

#2669 • Tailgate Lift

Unknown working condition

#2670 • Bale Conveyor

24' Conveyor, unknown working condition

#2671 • Bale Conveyor

Approx. 70' of sections, no chains

#2672 • Firestone Tractor Duals

Size 18.4-38, with clamps

#2673 • Goodyear Tractor Duals

Size 20.8-38, with clamps

#2674 • Goodyear Tractor Duals

Size 18.4-38, with clamps

#2675 • Sucker Rod

Approx. (21) 20' pieces

#2676 • 38" Inserts for Duals

Unknown size

#2677 • Telephone Poles

Various lengths, longest is 45', buyer's responsibility to remove

#2678 • Snow Pusher cutting tool

6' Long, no mounting bracket

#2679 • Snow Pusher cutting tool

6'-6" Long, no mounting bracket

#2680 • 8'-3" Aluminum Pickup Topper

Side doors, ladder rack on top

#2682 • Earth Pro Tractor Tires

Size 18.4-38

#2683 • Firestone Tractor Tires

Size 24.5-32, on New Holland rims

#2684 • Tractor Tires

Size 20.8-34 and 20.8-38, take offs

#2685 • (5) Assorted Tires and Rims

Includes (6) bolt and (8) bolt rims

#2686 • (8) Assorted Tires and Rims

Includes (6) bolt rims, (8) bolt rims, and split rims

#2687 • (2) Truck Tires

Size 900-20, (8) bolt rims

#2688 • (2) Trailer Tires

Size 235/85R16, on (8) bolt rims

#2689 • (8) Tires on Rims

Various sizes

#2690 • (7) Tires on Rims

Various sizes

#2691 • (4) Tires

(3) Size 8-17.5LT, includes partial axle

#2692 • (6) Tires

(1) Front tractor tire 7.50-16 and (5) assorted sizes

#2693 • (4) Semi Split Rims and Tires

Size 10.00-20

#2695 • 300 Gallon Fuel Barrel

Has pump, pump does not work

#2696 • 200 Gallon Fuel Barrel

Pump handle turns, unknown working condition

#2697 • 250 Gallon Fuel Barrel

Pump is in working condition per seller

#2699 • (3) Sets of Pallet Forks

Forks are all 40" long, range from 4" to 5" wide

#2700 • (3) Sets of Pallet Forks

Forks are all 40" long, range from 4" to 5" wide

#2701 • 3" x 10' Auger

Auger only, unknown brand

#2702 • True Temper Wheelbarrow

Wooden handles, 5 cu. ft.

#2703 • Semi Tractor 5th Wheel Hitch

Unknown brand

#2704 • Hog Feeder

36" Diameter, (8) feeding stations

#2705 • (2) Truck Tires

Size 235/85R16, on (6) bolt rims

#2706 • (2) Semi Tires with Split Rims

Size 10R-22.5

#2707 • (2) Tires

Size 13.6-16, (6) bolt rims, diamond tread pattern

#2708 • (4) 16" Rims

(8) Bolt pattern

#2709 • (2) Haybine Tires

Size 3.50-16.1, (8) bolt rims

#2710 • Tractor Dual

Size 18.4 - 34

#2711 • Hog Crate

Measures 8' x 47", 3 point hook up, fork pockets

#2712 • Kasten Wood Hauler with Contents

Measures 13' x 5', 9.00-20 tires, (8) bolt rims, includes scrap metal and wire

#2714 • Agri-Fab 30 Gallon Tank

Tank only

#2715 • Assorted Metal Pipe

Pipe ranges from 12' long x 1-1/2" to 10' x 1"

#2716 • I-Beam with Trolley

Beam is

#2717 • Heavy Duty Army Cart

Measures 10' x 6', no floor, for frame or axle, 9.00-20 tires, (1) tire is flat

#2718 • GEHL 99 Blower

SN: 8978, Model: FB99, no belt, unknown working condition

#2719 • (4) Skid Steer Tires

Size 12-16.5, (2) have tubes

#2720 • Square Transfer Tank

Includes Fill-Rite electric pump, unknown working condition, has plug end

#2721 • (5) Semi Tires

Size 11R 22.5, (4) rear lug tires, (1) front tire, (4) with split rims

#2722 • 3" x 20' Auger

No motor, holes in pipe

#2723 • Loader Bucket

Measures 7'-2" x 32" x 26", no mounting bracket

#2724 • Roll of 4" Drain Tile

Unknown length

#2725 • Unknown Running Gear with a Hoist

Deck of wagon is rotted, pin hitch, (5) bolt rims

#2726 • Tractor Dual

Firestone size 18.4-38

#2727 • (2) Firestone Tractor Tires

Size 18.4-38, (10) bolt rims

#2728 • (5) Steel U Beams

Beams measure 6-1/2" x 4" x 3/16"

#2729 • Poly Tank in Metal Pallet Cage

Tank measures 4' x 40", has drain valve

#2730 • (4) Gravity Box Side Extensions

(2) 10' x 14" Panels, (2) 7' x 14" panels, (1) 10' panel has dents

#2731 • 66" Skid Steer Rock Bucket

Unknown brand, quick connect plate

#2732 • (2) Semi Axles with Tires

(1) Has tire size 255/70R22.5, (1) 8R19.5,

#2733 • (2) Trailer Axles

68" Hub to hub, includes springs

#2734 • Pieces of I Beam

(2) 10' 5" x 6-1/2", (1) 58" x 12" piece

#2735 • Pile of Scrap Metal

Metal pipe brackets, 16-1/2" of flat stock, and more

#2736 • (2) Coils of Cable

(1) 1/2" unknown length piece, (1) 3/8" coil unknown length, has clevis on end

#2737 • Pick Up Truck Rear End Axle

8 Bolt rims, 265/75R16 tires, has springs and pumpkin

#2738 • (3) Cattle Gates

Size 14' x 4', some have dents

#2739 • Assorted Tin Pieces

Longest is 18' 3", includes piece of 4' x 8' x 2" foam insulation

#2740 • Front Axle for Large Truck

8 Bolt rims, 8R19.5 tires, steering linkage, springs,

#2741 • (4) Metal Screens

Measure 35" x 35", includes (2) small pieces 18" x 18"

#2742 • Various Wood Lumber

(10) 4"x 4" x 12' 6" Pieces, (12) 2" x 4" x 12' pieces, all have been exposed to weather

#2743 • Assorted Farm Tires

(1) 6 Bolt rims, tire size 7.50-16, (2) 8 bolt rims tire size 10.00-16

#2744 • (4) Semi Tires

Size 295/75R22.5, (1) has sticker on it still

#2745 • Forager Chopper Box Body

No running gear, buyer responsible for removal, will need to be lifted by buyer

#2746 • Portable Ladder Hoist

Unknown working condition, second ladder section not connected

#2747 • Calhoun 5 Ton Running Gear

(5) Bolt rims, 15" tires

#2748 • 9' Boom with Fork Pockets

Has 6' hoist bar

#2749 • (2) Goodyear Tractor Tires

Size 16.9-26, (8) bolt rims

#2750 • Heavy Duty Tandem Trailer Frame

Frame measures 11'-6" x 5', (6) bolt rims, 9.50-15 tires, with jack, pumps up when tested, includes (5) 9.00-20 Dunlop tires

#2751 • Tractor Cab

Cab fits 55 Oliver

#2752 • 3 Point Quick Connect Hitch

Missing (1) release knob

#2753 • Poly Lick Wheel Tub

Approx. 6' diameter x 22", has top

#2754 • Stainless Steel Tank for Maple Sap

Measures 8'-2" x 46-1/2" x 36", has 19-1/2" counter and (2) top lids

#2755 • Stainless Steel Sink

Measures 78-1/2" x 47" x 27", has lower drain pipe

#2756 • John Deere Sickle Mower

7' cutting tool, 3 point hook up

#2757 • Farmhand Tractor Loader with Bucket

SN: 3151, Model: F11 A, 5' bucket, with brackets

#2758 • WIFO 3 Point Forklift Mast

Includes bale spears and forks, 6' mast

#2759 • 38' Tractor Dual Rim

No clamps included

#2760 • (2) Goodyear Tractor Tires

Size 16.9-26, (8) bolt rims

#2761 • Feeder Box

Measures 5' x 38" x 78"

#2762 • (2) Goodyear Wagon Tires

Size 18.4-16.1, (1) has (8) bolt rim

#2763 • John Deere Front Rock Box

Measures 29" x 40" to end of brackets x 24"

#2764 • 5-1/2" x 13' Grain Auger

Includes hopper bottom

#2765 • 6" x 15' Westfield Grain Elevator

No motor, has pulley

#2766 • 7' Snow Machine Blower

3 Point hook up, 540 PTO, manual chute adjustment

#2767 • 3 Point Bale Mover

(2) 50" Forks

#2768 • ARFS 730 Backhoe

SN: 4126, 3 Point hook up, downriggers, includes 22" and 12" buckets, unknown working condition

#2769 • Enclosed Utility Trailer

Measures 8' x 6', tin top, pin hitch, sliding rear door, with lights

#2770 • Hay Wagon on Running Gear

Deck measures 15' 10" x 8', needs new decking, E-Z running gear, extenda pole, 11L-14 tires on 6 bolt rims

#2771 • Parts Washer on Barrel

Wash tub measures 31" x 20", barrel has holes in bottom

#2772 • (4) New Implement Tires

Size 11L-15, no rims

#2773 • 16" Rim

(8) Bolt pattern

#2774 • (2) Trailer Tires

Size 7.50-16

#2775 • (2) Implement Tires

Size 9.5L-15, on (6) bolt rims

#2776 • (3) Truck Tires

Size 245/75R16, no rims

#2777 • (2) Flotation Tires

Size 16.5L-16.1

#2778 • Truck Tire

Size 235/85R16

#2779 • (2) 16" Rims

(8) Bolt pattern

#2780 • Delta UTV Toolbox and FatMax Toolbox

Delta box measures 56" x 22" and FatMax measures 29" x 12" x 12"

#2781 • UWS Diamond Truck Toolbox

Measures 6' x 20" x 15"

#2782 • LaCrosse Rubber Boots

Size 13

#2783 • (4) Steel Caster Wheels

6" Wheels

#2784 • Fuel Barrel Pump

GPI brand, comes with hose and handle, unknown working condition

#2785 • Spot Light, Air Hose Splitter, and 3" Screws

Spot light appears new in package as does splitter

#2786 • New Sump Pump Drainage Kit

1-1/2" hose, male adapter, rodent evidence

#2787 • Lakewood Metal Fan

Unknown model, 17" fan cutting tool

#2788 • Large Gathering Chain

Chain fits New Holland combine, is new but shows rust

#2789 • Semi Exhaust Pipes and Shield

Pipes are chrome, longest pipe is 6' 6"

#2790 • Enforcer Electric Fence Power Supply

Model: DE 600, worked when tested

#2791 • Box of 16D x 3-1/2" Nails

Appears to be full box

#2792 • New Receiver Hitch

Model: 421, appears complete

#2793 • Gravity Box Drainage Chute

30" Widest point, has been rewelded

#2794 • Miller Legend Portable Welder

SN: KE617840, Model" 3039, 18 hp gas engine, works per seller

#2795 • Aerator and Dryer

Comes with auger 6'-7" tube and fan, fan worked when tested

#2796 • Aerator and Dryer

Comes with auger 6'-7" tube and fan, fan worked when tested

#2797 • Aerator and Dryer

Comes with auger 6'-7" tube and fan, fan worked when tested

#2798 • (2) Push Mowers

(1) Husqvarna self pro propelled mower, model: 65021CHV, 6.50 hp engine, pulls freely, (1) MTD SN: 1B199K20686, model: 11A-504C000, pulls hard, 5.00 hp

#2799 • Chicago Electric Portable Generator

Electric start, in metal cart on wheels, 120V, unknown working condition

#2800 • DeWalt Chop Saw and Clarke Circular Saw

DeWalt SN: 306923, model: DW871, both powered up when tested

#2801 • 7 Gallon Air Tank

Comes with hose and gauge

#2802 • 1-1/2 Ton Chain Hoist

Works as it should

#2803 • Metal Toolbox

Measures 26" x 12" x 14", includes contents

#2804 • 540 PTO Shaft

21" Shaft, square end

#2806 • Metal Box

Measures 24-1/2" x 15" x 12", handles on both ends

#2807 • Knipco Space Heater

Electronic ignition, dual fuel, wheels are broken, unknown working condition

#2809 • Metal Tractor Seat

Has bracket but is broken

#2810 • Metal Box with PTO Parts

Includes U joints, shaft to square PTO, and rake teeth included

#2811 • John Deere TRS 26 Snow Blower

SN: MOTR26A01043, Model: TRS26 WBSB, electric start, pulls freely, untested, tires are flat

#2812 • AP Ferrell Fanning Mill

1 HP electric motor

#2813 • Manual Fanning Mill

Hand crack, works when tested

#2814 • John Deere TRS 26 Snow Blower

SN: MOTRS26A012693, Model: TRS26 WBSB, electric start, pulls freely, untested

#2815 • Portable Auger Unit

Briggs & Stratton 7 hp engine, pulls freely, comes with 9", 6", and 3" auger heads

#2816 • Calf Chute

Measures 64" x 3' x 61"

#2817 • Miscellanous Shop Items

Includes Gasboy pump, PTO shaft, ladder and more

#999999 • This is the Last Lot of the Auction!

Thank you for bidding with us!