July Machine Tools Marketplace Online Only Auction
Bidding opens on Thursday, July 9th at 6:00am CT
Bidding begins to close on Thursday, July 23rd at 10:00am CT
8370 W 35W Service Drive NE – Blaine, MN 55449
NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.
Auction Preview: Wednesday, July 22nd from 8:00 am to 3:00 pm or daily by appointment only.
Auction Checkout: (Closing times are sharp)
Monday, July 27th from 8:00 am to 3:30 pm
Tuesday, July 28th from 8:00 am to 3:30 pm
Wednesday, July 29th from 8:00 am to 3:30 pm
#.1 • Lot .1
All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification. It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building. Auction Location: 8370 W. 35W Service Drive NE Blaine, MN 55449 Unless noted otherwise in item descriptions. Items at "offsite" locations must be removed within the scheduled removal period. Rigging information will be posted on larger items. Buyers must hire a licensed and insured rigger for these items (Normally the posted rigger per the sellers request). All payments must be made at our office. Payments will not be accepted at "offsite" locations. UPS shipping and LTL are not available for offsite items. Associated Fees: Buyers Premium: 15% Sales Tax::8.375% Card Convenience Fee: 4% Payment can be made onsite by Cash, Credit, Check (Checks over $2000 will not be accepted without a Bank Letter of Guarantee), Wire (Buyer Must Add $15 for Transfer Fee), Wire Transfer instructions will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Auction Preview: Wednesday, July 22nd from 8:00 am to 3:00 pm or daily by appointment only. Auction Closing: Thursday, July 23rd Beginning at 10:00 am This auction will close at a rate of (5) lots per minute with 1 minute extended bidding. Auction Checkout: (Closing times are sharp) Monday, July 27th from 8:00 am to 3:30 pm Tuesday, July 28th from 8:00 am to 3:30 pm Wednesday, July 29th from 8:00 am to 3:30 pm Payment and removal is due by 3:30 pm of Wednesday, July 29th. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Rigging: Larger items requiring a forklift to load will display a loading fee. This fee will not be added to your invoice. Please add any loading fees to your total if you require this service. We ask that buyers bring appropriate trailers/transportation for their purchases. Excessive strapping, blocking, disassembly will result in increased loading fees. Buyers are free to load their purchases at our facility using non-powered equipment but must bring their own help as auction staff will not assist. Buyers will be responsible for any damages/injuries caused while loading their own purchases. Ground level removal only. Plan accordingly. Shipping: Available for "Hand Carry" Type Items Only. Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up. UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300. The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in item abandonment regardless of payment status, and an irrevocable permanent ban from all future auctions. Auctioneer: Jim Nelson (612) 991-7008 jim@premiermachineryauctions.com License no. MN 62-26-06
#1 • Gerstner Model 042, Wood 11-Drawer Machinist Tool Box.
Overall 30" x 9-1/2" x 16".
#2 • Bridgeport Textron 15" Rotary Table with (4) Custom Fixture Plates.
Rotary Table Approx. 23"×22"×6". (2) Steel Fixture Plates: 16"×1" & 23"×3/4" and (2) Aluminum Fixture Plates: 14"×1" & 16"×1/2". Load Fee: $20.00
#3 • Kurt Model PT600A, 6" Machine Vise with Fixture Plate.
Fixture Plate Measures: 10" X 15-1/2".
#4 • Meyer Model M-1 .061" to .250" Minus Gage Pin Set.
In Metal Case. Missing 0.102".
#5 • Superior Model: F49-S Commercial Freezer on Casters.
115 Volt, Approx. 55" x 31" x 84". Load Fee $20.00.
#6 • (2) Ball Screw Assemblies.
All Dimensions are Approx. (1) 30"×1-3/8" Thread and (1) 23"×1-1/2".
#7 • Assorted Hand Tools.
Metric Craftsman and Gear Wrenches. Snips and Hacksaws. Warner Tool Box. And More.
#8 • Union-Card Decimal Equivalent Metal Sign.
16" x 22". Metal Sign with Cardboard Backing.
#9 • Kurt CT2SH-4 Workholding Tombstone.
4-Sided with 2" Wide Kurt Vises on each side with Stops on each vise. Base Approx 5.25" Square.
#10 • Woodstock International/Shop Fox Model W1707, 17" Vertical Bandsaw.
Max. Cutting Width: 16-1/8", Max. Cutting Height: 12", Table Size: 23-1/4"x17-1/2", Table Angles (Max.): 45° Right/ 15° Left, cutting tool Speeds: 1,600 & 3,300 RPM, cutting tool Range: 1/8" -1", cutting tool Length: 132", Includes Extra cutting tool and Manual, 2 HP, 220 Volt, Single Phase, Approx. 28"x18"x75" and 330 lbs. Load Fee: $20.00
#11 • Skilsaw and Angle Grinder.
Skilsaw Model 551 Trim Saw. 5-1/2" cutting tool. 120 Vac. 6.5 Amps. Black & Decker Model 4247 Angle Grinder. 4-1/2". 120 Vac. 6.0 Amps..
#12 • Rockwell American Trailer Axles, Hubs, Hydraulic Pump/Reservior and Hydraulic Cylinders for Lift/Lower Trailer.
Includes: (4) No. SPEF60930000B9CR6B 6-Bolt Posi-Lube Equipped Hubs, (2) No. SPEF50800000E9CB 60" Torsion Bar Axles, (2) Prince Hydraulic Model PC3008CL-ASAE 3,000 P.S.I. 8" Stroke Hydraulic Cylinders and Hydraulic Pump/Reservoir System. Note: See Lot 662 for Same Axles and Hubs Without Hydraulic Components. Load Fee: $20.00
#13 • 8" 4-Jaw Chuck with Approx. 2-1/8" Thru Hole.
Chuck Body: 3", Includes Chuck Key.
#14 • Walker Fine Line Electromagnetic Chuck on Compound Sine Base Plate.
6" x 12" Surface. Model BXM-2939-1392, 115V. Chuck. Overall: 7" Distance From Base to Top.
#15 • Grundfos Centrifugal Pump.
Model: A-98394760-P3-1919. See Product ID Tag for All Addition Details.
#16 • Kurt Model D675 Precision Machine Vise.
With Custom Aluminum Jaws and Swivel Base.
#17 • Brown & Sharpe Master Height Gage.
12 Inch Cadillac Style Master Height Gage.
#18 • Greenlee Gator 18V Battery Punch Set.
Greenlee Gator 18V Battery Punch Sets with (2) 18V Lithium Batteries and Charger.
#19 • Tru-Dex Wheel Dresser.
In Fitted Case.
#20 • Hiniker 112" Wide V-Plow.
Mount and Plow Only. No Controls $20 Load Fee
#21 • Mitutoyo and DoAll Micrometers.
Mitutoyo 103-224 Micrometer 9" to 10". Resolution. 0001". In Wooden Case. And DoAll 2-6" Set with .002" Resolution.
#23 • (1500) 3M R/Y+, Wire Connectors
(15) Bags of (100).
#24 • OTC Mobile Floor Crane.
Boom Length From 38" with 2000Lb. Cap. Up to 52" Fully Extended. At 1500 Lbs. Cap. 81" Max Distance Under Boom. Overall: 85" X 35" x 68". $20 Load Fee.
#25 • E.C. Simmons Keen Kutter Cutlery and Tools 5" Leg Vise.
Approx. 5"×21"×40".
#26 • Parlec Test Bar.
P50-20ZG6 Test Bar in Fitted Case.
#27 • Adjustable Angle Table.
Reid Tool Specialties Adjustable Angle Table. Approx 6" X 7.5" X 6".
#28 • Siemens PN: 6SL3120-1TE23-0AA4 Sinamics S120 Single Motor Module.
Input: DC600V, Output:3AC 400V, 30A, Seller States Unit has Been Repaired.
#29 • (6) AirLoc Wedgmounts.
Each Approx 6" X 3" X 2 to 2.4". 9000 LB Max Load.
#30 • Global Power Products Diesel Powered Generator.
with Stamford Continuous Duty 480 Volt 3-Phase Generator Powered by a 3.3 Liter Mitsubishi Model SS Diesel Engine Mfg. in 2014/12. Includes Battery, Fuel Tank, Disconnect Box and Control Box. Overall Approx. 72"×56"×41". Load Fee: $20.00
#31 • DeWalt Router with Accessories.
DeWalt DWP611 Compact Router. 120 Vac, 7 Amps. With Accessary Plunge Router Base. Plus Base Dust Adapters and Carbide Tipped Bits. In Carry Case.
#32 • 3 Jaw Chuck
9" Diameter. No Backplate.
#33 • Foredom SR With Accessories.
Foredom SR Series Flex Shaft Rotary Tool. 115 Vac, 1.7 Amp. 18000 rpm. Mounted on Plate with Drill Press Attachment plus Foot Switch and Speed Control.
#34 • Repaired X-Axis Ball Screw Assembly for Toyoda FA550
Box Approx. 57"×7"×7".
#35 • Nationwide Industries Model 1712 17 Ft. Pontoon.
Location: Cedar, MN. Capacity: 2,000 lbs, Includes 35 HP 2-Stroke Mercury Outboard, No Battery, Seller States Motor Runs, No Trailer, Seller will Help Load, Approx. 17'x97"×56". No Registration or Title Available. Preview by Appointment Only. Contact Greg at 612-325-2158 to Arrange.
#36 • (2) USA Coil & Air Model RC38JBR06001800006R Safety Thaw Condensers/Radiators.
Overall Approx. 72"×24"×3". Appear Unused.
#37 • Maudlin Slotted Shim Kit.
Tool Crib Kit.
#38 • (1500) 3M R/Y+, Wire Connectors
(15) Bags of (100).
#39 • Terex Bucket Truck Bucket.
Fits Terex T-L-41M. Overall: 30" x 31" x 43".
#40 • Raymond Model 20RT40TT Reach-Fork Truck.
Location: North Branch, MN Multi-Directional Steering, 24 Volt, Capacity: 4000 lb., Max. Height: 184", 4"x42" Forks, Indicated Hours: 6734, s/n: 020-87-26147, Approx. 44"x93"x96" and Approx. 7000 lbs. Must be removed with tilt-bed tow truck. Click 2nd Photo for Video.
#41 • Trimble Model LL300 Laser Level.
Includes No. HR300 and No. HR350 Laser Receivers, Assorted Mounts and Case.
#42 • (2) Partial Gage Block Sets, and Pilot Hole Reamers.
(1) Scherr Tumico, (1) Phase 2.
#43 • Mitutoyo No. 192-116, 12" Height Gage. And Assorted Inspection.
.001" Grad. Also Includes: (4) Mag. Base Indicator Holders, and Indi-Cal Drafting Tool.
#44 • Milwaukee Sawzall.
Catalog No. 6509-31 Sawzall Reciprocating Saw. 120 Vac 12 Amp.
#45 • Reliance Brushless Motor with Gearhead.
Reliance Electric Brushless Motor Model F-4030-Q-H00AA With Bayside Precision 10:1 Gearhead.
#46 • Greenlee Hydraulic Punch Set.
Greenlee 767 Hydraulic Punch Set. In Plastic Case.
#47 • Omron Inverter.
Model 3GEV-AB002-CUE. Input 200-240 Vac 1 Phase 2.9 Amps. Output 0-240 Volt 3 Phase 1.5 Amps.
#48 • Challenge Right Angle Blocks.
(2) Challenge 4" x 5" x 3-3/4".
#49 • Case With Carbide Inserts.
Plastic Organizer with Assorted Carbide Inserts.
#50 • Generac Item No. QT02524GNSNA Standby Generator.
25 kW (31 kVA) at 60 Hz, 2.4L Generac G-Force Natural Gas/LP Powered Engine, Engine Family: DGNXB02.42NN, Production Date: 07/23/13, Sound Enclosure, Digital Controls, s/n: 8343223, Approx. 77"×34"×46". Load Fee: $50.00
#51 • Kinney High Vacuum Pump.
Model KVC-5. 115 VAC 8.8 Amps 1/2 hp Motor.
#52 • (2) Height Stands.
Each Approx 4" X 8" X 12".
#53 • Assorted HSS Endmills.
Shanks from 3/4" to 3/8". Mostly Ball Endmills.
#54 • Assorted Drills.
Assorted Drills, Center Drills, and Other Perishable Tooling.
#55 • Seco Octomill Facemills.
(4) Seco R220.43-02.50-07W. Appears to be Unused.
#56 • Schneider Electric AC Speed Drive.
Altivar 312. ATV312H055N4. 0.75 HP. 380-500 VAC.
#57 • Greenlee Hydraulic Punch Set.
Greenlee 767 Hydraulic Punch Set in Plastic Case.
#58 • Makita 18V Hammer Drill Kit.
Makita LXRH01 Hammer Drill with (2) 18V 3.0 Ah Batteries, Charger, and DX01 Hepa Filter in Makita Carry Bag.
#59 • Dottie 12 Ton Punch with Cutters Set.
Model HPTK1. In Plastic Case.
#60 • Reynolds Machinery Model FSG 3A20 Surface Grinder.
Table Travel: Longitudinal - 21", Cross Feed - 9-1/4", Working Surface: 8"x18", Max. Distance from Spindle Center to Table Surface: 14-3/8", Includes Coolant Tank with Pump, Approx. 60"×52"×67", Load Fee: $50.00 No Rails on Trailer, Can Not Load Over Wheel Fenders.
#61 • Brown & Sharpe Riser Block.
Model 5852 10 " Riser Block.
#62 • 3/8" Carbide Endmills.
(30) Carbide Endmills. Mostly 3/8" Shanks. Some Double Ended.
#63 • (9) Insert Milling Cutters.
Shanks from 1.25" to 5/8".
#64 • Assorted Inspection Items.
Mitutoyo No. 126-137 Micrometer, and No. 126-138 Micrometer with interchangeable Anvils. Thread Gages, and More.
#65 • Milwaukee Right Angle Drill and Sawzall.
Heavy Duty Right Angle Drill and Heavy Duty Sawzall in Metal Cases.
#66 • Chain Load Binders and Metal Bin.
Sturdy Metal Bin Approx 11" X 20" X 8". With Handle on Each End. (2) Load Binders.
#67 • Large Assortment HSS Endmills
Most Shanks between 1/2" and 3/8".
#68 • AC Tech Inverters.
(2) AC Tech Inverters. Model SF220 and SF210. 208/240 Volt 3-Phase input. SF 220 has Broken Plastic Case.
#69 • Assorted Cutters.
(4) FS Tool Cutters, Assorted Carbide Insert Holders, Assorted Arbor Cutters Mostly for 1" Arbor. Plus More.
#70 • Bishamon Pneumatic Pallet Positioner.
4000 lb Rated Capacity. $20 Load Fee
#71 • Hilti Hammer Drill.
Model TE7-C. 115 Vac. 6.3 Amp.
#72 • Surge Suppressors and Extension Cords.
(2) isobar Surge Suppressor Outlet. (1) Woods Multiple Outlet, and (3) Extension Cords.
#73 • Standard Bore Gage in Wooden Case.
Standard No. 241 Bore Gage in Standard Wood Case.
#74 • Indicator Stand with Micrometer Holder.
Indicator Stand Approx 4" X 6" X 17". Chrome Plated Column.
#75 • DoAll Micro Chek.
Heavy Duty DoAll Indicator Stand. Model MC-12. Approx 8" X 13" X 22".
#76 • Arkograf Electric Engraver.
Arkograf Electric Spark Engraver. 110 VAC.
#77 • Magnetic V Blocks.
(1) Dual Sided V Block. (1) Pair Magnetic V Blocks.
#78 • SPI Angle Dresser.
Approx 3.5" X 14" X 7".
#79 • Phase II H/V Collet Holder.
5C Collet Holder.
#80 • MTS Insight Electromechanical - 30kN Extended Length Testing System.
Range of Load Capacities: 5 - 600 kN, Includes Pendant Control, Approx. 29"×20"×105". System as Shown. Load Fee: $20.00
#81 • Redline 3/4" Endmills.
(6) REH8137 Carbide Endmills 3/4" 3 Flute Square Corner Finishing Endmills. And (3) REX4191 3/4" 4 Flute Square Endmills.
#82 • Bin of Toggle Clamps.
Assorted Toggle Clamps. Some New, Some Used Plus Parts.
#83 • Precision Brand "Tru Punch" Punch & Die Set.
.
#84 • Challenge Right Angle Block.
5 X 8 X 5
#85 • Production Specialty "Prospector" Precision Lubrication Applicator.
.
#86 • Magnetek Model TU-740-2 Converter Charger.
120V DC Input, 12V. 40 Amps Total Max Output. Overall: 6" x 12" x 8".
#87 • Paslode Impulse 16 Ga. Cordless Nailer.
Includes Battery, Charger, and Case.
#88 • Starrett Dial Indicator.
Starrett No. 656 Dial Indicator. 0-1" Travel. Reading 0-100. Graduated 0.001". Dial is 3.5" Diameter. In Starrett Box.
#89 • (2) Terex H.R. Series Bucket Truck Baskets.
Each Measures: 37" X 29" x 42".
#90 • Retrofitted Hardinge Lathe with Pokeys CNC57 Board.
Runs on Mach 4 Software, Includes Vevor H100-7.5S2-C0 VFD Inverter, Dunham Pneumatic Collet Chuck, Missing Monitor, Computer and E-Stop, 220 Volt, 3-Phase, Approx. 76"×31"×60". Load Fee: $50.00
#91 • Digital Caliper and Micrometers.
Mitutoyo 4" Digimatic Caliper in Plastic Case. And Vinca 1" Digital Micrometer and Mitutoyo Digital 1" to 2" Micrometer in Plastic Cases.
#92 • Assorted Roughing Endmills.
3/8" , 1/2" , and 3/4" Shanks.
#93 • 1000 Lb. Cap. Mobile Engine Crane.
2-Way Hydraulic Valve. 43" Max Reach. 60" Max Under Arm. 68" x 31-1/2" x 58". $20 Load Fee.
#94 • Reliance Servo Motors.
(3) Model F-4030-Q-H00AA Servo Motors.
#95 • Makita Circular Saw and Milwaukee Sawzall.
Makita Model 5007NB 7-1/4" Circular Saw115 Vac 13 Amp. Milwaukee Heavy Duty Sawzall Cat No. 6509-831. 120 Vac 12 Amp. Both in Plastic Cases..
#96 • Wheel Dresser Fixture.
Approx 6" X 8" X 8".
#97 • Assorted Taps and Dies.
See Photos.
#98 • Corner Rounding and T Slot Cutters.
(11) Corner Rounding Endmills, (12) T Slot Cutters.
#99 • Set Of Ball V Blocks.
Rupert Ball Block Set. And V Block Fixture.
#100 • Acco Press Model P994 Cat. No. MHP-60 Manuel 60 Ton H-Frame Hydraulic Press.
Traveling Cylinder, Safety Fence on Both Sides, On Casters, 45" Between Frames, Bed is 14-1/2" Wide, Overall Approx. 68"×37"×84". Load Fee: $20.00
#101 • SPI Cylindrical Square.
Approx 3-3/16" Diameter 6" Tall. In Fitted Case.
#102 • Assorted Carbide Endmills.
(15) Assorted Carbide 3/4" Endmills.
#103 • Radius and Angle Dresser.
Radius and Angle Dresser in Case.
#104 • (3) Dial Indicators.
Mitutoyo No. 2923-10 Jeweled .0001" Resolution. 050" Travel.Teclock .0001" Resolution .050" Travel and Unmarked .001" Resolution 1" Travel.
#105 • Dayton Model 4W622 Hardwood Platform Cart.
Weight Capacity: 2,000 lbs., Approx. 23" Wide, 49" Long. 9" High.
#106 • Assorted Lathe Tools.
(3) With 3/4" Shanks.
#107 • Assorted Facemills.
(4) With 3/4" Arbor Holes, (1) With 1" Hole, (1) With 1.25" Shank, and (1) With 3/4" Shank.
#108 • Assorted Reamers.
See Photos.
#109 • Assorted HSS Endmills
Shanks from 1" to 5/8".
#110 • The New York Blower Company Shop Number F03609 100, Series 20 GI Fan.
Wheel Size & Type: 174 LS, 1350 CFM, 15 SP, 3075 RPM, 6 BPH, Allen-Bradley PowerFlex 400, Setup with 10" Intake and 6" Output, On Metal Cart w 8" Diameter Casters, 480 Volt, 3-Phase, Approx. 57"×31"×58". Load Fee: $20.00
#111 • Assorted Electrical Equipment.
See Photos.
#112 • Large Centers.
Assorted Large Live Centers. Some marked #5.
#113 • Makita 18 Volt Hammer Drill Kit.
Makita XRH01 18 Volt Hammer Drill Kit with (2) 18 Volt 3.0 Ah Batteries, Charger and Hepa Filter in Makita Carry Bag.
#114 • (2) Brother P Touch Label Makers.
(2) Brother P Touch Label Makers. (1) has AC Adapter and the other seems to have Spare Batteries. No Label Tape.
#115 • Assorted Hand Held Radios Plus More
Assorted Hand Held 2- Way Radios with Assorted Mics and Chargers. In Pelican Case Approx 15" X 18" X8".
#116 • (2) Greenlee Hydraulic Punch Sets.
(2) Greenlee 767 Knockout Punch Sets. In Metal Carry Case.
#117 • Milwaukee Sawzall and More.
Milwaukee Sawzall Cat No. 6509-22. 120 Vac 12 Amp. Ryobi Speed SawModel SS50. 120 Vav 5.0 Amp in Plastic Case with Accessories. Plus Wire Wrap Tool and Soldering Iron.
#118 • DeWalt 18V Hammer Drill plus Ramset Tool.l.
DeWalt Model DC212 Cordless 18V Hammer Drill with (1) 18V XRP Battery and Charger. With Ramset Tool Kit.
#119 • Bosch Hammer Drill.
Bulldog 11224VSR Hammer Drill in Carry Case. 115 Vac 6.9 Amp.
#120 • (2) Aronson Model HS2VA-2 Welding Positioners - Headstock and Tailstock.
Location: North Branch (Sunrise), MN. On a Track, 24" 3-Jaw Chuck with 56" Diameter Faceplates, Maximum Capacity Each: 2,500 lbs, Maximum Rotational Torque: 30,000 lb/In., Condition Unknow, Overall Each Approx. 56"x55"x90", Track is Approx.115" Long. Seller will Load for No Charge. Preview by Appointment Only. Contact Greg at 612-325-2158 to Arrange.
#121 • Dremel Kit.
Dremel 300 in Carry Case with Accessories.
#122 • Assorted HSS Endmills.
Shanks from 1.25" to 3/4".
#123 • Challenge Right Angle Plate.
Challenge 6 X 6 X 8 Right Angle Plate.
#124 • AC Tech Inverter.
Model M1420B. Input: 400/480 Volt, 3-Phase, 4.1 Amp. Output: 0-400 Volt, 3-Phase, 3.4 Amp, 0-120 Hz.
#125 • Electrical Items.
Techno-Isel Controller Box Approx 16" X 18" X 8". Hobart Scale. Doesn't seem to Work. Small Electrical Box Approx 7" X 8" X 4.5".
#126 • Right Angle Blocks.
(1) Approx 4" X 5" X 6". (2) Approx 3.5" X 5" X 4".
#127 • 5C Collet Holder.
Approx 6" X 7" X 4".
#128 • Assorted HSS Drills.
Sizes From 5/16" to 1/2".
#129 • Assorted Boring Bars.
Some HSS. Some Insert.
#130 • Presto Eco4 Pneumatic Pallet Positioner
43-1/2" Table Diameter $20 Load Fee
#131 • Welch Duo Seal Vacuum Pump.
Model R-1405. 1/3 HP 115 VAC 3.4 Amps.
#132 • Assorted HSS Endmills.
Shanks from 1/2" to 1-1/4".
#133 • Assorted Shop Equipment.
greasing tools, Large Drill Bits, Vise Swivel Base, Assorted Allen Wrenches and Black & Decker 1/2" Drill. 115 Vac 3.5 Amps 400rpm.
#134 • Large Grinding Wheel Adapter Plus More.
Large Grinding Wheel Adapter, Lathe Micrometer Stop, and Dividing Wheels.
#135 • Harig Duo-Form Wheel Dresser.
Approx 4" X 13" X 6".
#136 • Lathe Tool Holders and More.
Tool Holders, Center Parts, and Chuck Jaws.
#137 • Tool Boxes and More.
(2) Red Tool Boxes with Assorted Hand Tools. (3) Quick Box Battery Boxes.
#138 • Shop Made Fixtures.
Parallels Approx 1" X 10" X 4.5". Aluminum Angle Approx 5.5" X 6" X 5". Steel Fixture Approx 7" X 7" X 8".
#139 • HSS Endmills.
Shanks 5/8" and 3/4".
#140 • Southworth PP360-R4 Pallet Positioner.
43-1/2" Table Diameter. $20 Load Fee
#141 • Right Angle Blocks.
(1) Approx 4 X 5 X 6 with Tapped Holes. (1) Approx 4 X 4 X 6.
#142 • Demagnetizer.
115 VAC 3.5 Amps. Approx 5.5" X 8" X 5". Cord needs to be Replaced.
#143 • Assortment of Countersinks.
#144 • Assorted HSS Reamers.
#145 • 5C Spin Indexer Jig.
#146 • Assortment Of Ejector Pins.
#147 • Cylindrical Square.
Approx 3" Diameter x 6" High.
#148 • 5C Spin Indexers.
(2) 5C Spin Indexers.
#149 • Guhring 3/4" Endmills.
(9) Coated 4 Flute Carbide Endmills. 3/4 X 3/4" X 1-1/2"X 4" R.031.
#150 • (2) Indiana Scalw Co. No. 10-081 48"×48" Pallet Scales with (4) Scales Model LP7510A Controls.
Capacity: 5,ooo lbs, Only (1) Power Cord, Condition Unknown. Load Fee:$20.00
#151 • Milwaukee Heavy Duty Sawzall.
Cat No. 6509. 120 VAC 11 Amps.
#152 • Makita 18 Volt Hammer Drill.
Makita XRH01 Hammer Drill with (2) 18V 3.0 AH Batteries, Charger, DX01 Hepa Filter and Makita Carry Bag.
#153 • DeWalt Cordless Drills.
DeWalt Cordless DCD951 Drill with 18V Battery and Charger. Plus DeWalt Cordless DC212 Hammer Drill with 18V Battery but No Charger.
#154 • Greenlee Hydraulic Punch Set.
Greenlee 767 Hydraulic Punch Set. In Plastic Case.
#155 • Fluke Networks Link Runner.
Fluke Networks Link Runner. With Other Fluke parts which may be related. Brady TLS2200 Labeling System.
#156 • (18) Plastic Bins.
Each Approx 4" X 17" X 4".
#157 • Makita Cordless Reciprocating Saw.
Model XRJ03 18V with Li-ion Battery and Charger.
#158 • Williams Decimal Equivalents Metal Sign.
17" x 25".
#159 • Paslode Impulse 16 Ga. Cordless Nailer.
Includes Battery, Charger, and Case.
#160 • Southworth PP360 Pneumatic Pallet Positioner.
43-1/2" Table Diameter. $20 Load Fee
#161 • Bosch Jigsaw and Hammer Drill.
Bosch JS260 120 Vac 6 Amp Variable Speed Jigsaw. And Bulldog 11224VSR Hammer Drill 120 Vac 6.9 Amps.
#162 • AMMCO Clamps, Spring Compresser and Scale.
(2) Model 2670 Auto Wheel Clamps. Sunnen Valve Spring Compresser, and Edlund Spring Scale.
#163 • Linear Motion Parts.
Stelron Slide Assembly. Approx 5" X 18" X 4". 5 Inches of Travel. Round Rail Approx 5/8" Diameter 24" Long. 3 Bal Bearing Slides.
#164 • DeWalt 1/2" Drill with Assorted Bits.
DeWalt DW235G Variable Speed Drill. O-1000 rpm 120 Vac 8.5 Amp. With Assorted Drill Bits. In Milwaukee Steel Case.
#165 • Foredom Model SR
115 Vac 1.7 Amp. With Broken Drive Shaft Housing.
#166 • Linear Cross Slide and Vertical.
Approx Y travel 20 inch. Z travel 5 inch. Ball Screws with Linear Rails. Overall Approx 14" X 30" X 25" High.
#167 • (2) 3 Phase Electric Motors.
Reliance Electric 1 Hp 3 Phase 208/440 Vac. Hawker Siddeley 2.0 Hp 230/460 Vac with BEI Encoder.
#168 • Assorted Boring Bars.
Some Carbide Tipped.
#169 • 1-2" Indicating Micrometer.
See Photos.
#170 • Fairbanks Scales Model 5LF-R3400 Pallet Scale with Model 420 Plus Control.
48"×48", Capacity: 5,000 lbs, Load Fee: $20.00
#171 • Assorted Electrical Boxes.
See Photos.
#172 • DeWalt Cordless 18V Drills.
DeWalt DCD940 Cordless Drill Kit with 18V Battery and Charger. Plus and extra DCD940 Drill with Battery and Charger.
#173 • (20) Asus External Slim DVD-ROM.
Model SDR-08B1.
#174 • Assorted Test Equipment.
Sencor TF 166 Transistor Tester. Sencor CR 143 CRT Tester. BK Precision 667 Solid State Tube Tester.
#175 • Assorted Cables and Noise Filters.
(1) SlimRun USB 3.1 Type C to HDMI Video Cables. (1) Tripp-Lite Model P568-40M-FBR. (7) Okaya Noise Filters. And (2) Cable Assemblies.
#176 • Makita 18V Hammer Drill Kit.
Makita XRH01 Hammer Drill with (2) 18V 3.0 Ah Batteries, with Charger and DX01 Hepa Filter in Makita Carry Bag.
#177 • DeWalt Cordless Drills.
(3) DeWalt 18V Cordless DCD940 Drills with (3) Batteries and (3) Chargers with (2) Plastic Cases.
#178 • Air Cooled Spindle Motor.
Air Cooled Spindle Motor with ER20 Collet Holder. 220V 300 Hz 18000 rpm 3 Kw 8.6 Amps.
#179 • Toledo Model 2181 Platform Scale.
24" x 30" Platform, 24" Diameter Dial, On Casters, Load Fee: $20.00
#180 • Presto Eco4 Pneumatic Pallet Positioner
43-1/2" Table Diameter $20 Load Fee
#181 • Milwaukee Sawzall and Bosch Hammer Drill.
Milwaukee Sawzall Cat No. 6535. 120 Vac 10 Amps in Metal Case. Bosch Hammer Drill Model 11232EVS. 115 Vac 8.8 Amps. In Metal Case.
#182 • Tote Of Tubing.
Large Assortment of Tubing. Vinyl, Nylon, Polyethylene and Rubber. Tote is Approx 20" X 28" X 15".
#183 • (8) 6" Height Swivel Casters with Wheel Position Locks.
.
#184 • Linear Scale with Parts.
WTB5-0950MM Linear Scale. Approx 30 inch Travel. With Arm Parts for mounting DRO Box.
#185 • Schneider Inverter Drive.
Model ATV12H037M2. Input 200-240 Vac Single Phase 5.9 Amps. Output 400 Hz, 2.4 Amps.
#186 • Automotive Analyzers.
NRI Automotive Tester and Penske Model 244.21032 Automotive Analyzer.
#187 • (2) Reliance Electric Brushless Motors.
Reliance Electric Model F-4030-Q-H01AA Brushless Motors.
#188 • DeWalt DW006 Hammer Drill.
DeWalt DW006 24 Volt Cordless Hammer Drill Kit with (2) 24 Volt Batteries and Charger. Plus Makita XRH01 Hammer Drill with Charger but NO BATTERIES. Plus DeWalt DC980 Cordless Drill, NO BATTERY OR CHARGER.
#189 • Assorted HSS Endmills.
Shanks mostly 1" to 1.25".
#190 • Jet Model COM-16 Abrasive Cutoff Saw.
5 HP, 230 Volt, 3-Phase, Approx. 20"×36"×23". Load Fee: $20.00. Last Day Removal Only.
#191 • Assorted Motor Speed Controls
Assorted Electrical Motor Speed Controls.
#192 • KDK Toolpost Turret.
Small Turret to fit KDK Quick Change Tool Post.
#193 • (2) Small Threading Die Heads.
Not Marked. Smallest 2.5" Diameter. Other is 3" Diameter. Plus Assorted Dies.
#194 • 5C Collets Plus H/V Holder.
(22) Assorted 5C Collets with Drawbar and Horizontal/ Vertical Collet Holder.
#195 • Central Machinery 6" Tool Grinder.
Item: 46727, 1/2 HP, Adjustable Angle Worktablea, 115V. 6.3 Amp. Overall: 24" x 12" x 19".
#196 • Greenlee Hydraulic Punch Sets.
(2) Greenlee 767 Hydraulic Punch Sets. (1) in Plastic Case, (1) in Metal Case.
#197 • Williams Decimal Equivalents Metal Sign.
17" x 25".
#198 • Kurt Model D675 Precision Machine Vise.
No Handle, Approx. 9"×19"×4-1/2".
#199 • Large Spur Gear, Approx. 25" Diameter x 4".
Hub is 7" Diameter x 7", Approx. 206 lbs. Load Fee: $20.00. Last Day Removal Only.
#200 • Grob Model 4V-18 Vertical Bandsaw with cutting tool Welder.
24" x 28" Adjustable Angle Table, Grob Type RW-B cutting tool Welder, Shear, and Grinder. 2-Speeds High and Low Range From 40-120 FPM, Up to 1665-5000 FPM. 9" Max Distance to Table Under cutting tool Guide. 18" Throat, S/N: 2089, 240V. 3 Ph. Overall: 46" x 43" x 75". $50 Load Fee
#201 • (2) Micrometers.
Mitutoyo 103-220 Micrometer 5"-6". .0001" Resolution. Micrometer 8" - 9". .0001" Resolution. Made in Poland.
#202 • Assorted Tooling.
Including Import Type Digital Hright Gage, and (2) NMTB 40 Taper Tool Holders. (1) TG100 Type with Collets, and (1) Shell Mill Type.
#203 • Kernco Refractometer
.
#204 • Dozens of Small Parts Organizers with Dividers.
Mostly: 6-1/2" x 18" x 4".
#205 • Assorted 115 VAC Hand Tools.
1/2" Drill 550 rpm. 3/8" Skil Model 6225Variable Speed Hand Drill. 3 Amps.Skil Professional Drywall Screwdrivers. 5 Amps 0-4000 rpm. Dremel Moto-Tool. Model 260 Series. 0.5 Amps. Mini Carvin and Drill. 115 vac .26 Amps.
#206 • Mustee Model 27W, Wall Mounted Double Basin Laundry Sink
24" x 40".
#207 • Simco Aerostat PC Ionizing Air Blower.
Overall: 7" x 3-1/2" x 10". 120V.
#208 • (15) New Peter Paul Series 70, Model 71, Solenoid Valves.
See Photos for Part Specifics.
#209 • Depth Micrometer and Inside Micrometer.
Brown & Sharpe Depth Micrometer Set and Mitutoyo 145-194 Inside Micrometer 1" to 2". .001" Resolution.
#210 • American-Lincoln SC7740 Model 505-313 LP Powered Sweeper/Scrubber
Click "Documents" Tab for Operators Manual and Complete Specifications, Indicated Hours: 323, Cleaning Path: Scrubbing - 40", Sweeping - 46", 60 Gallon Solution Tank, 78 Gallon Recovery Tank, s/n: 691017, Approx. 90"x47"x59". Click 2nd Photo for Video.
#211 • Burke Horizontal Mill.
Small Burke No. 3 Horizontal Milling Machine. Overall Approx 14" X 21" X 28" High. Travels: X-5", Y-3", Y- 4". Inside Spindle believed to be #9 Brown & Sharpe.
#212 • Assorted HSS Endmills.
Shanks 1.25" and 1.0".
#213 • Assorted Large Reamers and Drills.
See Photos.
#214 • Assorted Automation Components.
Including (5) SMC Pneumatic Cylinders (some Powered) and (4) Small Servo Motors.
#216 • Mitutoyo Bore Gage and Starrett Depth Gage.
Mitutoyo 511-164 Bore Gage in Plastic Case. Starrett 448 Vernier Depth Gage in Starrett Black Case.
#217 • Levitronix Pump and Assorted Breakers.
Levitronix Bearingless Pump System BPS-2000. And a box of Breakers and Contactors.
#218 • Toledo Model 2081 Platform Scale.
Capacity: 300 lbs., Scale goes to 250 lbs., on Metal Cart, Approx. 25"×30"×69". Load Fee: $20.00
#219 • T-Slotted Table, Approx. 42"×42"×5-1/4".
Approx. 2,252 lbs. Including Pallet. Load Fee: $20.00. Last Day Removal Only.
#220 • WT Model 3035-0015 10" Table Saw/Router with (2) Extensions and on Metal Frame Cart.
Includes Mitre Gauge and Extra cutting tool, Approx. 63"×40"×34-1/2", Load Fee: $20.00
#221 • Chuck And Custom Back Plates.
Skinner 3 Jaw Chuck Approx 8" Diameter. Custom Back Plates Approx 6.5" and 6" Diam.
#222 • Assorted Small Electric Motors.
(2) FASCO Model 71623198 Motors. 115/230 Vac 1.7/0.85 Amps. Graco Type 33A5BEPM-WX3. 12 Vdc, 16 Amps Gear Motor. 56 rpm. And a Midest Motion Products 90 Vdc 2 Amp Gearmotor. 85 rpm.
#223 • Lathe Dogs and More.
(8) Lathe Dogs. Steady Rest. Some Gears and More.
#224 • Adjustable Angle Magnetic Chuck.
Made in West Germany. Trunions on Both Ends. Chuck Size 4" X 8". Overall Approx 7" X 15" X 5".
#225 • Machine World Model CCD-19, 19mm Drill Press.
15" Diameter Tilting/Slotted Table, 5" Quill Travel, Throat: 8", 5/8" Capacity Chuck, Belted Speeds: 153 to 4163,115 Volt, Approx. 16"×30"×61". Load Fee: $20.00
#226 • Coolant Tank.
Approx 10" X 27" X 13".
#227 • 2-Door Metal Cabinet with Wo8d Top and Key.
Approx. 36"×19"×39", Also Includes Sentinel Cabinet with Key, Approx. 17"×10"×15-1/2". Last Day Removal Only.
#228 • Large Spur Gear, Approx. 25" Diameter x 4".
Hub is 7" Diameter x 7", Approx. 196 lbs. Load Fee: $20.00. Last Day Removal Only.
#229 • (2) 10-Drawer Metal Cabinets.
Drawers Approx. 16-1/2"×3", Overall Approx. 19"×25"×47". Load Fee: $20.00. Last Day Removal Only.
#230 • Global Power Products Diesel Powered Generator.
with Stamford Continuous Duty 480 Volt 3-Phase Generator Powered by a 3.3 Liter Mitsubishi Model SS Diesel Engine Mfg. in 2014/12. Approx. 76"×25"×41". Load Fee: $20.00
#231 • Assorted New Electrical Enclosure Compinenta.
.
#232 • Speed Rack Style Pallet Racking.
Consisting of (2) 120" x 32" Uprights, and (4) 99" x 3" Cross Members. Speed Rack Style Clips Included. Last Checkout Day Removal Only.
#233 • (2) New Sony FS-75 Machine Foot Control Units.
.
#234 • (4) IBC Tote Frames.
$20 Load Fee
#235 • VEM 3Ph. Electric Motor.
Approx. 3/4" Keyed Output Shaft. See Motor ID Plaque for Details.
#236 • Structural Concepts Oasis Model: CO57R Refrigerated Display Case.
Includes: (3) Lights and (3) Shelves. Approx. 60" x 36" x 79" and Approx. 1,350 lbs. Load Free $20.00.
#237 • Fims 3-Sided Piston Type Tool Post with (4) Holders.
Tool Post Measures: 4-1/4" X 4-1/2" x x 3-1/2" Height. Holder Numbers Include: (2) 4-A, 4B, and 4-E.
#238 • Gage Block Set.
In Wooden Case.
#239 • Lapmaster Monochromatic Light with Wood Enclosure.
120V. 9-1/2" x 6" Light. Overall When Case Closed. 10-1/2" x 7-1/2" x 7".
#240 • Wilton Model 8201 14" Tradesman Bandsaw.
Capacity: 6" Under Guide, cutting tool to Frame: 13.5", Cutting Speeds: Wood - 3300 SFPM, Metal - 39, 57, 78, 107, 142, 196 and 278 SFPM, Table Tilt to Right: 45°, Table Tilt to Left: 10°, cutting tool: 3/8"x0.025"x92.5", (3) Extra cutting tool Included, Cart Included, Manual Included, 115 Volt, Approx. 20"x16"x70". Load Fee: $20.00
#241 • Large Centers.
Large Centers. (1) is Skoda Model 5CNS243324.
#242 • Cushman #3506, 6" 3-Jaw Chuck.
Threaded Back Plate. Recess Approx 1.94".
#243 • Inductor Inc. Dyno Control.
Model: CD-1211-23. 1-5/8" Keyed Output Shaft. Max Ratings: 50 HP, 150 Ft. LBS. 3600 RPM. Overall: 16" x 24" x 19".
#244 • (2) Altec "Digger" Bucket Truck Man Baskets.
(1) with Poly Liner. (1) with Basket Extension Bracket.
#245 • Spraymation Thermopulse 3900 Series Adhesive System.
Also Includes Microtemp Pump Control and Melter. Approx. 38"×38"×64". Load Fee: $20.00
#246 • Campbell Hausfeld 2 Gallon Air Compressor.
120V. Overall: 16" X 8" x 15".
#247 • Assorted HSS Endmills.
Shanks from 3/8" to 3/4".
#248 • 6-1/2" x 18" x 4" Small Parts Containers with Dividers.
.
#249 • Mitutoyo 6" - 7" Micrometer.
Mitutoyo No. 103-221A Micrometer. 6-7" Range.Carbide Anvils. .0001" Resolution. In Starrett Box.
#250 • Boss 8' Super Duty Plow.
cutting tool and Mount Only. No Controls $20 Load Fee
#251 • (2) Magnetic Base Indicator Stands.
.
#252 • 10' Roller Chain.
RS 40 RIV.
#253 • (6) Sets of Small Lathe Jaws.
Various Sizes as Shown. See Tape Measure for Relative Scale Size.
#254 • (17) Clear Acrylic Saw Pushers.
.
#255 • Laramie Products Plastic Welder.
With Case.
#256 • Tripp Lite, 1000 Watt DC to AC Inverter.
Model PV-1000 FC
#257 • Performax 120V. Orbital Saw.
.
#258 • Toledo Model 2181 Platform Scale.
24" x 30" Platform with Compressed Bottle Holder, 24" Diameter Dial, On Casters, Appears to Need Repair. Load Fee: $20.00
#259 • Pallet of Assorted Press Brake Tooling.
Includes Gooseneck and Straight, From 2" to 53" Lengths. Load Fee: $20.00. Last Day Removal Only.
#260 • Pilgrim SMT-200, Vertical Milling Machine.
9" x 42" T-Slotted Table, R8 Spindle, (8) Belted Speeds from 80-2720 RPM, R8 Collet Set and Hold Down Set, 3-Phase, s/n: 79255, Approx. 58" x 64" x 84". $100 Load Fee
#261 • (2) 3 Jaw Chucks.
5 Inch Whiton Chuck Recess Approx 2.19" and 4 Inch Phase II Recess Approx 2.29". Both Backs are Threaded.
#262 • Large Spur Gear, Approx. 15-1/2" Diameter x 4".
Hub is 8" Diameter x 6", Approx. 193 lbs. Load Fee: $20.00. Last Day Removal Only.
#263 • (2) Hoist Trolleys.
(1) Columbus and McKinnon Series 635 1 Ton. Paint Obscures Tag on Second Trolley.
#264 • Kurt D40-4 Swivel Plate
Other Swivel Plate and More.
#265 • Graphite Electrode Blanks.
(16) Blanks Approx. 7.22" X 3.35" X 0.50". Seller Believes Graphite to be +50 Grade by Mersen, Comparable to Poco EDM-2.
#266 • Assorted Taper Tooling and More.
See Photos.
#267 • Omega Temp Scan Plus More.
Omega TempScan 1100 High Speed Temperature Measurement System. (2) SMBus Moniors in Klein Tool Bags. PanaVise Circuit Boards Holder with Vise Base. Assorted Bushings and Hardware.
#268 • (12) R8 Collets.
Sizes Range From 3/16 to 3/4.
#269 • (3) Sander Polishers.
Milwaukee Cat No. 6060 Heavy Duty Sander Grinder. 9" Disk. 115 Vac 11.5 Amps. Dayton 7" Production Sander. 115 Vac 12 Amps. Sears Craftman Sander Polisher. Two Speed. 115 Vac 8.6 Amps.
#270 • Crown Model RC3020-40, Electric Stand Up 3300 Lb. Cap. Forklift.
208" Max Lift, 36V. Type EO Battery, Side Shift and Tilt, 42" x 4" Forks on 16" Carriage. 6882 Hours. Overall Truck Dimensions 43" x 69" x 90" Not Including Forks. Total Truck Weight with Battery: 9796 Lbs. Seller States Battery Replaced Approx 4 Years Ago and Hold Charge Well.
#271 • Heavy Duty Shop Made Single Sided Cantilever Rack.
Location: North Branch (Sunrise), MN. Uprights are Approx. 7"×5"×120" Tubing, Arms are 5"×2"×3/16"x58" Tubing, Overall Approx. 67"×94"×120". Seller will Load for No Charge. Preview by Appointment Only. Contact Greg at 612-325-2158 to Arrange.
#272 • Starrett 7" to 8" Micrometer.
Starrett No. 436 Micrometers in Starrett Box. Carbide Anvils. Resolution .0001".
#273 • DeWalt Inspection Camera Kit.
DCT410S1 Inspection Camera. With 12 Volt Battery Charger. NO Battery.
#274 • Servo Motors, Gearbox, Lens.
(2) Emoteq Brushless Servo Motors, Yaskawa AC Servo Motor 200 Volt 0.91 Amps 100 Watts. (3) Melles Griot Invarigon P/N59 LGR 614 Lens. And More.
#275 • Proxxon Thermocut.
Proxxon Thermocut Hot Wire Foam Cutter. 115 Vac. 20 Watts.
#276 • Eastwood Vibratory Polisher.
12 Lbs Capacity. With Polishing Media and More.
#277 • Assortment of Parts, Tooling and More.
.
#278 • (2) Linear Rails with (2) Slides.
Rails Approx. 1-3/8"×1-1/8"×91", Slides Approx. 2-3/4"x4-1/2".
#279 • Speed Rack Style Pallet Racking.
Including (4) 132" x 32" Uprights, and (12) 96" x 5" Cross Members. Speed Rack Clips and Bolts Included. Last Checkout Day Removal Only
#280 • Kanawha Scales Model 4x4 KS540-5K 48"×48" Pallet Scale with Model 420 Plus Control.
Includes Manual. Load Fee: $20.00
#281 • True Double Door/Flip Top Salad Bar Refrigerator.
Model: TSSU-60-24M-B-ST-HC, Flip Up Top with Dividers as Shown. R290 Refrigerant, 115V. S/N: 9473941, Overall: 60-1/2" x 34" x 47". $20 Load Fee.
#282 • Power Boy Mfg./Advance, Cast Railroad Box Car Mover.
Also Includes Steel 51" Toe Bar.
#283 • (2) Right Angle Gear Reduction Units.
(1) Boston Gear Cat. NO. 318-30-G1, (1) Eberhardt-Denver Size 21LB, 66/1 Ratio with Double Sided Output.
#284 • (3) Trailer Hitches.
(1) Reese Towpower 5000 Lb. Trailer Weight, (1) Curt Mfg. 6000 Lb. Trailer Weight, (1) Draw-Tite, 10000 Lb. Max Trailer Weight.
#285 • Yale 1 Ton Electric Hoist with Trolley.
No Mfg. Plate, Pendant Control, 208 Volt, 3-Phase, Approx. 32"×12"×18". Load Fee: $20.00. Last Day Removal Only.
#286 • Brown & Sharpe Bench Micrometer.
0-1" Bench Micrometer in Fitted Wooden Case.
#287 • Fowler z-Check 65 Plus Z-Axis Tool Setter.
Large Display. In Fitted Metal Case With Zero Setting Reference Block.
#288 • Scherr Tumico Vernier Height Gage.
0 to 96 Millimeters Range. 1/50 Millimeter Resolution. Approx 43 " Tall.
#289 • Buck #1308, 8" 4-Jaw Chuck.
Made in USA. No Backplate or Key.
#290 • Bishamon Pneumatic Pallet Positioner.
4000 lb Rated Capacity. $20 Load Fee
#291 • Starrett No. 224 Micrometer.
Set D. Range 12" to 16". With (4) Interchangeable AnvilsAnd set of Standards 12", 13", 14", and 15". In Fitted Wooden Starrett Case.
#292 • 2-4-6 Block Pair.
With Tapped and Untapped Holes.
#293 • Assorted Measuring and Drafting Tools.
Antique 72" Craftsman Folding Rule No. 3935 made from Aluminum. Assorted Drafting Rulers and Calipers.
#294 • Assorted Inspection
O-Vee Thread Gage Set. Missing gage marked 20. 4" Lufkin Square. Assorted Rules and More.
#295 • Collins Microflat Granite Surface Plate.
Overall: 24" x 18" x 3". S/N: 66524. No Noticeable Surface or Edge Chips. $20 Load Fee.
#296 • Continental Hydraulic Crimp Dies and More.
Orange 41 mm, Yellow 23 mm,Black 50 mm, Green 19 mm, Blue, Brown 27 mm,Silver 31mm. Plus Boxes marked Top Compression Ring, Base Pressure Plate.
#297 • Assorted Gages.
DoAll Trans Chek Model TC 510. Boice Bore Gage and Scherr Tumico Jeweled Dial Indicator 0.0001" Resolution. .
#298 • Assorted Electrical and MRO Components.
See All Photos for Details.
#299 • 90 Degree Knee Block.
Approx 4" X 4" X 6". Holes seem to line up with 2X4X6 blocks in Lot 292.
#300 • Presto Eco4 Pneumatic Pallet Positioner
43-1/2" Table Diameter $20 Load Fee
#301 • Toledo Model 2081 Platform Scale.
Capacity: 300 lbs., Scale goes to 250 lbs., on Metal Cart, Approx. 25"×30"×69". Load Fee: $20.00
#302 • 8" 4-Jaw Chuck.
No Backplate. No Key.
#303 • V Belt Pulleys and More.
(3) Assorted V Belt Pulleys and Other Round Metal Parts.
#304 • Heavy Duty Shop Made Single Sided Cantilever Rack.
Location: North Branch (Sunrise), MN. Uprights are Approx. 8"×12"×1/2"x130" I-Beams, Arms are 4-1/2"×1-1/2"×48" C-Channel, Overall Approx. 57"×90"×130". Seller will Load for No Charge. Preview by Appointment Only. Contact Greg at 612-325-2158 to Arrange.
#305 • Greenlee No. 6001 Super Tugger Cable Puller.
Maximum Pulling Capacity of 6,500 lbs., No Force Gauge, Approx. 23"×28"×17". Last Day Removal Only.
#306 • ABB Model ACH580, HVAC Variable Frequency Drive.
See Photos for Specific Product Details. Relisted from May MTM Due to Bad Bidder.
#307 • Metal Framed Stand and Electrical Cabinet.
Stand Measures 20" x 17" x 34".
#308 • Assorted Electrical and Electronic Items.
Relisted from May MTM Due to Bad Bidder.
#309 • (12) Galvanized Steel X-Style Ground Stakes and 16" Rack Clamp.
.
#310 • Hannan Model 620H, Hydraulic Die Cutting Machine.
27" x 19-1/2" Cutting Area, 220 Volt, 3-Phase, s/n: 5562, Approx. 38" x 50" x 46" Overall and 2,570 lbs. $20 Load Fee
#311 • Metal Frame Table with Wood Top.
72"×36"×34", Top is 1-3/4" Thick.
#312 • (2) Uline Steel Carton Stands.
20" Dividers, Approx. 42"x18"x23", Capacity: 500 lbs.
#313 • 5 HP Hydraulic Power Unit with (2) Chief Hydraulic Cylinders.
Cylinders are 3,000 PSI, Bore: 2.5", Stroke: 24", Rod Diameter: 1.5", Foot Pedal Control, Tank Approx. 13"×12"×10", 220/460 Volt, 3-Phase. Last Day Removal Only.
#314 • Unknown Quantity of Tip Out Bin Cabinets.
4 & 5 Bin Cabinets, Approx. 24" Long. Crate is Approx. 51"×40"×62". Load Fee: $20.00
#315 • Hoshizaki Model: CR2S-FS Commercial Series Refrigerator on Casters.
Control Set Point Range: 33°F to 52°F, 115 Volt, Approx. 55" x 33" x 80". Click "Documents" Tab for Specification Sheet. Load Fee $20.00.
#316 • Fire Rated 4-Drawer Filing Cabinet with Key.
Approx. 17"×30"×54". Load Fee: $20.00. Last Day Removal Only.
#317 • Assorted Servo and Stepper Motors, and More.
.
#318 • Job Box on Casters.
Approx. 48"×24"×32". Last Day Removal Only. Load Fee $20.00
#319 • Tailstock with Approx. 5-1/4" to Center.
Base is 3-1/2"W x 6-1/2"L. Overall Approx. 9"×6"×7".
#320 • Di-Acro #1, 24" Press Brake
Retrofitted with Pneumatic Operation, Manual Back Gage, Approx. 28"×26"×52". Load Fee: $20.00
#321 • Kurt Model DL600B 6" Precision Double Lock Vise.
No Handle, Approx. 6"×24"×4-3/4" and 80 lbs.
#322 • Grizzly Universal Bender.
.
#323 • Honeywell Model 2096Lb, Fingerprint Safe.
Appears in Original Box. Fingerprint Opening. External Dimensions: 17-3/4" x 23-1/4" x 24". $20 Load Fee.
#324 • (2) Control Techniques Commander SE,
Includes: (2) Manuals. Appears to be New in Box.
#325 • Hobart Vulcan Commercial Model EV24S-4FP208 Electric Range with (4) 9-1/2" Cast Hot Plates.
Oven Range: 200°F - 500°F, On Casters, 208 Volt, 3-Phase, Approx. 24" x 34" x 49". Load Fee $20.00.
#326 • (3) Pump Motors.
(1) Gast 1/4 HP Vacuum Pump, (1) Carbonator 1/3 HP Pump Motor with Pump, and (1) Emerson Motor Missing Pump Assembly..
#327 • 3 Jaw Chuck 8" Diameter.
3 Jaw Chuck 8" Diameter with Soft Jaws.
#328 • 38" x 24" Warehouse Cart.
10" Height to Deck. Vise Not Included.
#329 • Assorted Electronics.
(3) Fiberoptic Light Sources, and (2)Electrostimulators. And More
#330 • Chrysler Straight 6 Powered Portable Pump Unit.
5-3/4" Dia. Inlet/Outlet, Pintle Type Hitch, Approx. 64" x 12' x 68" Overall. $50 Load Fee Note: Flat Tires, Hasn't Been Used in Years. Unknown Working Condition
#331 • 6" Corner Notcher.
Overall: 18" x 19" x 16" Not Including Handle.
#332 • Approx. (55) Heavy Duty Plastic Storage Cases.
Approx. 28"×6"×7". Blue Cases Have a Bolt Locking Others Have No Locking. Pallet Approx. 40"×50"×59". Load Fee: $20.00
#333 • T & S Equipment Co. 72" Johnson Bar.
6" Toe.
#334 • Sioux 1 HP Double End Pedeatal Grinder.
10" x 1-1/2" Wheel Cap. 220V. 3 Ph. Overall: 27" x 24" x 54". Safety Glass Shield Broken on One Side as Shown.
#335 • Coolant Tank and Pump for Haas Model VF-2 CNC Machining Center.
With Auger Tube, Approx. 84"×28"×25". Load Fee: $20.00
#336 • (14) Assorted Adjustable Lathe Toolholders.
(10) 5/8" Shank, (2) 3/4" and (2) 2" Shank. Adjustable Centerline Lathe Toolholders.
#337 • Champion Model UH130B, Freestanding Commercial Dishwasher
Includes (9) Quick Wash Trays. 120-208/230V. Single Ph. Overall: 24" x 24" x 41". $20 Load Fee.
#338 • Vise Swivel Base Plus More.
Vise Swivel Base Marked D60-4. (?Kurt?). Coffee Can of Bearings. Plus Assorted Hardware.
#339 • Lista Tool Holder Racks.
(4) Lista Tool Holder Racks Approx 24" X 20: X 13".With Assorted Plastic Inserts. Yellow Inserts are Equipto not Lista.
#340 • Presto Eco4 Pneumatic Pallet Positioner
43-1/2" Table Diameter $20 Load Fee
#341 • Dumore Hand Grinder Plus More.
Dumore Hand Grinder Cat No. 10-251. 115 Vac 1.2 Amp. 1/10 Hp. Plus Optimum T 4100 Credit Card Terminal. And Box of Air Grinder Parts.
#342 • NSK Planet T500 Grinder.
NSK America Planet 500 Pneumatic Grinder. With 3/4" Straight Shank.
#343 • Hoshizaki America, Rolling Freezer.
Overall: 27" x 30" x 34". 120V. $20 Load Fee.
#344 • Assorted Machine Lights.
Including Machine Signal Towers, and Mountable Machine Work Lights.
#345 • (4) Low Voltage Power Circuit Breakers, 600 and 800 Amp.
(2) Westinghouse Type: DS 206 Low Voltage AC Power Circuit Breaker, 800 Amp. Frame 60 Hz, (1) Westinghouse Type: DS 206 Low Voltage AC Power Circuit Breaker, 600 Amp. Frame 60 Hz, (1) Westinghouse Type: DSL 206 Low Voltage AC Integrally Fused Power Circuit Breaker, 800 Amp. Frame 60 Hz. Load Fee: $20.00.
#346 • Linear Rails and Bearings.
(2) Linear Rails 48" Long, 1" Diameter. (4) Thompson SPB 16 OPN Pillow Blocks.
#347 • Assorted Tool Rests.
See Photos.
#348 • Assorted Drill Chucks.
See Photos.
#349 • Sturdi-Bort Pallet Racking.
Includes (1) 36"×111" Upright, (1) 36"×132" Upright, (6) 4"×94" Load Beams and (12) Clips. Last Day Removal Only.
#350 • Lantech E-Series Stretch Wrapping Machine.
60" Turntable Diameter, 115 Volt, Approx. 60" x 90" x 99" Overall. $50 Load Fee
#351 • (43) Brown & Sharpe No. 11 Screw Machine Collets.
Mostly B&S Branded with Some Hardinge. Also Includes (2) 11C Collets.
#352 • Kitagawa Model HS-06, 6-3/4" Hydraulic CNC Chuck.
.
#353 • (2) 18-Drawer Small Parts Cabinets.
Each Measures: 34" x 12" x 11". Many In Drawer Dividers/Seperators. In Bottom Unit.
#354 • Seal Products Inc. VacuSeal 4366M-HD Combination Vacuum Press
230 Volt Vac, 60HZ Single Phase, 20 Amps Maximum. Work Capacity: Up to 1/4" Thick: 42" x 66", Up to 1" Thick: 40"x 60", Dimensions: 72" x 52" x 7", 37" High (Open). Includes: Wood Base Approx: 48" x 84" x 24.5", and Thomas Power Air Pump Model: 727CM39-121, 115 Volt, 5.0 Amp. Load Fee $20. Last Day Removal Only.
#355 • 2-1/4" Wide Belt Sander on Pedestal.
2 HP Motor. 16" Distance of Belt Against Frame Rest. Overall: 30" x 16" x 38". 220/440V. 3-Ph.
#356 • Westward Model 4TM73 15" Drill Press.
12-1/2" Round Adjustable Angle Table, Throat: 7-1/2", Belted Speeds: 250 to 3100 RPM, Front Housing is Broke as Shown, Quill Handle Holes Need Repaired, (1) Handle, 115 Volt, Approx. 13"×19"×64". Load Fee: $20.00
#357 • Tailstock with Approx. 6-3/4" to Center.
Base is 4"W x 7-1/2"L. Overall Approx. 10"×4-1/2"×8".
#358 • Marathon 7-1/2 HP Electric Motor with Right Angle Drive and Roller Chain Gear.
Motor: 230/460V. 3 Ph. 1760 RPM, Output: Nord Drive Systems Type: SK92772 N210TC. $20 Load Fee.
#359 • (15) Sets of Hardinge S15 Collet Pads.
.
#360 • Uline H-2508 Pallet Positioner.
5000 lb Capacity, 40-1/4" Turntable Diameter. $20 Load Fee
#361 • Assorted Commercial Kitchen Containers with Lids.
.
#362 • (2) Brentford Cabinets, No Keys.
Approx. 24" x 18" x 25".
#363 • (3) Commercial Kitchen Liquid Dispensers.
.
#364 • (4) 8-20 Aluminum Frames with Polycarbonate Sheet.
Approx. 28" x 33-1/4" x 1-3/4".
#365 • Habor Model HWK-760PTSA Chiller.
Refrigerant: R22 0.95KG, Temp. Cont.: 10-40°C, 220 Volt, Single Phase. Approx.19"×20"×45". Last Day Removal Only.
#366 • Kitchen Aid Commercial 7Qt Mixer with (3) Attachments.
.
#367 • (15) New Peter Paul Series 70, Model 71, Solenoid Valves.
See Photos for Part Specifics.
#368 • (3) New KNF Diaphragm Vacuum Pumps
Type: PM31529-950.50. 24VDC, See ID Tag for Specs. Each Measures: 11-1/2" x 7-1/2" x 4".
#369 • 96" x 36" NSF Rolling Stainless Steel Worktable.
36" Height.
#370 • Endoscope Cameras.
Endoscope USB Cameras. (1) Marked Teslong with Case and Instructions. (1) Unmarked.
#371 • Assorted Pneumatic Regulators and More.
.
#372 • LA Cimbali M21 Espresso Machine with Espresso Bean Grinder
.
#373 • (2) Emerson Comnander SK Model: SKB3400110, (1) SKC3400300 and More.
.
#374 • Kiene Model K-1650, Wheel Grabber.
With Stand.
#375 • 12" Machine Vise. With Rounded Pipe Jaws as Shown.
Overall: 12" x 26" x 8".
#376 • Believed to Be Original Monarch Lathe Tooling Cabinet.
Overall: 24-1/4" x 20-1/4" x 41". See Last Photo for Brochure Picture.
#377 • Husky Model 36SSCHTHD Tool Chest.
5-Drawer and (1) Pull Out Tray, Approx. 36"×20"×23".
#378 • Transfer Punches and More.
Partial Set of Transfer Punches. (3) Curved Scrapers and More.
#379 • Assorted Chuck Jaws.
Most Steel some Aluminum.
#380 • Mastercool Model 69788-A, R134A, Portable Recovery/Recharge/Recycle System.
With Recovery Lines. 120V. Overall: 20" X 25" x 42".
#381 • Assorted Machine Parts.
Timing Belt Pulley, Some Collets in Holder. Other Assorted Parts.
#382 • Assorted Wire Grid.
Includes (2) Approx.43"×93"x.20" Diameter - Galvanized, (4) Approx.44"×93"x.20" Diameter - Galvanized, (2) Approx. 47"x79"x3/16" Coated and (1) Approx. 47"x55"x3/16" Coated.
#383 • Assorted Pneumatic Components.
Regulators, Fittings, Gauges, Pneumatic Cylinders and More.
#384 • (2) Jet Riser Block Kits.
For JWBS-14 Series Bandsaws. Stock No. 708717. Model JRB-14.
#385 • (2) 18-Drawer Small Parts Cabinets.
Each Measures: 34" x 12" x 11". Top Unit Missing (4) Drawers as Shown.
#386 • 6" Speed Vise.
Approx. 9"×15"×4".
#387 • Assorted Box Turning Tools and Parts.
.
#388 • Duke Model HB-4CM-N7 M, Refrigerated Serving Table.
Fits (4) 4" Steam Table Pans. Sneeze Guard, Overall Not Including Sneeze Guard: 60" x 26-1/2" x 36". 18" Height x 35-1/2" Wide Sneeze Guard with Overhead Lighting. 120V. See Lot 486 For Interconnecting Soup Station. $20 Load Fee.
#389 • (31) Balas C8 Collets.
.
#390 • Rice Lake Model 4X4HP-5K Pallet Scale with Rice Lake 480 Legend Control.
Capacity: 5,000 lbs, 48"×48" Platform. Load Fee: $20.00
#391 • (2) Vise Swivel Bases and Lathe Faceplate.
(2) Vise Swivel Bases. (1) Marked LW Chuck 6 1/2 SW-B. Lathe Faceplate is 12" Diameter.
#392 • Craftsman Oilless Piston Sprayer.
Model 283-1431. I/3 Hp 115 Vac 8.4 Amps. 30 cfm at 40 psi.
#393 • (30) New Peter Paul Series 70, Model 71, Solenoid Valves.
See Photos for Part Specifics.
#394 • Metal Cabinet with Wood Shelves.
Approx. 30"×21"×69". Load Fee: $20.00
#395 • Nikon Model V-12 Profile Projector.
with 2-Axis Mitutoyo DRO. 12" Screen, (3) Objectives: 10x, 20x, 100x, Metal Stand, 1-Phase, Approx. 20" x 33" x 67" H. Unit Turns on, Lamp is Burnt Out. Assume Batteries are Dead on Mitutoyo Indicators. Cart Not Included. $20 Load Fee.
#396 • Speed Rack Pallet Racking.
Includes (2) 48"×132" Uprights, (4) 5-1/2"×100" Load Beams and (8) Bolts. Last Day Removal Only.
#397 • Assorted Handles and Wrenches.
Vise Handles, Chuck Wrenches and More.
#398 • 6" Diameter 3 Jaw Chuck.
6" Diameter 3 Jaw Chuck. Made in China.
#399 • Assorted Bearings and Hour Meters.
Bin of Assorted Ball Bearings and (3) Cramer Type 635 Elapsed Time Indicators.
#400 • Hendley & Whittemore Plate Roll with Tube Bender Attachment. Believed to be Model 3B.
Specifications for Model 3B are: 1/4" x 44", Shut Height:12", Roll Diameter: 6", Includes Assorted Roll Dies as Shown, 480 Volt, 3-Phase, S/N: R15851, Approx. 134"×48"×54" and Approx. 4,000 lbs. Load Fee: $100.00. Open Trailer Only. No Sides or Fenders.
#401 • Center Scope and Jig Borer Set.
Center Scope by Center Scope Products. Weldon Jig Borer Set.
#402 • Tap Holders and PanaVise.
Assorted Tap and Drill Holders. And PanaVise with Weighted Base.
#403 • Norton Gemini Cut Off Wheels.
(2) Boxes of 25 in each box. Norton 662435-10659. 4" X 1/8" X 3/8".
#404 • Bacharach FYRITE II.
Combustion Gas Meter with Instructions.
#405 • True Refrigeration Model: T-49-HC Commercial Upright Refrigerator on Casters.
49 Cu. Ft. Stainless Steel, Temperature Range: 33°F-38°F, 115 Volts, Approx. 55" x 30" x 83". Load Fee $20.00.
#406 • Carbide Insert Facemill.
3" Diameter. With Extra Parts and some Inserts.
#407 • Weldon Endmill Sharpener Kit.
Weldon Endmill Sharpener Kit with Spindles and Bushings for various Endmills.
#408 • (7) Cleveland 37/64 Drills.
With Taper Shanks. And Steel Tooling Bar.
#409 • 5C Collets in Storage Rack.
(30) 5C Collets in Steel Storage Rack.
#410 • LNS Model Quick-Load Automatic Barfeed.
Bar Stock Diameter Range: 5/16" to 3-1/8", Minimum Bar Length: 6", Maximum Bar Length: 60" (Not to exceed the combined length of the head stock, chuck and actuator), Loader Rack Capacity: 39", 230 Volt, 3-Phase, S/N: 24354-97, Approx. 76"×50"×60" and 800 lbs. Click "Documents" Tab for Manual. Load Fee: $20.00
#411 • Omni Turn Gang Posts and Tool Holders.
(3) Gang Post A-L with (3) Tool Holders and Some Parts.
#412 • US Digital Encoder Kit with Cable.
E6 Encoder, 1024 CPR 5/8" Bore, Through Hole Cover and 10' Cable. Plus Some Used Shaft Sensor.
#413 • Mercuria Head with Hardinge Part.
Mercuria Head 2.25" Diameter with 5/16 Shank. Part with Dovetail marked Hardinge.
#414 • NSK Bantam 150 plus Vernier Calipers.
NSK Bantam 150 Air Powered Grinder Made in Japan. 3/4" Shank. Mitutoyo 12" Vernier Caliper. 13" Vernier Caliper no name. Daedal Ball Bearing Stage with 1/2" Travel Starrett Micrometer Head.
#415 • Assorted 5C Collets.
Assorted Expanding and Emergency 5C Collets. With Collet Stops.
#416 • 5C Spin Indexer.
5C Spin Indexer with 3 Jaw Chuck 3" Diameter.
#417 • Star Vent RV Ventilator.
StarVent RV Ventilator with Smoke Lid. Approx 14" X 14". With Max Fan RV Ventilator Hood.
#418 • Heavy Duty Shelves.
(6) Heavy Duty Shelves. Each Approx 11" X 19" X 6".
#419 • (2) Micrometers.
(1) Starrett No. 220 Multi Anvil Micrometer. In Starrett Case. (1) Etalon 0-1" Micrometer. Carbide Anvils in Wooden Box.
#420 • Winpower Mfg. Model 25/15PT2 Tractor Driven Alternator/Generator.
Volts: 120/240, Single Phase, KVA: 25, KW: 25, Amps: 104, P.F.: 1.0, PTO Powered, Approx. Load Fee: $20.00
#421 • Starrett Dial Indicator.
Starrett No. 656-441. 0-1" Range. Dial 0-100. Dial 3.5" Diameter. Graduated 0.001".
#422 • Drill Chucks Plus More.
(2) Jacobs No. 3 Drill Chucks. 0-1/2" Range. One has Taper Shank and Second Is for Threaded Shank. Albrecht Chuck Range 1/32" to 1/2". Plus Drill Stand, Wrench and Carbide Tipped Tool 3/4" Shank.
#423 • Mitutoyo Digimatic Indicator Plus More.
Mitutoyo No. 575-123 Digimatic Indicator. Battery Powered 1 Inch Travel. 0005" Resolution. Plus Pemamo 220-D24. And Handle Marked IBM 45D0415.
#424 • Dorsey Dial Bore Gage.
Model 2130-01. In Fitted Wood Case.
#425 • Rego-Fix Collet Wrenches.
(6) E16AX Wrenches, (13) E25AX Wrenches (1) E16M and (1) E20M. Plus a Collet Stop?
#426 • (2) Heidenhain LS403 Scales.
Heidenhain LS403 Length 420mm, and LS403 Length 270mm. Plus SMC PFM711S-C8L-Aand PF2M725S-C6-A Digital Flow Switchs.
#427 • Ridg-U-Rak Style Pallet Racking.
Consisting of (3) 42" x 72" Uprights, and (8) 90" Cross Members. *Note. The Pallet Racking Uprights have No Base Feet. Last Day Checkout Removal Day Only. See Lot 461 For Similar Type.
#428 • Assorted Grinding Wheels.
Assorted Grinding Wheels on Metal Wheels. Diamond? Most Holes Are 1.25".
#429 • Assorted Mold Pins.
See Photos.
#430 • Clark Model TW20, 2000 Lb. Cap. Electric Forklift. And Single Ph. Charger.
106" Max Lift, Type E Truck, 16" Carriage with Tilt. 36" x 4" Forks. 5185 Indicated Hours, Truck Alone Measures: 39" x 68" x 72-1/2". Battery Pack Has Recently Been Replaced Per Seller. Battery Charger Specs: Clark Parts, Model TSF12/750B1, For LA Type 12 Cell Batteries. 208/240/480V. Single Ph. 24 DCV. And Measures: 24" x 24" x 26-1/2". $100 Load Fee. Click on 2nd Photo for Video.
#431 • O. S. Walker Magnetic Chuck.
O.S. Walker Magnetic Sine Chuck. Model01606. Top is 6" X 6".
#432 • Assorted HSS Endmills.
Shanks from 1.25" to 3/4".
#433 • 8" Buck 4-Jaw Chuck.
#434 • (3) Lathe Faceplates.
(2) 10" Diameter and (1) 12" Diameter.
#435 • Pump, Right Angle Block and More.
Pump with 1/3 Hp 115 Vac 5.9 Amp Motor. Right Angle Block Approx 6" X 9" X 6". CAST Iron Trays. Swivel Base for Vise Seat Approx 9" Diameter. Empire Tool Large Parting Tool.
#436 • Omni TurnPosts and Hardware.
OmniTurn Posts, Toolholders and Hardware.
#437 • (48) Clamps.
(48) Clamps. See Photos.
#438 • Instructions for Hauser 2BA Jig Bore.
Instructions for Hauser Type 2BA Jig Boring Machine. Spiral Bound.
#439 • Breakers, Safety Switch.
GE General Duty Safety Switch, Other Electrical Items.
#440 • Case For Pneumatic Grinder.
Case for NSK Type Pneumatic Grinder but NO Grinder. Includes Regulator and Hoses.
#441 • 4" 3-Jaw Chuck
on 5C Shank.
#442 • VFDH2 Tooling and More.
(4) VFDH2 Tooling with 1" Shanks. Plus (2) Tool Posts Approx 3" Square.
#443 • Vise Stop Parts and 5C Spin Indexer.
Vise Stop Parts and 5C Spin Index Missing Collet Closer.
#444 • Centering Scope and Brass Scale Weights.
Center Scope Instruments Centering Scope with Taper Shank and Partial Set of Brass Gram Weights.
#445 • Large Of Assorted Circuit Breaker.
See Photos.
#446 • Pace Soldering Stations and More.
Pace Soldering Stations plus Soldering Irons and Accessories. (5) HBM Z6FD1Load Cells. And More.
#447 • Large 5C Step Collets Plus Holder.
Hardinge Step Collet Closer with Threaded Interior. And (10) Assorted Step Collets.
#448 • Alina Gage Pin Set.
Alina Minus Gage Pin Set. Missing .0625 Pin. Top of Box is Loose. Plus Boxes Of Deltronic Gage Pins.
#449 • Assorted HSS Tool Bits.
From 1/2" to 1/4".
#450 • Hillman Roller Deluxe 15 Ton Machinery Skate Set
With Case. 6" Top Swivel Pads. (2) Steering Handles, Case Measures: 27" x 14" x 10".
#451 • Assorted Lab and Shop Materials.
Bijur Lube Assemblies, Marsh Gauges, Acetylene Torch and More.
#452 • Assorted Grinding Wheels.
Mostly 7" Norton. (2) Cincinnati Milacron 7" X 1/4" X 1.25" (3) Norton 32A46K5V8E.
#453 • Dial Indicator with Stand.
0-1" Range Dial Indicator 0.001" Resolution with Indicator Stand. Stand has Fine Adjust. Stand is Approx 10" X 10" X14".
#454 • Plastic Storage Bins.
(30) Plastic Storage Bins. Approx 7" X 12" X 4".
#455 • Superior Model: F49-S Commercial Freezer on Casters.
115 Volt, Approx. 55" x 31" x 84". Load Fee $20.00.
#456 • Stainless Steel Shelves.
(4) Stainless Steel Shelves. Each Approx 12" X 19" X 6".
#457 • (5) Cat 40 ER16 Collet Chucks.
(5) Accupro Cat-40 ER16 Collet Chucks. Accupro #Cat-40 ER16-3.50".
#458 • Rotary Table Fixture, Approx. 11"×2-1/4".
.
#459 • Kurt Model 3600V 6" VersatileLock Precision Machine Vise.
No Handle, Approx. 6"×17"×4-3/4".
#460 • (2) Uline Flammable Liquid Storage Cabinets
Approx. 43" x 18" x 44". Load Fee $20.00.
#461 • Ridg-U-Rak Style Pallet Racking.
Consisting of (2) 42" x 72" Uprights, and (6) 96" Cross Members. *Note. The Pallet Racking Uprights has No Base Feet. Last Day Checkout Removal Day Only.
#462 • Assorted Electrical Items.
See Photos.
#463 • 27-Drawer Small Parts Organizer.
Overall: 31" x 13-1/2" x 36-1/2". Rolling Cart Not Included.
#464 • Star Mfg. Model GX14IG, "Grill Express" Sandwich Grill.
14" x 10" Grill Plattens. 120V.
#465 • Duracraft Model DP-1617, Benchtop Type Drill Press.
3/4 HP Electric Motor, 8-1/2" Throat, 2-1/2" Quill Travel with MT#2 Reciever and Albrecht 1/2 Cap Drill Chuck. 14-1/2" Dia. Table. Approx. 16" Max Distanvmce From Table to Quill. 16 Speeds From 195 RPMs Up to 3820 RPM. Overall: 15" x 30" x 42". 120V. Cast Table Adjustment Level Needs Repair or Replacement as Shown. $20 Load Fee.
#466 • Dayton Model 2Z646B, 1" Belt Sander.
9" x 7" Work Table. 1/3 HP. 120V. Overall: 9" x 24" x 22".
#467 • Reliance Duty Master A-C Motor, 1- Hp, 115 V.
Also Includes: Assortment of Electrical Items. Please See Photos for More Details.
#468 • Assorted Hardinge Tooling.
Hardinge Marked Tooling.
#469 • Large Quantity of Commercial Product Hangers, Approx. 10" Length
Also includes: Variety of Hand Tools and Such.
#470 • Cousins Packaging Model LP2100-SRT Stretch Wrapping machine.
57" Dia. Turntable, 115 Volt, 1-Phase, s/n: 240316-SRT-11997, Approx. 103" x 62" x 87" Overall. $50 Load Fee
#471 • Various Hand Tools
.
#472 • Assorted Equipment.
Roll of 3/4" Liquid Tight Flexible Conduit. 7" Diameter Pneumatic Orbital Sander. A Mechanical Assembly and More.
#473 • Multi Axis Measuring Device.
Approx 18" Travel in One Axis. Approx 12" in the Other Axis.
#474 • Large Caster Wheels.
(4) 5-1/4" X 1-1/4" Casters on Aluminum Rails 23" Long. (2) 9.5" High Locking Casters.
#475 • Antique 1942 Boiler Engineers License and Wood Carpenters Toolbox
Rolling 5-Drawer Tool Box Measures: 33-1/2" x 16-1/2" x 20-1/2". Engineers License Dated Jan. 16th, 1942, for 100 Horse Power Steam Engines, Steam Boilers, and More.
#476 • Threaded Lathe Faceplates.
Iron Faceplates are 7.5" Diameter, 10" and 12" Diameter. The Aluminum One is 12" Diameter.
#477 • Assorted Relays and Other Items.
Assorted Relays, Din Connectors and More.
#478 • Wheelabrator-Hutson "Super Quiet Burr Bench".
15-1/2" x 19-1/2" x 15" Inside Dimensions. 120V. Overall: 22-1/2" x 27" x 36". Cover Brittle and Could Use Replacement. $20 Load Fee.
#479 • (2) Waring Kitchen Appliances.
(1) NSF Emulsion Blender, (1) Commercial 10" Length Toaster.
#480 • (4) Linear Slide Assemblies.
Model Number 440000. Approx 2 Inch Travel. Each Approx 2.25" X 2.25" X 9".
#481 • Assorted Cat and BT Tool Holders.
(3) Cat 40 Toolholders. Endmill and Universal Engineering Kwik Switch. (3) BT40 Toolholders Crterion DBL-204 Boring Head Tap Holders and (2) BT30 Toolholders.
#482 • Interthor Extended Reach Electric Lift 3300 Lb. CAP. Pallet Jack.
60" x 6-1/2" Forks, 13-3/4" Distance Between Forks. Battery Likely Needs Replacement of Charging. No Charger Included. Missing Shroud as Shown. Indicator Light Work and sounds Like it Wants to Work.
#483 • 6" Swivel Base Bench Vise.
Overall: 6-1/2" x 20" x 9".
#484 • NSF Stainless Steel Prep Table with Edlund Commercial Can Opener.
Overall: 48" x 30" x 35-1/2" to Tabletop.
#485 • Hoshizaki American Model: CRMF27-W Freezer on Casters.
Control Set Point: -10°F to 10°F, Approx. 27" x 30" x 40". Also Includes: John Boos Model: EFT8-3018SSK Stainless Steel Table, Approx. 18" x 30" x 38". Load Fee $20.00.
#486 • Duke I.D. No. DcHB2-ST M, (2) Basin Heated Soup Serving Cabinet Base.
8" Dia. X 7" Basins, Overall: 32-1/2" x 26-1/2" x 36". Possible to Connect to Lot 388. $20 Load Fee.
#487 • Giant Spanner Wrenches and Chuck Wrenches.
Williams No. 415 Spanner Wrench Approx 23" Long Plus (4) Large Spanner Wrenches. Approx (10) Assorted Chuck Wrenches.
#488 • (6) VDI-40 Tool Holders.
Assorted VDI-40 Tool Holders.
#489 • Dial Indicator With Stand.
Federal A1/2Q Dial Indicator 0.0001" Resolution, Dial 2-0-2. Stand Approx 8" X 12" X 14".
#490 • Powermatic Model 1200, Variable Speed Floor Standing Drill Press.
1HP, 10-1/4" Throat, 6-1/2" Quill Travel with MT#3 Receiver and Jacobs 0-1/2" Cap. Drill Chuck. 18" x 16" T-Slotted Work Table with Coolant Trough. Approx. 32" Max Distance From Quill to Worktable. Speeds from 175 Up to 1140, Large E-Stop Safety Button Equipped, 208-230/440V. 3 Ph. Overall: 22-1/2" x 34" x 75". $20 Load Fee. $50 If Layed Down. ,
#491 • Tailstock with Approx. 2-1/2" to Center.
Base Approx. 4"×3" on a 6-1/2"×4"×1-1/8" Riser.
#492 • (13) Various Pressure Guages, (7) Regulators 1/4", and More.
.
#493 • Plug And Ring Gages.
Go / No Go Plug and Ring Gage Assortment.
#494 • Speed Rack Style Pallet Racking.
Consisting of (2) 32" Uprights. 120" x 144", and (4) 96" Cross Members. Clips Included. Last Checkout Day Removal Only
#495 • Delta Series 31-520, 6" Belt Sander.
On Base. 120V. Overall: 24" x 22" x 58".
#496 • (2) Aluminum Hardcoated Plates Approx. 17"×10"×1-1/4".
Also Includes Mounts and More.
#497 • Vulcan Electric Griddle Top with Refrigerated Storage Base.
Vulcan 36" x 24" Electric Griddle Top. 3-Ph. Measures: 36" x 32" x 12" Vulcan Refrigerated Base with 2-Drawers Measures: 36" x 34" x 25". And 120V. Overall: 36" x 35" x 41". $20 Load Fee.
#498 • Vacuum Pump.
MADA Model 172BS-II. 115 Vac 0.68 Amp.
#499 • Fairbanks C-72, 72" Johnson Bar.
Steel Wheels, 6" Toe.
#500 • Highlight Industries Predator XS Stretch Wrapper.
48" x 48" Turntable, 120 Volt, Approx. 48" x 114" x 94" Overall. $50 Load Fee
#501 • New Dayton 24" Oscillating Air Circulator Fan.
No Pedestal or Mounting Bracket. Replacement Fan, Shroud, and Motor Only.
#502 • Masstron/Toledo 1800 Lb. Cap. Scale.
30" x 24" Platform. All Cords Have Been Cut and Need Repair.
#503 • Hardinge Cutoff Toolholder.
Hardinge Model 7 Cutoff Tool Holder.
#504 • Large Assortment Mold Pins.
See Photos.
#505 • Large Diameter Drills.
Large Diameter Drill Assortment.
#506 • Pitco Model SE14, Dual Basket Commercial Frier.
Overall: 16" x 35" x 40". 208V. 3 Ph. $20 Load Fee.
#507 • Lathe Centers.
Assorted Lathe Dead Centers.
#508 • Assorted Gauges.
Assorted Ashcroft, Weksler, Weiss and Other Pressure Gauges.
#509 • Cognex In-Sight Systems.
(2) Cognex In-Sight Industrial Camera Systems. Part # 805-0037-1.
#510 • (2) Uline Flammable Liquid Storage Cabinets
Approx. 43" x 18" x 44". Load Fee $20.00.
#511 • Assorted Ball Bearings.
6203 FAG. Koyo, SKF and More.
#512 • Assorted Electric Motor Brushes.
Assorted Electric Motor Brushes. See Photos.
#513 • Scherr Tumico Dial Bore Gage.
Range 0.75" to 1.5". In Fitted Case.
#514 • Assorted Locks.
Master Lock Paddlocks. Assorted Other Locks.
#515 • Roller Chain.
Diamond Roller Chain and Chain Links.
#516 • greasing tool Hoses and More.
Pump Type Oil Can, greasing tool Hoses, Wire Brushes and More.
#517 • (6) 96" x 34" Teardrop Style Uprights.
Note. No Base Feet as Shown. Last Checkout Day Removal Only
#518 • Kurt 6" Machine Vise.
No Handle, Approx. 9"×18"×5".
#519 • Heavy Steel Shop Cart.
Overall: 31" x 27" x 32-1/2". $20 Load Fee.
#520 • Linear Motion Stages.
(4) Linear Motion Stages. Approx 2 " Travel. Each Approx 2.25" X 2.25" X 9".
#521 • Assorted Electrical Equipment.
Motors, Transformer, Power Supply, and More.
#522 • Large Quantity of Commercial Cooking Containers, Utensils and More.
.
#523 • Timing Belt Idler Pulleys.
(44) Power Drive Technologies 24XL037SP010 Idler Pulley.
#524 • Pneumatic Cylinders and More.
(5) FABCO-Air FPS-606-4 Pankake Air Cylinders. With Regulators and Electronic Valves, And More.
#525 • (2) New KNF Diaphragm Vacuum Pumps
Type: PM31529-950.50. 24VDC, See ID Tag for Specs. Each Measures: 11-1/2" x 7-1/2" x 4".
#526 • Assorted Turret Lathe Tooling.
Assorted Turret Lathe Tooling.
#527 • Assorted Steam Table Pans.
From 1/8 " up to Full Size by 6" Deep. Also Includes Sheet Pans and More.
#528 • 6" x 6" Platton Chrome Plated Press Frame
Approx. 8" Press Cap. Missing Hydraulic Cylinder Press Components. Overall: 8-1/4" x 6" x 14".
#529 • (2) Rubbermaid Commercial Utility Dump Carts
Capacity: 1 Cu. Yd., Max Load: 750 Lb., Approx. 31" x 73" x 44". Load Fee $20.00.
#530 • (4) DEIF, Model: (3) 1224000002 and (1) 1224000009 SGC Single Generator Controller
Approx. 5-1/2" x 4-1/2" x 1-1/2". Relisted from May MTM Due to Bad Bidder.
#531 • Various Sizes of Small Parts Bins
.
#532 • Vacuum Pump.
MADA Inc. Model 172BS-II. 115 Volt 0.68 Amp.
#533 • Huge Assortment Band Saw cutting tool.
Assorted Band Saw cutting tool. Some Coils Uncut. Some Cut to Length. Huge DoAll Coil.
#534 • 9-Shelf NSF Rolling Commercial Stock Can Shelving Unit.
9-Rows with (3) Selections Per Row. Holds Cans 7" Height and 6" Dia. Overall: 25" x 35" x 69-1/2".
#535 • Assorted Braided Steel Hose.
Lengths From 10' to 3'.
#536 • 80 Grit 1 inch Wide Sanding Belts.
(32) 80 Grit Sanding Belts 1 inch Wide Approx 42" Long.
#537 • (30) 44"×48"L Metal Pallet Rack Decking.
Load Fee: $20.00. Last Day Removal Only.
#538 • Universal Acura Flex Collets and Holder.
Universal Engineering Holder 91044 with 1.25" Shank. (5) Acura Flex Collets.
#539 • Storage Racks with Holes.
(3) Racks with 30 Holes, Approx 2.08". (2) Racks with 72 Holes Approx 1.26". (1) Rack Marked R8 Collet Stand.(1) Rack with 72 Holes Approx. 76". And (1) rack with 168 Holes Approx 0.65".
#540 • Branson Model 8540-48, Series 8500 Ultrasonic Power Supply and Transducer.
208/240V. Single Phase. Control Box Measures: 7-1/2" x 16" x 5-1/4" Not Including Mounting Rails on Front of Cabinet. Transducer Measures: 9-1/2" x 14" x 3-1/4". Note: Wiring on Transducer Does Not Appear to Connect to Power Supply. See Photos. Relisted from May MTM Due to Bad Bidder.
#541 • (17) Teardrop Style Beams.
99" Length x 4-1/2" Thick with 3/4" Step. Last Checkout Day Removal Only
#542 • 1" Wide Belt Sander.
1/4 HP Dayton Electric Motor, 9" x 7" Table. 120V. Overall: 12" x 22" x 23". No Belt Back Support as Shown.
#543 • Assorted Electrical Equipment.
Vacuum Pump, Daigger Vortex Genie 2. Small Precise Electrical Switch. Foot Pedal Control Cable.
#544 • Assorted Wrenches and Handles.
Collet Wrenches, Chuck Wrenches, Vise Handles and More.
#545 • 5MT and Boring Bars.
Cushman Drill Chuck 1/8" to 5/8" Capacity on 5 MT Shank. Putnam HA-55 3/4" Endmill Holder with 5MT Shank. (2) Taper Adapters. (2) Large Boring Bar Holders. And Large Lathe Dog.
#546 • Louisville 8' Fiberglass A-Frame Ladder.
.
#547 • Lathe Tooling.
Assorted Threading Dials, Tooling, Stops and More.
#548 • Large Tap and Die Wrenches.
From 13" to 27".
#549 • 6" Pittsburgh Drill Press Vise.
#550 • Xi'an Grand Harvest Equipment Co. Model BS-S10 Small Scrap Copper Wire Granulator Machine.
Machine is for Small Dry Copper Wire such as Auto-Wire, Communication Cable and other Mixed Copper Wire/Cable. Separates Copper and Insulation. Click "Documents" Tab for more Information. Includes Extra cutting tools and Toolbox. 220 Volt, Single Phase, Approx. 80"×32"×85" and 1,900 lbs. Load Fee: $50.00
#551 • (20) 36"×38"L Metal Pallet Rack Decking.
Load Fee: $20.00. Last Day Removal Only.
#552 • Simplex A17, Railroad Jack.
21" at Rest Up to Approx. 34" Height. Missing Dust Side Shields as Shown. Internal Gear Mechanism Needs Cleaning and Grease.
#553 • (2) Pneumatic Chain Hoists.
(1) ARO 1-Ton, (1) Gardner Denver Size: 86P-110, Believed to Be 1/2 Ton with Trolley. Both with Approx. 6' Chain Drop.
#554 • (4) IBC Tote Frames.
$20 Load Fee
#555 • Hatco "Flav-R-Savor" Holding and Display Cabinet on Rolling Duke Cabinet Base.
120V. Power input. On Duke Model HB2-CS, Interlocking Rolling Serving Station. Hatco Cabinet Independant and Measures: 23" x23" x 33". $20 Load Fee.
#556 • Workforce Model 18405, Retractable Air Reel.
Overall: 10" x 22" x 18". Quick Connect Ends.
#557 • (2) 97-Position Inclined Collet Racks.
(1) with 1" Dia. Holes, (1) with 1-1/4" Dia. Holes. Each Measures:32" x 16" x 8-1/2".
#558 • 11-1/4" x 7-1/4" Drilled and Tapped Sine Plate.
Also Includes Bolt Down 11-1/2" x 7-3/4" T-Slotted Top Riser.
#559 • Steel Diesel Fuel Storage Tank.
Mounted to Steel 66" x 42" Baseplate with Fork Pockets. No Pump or Equipment Filling Output as Shown. Tank Measures: 38" Dia. X 61" Length. Overall: 66" x 42" x 51". $20 Load Fee.
#560 • Assortment of Parts, Components and More
.
#561 • Baldor 10HP, Electric Motor.
3490 RPM, Approx. 1-3/8" Keyed Output Shank with 6-1/2" Dia. 3 Belt Pulley. 230/460V. 3-Ph.
#562 • Workshops 1/4 HP Double End Grinder on Sioux Pedestal.
Workshops 1/4 HP 6" Double End Grinder. 120V. 3450 RPM, with Overhead Safety Shroud. Sioux Pedestal Base With Tray. Top Platform Measures: 10" x 11" and 34" Height to Pedestal Base. Overall: 27" x 19" x 50". $20 Load Fee.
#563 • Large Bin of Abrasives.
(4) Rolls of 3M 373L Microfinishing Film 450 Feet Long. Assorted Sanding Belts and More Abrasives.
#564 • Fairbanks Rollertop Benchtop Scale.
Model: 70-2455-4W/431, 20-1/2" X 20-1/2" Top. With Rollerball Top. 110V.
#565 • Jet Model JDP-17FSE, 16-1/2" Drill Press.
3/4 HP Electric Motor, 3-1/4" Quill Travel with 1/2" Cap. Drill Chuck. 8" Throat, 13" Dia. Adjustable Height/Angle Table with 28" x 20-1/2" Aluminum Oval Plate Fixture Pan. Speeds from 250 RPM Up to 3ppp RPM. 120V. Overall: 28" x 36" x 65". $20 Load Fee.
#566 • Tennant Model M5400, Walk Behind Floor Scrubber.
24V. Dc, with Charger. Overall: 36" x 48" x 42". Includes 24V. Battery Charger. Missing Top Cover as Shown. Unknown Working Condition. $20 Load Fee.
#567 • Denios AG, Base Drum Heater.
21-1/2" Dia. Base, Adjustable Heating Level Knob. Specialty Plug End as Shown.
#568 • Gould Type K-600S, Power Circuit Breaker.
600V. Ac, 22000 Amps, Model 01, Overall: 15" x 22" x 20".
#569 • Hardine HLV-H Power Feed Gears.
.
#571 • Assorted Mill Components.
Including Stainless Steel Mag Base Air Tool, T-Slot Cleaners, and (2) Kurt D60/D675/D688 Vise Handles.
#572 • (3) Control Techniques Commander SE
Includes: (3) Manuals.
#573 • Sears/Crafstman 15-1/2" Floor Standing Drill Press.
1/2 HP, Speeds from 380 Up to 8550 RPM, 7-1/2" Throat, 3-1/2" Quill Travel With Jacobs 0-1/2" Cap Drill Chuck. (2) Table Choices From 12" x 10" And 8-1/2" x 8-1/2" Adjustable Angle Table. Overall: 16" x 28" x 68". 120V. $20 Load Fee.
#574 • (2) Electric Right Angle Drive Units.
With Belt Drive Output Pulleys. See ID Tags for Motor and Drive Details.
#575 • Cal-Hawk 6" Belt &9" Disc Sander.
Model No. 240-3016, 3/4 HP Motor, 120V. Overall: 18" x 30" x 18". Adjustable Angle Belt, 12-1/2" x 6" Worktable can Be Moved Between Disc and Belt Positions.
#576 • Fiber Optic Cable, Starrett Micrometer, Vise.
Fiber Optic Cable 40" Long. (2) Micrometers 0-1". Starrett No. 436 Micrometer. And 2-1/4" Wide Vise.
#577 • Silver King SKR27A, Commercial Refrigerator.
Overall: 27" x 29-1/2" x 32-1/2". On Casters. 120V. $20 Load Fee.
#578 • Assorted 5" Casters
.
#579 • Assorted Tool Racks.
Huot Tool Rack. White Steel Rack with 18 Holes Approx 1.88" Diameter. Aluminum Drill Rack from 1/2" to 1" by 64ths. And Wooden Rack with 14 Holes Approx 1" Diameter.
#580 • (3) Aluminum Plate Truck Deck Storage Boxes.
All Three with Lockable Latches. And Piston Assist Opening. And Weather Resistant Box Ventilation. (1) 20" x 27" x 19", (2) 29" x 21" x 21".
#581 • 12" Cadillac Type Gage Riser Hold Downs.
ALSO includes Assorted Harding C10, and More
#582 • ITE Type K-600, Power Circuit Breaker.
600V. 22000 Amp, 480V, 30000A, 240V. 42000 Amp.
#583 • Southbend Dual Stack Electric Commercial Ovens
Oven Model Numbers: SLES/20SC, 120V. Blower Motors, Single or 3 Ph. 208/240V. Element Heating. Overall: 38" x 38" x 64-1/2". On Wheels. $20 Load Fee.
#584 • Variety of Assortment of Hardware and Storage Containers.
.
#585 • Huot Toolscoot, 36-Position 50 Taper Cart with Tooling.
Tooling Cat 50 Tool Holders. Types Include Endmill Type, Shell Mill Type, and More. Large Quantity of Insert Type Endmills, and Shell Mills on Holders as Shown. Cart Measures: 37" x 18" x 35".
#586 • Generator Components as Shown.
Frame is Approx. 104"×40"×12", Control is Approx. 32"×23"×30". Load Fee: $20.00. Last Day Removal Only.
#587 • Power Vane 4000 Lb. Cap. Pneumatic Chain Hoist.
$20 load Fee.
#588 • (3) Steel LP Forklift Tanks.
12" Dia. X 28" Length.
#589 • Graco Retractable Fluid Reel.
.
#590 • Assorted Hand Tools.
Machinery Handbook. 23rd Edition. Black & Decker heat tool. Saw cutting tool, Taps, and More.
#591 • Assorted 5/8" Shank Toolholders.
Assorted Toolholders with 5/8" Shanks.
#592 • Assorted Electrical and MRO Components.
See All Photos for Quantity, P/N, and Types.
#593 • Vintage Briggs and Stratton Model Y, 4-Cycle Motor.
With Kick Start Pedal. Engine Free and Has Compression. No Spark Plug Boot or Gas Tank as Shown.
#594 • Pitco Model SE14, Dual Basket Commercial Frier.
Overall: 16" x 35" x 40". 208V. 3 Ph. $20 Load Fee.
#595 • New Upwood Air Belt Sander
Belt Size: 20x 520MM.
#596 • (13) Karl Storz Keyboards.
USB Connection.
#597 • Jet Type JET 13R, Benchtop Drill Press With Stand.
1/2 HP. 6-1/2" Throat, 3" Quill Travel with 1/2" Cap. Chuck, 9-1/4" x 9-1/4" Adjustable Height Angle Worktable. Speeds From 500 Up to 2800, Missing Belt Shroud as Shown. 120V. Drill Press Alone Measures: 11" x 24" x 38", with 26-1/2" Height Steel Frame Table. $20 Load Fee.
#598 • (21) New Peter Paul Series 70, Model 71, Solenoid Valves.
See Photos for Part Specifics.
#599 • Machine Slides.
See Photos.
#600 • Assortment of Tools, Hardware, and More.
Please see Pbotos for More Details.
#601 • (1500) 3M R/Y+, Wire Connectors
(15) Bags of (100).
#602 • Assorted Shop Lights and Exit Sign.
.
#603 • Large Number of Avaya Office Phones
Also Includes (2) Conference Room Speaker Phones.
#604 • (46) Cat 50 Tool Holders.
Including: Endmill Type, Collet Type, and Shell Mill Type. $20 Load Fee.
#605 • (3) Kurt D60/D675/D688 Machine Vise Handles.
3/4" Hex Reciever.
#606 • TE Model 687395-8-R, Terminal End Crimper.
With Large Quantity of Crimp Ends.
#607 • Large Quantoty of Bandsaw cutting tool Stock Rolls.
Various Types and Sizes as Shown.
#608 • Eutectic /RotoTec Model 1, paint sprayer
Case Measures: 20" X 4-1/2" x 18".
#609 • Lathe Chip Guard.
8" Wide, 14" at Base of Curvature.
#610 • (2) Stevens Engineering Modular Vise Components.
Including (2) Adjustable Clamping Fixtures, Hardware, And More.
#611 • (3) Partial Spools of 1/8" and 3/16" Stainless Steel Cable.
Quantities Unknown.
#612 • (7) Paper Towel Dispensers
.
#613 • Spool of Waytek PN WDRB14-2 14/2 Brake Cable Gray PVC GPT Conductors - 500 ft and Spool of Waytek PN WG8-0 - 350 ft.
Also Includes 14" Abrasive Cutoff cutting tool and More.
#614 • (8) Elevator Protection Panels.
(6) Approx. 36" x 79". (2) Approx. 48" x 92".
#615 • (9) Cat 40 Tool Holders.
(4) Jacobs 14N. 0-1/2" Cap. (3) Endmill Holders(1) Shell Mill, and (1) Collet Holder.
#616 • (2) EDI Count Down Timers.
Seller States Both Units Need Repair.
#617 • (4) Westermeyer Industries PN LPO Level Probes.
(2) 68", (1) 60" and (1) 48".
#618 • (2) "Danger Hearing Protection.." Sign Boxs and (2) "Danger No Smoking" Sign Boxs
Signs Approx. 14" x 6-1/2".
#619 • Rexroth MRN: R911260475 Type MKD041B-144-KG1-KN 3-Phase Permanent Magnet Motor.
Also Includes Unknown Pinion Gear Assembly.
#620 • Siemens PN: 6SL3120-1TE21-0AA3 Sinamics S120 Single Motor Module.
Input: DC 600V, Output:3AC 400V, 9A. Also Includes Allen-Bradley Cat. No. 2092-PRS8 8- Axis Slim Power Rail.
#621 • (12) Banner PIES46UT Fluoropolymer Encapsulated Fiber Cable 1mm Bundle.
Appears New in Box.
#622 • (8) Aro Pneumatic Cylinders
(4) Approx Stroke: 5-3/8", Diameter Push On: 3/8", and (4) Approx Stroke: 4-1/4", Diameter Push On: 1/4".
#623 • Master Quickdraw Powered Conveyor Components As Shown
.
#624 • Dayton Model 4W622 Hardwood Platform Cart.
Weight Capacity: 2,000 lbs., Approx. 23" Wide, 49" Long. 9" High. Last Day Removal Only.
#625 • 18" Trenchimg Bucket
Appears New. Load Fee $20.00.
#626 • Flow Meter, Tool Balancer and More.
Rosemount Model 8711TSA030U1N0 Magnetic Flowtube. Spring Balancer TW-3 Capacity 1-3 Kg. And More.
#627 • Assorted HSS Drills.
MT Shanks, and More.
#628 • Bohdan Model VB-1A, Control.
24V. 1.5 Amps. Overall: 20-1/2" x 19-1/2" x 8-1/2".
#629 • Large Quantity of Assorted Couplings and More.
Assorted Dodge, and Wood's Couplings, Bushings and More.
#630 • Emerson Motor Drive.
Model M0356120. Approx 8" X 22" X 12".
#631 • Fanuc Servo Motor.
See ID Tag for Motor Specs. Damage to Electrical Cord Screw in as Shown.
#632 • Assorted Cable Assemblies.
See I.D. Tags For Specifics.
#633 • Assorted Stock Items.
Including Over (1000) HNBR90, O-Rings, SMC FEP Tubing. And Spool of Camera Cable.
#634 • Vogel Type Mini5, Spindle Oil/Air Oil Reservoir.
Rebuilt. Overall: 11-1/2" x 7-1/2" x 12".
#635 • Assorted Electrical Boxes.
Assorted Electrical Boxes, Battery Charger and More.
#636 • Falk "UltraMite" Motor Reduction Unit.
Straight Shank with 1-1/4" Output and 1-3/8" Input Keyed Shank. 3.248 Ratio.
#637 • Assorted Electrical Boxes.
Boxes, Power Supplies, and More.
#638 • (5) Bayside Model: RA115-010 Precision Gearheads
Gear Ratio: 10:1.
#639 • Assorted Contactors, Switches, Circuit Breakers, and Indicators.
#640 • (2) Machine Ball Screws.
See I.D. Tags for Additional Specs.
#641 • (24) Omron H3CR, 12 Minute Power Off Delay Switches.
.
#642 • Assorted Flexible Hoses and More
Including Braided, Hydraulic and More.
#643 • Many A-B 1771 Input And Output Modules.
Assorted Allen-Bradley 1771-IBD Input Modules and 1771-ODD Output Modules.
#644 • 5/32" and 1/4" Allen Wrenches.
Bins of 5/32" by 4-1/" and 1/4" by 3-1/2" Allen Wrenches.
#645 • Hunton Limited Surface Facing Grinder.
220/240V. 3 Ph. With 5" 3-Jaw Chuck Mounting Plate. Overall: 16" x 16" x 22". $20 Load Fee.
#646 • Assorted Kurt Machine Vise Repair Kits..
Also Includes Set of Steel 8-1/2" Vise Jaws and Material Stop.
#647 • Assorted Electrical Boxes.
Largest Box Approx 13" X 16" X 6". (3) Approx 8" X 9" X 4.5".
#648 • Asco Red Hat Solenoids.
(6) ASCO Red Hat Series 8262 Solenoids. Plus Valves and Other Items.
#649 • Assorted Electrical Items.
Assorted Ballasts, Switches, Gauges and More.
#650 • Miller Model Spectrum 625 DC Plasma Cutter.
On Rolling Cart with Ground Clamp and Tool. Includes Assorted Tool Perishables. 208/230V. Single Ph. See Data Plate for Specs. Overall Cart and Plasma Cutter Measures: 18" x 30" x 28" Not Including Cart Handle.
#651 • (5) Orion-Tr Smart Non-isolated Dc-Dc Chargers
Appears New in Box.
#652 • (3) Rextin Model: X000ZFVO5L Super Bright 200 pcs, 3 LED Module White 5630 5730
Appear New in Bags.
#653 • (5) Enovation Controls Model: PV485 Powerview Digital Displays.
(3) Appear New in Box.
#654 • Assortment of Stock Material, Hardware and More.
Please See Photos for More Details.
#655 • THK Model 14010 22950 55000: BIF5010HSE-10RRG0+1182LC3: KFK01342 Ball Screw.
Appears to be in Unopened Box. Box Approx. 50"x7"×7".
#656 • Marathon Electric Motor
115- 230 V, Single Phase.
#657 • (3) Graco P/N:203876 Fire-Ball Air-Powered Pumps b
.
#658 • Hose Saw
115 V, cutting tool Diameter: 8".
#659 • (6) Orion-Tr Smart Non-isolated Dc-Dc Chargers
Appears New in Box.
#660 • Dewalt 16" Radial Arm Saw.
3 Ph. Overall: 48" x 44" x 72". $20 Load Fee.
#661 • Work Smart Toolbox, (2) Tripp-Lite24 Plug 120 V 16 A Power Strips and (1) Tripp-Lite 12 Plug 120V 15A Power Strip
.
#662 • Rockwell American Trailer Axles and Hubs.
Includes: (4) No. SPEF60930000B9CR6B 6-Bolt Posi-Lube Equipped Hubs, (2) No. SPEF50800000E9CB 60" Torsion Bar Axles. Note: See Lot 12 for Same Axles and Hubs With Hydraulic Components for Lift/Lower System.. Load Fee: $20.00
#663 • Unistrut Cut-N-Strut Unistrut Channel Cutter.
As Shown, Approx.18"×3"×13".
#664 • (3) Rextin Model: X000ZFVO5L Super Bright 200 pcs, 3 LED Module White 5630 5730
Appear to be New in Bags.
#665 • (16) Applied Motion Products Model: 17PL0160 Servo Motors
.
#666 • Vise Fixture Plate and (5) 3/4" Hex Shank Vise Speed Handles.
Most Speed Handles Missing Multiple Handles. Fixture Plate Believed to Fit Kurt 6" Machine Vises. Plate Measures: 10-1/4" X 15-1/2.
#667 • Timing Pulleys and More.
Timing Pulleys, Assorted Bearings, Flat Belts. And Many Set Screws.
#668 • Assortment of JM Clipper Oil Seals
.
#669 • Kabel Schlepp Energy Chain.
Approx. 9"x4"×120".
#670 • Klutch 16-Ton Hydraulic Pipe Bender.
3" Max Pipe Cap. 90° Max Bending Radius. Includes (8) Bending Dies for Schedule 40 and 80 Black or Galvanized Pipe.
#671 • (23) PHD Pneumatic Cylinders
Approx: Stroke: 3", Bore: 1/2".
#672 • Stereo Microscope Heads.
Unbranded Stereo Microscope Heads. NO Eyepiece Lens.
#673 • Parflange Faring and Flanging System.
115V. Missing Rear Panel.
#674 • Vanguard/Graco Pressure Washer.
Powered by Briggs and Stratton 18 HP, 4 Cycle Engine. Spark Plug Broken off in Boot. But has Compression. Tire Flat as Shown. Overall: 32" x 42" x 36". $20 Load Fee.
#675 • Emerson Motor Drive.
Model M0166120. Emerson Positioning Drive. Approx 8" X 22" X 12".
#676 • (2) X-Axis Baĺl Screw Assemblies for Toyoda FA550.
Boxes Approx. 55"×7"÷7".
#677 • (4) Orion-Tr Smart Non-isolated Dc-Dc Chargers
.
#678 • Toledo No.68 Pipe Threading Machine
115 V.
#679 • ADC CAT# D1M-1A0023 Digital System Cross-Connect Module
Also Includes: (2) Keithley SSIO-24 Solid State Relay Module Accessory Boards and (1) Cyberoptics 5100021-A Rev H Circuit Board.
#680 • Miller Model AEAD-200LE, Gasoline Powered AC/DC Welding Generator.
Powered by Onan Model CCKA-MS Gasoline Engine. 12V. Battery for Electric Start. Power Throttle Position Specs: AC volts: 120/240V. 21/21 Amos, 5 KVA, 1900 RPM. Weld Throttle Position: Volts: 80 AC, 72 DC, Amps: 225 AC, 200 DC, 100% Duty Cycle, 3ppp RPM's. S/N: WHO46967, Overall: 16" x 48" x 38". $20 Load Fee.
#681 • SMC Air Pressure Regulators.
(1) SMC AW20 Regulator with Solenoid Valve. Plus (5) SMC AR20 Regulators with Gauges.
#682 • Allen Bradley Load Switches.
(21) AB 194E-A32-1753 Load Switches and (2) AB 194E-A26-1763 Load Switches.
#683 • SMC Pneumatic Cylinders.
(2) Flat Style Pneumatic Cylinders. Each Approx 3.75" X 10" X 1.5". Approx 7" Travel.
#684 • (50) Applied Motion Products Various Servo Motors
Models: 17PL0100, 17PL0160, HY17.
#685 • Assorted Electrical Equipment.
Medoc VSA-3000 Vibratory Sensory Analyzer. Series 663 Power Control. An OGP Inc Foot Switch. CED 2805SA-8 Analog BNC Box and Small Pelican Case. Approx 7" X 8" X 4".
#686 • Timing Light and Engine Analyzer.
Sears Penske Timing Light and Sears Solid State Engine Analyzer.
#687 • FS Curtis Part Number: FHM9W32BX Hose Saw
115 V, cutting tool Diameter: 10".
#688 • Ingersoll Rand 1/2 Ton Pneumatic Chain Hoist.
With Chain Basket.
#689 • Hobart Model: 1612 Commercial Slicer and More
115 Volt, 5.8 Amp.
#691 • Solar Brand Battery Charger.
No. 1060 Solar Battery Charger. 6 and 12 Volt. 2/10/55 Amp.
#692 • Magnetic Drive Pump.
Sondermann RM-PP-8/60-30 Magnetic Drive Pump. 3-PHASE 208/360 Vac 180 Watt 1.1 Amp. 60 Liters per min.
#693 • Assorted Illuminators.
Illumination Technologies Fiber Optic Flat Beam Emitter. A Lumina and A Weldmatic Illuminator Boxes.
#694 • Various AC Relays.
Please See Photos for More Details.
#695 • Assorted Processing Equipment.
Pipe Heater for Pipe 2-3/8" OD. (2) Leister Air Heaters. (7) Yokogawa SC42-SP34 Conductivity Cells. And Omega PWS-309 Pressue Solenoid.
#696 • 120V. Squirrel Cage Blower.
19-1/2" x 16-1/2" Output Port. Overall: 28" x 28" x 38". $20 Load Fee.
#697 • Kubota ACTV Diesel Engine with Hydraulic Pump Output Shaft.
KUBOTA OC95-D, 8.5 HP Continuous Output. Single Cylinder. With Diesel Tank. Engine Alone Measures: 19" x 18" x 20" Not Including Hydraulic Output Coupling. $20 Load Fee.
#698 • Unknown Lathe Steady Reat.
Approx. 8" to Center. Approx. 4" Max Workholding. See Photos for Additional Fitment Details.
#699 • Craftsman Vise and Clamps.
Small Craftsman Vacuum Base Vise. (5) C-Clamps 1" Capacity. (2) C-Clamps 2" Capacity. AssortedHolders and Magnifyers.
#700 • Gage Pin Set.
0.061" to 0.250" in Plastic Case. Missing 0.160" and 0.170".
#701 • Hardware and Holders.
.
#702 • 8" Diameter Cylinder x Approx 7" Stroke.
With 2" Diameter Threaded Rod, Overall Approx. 8-1/2"×8-1/2"×14".
#703 • Unused Linear Rails & Slides and Ballscrew Assembly.
Listed as Grob Replacement Parts, Includes (2) Rexroth MRN: R182423116 Slides with (2) 32" Rails, (2) THK Item 102302105307000 Slides and Rail Assemblies and (1) Grob No. KGT40-3-25-700-0-1-01 Ballscrew Assembly.
#704 • (4) Diagnostic Tool Kits
(3) Appears New Cummings Inline 6 Standard Kits, (1) Ford VMM Model: 078-00597.
#705 • Ingersoll Rand Model UNB-7TAS-100-L Variable Speed Rotary Screw Air Compressor.
7 HP, 120 Gallon Tank, 220 Volt, 3-Phase, S/N: UE0506U05320. Approx. 68"×28"×58". Load Fee: $20.00
#714 • Shop Made Tool Slide.
Shop Made Tool Slide. Approx Travel 1.50".
#716 • (2) Heidenhain Linear Scale.
Heidenhain LS405 Linear Scale. Travel Approx 13" or 366mm. And LC481-570mm.
#717 • (2) Acopian Power Supplies.
Model: A12MT400 Output 12 Volts 4 A. And Model: A5MT900 Output 5V 9 Amps..
#718 • Assorted Bearings.
(6) SKF 630/8-2RS1, (1) SKF 6212-2RS JEM. (4) INA PAP2020-P10. (3) Nippon Linear Guide Slide Bush SMK-16WVV-E and More.
#719 • Pneumatic System Parts.
PHD, Parker, Festo, Ashcroft, and More.
#721 • (3) Ingersoll Carbide Insert Holders.
(3) Ingersoll 29036821A RO-6430.21. One Box Opened for Pictures.
#722 • (4) Heidenhain Linear Scales.
LS486C ML 570mm, LS487C. ML1020mm, LS486C ML920mm, and LS486C-920mm.
#723 • Assorted Fixture Parts.
See Photos.
#724 • Rubber and Plastic Feet.
(14) Rubber Feet. Load Ratings 80-150 Kgrs. Also Assorted Plastic Feet.
#726 • Assorted Air Regulators.
Parker, SMC, and Numatics Air Regulators.
#727 • Soldering Equipment.
Weller WLC100, Weller D-550, and Hako FX-951. With Solder, and Accessories.
#751 • Boat Winch and Anchor.
12 VDC Boat Anchor Winch System and Anchor.
#570 • Toyoda Double Arm Tool Changers and More for Model FA550.
(1) PN: 29-88200605-201 Changer Assembly, (1) PN: 29-88200605-2 Arm Only, (1) 29-8823600-501 Push Rod and (2) Unknown Drawbar.
#710 • Kwik-Way Model 35-12610 7' Plow cutting tool with Skid Steer Mount.
Needs Hoses, Load Fee: $20.00
#715 • Cable Payout Unit.
No Mfg Information Available, Foot Treadle and Pedal Controls, Approx. 38" Wide Maximum Width, 1 HP, 115-230 Volt, Approx. 65"×80"×53". Load Fee: $20.00
#720 • Sweepster Model MRMAF Front End Mounted Hydraulic Powered Sweeper/Broom.
Sweep Width: 60", Brush Diameter: 24", Mount as Shown, Overall Approx. 64"×42"×30". Load Fee: $20.00
#730 • General Model 550 Dig-R-Mobile Towable Hole Digger.
Tecumseh Model TVM195 150258E Formula 8 Engine, Includes Assorted Drilling Accessories as Shown, Main Drills are 3" Diameter, 1-7/8" Trailer Coupler, S/N: 55001581, Approx. 58"×87"×92".
#725 • Trencher cutting tool, Approx. 64"×57"×4".
Load Fee: $20.00
#745 • (5) Trencher cutting tool.
Approx. 25"×46"×2". Sizes Vary. Load Fee: $20.00
#740 • Target PAC III 14" Cement Saw on A Metal Skid With Water Tank and Pump/Hose System.
PAC III has a Honda GX340 11 HP Motor, Pump has a Honda GX120 4 HP Motor and Honda Model WP20X Pump. Unknown Length of Hose, Water Tank is Approx. 130 Gallons. AlsoIncludes Ramps for Saw, Overall Approx. 90"×48"×60". Load Fee: $20.00 onto Flatbed Trailer/Truck with No Sides.
#707 • Craftsman Model: 536 88520 Smowblower
3.8 HP.
#706 • BallantineTrencher Chain, Sprocket and Idler Pully.
Chain Approx. 4-1/2" Wide Base Plate x 16' Long, Idler is Approx. 16" Diameter x 2-1/2", Sprocket Approx. 11" Diameter. Load Fee: $20.00
#735 • Tennant Model 186E Walk Behind Floor Sweeper.
24 VDC, Approx. 36"×60"×37" and 760 lbs. Click "Documents" Tab for a Manual on this Sweeper. Load Fee: $20.00
#708 • Multi Groove V-Belt Pully
Approx. 19-3/4" x 2-3/4".
#709 • Record Coronet Power Model: CLC3 Wood Turning Lathe with 3/4" Chuck
115 V.
#711 • Parker No. EL-50-S0, PB15549-007 Believed to be a Maximator Air Driven Liquid Pump.
8370 W. 35W Service Drive NE
Blaine, MN
55449
Hobbyist machine and blacksmith shop online auction offering a 16’enclosed double axle car hauler, 2023 Harley-Davidson FLHTK motorcycle, 2009 Suzuki Hayabusa GSX1300R sport bike, Magic chef small appliances, group of vintage Ford transmissions and wheels as well as gearbox parts, Innova 3100 abs, group of hand tools, leather upholstered couch and more. Auction begins to close on 14th of July at 10:00am CT.
Rural Lafayette, MN Estate Online Only Auction 76 featuring a 2021 Case SV280B skid steer w/84” bucket, Ashley “Dunleith” sectional sofa w/ power recliners, Generac 6500W gas generator w/ electric start, Milwaukee fuel M18 cordless grass trimmer, portable sticker burner reverse flow smoker on wheels, Yeti Tundra 110 chest cooler, large Big Green egg grill w/ waterproof cover, new Google Nest learning thermostat, and more. Auction ends July 22 at 7:00pm CT.
This Fergus Falls relocation auction is held live onsite on July 7 at 4:30pm CT at 317 North Union Ave, Fergus Falls, MN. Auction includes classic resto-mod 1968 Ford Mustang, new Kubota compact tractor, shop equipment, lawn & garden equipment, portable car lift, jacks, dollies, utility trailers, DeWalt/Milwaukee/other power tools, fishing, golf clubs, camping, boating, Harley Davidson accessories, furniture and more!