The Koniak Lumber, Tools & Building Materials Auction
Bidding begins to close on August 29th at 6:00pm CT
605 South 8th Street – Benld, IL
NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.
Open House / Preview - August 21st from 2:00pm – 5:00pm CT
There will be no shipping on large or bulk building materials. Shipping will be available on smaller lots that can be transported back to the Aumann Auction facility in Nokomis with transportation and hauling fees starting at $15 for small items and $300 for palleted lots.
PICK UP DAYS - MULTIPLE DAYS SO PLEASE MAKE NOTE!
Tools & Building Materials, Misc are to be picked up on Monday August 31st from 9-2pm
Lumber is to be picked up on Tuesday Sept 1st 12-5pm, LOTS 1-9 (including A lots like 1B or 4F)
We must split it up due to limited room for removal from the building
Take advantage of the preview day to inspect the items before placing your bids.
Whether you're a contractor, builder, handyman, farmer, or DIY enthusiast, don't miss this outstanding online auction featuring a wide variety of lumber, tools, equipment, and building materials.
10% Buyers Premium
Lot 1: Walnut Lumber Board, 3 inch x 10 inch x 8 foot
A single piece of walnut lumber measuring approximately 3 inches thick, 10 inches wide, and 8 feet long. The board is marked as 20 board feet. Features a rough-sawn surface texture and a visible split at one end.
Lot 1A: Walnut Lumber Board, 2-inch x 13-inch x 6-foot 6-inch
A single piece of walnut lumber measuring approximately 2 inches thick, 13 inches wide, and 6 feet 6 inches long. The board is marked as 14.08 board feet. The wood features a visible split running along a portion of the length.
Lot 1B: Walnut Lumber Board, 1.5 inch x 10 inch x 9.5 feet
A single board of walnut lumber measuring approximately 1.5 inches in thickness, 10 inches in width, and 9 feet 6 inches in length. The board is marked as 11.87 board feet.
Lot 1C: Walnut Lumber Boards, 3-Piece Set
A set of three walnut lumber boards. Each board measures approximately 3/4 inch thick, 13 inches wide, and 7.5 feet long, with a total volume of 18.28 board feet.
Lot 1D: Walnut Lumber Boards
A lot consisting of walnut lumber boards. Each board measures approximately 3/4 inch in thickness, 5 inches in width, and 8 feet 6 inches in length. The boards feature natural grain patterns and include some knots as shown in the provided images.
Lot 1E: Walnut Lumber Boards, Approximately 21.77 Board Feet
A collection of walnut lumber boards, totaling approximately 21.77 board feet. The lot consists of 10 boards, each measuring approximately 3/4 inch thick, 5 1/2 inches wide, and 6 feet 4 inches long. The boards feature natural edges and visible wood grain patterns.
Lot 1F: Lot of 10 Walnut Lumber Boards
A collection of 10 walnut lumber boards. Each board measures approximately 1 inch thick, 5.5 inches wide, and 6 feet 6 inches long. The total volume is approximately 29.79 board feet.
Lot 1G: Lot of 10 Walnut Lumber Boards
A collection of 10 walnut lumber boards. Each board measures approximately 3/4 inch thick, 6 1/2 inches wide, and 7 feet 6 inches long. The total volume is approximately 30.47 board feet.
Lot 1H: Walnut Lumber Boards, 10 Count
A lot containing 10 walnut boards. Each board measures approximately 3/4 inch thick, 7 inches wide, and 7 feet long. The total volume is 30.62 board feet.
Lot 1I: Walnut Lumber Boards, 8 Pieces
A collection of 8 walnut lumber boards. Each board measures approximately 3/4 inch thick, 7 inches wide, and 7 feet 6 inches long. The total volume is approximately 26.25 board feet.
Lot 1J: Assorted Hardwood Lumber Boards
A collection of various hardwood lumber boards, including multiple planks of varying lengths and widths. The lot features a mix of sawn boards and live-edge pieces, suitable for woodworking projects. Items are presented as a single lot as shown in the photographs. Mixed lot of various thicknesses and sizes of walnut. Bottom 2 boards in the picture are not included
Lot 1K: Assorted Walnut Lumber Planks
A collection of walnut wood planks featuring varying dimensions and thicknesses. The lot includes boards with natural edges and varying grain patterns, suitable for woodworking and craft projects. Mixed lot of various sizes and thicknesses of walnut
Lot 1L: Walnut Lumber Boards, 4 Pieces
A lot consisting of four walnut boards. Each board measures approximately 3/4 inch thick, 5 1/2 inches wide, and 7 feet long. The total volume is approximately 12.25 board feet.
Lot 1M: Walnut Lumber Board 1.75 Inch x 7 Inch x 8 Foot
A single piece of walnut lumber measuring 1.75 inches in thickness, 7 inches in width, and 8 feet in length. The board contains approximately 8.16 board feet.
Lot 2: Bundle of 12 Rough-Sawn Lumber Boards, 1 inch x 7 inches x 6 feet
A collection of 12 rough-sawn lumber boards. Each board measures approximately 1 inch in thickness, 7 inches in width, and 6 feet in length. The total volume of the bundle is approximately 42 board feet.
Lot 2A: Oak Lumber Boards, 15 Pieces
A collection of 15 oak lumber boards. Each board measures approximately 6 feet in length, 6 inches in width, and 3/4 inch in thickness. The total volume of the lot is approximately 33.75 board feet.
Lot 2B: Oak Lumber Boards, 7 Pieces, 6 Feet Long
A lot of 7 oak boards, each measuring approximately 6 feet in length, 7.5 inches in width, and 3/4 inch in thickness. The total volume for this lot is 19.68 board feet.
Lot 2C: Oak Lumber Boards, 14 Pieces
A lot consisting of 14 oak boards. Each board measures approximately 1 inch thick, 6 feet in length, and 7.5 inches in width. The total volume is approximately 52.5 board feet.
Lot 2D: Lot of 10 Oak Boards, 3/4 Inch Thick, 6 Feet Long
This lot includes 10 oak boards, each measuring 3/4 inch in thickness, 6 feet in length, and 5 1/2 inches in width. The total volume is approximately 20.62 board feet.
Lot 2E: Assorted Oak Lumber Boards, 17.97 Total Board Feet
A collection of three oak lumber boards. The lot includes one board measuring 1.25 inches thick by 6.5 inches wide by 66 inches long, and two boards measuring 1.5 inches thick by 9.5 inches wide by 72 inches long. The total volume is 17.97 board feet. One board exhibits a longitudinal split.
Lot 2F: Stack of 8 Oak Boards, 1 Inch Thick, 9 Inches Wide, 6 Feet Long
A lot consisting of 8 oak boards. Each board measures approximately 1 inch in thickness, 9 inches in width, and 6 feet in length. The total volume for the lot is 36 board feet.
Lot 2G: Oak Lumber Boards, 11 Pieces
A collection of 11 oak boards. Each board measures approximately 3/4 inch in thickness, 7 1/2 inches in width, and 6 feet in length. The total volume is approximately 30.94 board feet. The lumber features natural grain patterns and live edges.
Lot 2H: Oak Lumber Assortment, 32.5 Board Feet
A collection of oak lumber boards with varying dimensions. The lot includes five boards measuring approximately 1 inch thick by 5.5 inches wide by 6 feet long, and five boards measuring approximately 1 inch thick by 7.5 inches wide by 6 feet long. The total volume is 32.5 board feet.
Lot 2I: Oak Lumber Boards, Approximately 24.75 Board Feet
A collection of approximately 12 oak boards. Each board measures 3/4 inch thick, 5 1/2 inches wide, and 6 feet long. The total volume is approximately 24.75 board feet. The lumber features natural grain patterns and includes some live edge sections.
Lot 2J: Assorted Oak Lumber Boards, 22.86 Board Feet
A collection of oak lumber boards totaling approximately 22.86 board feet. The lot includes seven boards measuring approximately 3/4 inch thick by 5 1/2 inches wide by 6 feet long, and three boards measuring approximately 3/4 inch thick by 7 1/2 inches wide by 6 feet long.
Lot 2K: Oak Lumber Boards, Approximately 24 Board Feet
A collection of oak lumber boards, consisting of approximately 8 pieces. Each board measures 1 inch in thickness, 6 inches in width, and 6 feet in length, totaling approximately 24 board feet.
Lot 2L: Oak Lumber Boards, 12 Pieces, 1 Inch x 7 Inches x 6 Feet
A collection of 12 oak lumber boards. Each board measures approximately 1 inch thick, 7 inches wide, and 6 feet long. The total volume is approximately 42 board feet.
Lot 3: Oak Lumber Boards, 14 Pieces
A lot consisting of 14 oak boards. Each board measures approximately 0.75 inches thick, 5 inches wide, and 8.5 feet long. The total volume is approximately 37.19 board feet.
Lot 3A: Oak Lumber Boards, 14 Pieces
A lot of 14 oak boards. Each board measures approximately 3/4 inch thick, 5 inches wide, and 8 feet 6 inches long. The total volume is approximately 37.19 board feet. Note that some boards exhibit splintering and structural damage at the ends.
Lot 3B: Oak Lumber Boards, 14 Pieces
A lot consisting of 14 oak boards. Each board measures approximately 3/4 inch thick, 5 inches wide, and 8 feet 6 inches long. The total volume is approximately 37.19 board feet.
Lot 3C: Oak Lumber Boards, 14 Pieces, 1 Inch x 5 Inches x 8 Feet 6 Inches
A lot consisting of 14 oak boards. Each board measures 1 inch in thickness, 5 inches in width, and 8 feet 6 inches in length. The total volume is approximately 49.58 board feet.
Lot 3D: Lot of 14 Oak Boards, 1 Inch Thick by 5 Inches Wide by 8 Feet 6 Inches Long
A collection of 14 oak boards. Each board measures approximately 1 inch in thickness, 5 inches in width, and 8 feet 6 inches in length. The total volume is approximately 49.58 board feet.
Lot 3E: Oak Lumber Boards, 12 Pieces, 1 Inch x 5.5 Inch x 8.5 Feet
A lot consisting of 12 oak boards. Each board measures approximately 1 inch thick, 5.5 inches wide, and 8.5 feet in length. The total volume is approximately 46.75 board feet.
Lot 3F: Oak Lumber Boards, 14 Pieces
A lot of 14 oak boards, each measuring approximately 1 inch thick, 5 inches wide, and 8 feet 6 inches long. The total volume is approximately 42.5 board feet.
Lot 3G: Lot of Five Oak Boards, 1/2 Inch Thick by 7 Inches Wide by 7 Feet 6 Inches Long
A lot consisting of five oak boards. Each board measures approximately 1/2 inch in thickness, 7 inches in width, and 7 feet 6 inches in length. The total volume for the lot is approximately 10.93 board feet.
Lot 3H: Lot of 14 Oak Boards, Approximately 1 Inch Thick, 7 Inches Wide, 9 Feet Long
This lot consists of 14 oak boards. Each board measures approximately 1 inch in thickness, 7 inches in width, and 9 feet in length. The total volume is approximately 73.5 board feet. The lumber features natural grain patterns and knots as shown in the provided images.
Lot 3I: Assorted Dimensional Lumber Lot, 32.57 Board Feet
A lot of dimensional lumber consisting of one board measuring 1 inch thick by 5 inches wide by 8 feet 6 inches long, and two boards measuring 2 inches thick by 6.5 inches wide by 8 feet 6 inches long. The total volume for this lot is 32.57 board feet.
Lot 3J: Lot of 14 Oak Lumber Boards
A collection of 14 oak lumber boards. Each board measures approximately 1 inch thick, 5.5 inches wide, and 8 feet long. The total volume is approximately 56.15 board feet.
Lot 3K: Oak Lumber Boards, 14 Pieces
A lot of 14 oak boards. Each board measures approximately 1 inch thick, 5.5 inches wide, and 8 feet 9 inches long. The total volume is approximately 56.15 board feet.
Lot 3L: Oak Lumber Boards, 14 Pieces
A lot consisting of 14 oak boards. Each board measures approximately 3/4 inch thick, 5 1/2 inches wide, and 8 feet 9 inches long. The total volume is approximately 42.11 board feet.
Lot 3M: Lot of 19 Oak Lumber Boards
A collection of 19 oak boards. Each board measures approximately 1 inch in thickness, 5.5 inches in width, and 8 feet 9 inches in length. The total volume is approximately 57.15 board feet. Some pieces feature live edges.
Lot 4: Cherry Wood Board, 1.5 inch x 9.25 inch x 105 inch
One piece of cherry lumber measuring approximately 1.5 inches thick, 9.25 inches wide, and 8 feet 9 inches (105 inches) long. The board features natural wood grain and includes a knot as shown in the provided images.
Lot 4A: Cherry Wood Board, 1.5 Inch x 11.5 Inch x 56 Inch
A single cherry wood board measuring approximately 1.5 inches thick, 11.5 inches wide, and 56 inches long. The board is calculated at 7.90 board feet. Features natural wood grain and texture as shown in the provided images.
Lot 4B: Cherry Lumber Boards, 6-Piece Lot
A lot consisting of 6 cherry wood boards. The boards measure approximately 3/4 inch thick, 10 1/2 inches wide, and 5 feet 6 inches long. The total volume is approximately 21.66 board feet. The lot includes pieces with natural live edges and visible wood grain characteristics.
Lot 4C: Cherry Wood Boards, 6-Piece Set
A collection of 6 cherry wood boards. Each board measures approximately 3/4 inch thick, 10 inches wide, and 4 feet 9 inches long. The total volume is 17.81 board feet. The boards feature natural knots and variations in the wood grain.
Lot 4D: Cherry Wood Lumber Boards, 8-Piece Lot
A lot consisting of 8 cherry wood boards. Each board measures approximately 5 feet 4 inches in length, 10.5 inches in width, and 0.75 inches in thickness. The total volume for the lot is approximately 28 board feet.
Lot 4E: Cherry Lumber Boards, 10 Count, 31.17 Total Board Feet
A lot of 10 cherry wood boards. Each board measures approximately 3/4 inch thick, 10 1/2 inches wide, and 4 feet 9 inches long. The total volume for the lot is 31.17 board feet.
Lot 4F: Cherry Lumber Boards, 11 Pieces
A collection of 11 cherry wood boards. Each board measures approximately 3/4 inch thick, 4 inches wide, and 8 feet 3 inches long. The total volume is approximately 22.68 board feet.
Lot 4G: Set of Six Cherry Wood Boards
A collection of six cherry wood boards. Each board measures approximately 3/4 inch in thickness, 5 1/2 inches in width, and 8 feet in length. The total volume is approximately 16.5 board feet.
Lot 4H: Lot of 6 Cherry Wood Boards
A collection of 6 cherry wood boards. The lot includes 2 boards measuring approximately 3/4 inch thick, 6 1/4 inches wide, and 5 feet 6 inches long, and 4 boards measuring approximately 3/4 inch thick, 6 1/4 inches wide, and 6 feet 9 inches long. The total volume is approximately 14.83 board feet. Some boards feature live edges with bark.
Lot 4I: Cherry Lumber Boards, 8 Pieces
A lot consisting of 8 cherry wood boards. Each board measures approximately 3/4 inch thick, 9 1/4 inches wide, and 8 feet long. The total volume is approximately 37 board feet.
Lot 4J: Collection of 11 Cherry Wood Boards
A collection of 11 cherry wood boards. The lot includes boards with approximate dimensions of 3/4 inch thickness, 8 1/2 inches in width, and 6 feet in length, as well as boards measuring approximately 3/4 inch in thickness, 7 1/4 inches in width, and 7 feet in length. The total volume is approximately 27 board feet.
Lot 4K: Collection of Seven Cherry Wood Boards
A lot consisting of seven cherry wood boards with a total volume of approximately 24 board feet. The lot includes two boards measuring 1/2 inch thick by 8 1/2 inches wide by 7 feet 4 inches long; one board measuring 1 inch thick by 8 inches wide by 6 feet 9 inches long; and four boards measuring 3/4 inch thick by 8 inches wide by 6 feet 9 inches long.
Lot 4L: Cherry Lumber Assortment, 13 Boards
A collection of 13 cherry wood boards. The lot includes a mix of dimensions as noted on the attached tag: 3 boards measuring 3/4 inch thick, 7 1/2 inches wide, and 5.4 feet long; and 10 boards measuring 3/4 inch thick, 7 inches wide, and 9 feet long. The total volume is 47.47 board feet. The boards feature natural grain patterns and some knots.
Lot 4M: Cherry Lumber Boards, 8 Pieces
A lot consisting of 8 cherry wood boards. Each board measures approximately 1 inch thick, 7.25 inches wide, and 11 feet 4 inches long. The total volume is 54.78 board feet.
Lot 5: Assorted Oak Lumber Boards, 28.12 Total Board Feet
A collection of oak lumber boards totaling 28.12 board feet. The lot includes 10 boards measuring 3/4 inch thick, 7 inches wide, and 5 feet long, as well as 4 boards measuring 3/4 inch thick, 10 inches wide, and 4 feet long.
Lot 5A: Assorted Dimensional Lumber Lot
A collection of dimensional lumber boards. The lot includes one board measuring 7' x 7.5" x 1", seven boards measuring 9' x 7.5" x 1", and two boards measuring 9' x 8.5" x 0.75". The total approximate volume is 53.30 board feet. Unknown species of various wood boards
Lot 5B: Lumber Boards, 11 Pieces, Approximately 3/4 Inch x 8 Inch x 9 Feet 6 Inches
A lot consisting of 11 wooden boards. Each board measures approximately 3/4 inch in thickness, 8 inches in width, and 9 feet 6 inches in length. The total volume is approximately 52.25 board feet. The boards exhibit natural wood grain, knots, and some surface irregularities. Various species of wood boards
Lot 5C: Lumber Boards, 1 Inch Thick, 9.25 Inches Wide, 9 Feet Long, Set of 4
A set of four wooden boards, each measuring approximately 1 inch in thickness, 9.25 inches in width, and 9 feet in length. The total volume is listed as 27.75 board feet. The lumber features natural grain patterns and surface variations.
Lot 5D: Bundled Rough-Sawn Lumber Planks
A collection of rough-sawn wooden planks, bundled together. The lumber features natural grain patterns, surface variations, and visible texture consistent with raw timber processing.
Lot 5E: Assorted Dimensional Hardwood Lumber Stack
A collection of various lengths and widths of sawn hardwood lumber. The stack includes multiple boards of varying thicknesses, suitable for woodworking or construction projects. The material is presented in a raw, unfinished state.
Lot 5F: Assorted Natural Edge Wood Slabs and Lumber
A collection of raw wood materials including several natural edge slabs and various cut lumber pieces. The lot features mixed dimensions and grain patterns, suitable for woodworking projects.
Lot 5G: Assorted Rough-Sawn Hardwood Lumber Planks
A collection of rough-sawn hardwood planks featuring natural grain patterns and live edges. The lot includes multiple boards with varying dimensions as noted on the attached inventory tag: one board approximately 3/4 inch thick, 7 inches wide, and 6 feet 6 inches long; and one board approximately 3/4 inch thick, 8 1/2 inches wide, and 6 feet 6 inches long. The lumber exhibits characteristic wood markings and textures.
Lot 5H: Assorted Dimensional Lumber Boards
A collection of raw lumber boards featuring natural wood grain and knots. The lot includes approximately 10 boards measuring 3/4-inch thick, 5 1/2 inches wide, and 6 feet 6 inches long, as well as 3 boards measuring 3/4-inch thick, 8 1/4 inches wide, and 6 feet 4 inches long. Measurements are approximate.
Lot 5I: Assorted Rough-Sawn Hardwood Lumber Planks
A collection of rough-sawn hardwood planks featuring natural grain patterns and live-edge characteristics. The lot includes various dimensions as noted on the attached inventory tags: one set measuring approximately 0.5 inches thick, 8 inches wide, and 5 feet 6 inches long; and another set measuring approximately 0.5 inches thick, 5.5 inches wide, and 7 feet long. These boards are suitable for woodworking, furniture construction, or craft projects.
Lot 5J: Hickory Lumber Boards, Approximately 3/4 Inch Thick
A collection of hickory lumber boards. Each board measures approximately 3/4 inch in thickness, 5 1/2 inches in width, and 6 feet 8 inches in length. The wood features natural grain patterns and knots.
Lot 5K: Hickory Lumber Assortment
A collection of raw hickory lumber boards. The lot includes two boards measuring approximately 3/4 inch thick, 3 3/4 inches wide, and 5 feet 6 inches long. Additionally, the lot includes 15 boards measuring approximately 3/4 inch thick, 3 1/2 inches wide, and 6 feet 9 inches long. Boards feature natural grain patterns and knots.
Lot 5L: Hardwood Lumber Board, 2-inch x 12-inch x 6-foot
A single piece of sawn hardwood lumber measuring approximately 2 inches thick, 12 inches wide, and 6 feet in length. The board features a natural grain pattern and rough-sawn edges.
Lot 5M: Lumber Boards, Approximately 3/4 Inch Thick, 5 1/2 Inches Wide, 5 Feet 4 Inches Long
A collection of wooden boards featuring natural grain patterns and variations. Each board measures approximately 3/4 inch in thickness, 5 1/2 inches in width, and 5 feet 4 inches in length. The boards exhibit raw edges and surface characteristics consistent with unfinished lumber.
Lot 5N: Rough Sawn Lumber Board, 1.5 inch x 10 inch x 5.5 feet
A single piece of rough sawn lumber measuring approximately 1.5 inches in thickness, 10 inches in width, and 5.5 feet in length. The board features natural wood grain and surface characteristics consistent with raw timber stock.
Lot 5O: Hardwood Lumber Board 1.5 Inch x 11 Inch x 6.5 Feet
A single piece of milled hardwood lumber. The board measures approximately 1.5 inches in thickness, 11 inches in width, and 6.5 feet in length. The item features a natural wood grain and square-cut ends.
Lot 5P: Natural Edge Wood Slab 64-inch x 21-inch
A single piece of raw wood slab featuring a natural edge. The dimensions are approximately 1.5 inches thick, 21 inches wide, and 64 inches long. The slab exhibits natural grain patterns, knots, and surface irregularities consistent with raw lumber.
Lot 5Q: Two Live Edge Wood Slabs, 3/4 Inch Thick
A set of two live edge wood slabs featuring natural grain patterns and knots. Each slab measures approximately 3/4 inch in thickness, 19 inches in width, and 6 feet 9 inches in length.
Lot 5R: Assorted Rough-Cut Wood Slabs
A collection of rough-cut wood slabs featuring natural edges and varying dimensions. The lot includes multiple pieces with handwritten measurements on the surfaces, indicating thicknesses of 1 inch and 3/4 inch, widths ranging from 20 inches to 22.5 inches, and lengths of 5 feet 2 inches and 6 feet. The slabs exhibit natural wood grain, knots, and surface markings.
Lot 5S: Two Live Edge Wood Slabs, 1 Inch Thick
A set of two live edge wood slabs. Each slab measures 7 feet 4 inches in length. One slab is 20 inches wide and the other is 21 inches wide. Both slabs are 1 inch thick.
Lot 5T: Bookmatched Wood Slabs and Lumber Assortment
A collection of raw wood slabs and lumber, including a prominent bookmatched pair featuring natural grain patterns and knots. The lot includes multiple pieces of varying widths and lengths. According to the provided documentation, the primary slabs measure approximately 3/4 inch thick, 10 1/2 inches wide, and 5 feet 3 inches long. Items are presented as raw material for woodworking projects.
Lot 5U: Assorted Hardwood Lumber Slabs, Various Dimensions
A collection of raw hardwood lumber slabs featuring natural edges. The lot includes the following pieces as indicated by the attached inventory tag: two boards measuring 1 inch thick by 12 inches wide by 4 feet 8 inches long; two boards measuring 1.25 inches thick by 12 inches wide by 6 feet long; and one board measuring 1.5 inches thick by 10.5 inches wide by 6 feet long.
Lot 5V: Set of Three Live Edge Wood Slabs
A collection of three unfinished live edge wood slabs featuring natural grain patterns and irregular edges. The pieces exhibit varying widths and lengths, with some surface markings and natural wood characteristics present. These slabs are suitable for woodworking projects, furniture making, or decorative applications.
Lot 5W: Assorted Rough-Sawn Hardwood Lumber Boards
A collection of multiple rough-sawn hardwood boards featuring natural live edges and varying grain patterns. The lot includes several planks of differing widths and lengths, suitable for woodworking projects, furniture construction, or craft applications.
Lot 5X: Assorted Live Edge Hardwood Lumber Planks
A collection of multiple live edge hardwood lumber planks featuring natural grain patterns, knots, and varying widths. The boards are unfinished and display raw edges, suitable for woodworking projects, furniture construction, or decorative applications.
Lot 5Y: Assorted Live Edge Hardwood Lumber Planks
A collection of multiple live edge hardwood lumber planks featuring natural edges and visible wood grain characteristics. The lot includes various lengths and widths, suitable for woodworking, furniture construction, or craft projects. The boards exhibit natural knots and variations in texture.
Lot 5Z: Assorted Rough-Sawn Hardwood Lumber Planks
A collection of multiple rough-sawn hardwood planks of varying lengths and widths. The lot includes boards with natural live edges and square-cut edges, suitable for woodworking projects. Items are presented as shown in the images.
Lot 6: Stacked Hardwood Lumber Boards
A collection of stacked hardwood lumber boards. The lot consists of multiple rectangular planks of varying lengths and widths, suitable for woodworking or construction projects.
Lot 6A: Assorted Rough-Sawn Hardwood Lumber Planks
A collection of multiple rough-sawn hardwood planks of varying lengths and widths. The lot includes several boards, with some pieces marked as oak. The lumber features natural edges, varying grain patterns, and surface textures consistent with raw, unfinished timber.
Lot 6B: Assorted Live Edge Wood Slabs, Lot of 8
A collection of eight raw, live edge wood slabs featuring natural grain patterns, knots, and irregular edges. These pieces are suitable for woodworking projects, furniture construction, or decorative applications. The lot includes various lengths and widths as shown in the provided images.
Lot 6C: Assorted Hardwood Lumber and Timber Slab Lot
A collection of assorted hardwood lumber, including various dimensional boards and a single large timber slab with natural edge. The lot consists of multiple pieces of varying lengths and thicknesses, suitable for woodworking projects.
Lot 6D: Assorted Dimensional Lumber Stack, Barn Board
A collection of various lengths and widths of dimensional lumber boards, stacked and secured. The lot includes multiple pieces of raw wood material suitable for construction or woodworking projects.
Lot 7: Bundle of Dimensional Lumber
A collection of dimensional lumber pieces bundled together. The lot includes multiple lengths of light-colored wood, suitable for various construction or woodworking projects.
Lot 8: Assorted Hardwood Lumber and Live Edge Slab Lot
A collection of assorted hardwood lumber, including various cut boards, dimensional blocks, and a single live edge slab. The items are bundled. The lot includes multiple lengths and thicknesses of wood suitable for woodworking projects.
Lot 9: Assorted Cherry Wood Lumber and Trim Pieces
A collection of assorted cherry wood lumber, including various lengths of boards and shaped trim pieces. The wood is stacked and secured with banding.
Lot 10: Aerospace America Aero-Clean 2000 Portable Air Filtration System
Portable air filtration unit manufactured by Aerospace America, Environmental Division. Features a metal housing, integrated control panel with pressure gauge, hour meter, and electrical outlet. Includes operating instructions and technical specifications for power requirements and filter pressure drop on the exterior casing. Unit is designed for industrial or environmental air cleaning applications.
Lot Location: Middle room
Lot 11: Yard Machines by MTD Electric Log Splitter
A Yard Machines by MTD electric log splitter featuring a 20-inch log capacity. The unit is mounted on a frame with two wheels for mobility and includes an integrated safety warning label and control handle.
Lot Location: Middle room
Lot 12: Craftsman 10-Inch Radial Arm Saw on Metal Stand
A Craftsman 10-inch radial arm saw mounted on a metal work stand. The unit features a motor assembly with a blade guard, adjustable yoke pivot latch, and a power switch with a removable yellow safety key. The saw is supported by a four-legged metal base. Saw only - no additional contents included shown in picture
Lot Location: Middle room
Lot 13: Craftsman Commercial Duty Edger/Trimmer
A Craftsman commercial duty walk-behind edger/trimmer featuring a gasoline engine, adjustable blade angle settings, and a metal cutting blade with a safety guard. The unit includes a handle-mounted control lever for operation.
Lot Location: Middle
Lot 14: Campbell Hausfeld Electric Pressure Washer 1500 PSI
Campbell Hausfeld electric pressure washer, model PW1380, featuring 1500 PSI and 1.7 GPM output. Includes spray wand, hose, and power cord. Unit is blue and black with integrated handle and storage features.
Lot Location: Middle
Lot 15: Craftsman Electric Lawn Mower Model 663.370300
Craftsman electric walk-behind lawn mower, model number 663.370300, serial number 209140. Features a 12-amp motor, 110-120 volt power requirement, and blade brake control system. Includes integrated grass collection housing and adjustable handle.
Lot Location: Middle
Lot 15A: Yard King 26-Inch Walk-Behind Lawn Mower with 6.5 HP Briggs & Stratton Intek Engine
This Yard King walk-behind lawn mower features a 26-inch cutting deck and is powered by a 6.5 HP Briggs & Stratton Intek OHV engine. The unit includes adjustable walking speed and engine speed controls, as well as adjustable cutting height settings.
Lot Location: Middle
Lot 16: Work Bench with Integrated Storage Drawers and Cabinets
A multi-section work bench featuring a particle board top surface and a base unit equipped with multiple drawers and cabinet doors. The base cabinet doors are finished with a wood-grain laminate and decorative trim, featuring metal hardware and clear knobs. The unit provides storage space with internal shelving.
Lot Location: Middle
Lot 17: Toro S-200 Electric Start Snow Blower
A Toro S-200 snow blower featuring an electric start system. The unit includes a two-cycle engine requiring a 32: 1 fuel-to-oil mixture. The control panel provides access to the ignition switch, primer, choke, and electric starter button. The machine is equipped with a discharge chute and a Toro-branded collection bag.
Lot Location: Middle
Lot 18: Set of Two Screw Jacks and Metal Mounting Bracket
This lot includes two heavy-duty screw jacks featuring adjustable tops and integrated side handles, accompanied by a metal mounting bracket assembly with adjustable hardware. The items are constructed from steel and are suitable for industrial or workshop applications.
Lot Location: Middle
Lot 19: Assorted Collection of Long-Handled Garden and Farm Tools
A bundle of various long-handled manual tools, including multiple shovels, a garden hoe, and a pitchfork. The set features wooden handles with metal heads of differing shapes and sizes, suitable for agricultural or landscaping tasks.
Lot Location: Middle
Lot 20: Assorted Hand Tools and Shovels Collection
A collection of various hand tools including multiple shovels with wooden handles, a metal snow shovel, and a post hole digger. The set features tools with various handle designs, including D-grip and T-handle configurations. Brands identified on tool heads include Blue Grass and Ames.
Lot Location: Middle
Lot 21: Collection of Homelite Chainsaws and Remington Limb N Trim Saw
A lot of outdoor power equipment including multiple Homelite chainsaws, specifically models 3514C and others, and one Remington Limb N Trim electric saw. The lot includes several units housed in a cardboard container and loose units as shown in the images. Unknown working conditions
Lot Location: Middle
Lot 21A: Collection of Three Homelite Gas-Powered Chainsaws
A lot consisting of three Homelite gas-powered chainsaws, featuring red housings and black handles. The units include various bar lengths and chain configurations. These tools are designed for wood cutting and forestry applications.
Lot Location: Middle
Lot 21B: Assorted Gasoline Containers, Including Metal Huffy Can
A collection of three gasoline storage containers. The set includes one metal one-gallon gasoline can manufactured by Huffy in Dayton, Ohio, featuring a pour spout, and two plastic gasoline jugs of varying capacities.
Lot Location: Middle
Lot 22: Assorted Lawn and Garden Power Tools and Hand Tool Caddy
A collection of lawn and garden equipment including a Black & Decker electric edger and trimmer, an electric hedge trimmer attachment, and a yellow plastic tool caddy containing various hand tools and implements. Also included are two wooden advertising yardsticks.
Lot Location: Middle
Lot 23: Pole Saw with Extension Handles
A manual pole saw assembly featuring a cutting head with a spring-loaded mechanism and rope-operated pulley system. The set includes multiple wooden extension poles with metal coupling sleeves, allowing for adjustable reach. The cutting head is finished in red paint.
Lot Location: Middle
Lot 24: Assorted Metal Poles and Hardware Components for Basement Support
A collection of four cylindrical metal poles of varying lengths and finishes, accompanied by a plastic bucket containing assorted metal plates, brackets, and hardware components. The poles feature pre-drilled holes and threaded ends. Commonly used for support beams in basements
Lot Location: Middle
Lot 25: Industrial Squirrel Cage Fans, Centrifugal Blower Fan with Electric Motor
This lot includes an industrial centrifugal blower fan assembly paired with an electric motor. The unit features a metal housing and a squirrel cage fan design, suitable for ventilation or air movement applications. The motor is mounted to the frame, and the assembly includes electrical conduit wiring. Unknown working conditions
Lot Location: Middle
Lot 26: Hudson Perfection 57310 Stainless Steel Sprayer
A Hudson Manufacturing Company Perfection model 57310 stainless steel tank sprayer. Features a top-mounted handle, attached hose, and original branding label on the exterior. Measures approximately 24 inches in height.
Lot Location: Middle
Lot 27: Folding Utility Tables with Metal Frames
A set of 3 rectangular folding utility tables featuring particle board surfaces and tubular metal frames. The tables are designed with collapsible legs for storage and transport. The surfaces show signs of surface wear and material degradation. 3 tables
Lot Location: Middle
Lot 27A: Achim TivoliTile Self-Adhesive Vinyl Floor Tiles, Pattern FTVWD220, Multiple Boxes
A collection of Achim TivoliTile self-adhesive vinyl floor tiles. Each box contains 25 tiles, measuring 12 inches by 12 inches, providing 25 square feet of coverage per box. The tiles feature a high-gloss, no-wax finish in pattern FTVWD220 (SKU 8814758). The lot includes multiple factory-packaged boxes. Some boxes may have been opened and count could be off
Lot 28: Westinghouse Type ARS AC Motor with Pump Assembly
A Westinghouse Type ARS AC electric motor paired with a pump assembly. The unit includes associated piping, a mounting bracket, and a pulley component. The motor features a metal identification plate and safety warning labels. The assembly is presented as a single lot.
Lot Location: Middle
Lot 29: Lawn and Garden Maintenance Equipment Lot
A collection of lawn and garden maintenance tools including a Hudson pump sprayer, a push-style broadcast spreader, two hose reels, two garden hoses, and a Paramount PB100 electric leaf blower.
Lot Location: Middle
Lot 30: Assorted Garden Tools and Weed Eater 1400 Lawn Trimmer
A collection of garden maintenance tools including a Weed Eater 1400 lawn trimmer, a manual rotary cultivator with a yellow handle, a pickaxe with a wooden handle, and a metal hoe. The set includes various long-handled implements for soil preparation and lawn care.
Lot Location: Middle
Lot 31: Assorted Fluorescent Light Fixtures and Tubes
A collection of multiple fluorescent light fixtures, including various metal housings and associated fluorescent tubes. The lot features a mix of white and grey industrial-style fixtures, some equipped with power cords and plugs. Items are presented as a bulk lot. All fixtures and bulbs are included
Lot Location: Middle back
Lot 32: Campbell Hausfeld Airless Paint Sprayer and Wagner 949 Cordless Painting System
This lot includes a Campbell Hausfeld airless paint sprayer mounted on a wheeled cart, featuring a 7/8 HP motor, .50 GPM capacity, and an attached paint sprayer with hose. Unknown working condition. Also included is a Wagner 949 cordless painting system, which comes with its original packaging and owner's manual.
Lot Location: Front
Lot 33: SprayTech EP2105 Airless Paint Sprayer and Painting Accessory Lot
This lot includes a SprayTech EP2105 airless paint sprayer mounted on a wheeled cart, accompanied by a collection of painting and finishing accessories. The accessory group features a bucket containing various paint roller frames, a Pro-Trim self-masking paint roller kit, multiple trowels, sponges, and assorted roller covers.
Lot Location: Front
Lot 34: Craftsman Model 108.1501 Metal Cutting Power Hacksaw
Craftsman metal cutting power hacksaw, model number 108.1501. Features a belt-driven motor, integrated vise for securing workpieces, and adjustable support stands. Includes power switch and associated hardware as shown in the images.
Lot Location: Front
Lot 35: Highland Park Model E-2 Lapidary Saw
A Highland Park Model E-2 lapidary saw featuring a belt-driven motor configuration. The unit includes a metal base, a cutting table, a blade guard, and a secondary clamping assembly. The machine is equipped with a Dayton electric motor.
Lot Location: Front
Lot 36: Buffalo Brand Model HVMBS-4.5 Metal Cutting Band Saw
Buffalo Brand metal cutting band saw, model HVMBS-4.5, manufactured in 1989. Features a cutting capacity of 4.5 inches round and 4 inches by 6 inches rectangular. Includes a vise with 4 inch by 5 inch capacity, adjustable from 45 to 90 degrees. Equipped with three cutting tool speeds of 80, 120, and 200 FPM. The unit is mounted on a stand and includes a belt-driven motor.
Lot Location: Front
Lot 37: Hillquist Lapidary Slab Saw with Stand
A Hillquist lapidary slab saw featuring a metal basin, a circular cutting tool, and an integrated mechanical feed system. The unit is mounted on a red metal support stand and includes a translucent protective cover. The mechanical arm is marked with the Hillquist brand name and patent number 2460386. Tile Saw
Lot Location: Front
Lot 38: Belsaw Machinery Co. Model 10293 Sharpener with Stand
Belsaw Machinery Co. sharpening unit, model number 10293, featuring a 1/2 HP Delco Products motor (No. C3559). The unit is mounted on a metal stand and includes adjustable sharpening jigs and attachments. Motor specifications: 115 Volts, 60 Hertz, 6.2 Amps, 3580 idle RPM. Includes an integrated work lamp.
Lot Location: Front
Lot 39: Foley Manufacturing Company Model 332 Automatic Retouther
Foley Manufacturing Company Model 332 Automatic Retouther, serial number 10270. This unit is equipped with a Westinghouse 1/3 HP electric motor, 1725 RPM, 115V, 60 cycles. The machine is mounted on a base and features a belt-driven mechanism. Patent number 2,802,379.
Lot Location: Front
Lot 40: Foley Automatic Retoother Model 385 with Westinghouse Motor and Cabinet
Foley Manufacturing Co. automatic retoother, Model 385, serial number 12051. Features a Westinghouse 1/4 HP AC motor, 115V, 1725 RPM. The unit is mounted on a wooden work cabinet with two doors and an interior shelf. Includes various metal saw cutting tool guides and attachments as shown.
Lot Location: Front
Lot 41: Large Wasp Nest on Stand
A large, naturally constructed wasp nest mounted on a metal stand. The support structure consists of two vertical metal poles with circular base plates.
Lot Location: Front
Lot 42: Natural Wasp Nest on Metal Stand
A natural wasp nest specimen mounted on a branch, secured to a metal support pole with a circular base. The display stand consists of a vertical metal pipe attached to a white-painted, circular metal base with mounting holes.
Lot 43: Poulan 21-Inch Mulching Lawn Mower with Briggs & Stratton 4.75 HP Engine
A walk-behind push lawn mower featuring a 21-inch cutting deck and a Briggs & Stratton 4.75 HP gasoline engine. This unit is configured for mulching and includes a standard folding handle assembly.
Lot 44: Dayton 5 HP Power Reverse Tiller with Briggs & Stratton Engine
A red Dayton walk-behind garden tiller featuring a 5 HP Briggs & Stratton internal combustion engine. The unit is equipped with a power reverse transmission, adjustable depth stake, and rotating tines. Controls include a throttle lever and a gear selector for reverse, neutral, and forward operation. Unknown working conditions
Lot 45: Central Pneumatic 40 lb. Pressurized Sandblaster with Two Buckets of Silica Sand
A Central Pneumatic model 34202 pressurized sandblaster featuring a 40 lb. capacity tank, mounted on a wheeled frame with handle. Includes an integrated pressure gauge, hose assembly, and the original assembly and operating instructions manual. The lot also includes two plastic buckets containing abrasive blasting media. Silica sand included
Lot 46: Ecologizer Vac 10HP 3-in-1 Chipper Shredder
Ecologizer Vac 10HP 3-in-1 chipper shredder featuring a rotating hopper and multi-cut system. Model number 14075x75, code 5310, serial number S001117338214. Includes integrated vacuum hose and heavy-duty cutting assembly. Designed for chipping, shredding, and vacuuming yard debris. Needs motor
Lot 47: Lawn-Boy 4HP Commercial Engine Walk-Behind Mower Model 680526
A walk-behind lawn mower manufactured by Lawn-Boy, featuring a 4HP commercial engine. Model number 680526, serial number K346C0355. The unit includes a green metal deck, handle assembly with control lever, and four wheels. Manufactured in Plymouth, WI, USA.
Lot 48: Kuker Industries Agricultural Sprayer Cart
A mobile agricultural sprayer cart manufactured by Kuker Industries, Inc. of Omaha, Nebraska. The unit features a white plastic tank mounted on a red metal frame with two wheels and a front caster wheel for maneuverability. It includes a metal mounting bracket on the top surface for equipment attachment and a pull handle. The unit displays the original manufacturer decal identifying it as agricultural equipment for mowers and sprayers.
Lot 49: Craftsman 31cc Gas-Powered Weedwacker and Electric Blower/Vac Set
This lot includes a Craftsman 31cc 2-cycle gas-powered straight shaft line trimmer (Model 316.798221) and a Craftsman 7-amp electric blower/vac (Model 257.796382). The set features the trimmer, the blower unit with associated tubes, a collection bag, and the original operator manuals for both pieces of equipment.
Lot 50: Collection of Weed Eater FeatherLite Gas-Powered Outdoor Power Equipment
A collection of gas-powered outdoor power equipment including multiple Weed Eater FeatherLite string trimmers and a 150 MPH gas blower. Models include the FL20, FX26SC Xtreme, and FL1500i. Items feature 2-cycle engines and various cutting widths and performance specifications as indicated on the manufacturer labels.
Lot 51: Collection of Gas-Powered String Trimmers and Edgers
A lot containing multiple gas-powered lawn maintenance tools, including a Lawn-Boy 31cc trimmer (Model 1400), a Homelite trimmer, and a Trim-All weed and grass trimmer-edger (Model TA-1013). The lot includes various trimmer heads, attachments, and associated hardware as shown in the images.
Lot 52: Lot of Two Murray Y25 Gas-Powered String Trimmers
This lot includes two gas-powered string trimmers manufactured by Murray, model Y25. Both units feature a two-cycle engine design, loop handles, and integrated cutting heads with trimmer line. Each unit includes a printed starting instruction decal on the engine housing. These trimmers are designed for lawn and garden maintenance.
Lot 53: Ryobi Gas-Powered String Trimmers, Lot of 2
A lot of two Ryobi gas-powered string trimmers. Includes one 31cc 17-inch model and one 16-inch model. Both units feature Trimmer Plus EZ-Link attachment capability and include handles, guards, and cutting heads.
Lot 54: Craftsman 32cc Blower/Vac
A Craftsman branded 32cc gas-powered blower and vacuum unit. Features a 180 MPH peak velocity and 375 CFM air volume. Includes detachable nozzle attachments.
Lot 55: Western Manufacturing Corporation Wheeled Sprayer
A wheeled applicator manufactured by Western Manufacturing Corporation. The unit features a metal frame, four rubber tires, and a spray bar attachment with hose connections. The device includes a manual lever mechanism and mounting points for operation.
Lot 56: Rockwell Sawbuck Frame and Trim Saw, Cat. No. 33-150
Rockwell Sawbuck frame and trim saw, model number 33-150. Features a 115V AC, 15A motor, 5500 RPM, and 5/8 inch arbor. Includes integrated stand with wheels for mobility and adjustable cutting table. Serial number 83 H 66180.
Lot 57: Craftsman Limited Edition 16 Gallon 6.0 Peak HP Wet/Dry Vacuum
A Craftsman Limited Edition wet/dry vacuum featuring a 16-gallon capacity and a 6.0 peak horsepower motor. This unit includes various attachments and accessories as shown in the images. The vacuum is designed for both wet and dry debris collection and functions as a portable blower.
Lot 58: Mercury Merc 110 Outboard Motor with Fuel Tank
A Mercury Merc 110 outboard motor, presented on a wooden display stand. The unit includes an associated red plastic fuel tank with a fuel line. The motor features the Merc 110 branding on the cowling and includes a propeller at the base. Unknown working conditions
Lot 59: Johnson 3 HP Outboard Motor Model JW-23
A Johnson 3 HP outboard motor, model number JW-23, serial number E2875970. The unit features a white cowling with black lettering and includes a propeller and mounting bracket. The motor is currently displayed on a wooden stand. A dealer decal from Aqua Marine Sales in Granite City, Illinois, is present on the housing. Unknown working conditions
Lot 60: Minn Kota 565 Weedless Trolling Motor with Foot Control
Minn Kota 565 electric trolling motor featuring a weedless design, 28 lbs. of thrust, and five-speed operation. Includes the mounting bracket, shaft, motor housing, propeller, and foot-operated control pedal. Unknown working conditions
Lot 61: Ridgid Pipe Vise Stand with Integrated Yoke
A Ridgid brand pipe vise stand featuring an integrated yoke mechanism. The unit is constructed with a metal frame and includes a tripod base for stability during operation. Markings on the casting indicate the manufacturer and model specifications.
Lot Location: Front
Lot 62: Nye No. 70 Pipe Vise on Portable Stand
A Nye No. 70 pipe vise mounted to a portable wooden bench stand with metal legs. The vise features a screw-operated clamping mechanism and is marked with patent information and model number. The assembly includes a wooden support beam and metal tripod-style legs.
Lot Location: Front
Lot 63: E & R Mfg. Co. Elmer's Little Helper Masonry Block Splitter
A manual masonry block splitter, identified as Elmer's Little Helper, manufactured by E & R Mfg. Co., Inc. of Kirklin, Indiana. The unit features a chain-driven mechanism for adjusting the cutting tool height, a metal work platform, and a tripod-style support base. Includes patent numbers 2,777,438 and 2,819,710. The model number is CM-9. Stone and Brick cutter
Lot Location: Front
Lot 64: Anaconda Sealtite 1-1/4 Inch Type E.F. Flexible Metal Conduit
A length of Anaconda Sealtite 1-1/4 inch Type E.F. flexible metal conduit. The hose features a reinforced exterior and is marked with U.S. Patent 3073351. Underground Conduit
Lot Location: Front
Lot 65: Grco Mine Spray 1000 PSI IC-136 Industrial Hose
A length of Grco Mine Spray industrial hose rated for 1000 PSI, marked IC-136 and MSHA. The hose features metal fittings at the ends and is secured with banding. Commonly used for water piping and sump pumps
Lot Location: Front
Lot 66: Marco Fireplace Unit with Heatilator Chimney Pipe Sections
A Marco fireplace unit featuring a metal firebox, grate, and associated components including artificial logs and fire media. The lot also includes a collection of Heatilator Inc. chimney pipe sections, marked as fireplace parts by Underwriters Laboratories. Items are presented as a group.
Lot Location: Front
Lot 67: Kohler Magnum 15 Engine with Accessories
A Kohler Magnum 15 industrial engine featuring an air cleaner assembly, exhaust muffler, and Oil Sentry protection system. The lot includes an external fuel tank and a collection of electrical wiring components as shown in the accompanying images.
Lot Location: Front
Lot 68: Assorted Collection of Four Tool Boxes
A lot containing four various tool boxes of different sizes and materials. The collection includes one yellow and black plastic tool box, one large black DeWalt hard-shell case, one grey metal tool box, and one smaller red metal tool box. Items are bundled.
Lot 69: Reznor Industrial Gas-Fired Unit Heater
A Reznor industrial unit heater featuring a metal housing with adjustable louvers. The unit includes an attached gas supply line with a shut-off valve and a metal exhaust elbow. The assembly is mounted on a metal frame with two vertical threaded rods for suspension or installation. The unit measures approximately 24 inches in height.
Lot Location: Front
Lot 70: Cast Iron Hand Water Pump
A cast iron hand-operated water pump featuring a manual lever mechanism and a spout. The body of the pump is marked with the word CHINA. The unit is mounted on a circular base with open side panels.
Lot Location: Front
Lot 71: Star Water Systems Submersible Sump Pump with Master Plumber Sediment Filter and Hoses
This lot includes a Star Water Systems 1/2 HP submersible sump pump, model SSEH, featuring a 115V motor and float switch. Also included is a Master Plumber model 583310 sediment water filter with housing and a collection of assorted flexible hoses and tubing.
Lot Location: Front
Lot 72: Assorted Buckets of Sand for concrete
A collection of various plastic buckets filled with sand. Used for concrete mixture
Lot Location: Front
Lot 73: Assorted Turf Tires, Wheels, and Hub Assemblies
A collection of various turf-style tires, wheel rims, and metal hub assemblies. The lot includes multiple loose tires, mounted tire and wheel assemblies, and a red plastic crate containing several metal wheel hubs and related hardware components. Some items will be located inside the building so please check that you have it all
Lot Location: Outside and front
Lot 74: Durbin-Durco Lever Load Binders, Set of 4
A set of four red-painted metal lever-style load binders manufactured by Durbin-Durco. These mechanical devices feature integrated hooks and tensioning handles designed for securing heavy loads. Each unit displays the manufacturer's name embossed on the handle.
Lot Location: Front
Lot 75: Collection of Multi-Purpose Grease Cartridges in Wire Basket
A collection of 15-ounce multi-purpose grease Cartridges housed in a metal wire storage basket. The lot includes multiple individual tubes featuring orange and silver branding.
Lot Location: Floor front
Lot 76: Assorted Staineless Steel Metal Rods, Fittings, and Bases in Box
A collection of assorted metal rods, threaded fittings, and circular metal bases contained within a cardboard box. The lot includes various lengths of metal tubing and hardware components.
Lot Location: Front floor
Lot 77: Fence Stretcher and come along, Lever Hoist with Chain and Rope in Wooden Crate
Used as a fence stretcher and come along. A manual lever hoist featuring a 5-ton capacity hook, accompanied by a length of metal chain and a coil of rope. The items are contained within a wooden crate. The hoist body displays a serial number: B19H54.
Lot Location: Front floor
Lot 78: Stack of Circular Wooden Plywood Spools
A collection of multiple circular wooden spools constructed from plywood. The stack includes several pieces of varying surface finishes, with some showing natural wood grain and others featuring a darker, weathered appearance.
Lot Location: Front
Lot 79: Assorted Industrial Casters and Wheels in Red Plastic Bin
A collection of various industrial-grade casters and wheels housed in a red plastic storage bin. The assortment includes swivel and fixed casters of different sizes, materials, and mounting styles, including metal, rubber, and plastic components. The bin is included with the lot.
Lot Location: Front
Lot 80: Collection of Lima Register Company Round Ceiling Diffusers and dryer vents
A bulk lot containing multiple Lima Register Company round ceiling diffusers, model 65-6. The units feature white finish components and metal duct collars. Several items are housed in original manufacturer packaging.
Lot Location: Front
Lot 81: Pair of Industrial Gas Cylinders
A set of two industrial gas cylinders, one finished in blue and one in orange. The blue cylinder features markings including 'Amerigas' and 'DOT-3A 2015'. Both units are equipped with protective valve caps. Aumann Auctions does not own the rights for these items to be filled
Lot Location: Front
Lot 82: Assorted Collection of Nails and Fasteners
A large assortment of various nails and fasteners, including bulk quantities stored in cardboard boxes, metal tins, and a yellow plastic bin. The collection features multiple types and sizes of nails, including roofing nails, finishing nails, and specialized hardware, with some items in original retail packaging and others loose. The lot includes various branded boxes such as Maze Nails and E.G. Roofing.
Lot Location: Front
Lot 83: Assorted HVAC Air Filters and Humidifier Wick Filter
A collection of HVAC air filters and a humidifier wick filter. Includes multiple boxes of Fram glass air filters in 10x25x1 size, a box of Air Handler pleated air filters in 16x30x1 size, and one GE SmartWater wick filter for cool mist humidifiers.
Lot Location: Front
Lot 84: Metal Shelving Components and Hardware Assortment
A collection of metal shelving components, including multiple flat metal shelf panels and various slotted support rails and uprights. The lot also includes a box containing assorted metal hardware, brackets, and decorative metal elements.
Lot Location: Floor in front, middle of room by fire exit
Lot 85: Plastic Storage Cabinet and Stackable Chairs
A tall, modular plastic storage cabinet featuring multiple interior shelves and dual-door access. Included with the cabinet are two stackable plastic chairs with armrests.
Lot Location: By fireplace
Lot 86: Ashland-Davis Premium Series 42 D4 Vinyl Siding and Trim Components
A collection of Ashland-Davis Premium Series 42 D4 vinyl siding panels and associated trim components. The lot includes multiple pieces in a Natural Clay color with a woodgrain texture, packaged in original manufacturer cardboard boxes. Includes various lengths of siding panels and structural trim pieces as shown in the provided images. Siding and soffit
Lot 87: Ebac Industrial Dehumidifier Wood Dryer Units with L.R. Bradley & Co. & Moisture Meter
A collection of industrial equipment including stacked Ebac dehumidifier wood dryer units and an L.R. Bradley & Co. Model BD-10 electronic moisture meter. The lot includes associated control boxes, electrical components, and documentation. The moisture meter features a dial interface and battery compartment.
Lot 87A: Oasis Ebco Manufacturing Co. Dehumidifier
An Oasis brand dehumidifier manufactured by The Ebco Manufacturing Co. of Columbus, Ohio. The unit features a metal housing with a front-facing grille and a removable plastic collection basin. Includes an attached power cord.
Lot 88: Assorted Tabletop Surfaces and Panels
A collection of various tabletop surfaces and panels, including pieces with faux marble laminate finishes and wood-grain surfaces. The lot consists of multiple flat panels of varying sizes and materials, suitable for furniture repair or construction projects.
Lot 89: Assorted Lumber, Hardware, and Storage Lot
A collection of assorted lumber pieces, trim, including various lengths and finishes. The lot includes a green-painted wooden crate, a cardboard box containing curved metal components, a large coil of twine, and a container of miscellaneous metal hardware and fasteners. Items are presented as a single lot.
Lot 90: Assorted Plumbing and Electrical Hardware Lot
A large collection of assorted plumbing and electrical components, including PVC piping, various pipe fittings, metal plumbing fixtures, electrical wiring, and hardware. The lot features a sink basin, multiple boxes of electrical connectors, and miscellaneous construction materials as shown in the images. Large pipes in the back and moving box of fittings not included. Those are lot 90A
Lot 90A: Assorted PVC Pipe Fittings and Connectors
A collection of various PVC pipe fittings, connectors, and short pipe segments contained within a cardboard box. Includes multiple diameters and configurations such as couplings and tees. Some items feature manufacturer markings and specifications.
Lot 91: Assorted Door Hardware and Locksets Collection
A collection of assorted door hardware and locksets, including various brands such as Schlage, Corbin, and Design House. The lot contains multiple door knob sets, internal mechanisms, and mounting hardware, presented in original and partial packaging.
Lot 92: Metal Carrying Case with Assorted Steel Tool Bits
A rectangular metal carrying case featuring a hinged lid, handle, and latch closures. The interior contains a selection of steel tool bits and a paper instructional insert. The exterior surface shows signs of surface wear and material accumulation.
Lot 93: Steel Joist Hangers, Assorted Hardware, Metal Components, and Utility Containers
A collection of miscellaneous workshop and utility items including various metal brackets, joist hangers, fasteners, bolts, nuts, and pulleys. The lot features several plastic jugs, a metal heater unit, and assorted hardware stored in boxes and containers. Items are presented as a bulk group of industrial and shop supplies.
Lot 94: Assorted Industrial Hardware and Gas Pipe Fittings Collection
A collection of industrial hardware and plumbing components contained within multiple plastic buckets and a cardboard box. The lot includes various metal pipe fittings, conduit connectors, clamps, threaded pipe segments, and several lengths of rebar. The items are presented in bulk, as shown in the accompanying photographs.
Lot 95: Quikrete Walk Maker Concrete Mold, Forms and Assorted Wire Mesh
A collection featuring a Quikrete Walk Maker concrete molds and forms for creating decorative stone patterns, accompanied by a specialized brush attachment and multiple rolls of wire mesh fencing.
Lot 96: Assorted Scaffolding Components and Metal Piping
A collection of construction-grade scaffolding components, including vertical support poles, cross-bracing, and associated hardware. The lot also includes a set of connected metal pipes with threaded elbow fittings. Items are stored in bundles and a metal bucket.
Lot 97: Assorted Electrical Components and Hardware Lot
A collection of assorted electrical components, hardware, and shop supplies contained within multiple boxes and containers. The lot includes electrical terminal blocks, various wiring connectors, a yellow protective work light cage, drive belts, and miscellaneous metal hardware parts. Items are presented as a bulk lot of shop and industrial components.
Lot Location: Near scaffolding
Lot 98: Garage Door Panels Section with Motor and Hardware Components
Garage door panels section featuring a white, textured finish with integrated metal side rails. The lot includes a 1/2 HP garage door opener motor unit with chain drive, along with a collection of associated hardware, including hinges, brackets, pulleys, and miscellaneous mounting components housed in containers. No wood is included. Garage door parts ONLY
Lot 99: Assorted Industrial Drive Belts and Hydraulic Hoses
A collection of various industrial drive belts and hydraulic hoses. The lot includes multiple rubber V-belts of differing lengths and diameters, alongside several flexible hoses equipped with metal fittings.
Lot 100: Assorted HVAC Ductwork, Ventilation Components, and Hardware Lot
A collection of HVAC and building maintenance components including various galvanized steel ductwork sections, rectangular duct boots, ventilation grilles, and blower motor assemblies. The lot also contains miscellaneous hardware, including electrical components, flexible plumbing hoses, and small tools.
Lot 101: Assorted Peterson Automotive Trailer Tail Lights
A collection of Peterson brand square red automotive tail lights and associated wiring, housed in a red plastic storage crate. The lot includes multiple light assemblies with mounting brackets and wiring harnesses.
Lot 102: Assorted Electrical Conduit, Wiring, and Fittings Lot
A collection of electrical supplies including multiple lengths of flexible metal conduit, various spools of electrical wiring, and several containers filled with assorted electrical fittings, connectors, and couplings. The lot also includes a packaged Advance brand lampholder.
Lot 103: Assorted Electrical Components and Hardware Lot
A comprehensive collection of electrical supplies and hardware components housed in various containers. The lot includes multiple buckets and boxes containing electrical junction boxes, Leviton brand switches and outlets, PVC terminal adapters, ceramic light fixture bases, spools of electrical wire, and various metal mounting plates. Also included are miscellaneous HVAC control components, including a Honeywell thermostat, and a black plastic document storage tube.
Lot 104: Rineker Cast Iron Horseshoe Pitching Stakes, Set of 5
A collection of five cast iron horseshoe pitching stakes, marked with the Rineker brand. The items measure approximately 7.5 inches in length.
Lot 105: Red Metal Loading Ramps
A pair of red-painted metal loading ramp featuring a perforated surface for traction. The ramp is curved in design and includes integrated side rails.
Lot 106: Tecumseh AW613RT-121-J7 Refrigeration Compressor
Tecumseh hermetic refrigeration compressor, model AW613RT-121-J7 (AWA2460ZXT). Designed for use with R-404A and R-507 refrigerants. Specifications include 200-230V at 60Hz or 200-220V at 50Hz. Includes associated wiring diagrams, technical documentation, terminal cover, and valve component as pictured.
Lot 106A Compressor: Tecumseh AW702ET-093-J7 Refrigeration Compressor
A Tecumseh hermetic refrigeration compressor, model AW702ET-093-J7 (AWG5519EXN). Specifications include 208-230V at 60Hz and 200-220V at 50Hz, 1PH, with an LRA of 52.0. The unit is manufactured in the USA and is presented in its original packaging.
Lot 106B: Tecumseh AV191TT-055-J7 Refrigeration Compressor
Tecumseh refrigeration compressor, model AV191TT-055-J7 (AVD5558EXG). Specifications include 3-phase power, 460V at 60Hz or 380-420V at 50Hz, and R22 refrigerant compatibility. Includes original packaging, mounting hardware, and technical wiring diagrams.
Lot 107: Work Grabber Sawhorse with Assorted Rolls of Material and Wheelbarrow Basin
A lot featuring a Work Grabber brand sawhorse, a green wheelbarrow basin, and several rolls of assorted materials including carpet, protective paper, and plastic sheeting.
Lot 108: Doorway Transitions, Assorted Metal Trim and Rubber Gasket Strips
A collection of various metal trim pieces and flexible rubber gasket strips. The lot includes multiple lengths of aluminum-style channels and assorted weather-stripping materials.
Lot 108A: Assorted Wood Trim and Lumber Stock with Cabinet Frame
A collection of assorted wood trim, molding, and lumber pieces, presented alongside a wooden cabinet frame structure. The lot includes various lengths and profiles of wood, suitable for woodworking or construction projects. Also included is a stand or rack component.
Lot 109: Assorted Metal Piping and Structural Support Components
A collection of assorted metal pipes and structural support components. The lot includes multiple lengths of threaded metal piping, a support pole with a flat base plate, and various metal mounting brackets and fittings.
Lot 110: Assorted Wood Lumber and Scrap Material Lot
A collection of assorted wood materials including various dimensional lumber, cut pieces, and scrap wood. The lot features multiple stacks of boards, raw wood segments, and miscellaneous wood components contained within and around plastic storage bins. Items exhibit varying lengths, finishes, and states of processing.
Lot 110A: Assorted Wood Lumber and Plywood Scrap Lot
A large collection of assorted wood lumber, plywood sheets, and various cut pieces of timber. The lot includes multiple stacks of flat wood panels, dimensional lumber, and miscellaneous wood scraps of varying sizes and types. Also included is a plastic crate containing automotive splash guards and rubber floor mats.
Lot 111: Pair of Adjustable Wood Roller Stands
A set of two floor-standing material supports featuring adjustable height mechanisms and horizontal wooden rollers. The stands are constructed with grey-painted wooden frames and bases, designed for supporting long workpieces in a workshop environment.
Lot 112: Gott Plastic Waste Container and Fiber Drum
This lot includes two storage containers: one black plastic Gott brand waste container with a lid and one large cylindrical fiber drum with a removable lid.
Lot 113: Set of Six Industrial Green Enamel Pendant Light Fixtures
A collection of six industrial-style pendant light fixtures featuring green enamel exterior shades and white enamel interiors. Each unit includes a metal downrod and mounting canopy. The fixtures are designed for overhead suspension and include standard internal socket components.
Lot 114: Patio Umbrella and Picnic Table
This lot includes a Finkel Outdoor Products patio umbrella featuring a yellow and white striped canopy, accompanied by a metal umbrella stand base. Also included are two green-painted wooden planks with angled top edges that will convert into a picnic table. The umbrella base is marked with a manufacturer label identifying it as an Aberdeen Home Product by Finkel Outdoor Products, Inc. Missing middle plank
Lot 115: Belco Window Fan
A metal-cased window fan featuring a Belco brand label and an integrated Eskimo Model 08108 motor, manufactured by the McGraw-Edison Co., Bersted Mfg. Div. in Boonville, Missouri. The unit is rated for 115 volts, 60 cycles, A.C. only, and 60 watts. The design includes a large primary fan assembly and two smaller top-mounted fan assemblies with protective wire cages.
Lot 116: Assorted Metal Brackets and Electrical Components
A collection of assorted metal brackets, clamps and resistors, including yellow-painted components, housed within a wire storage basket. The lower section of the basket contains various electrical hardware, including insulators and conduit fittings.
Lot 117: Assorted Woodworking Materials and Construction Components
A collection of assorted woodworking materials and construction components, including various lengths of dimensional lumber, wood trim, turned wood spindles, and circular wood cutouts. The lot also includes a box of Phillips brand corner bead for drywall construction and a galvanized metal tub containing small wood offcuts and stakes. Does not include wainscoting behind. That is lot 117A.
Lot 117A: Wainscotings, Assorted Lengths of Tongue and Groove Hardwood Flooring Planks
A collection of tongue and groove hardwood flooring planks featuring a finished surface. The lot includes multiple lengths of varying dimensions, suitable for flooring installation or woodworking projects. Wainscoting
Lot 118: Cargo Lok Adjustable Load Bars, Set of Two
A set of two Cargo Lok adjustable load bars designed for securing cargo in transport vehicles. These units feature a ratcheting mechanism for tensioning and rubberized end pads for grip. The housings are marked with the Cargo Lok brand and Cleveland, Ohio manufacturing location.
Lot Location: On south wall
Lot 119: Set of Wooden Louvered Bi-Fold Doors
A set of wooden bi-fold doors featuring a louvered design. The doors are finished in a dark wood stain and include attached metal mounting hardware at the top. The lot also includes a separate metal track or guide component.
Lot Location: South wall
Lot 120: Fluorescent Light Fixtures with Tubes
A collection of multiple linear fluorescent light fixtures, each equipped with fluorescent tubes. These fixtures are designed for overhead mounting and are suitable for commercial or industrial lighting applications.
Lot Location: South wall
Lot 121: Set of Two Industrial Waste Receptacles with Dome Lids and Assorted Buckets
This lot includes two large cylindrical industrial waste receptacles, each featuring a blue rim and a galvanized metal dome lid with a push-flap opening. Also included is a blue rectangular utility bin containing a stack of assorted plastic buckets.
Lot 122: Assorted Metal Drawer Slide Rails and Hardware Components
A large collection of metal drawer slide rails and associated mounting hardware. The lot includes various lengths and styles of drawer glides, featuring both steel and painted finishes, with some components still bundled or packaged in plastic. Suitable for furniture repair, cabinetry projects, or hardware inventory.
Lot 123: Angle Iron diving shelf on wheels, Rolling Metal Lumber Storage Rack with Assorted Wood Planks
A mobile storage rack constructed from angle iron, featuring four caster wheels for transport. The rack is currently loaded with a selection of dimensional wood planks of varying lengths and thicknesses. The frame exhibits surface oxidation consistent with storage and use.
Lot 124: Window Arches, Caradco MF Vinyl Curved Casing Set
A set of Caradco MF vinyl curved Casing components. Includes parts labeled 8G12533 and 8G12526. These items are designed for architectural trim applications and window arches
Lot 124A: Window Arches, Caradco Vinyl Clad Arch Window Casing Set
A set of two curved, vinyl-clad window Casing segments. The components are labeled with part numbers 8G12528 and 8G12533. These pieces are designed for 4-0 sized window units and feature a wood-grain finish on the interior side.
Lot 124B: Window Arches, Caradco Vinyl Clad Arched Window Components
A collection of arched window components, identified as Caradco vinyl clad parts. The lot includes multiple curved wooden segments with vinyl cladding, featuring various part numbers including 8G12528 and 8G12533. These components are designed for architectural window assembly.
Lot 124C: Window Arches, Set of Two Curved Laminated Wood Arch Components
This lot includes two curved, laminated wood structural components. The pieces feature a semi-circular design and are marked with identifiers including 8DHRT 32 X JB2 and C08 706559997. These items are constructed from layered wood and are suitable for architectural or structural framing applications.
Lot 124D: Caradco Vinyl Arch Window Casing Set
A set of curved, laminated wood components designed for window Casing applications. The items are labeled with Caradco part numbers 8G35288 and 8DHRT28XJ2, with one label specifying 'DHRT X-JB 28 FOR 6 1/2 WALL'. The pieces feature a curved profile and are constructed from multiple layers of wood.
Lot 124E: Caradco 28-Inch Radius Wood Arch Window Casing Set
A set of curved wood window Casing components, identified by Caradco part numbers 8DHRT28XJ2 and 8DHRT28COLCG. These pieces are designed for a 28-inch radius application, specifically for a 6 1/2-inch wall depth. The set includes multiple curved segments as shown in the provided images.
Lot 124F: Arched Window Casing and Trim Components
A collection of curved, arched window Casing and trim components. The items are constructed from wood and are packaged in original cardboard protective sleeves. Labels indicate these are vinyl-compatible components, with part numbers including 8G12526 and 8G28698, identified as Aradco products. 6 boxes of arch window Casing and jam extensions
Lot 125: Collection of Metal Screw Jacks
A group of multiple metal screw jacks featuring threaded rods and adjustable bases. These mechanical lifting tools are constructed from iron and are designed for heavy-duty support or leveling applications.
Lot 126: Adjustable Steel Shoring Posts and Support Columns
A collection of adjustable steel shoring posts and support columns featuring threaded adjustment mechanisms and perforated height-adjustment holes. The lot includes various lengths and configurations, designed for structural support applications.
Lot 127: Set of Three Interior Flush Doors, 30 x 80 Inches
A collection of three interior flush doors, each measuring 30 inches by 80 inches. The set includes one door with a finished wood veneer and a pre-drilled hole for hardware, and two unfinished plywood-faced doors. These items are suitable for residential interior use. (3) doors
Lot 128: Collection of Four Interior Flush Doors
A lot consisting of four interior flush doors featuring wood veneer finishes. The set includes doors with varying hardware configurations, including some with pre-drilled holes for knobs and attached hinges. These doors are constructed with flat surfaces and are suitable for interior residential applications. (4) doors
Lot 129: Two Pre-Assembled Interior Door Units
Damaged Lighter one has crack going down door frame. Darker one has hole punched near top. A lot consisting of two interior door units. One unit features a light wood finish and is labeled as a pre-assembled unit with trim. The second unit features a dark wood finish. Both units include door handle cutouts and hinge hardware. Visible wear and structural imperfections are present on the frames and door surfaces. (2) doors with frames
Damaged: Lighter one has crack going down door frame. Darker one has hole punched near top.
Lot 130: Storm Door with Hardware and Accessories
A storm door featuring a glass panel and lower panel design. The lot includes the door, associated door hardware, pneumatic door closers, and various installation components and brackets contained in a bag.
Lot 131: Collection of Assorted Residential and Security Lighting Fixtures
A mixed lot of lighting components including multiple outdoor security light housings, various lantern-style fixtures, and a ceiling light canopy. The collection features several units in original packaging, including a Hampton Bay 5-light chandelier box and Regent mercury vapor security light packaging. Items vary in material, including metal and glass components, and are presented as a bulk lot of lighting hardware.
Lot 132: Lot of Two Rolls of Fiberglass Air Filter Media
This lot includes two rolls of disposable fiberglass air filter media for central heating and air conditioning systems. The first roll is an AmerGlas Hammock Filter Material measuring 28 inches wide by 240 inches long by 1 inch thick. The second roll is a disposable air filter media measuring 36 inches wide by 240 inches long by 1 inch thick.
Lot 133: Andersen Perma-Shield Narroline Window Sash
An Andersen Perma-Shield Narroline window sash unit. The item features a white frame and is presented in its original cardboard packaging from the Andersen Corporation in Bayport, Minnesota. The sash includes integrated weather stripping and mounting profiles as shown in the provided images.
Lot 134: Pair of Stinson Sales Co. Inc. Ladder Jacks
A set of two metal ladder jacks manufactured by Stinson Sales Co. Inc. of Spokane, Washington. Each unit features an adjustable design with a notched support arm for height positioning. Serial numbers 257710 and 257711 are present on the identification plates.
Lot 135: Collection of Three Wooden Step Ladders
A lot consisting of three wooden step ladders of varying heights. Each unit features a folding design with integrated metal support braces and horizontal step treads.
Lot 136: Interior Door with Wood Grain Finish and Frame
An interior door featuring a wood grain finish, complete with its corresponding wooden door frame and installed brass-tone hinges. The door includes a pre-drilled hole for a handle set and a recessed latch plate. The frame shows handwritten markings on the top header.
Lot 137: Window Screens, White Aluminum Window Screen Frame 28 x 71
A white aluminum window screen frames measuring 28 inches by 71 inches. The frame features a central horizontal support bar and dark mesh screening material.
Lot 137A: Assorted Plexiglass, Acrylic and Textured Plastic Sheets
A collection of various plexiglass, plastic and acrylic sheets, including transparent, translucent, and textured varieties in multiple colors such as yellow, blue, and dark brown. Some sheets retain original protective masking and manufacturer labeling. The lot includes sheets of varying dimensions and surface finishes.
Lot 138: Electric Circular Ventilation Fan with Mounting Hardware
An electric ventilation fan featuring metal propeller housed within a circular metal frame. The unit includes integrated mounting bolts and a standard electrical power cord. The frame is finished in red on the front and yellow on the rear, with a black motor housing.
Lot 139: Aluminum Framed Screen Door
A single aluminum framed screen door featuring a metallic finish. The door is presented with protective cardboard covering the mesh panel. Includes a handle mechanism on the side frame.
Lot 140: Assorted Ceiling Fan Components and Light Fixtures
A collection of disassembled ceiling fan parts and lighting accessories. The lot includes multiple motor housings in white and brass finishes, various sets in white and wood-tone finishes, and a four-arm light fixture assembly with frosted glass shades.
Lot 141: Assorted Window & Door Blinds Including Hunter Douglas and Better Homes and Gardens
A collection of window & Door blinds featuring a Hunter Douglas 1-inch custom wood blind set and a Better Homes and Gardens 2-inch faux wood finished PVC window blind measuring 31 inches by 64 inches. The items are presented in their original packaging with associated mounting hardware and installation components included.
Lot 142: Industrial Reinforced Rubber Conveyor Belt Roll
A roll of industrial-grade reinforced rubber belting featuring a textured exterior surface and a pre-punched interior seam for mechanical fastening. The material is constructed with a woven fabric reinforcement layer and includes horizontal striping details.
Lot Location:
Lot 143: Wooden Tool Storage Rack with Assorted Cleaning Implements
A freestanding wooden storage rack designed for organizing long-handled tools. The unit features a rectangular frame with circular cutouts on the top and bottom tiers to secure handles in an upright position. Included with the rack are various cleaning implements, including multiple push brooms with different bristle types, a metal shovel, and manual hand pumps (unknown if they work)
Lot 144: Kewanee Manufacturing Company Aluminum Basement Screens and Storm Sash
A collection of Kewanee Manufacturing Company aluminum basement screens and storm sash, housed in original packaging. The items feature aluminum frames with mesh screening and glass panels. The packaging is marked with handling instructions and product specifications
Lot 145: Stack of Particle Board Panels with Metal Sheets
A collection of stacked particle board panels featuring finished edges, accompanied by a set of flat metal sheets placed on the top surface. The lot includes multiple rectangular panels of uniform size.
Lot 146: Tree Stand and Climbing Equipment Set
A collection of hunting equipment including a metal platform tree stand with a camouflage fabric seat, a climbing aid with a wooden base, and a separate padded seat attachment. The items feature metal construction, chain mounting systems, and various hardware components.
Lot 147: Tree Stand and Climbing Platform Set
A two-piece hunting equipment set consisting of a metal ladder-style climbing platform and a wooden platform with a camouflage leaf pattern. The wooden component features a metal frame attachment and a chain for securing to a tree. Both items are finished in a multi-color camouflage paint scheme.
Lot 148: Set of Three Camouflage Metal Climbing Sticks
A set of three metal climbing sticks featuring a camouflage finish. These units are designed for vertical ascent and include integrated steps along the central support beams.
Lot 149: Metal Tree Stand Climbing Sticks
A set of metal climbing sticks designed for use with tree stands. These units feature a modular design with integrated steps and mounting brackets for attachment to tree trunks. The construction consists of square metal tubing with a green finish.
Lot 150: Set of Four Metal and Wood Pedestal Stands
A set of four pedestal stands featuring metal pipe supports and wooden platforms. Each unit is constructed with a vertical metal pole attached to a flat, multi-sided wooden top. The metal components exhibit a multi-colored finish, and the wooden surfaces show signs of wear and previous use. The stands are designed for elevated placement or display purposes.
Lot 151: Tractor Seat and Backrest Assembly
A set consisting of a metal-framed tractor seat with a fabric cover and a separate metal-backed seat assembly. The items feature metal construction with integrated mounting brackets and hardware.
Lot 152: Single-Rail Metal Tree Stand Climbing Stick
A single-rail metal climbing stick designed for use with tree stands. The unit features a central vertical support bar with alternating horizontal steps welded to the sides. The construction is of tubular metal with a painted finish.
Lot 153: Metal Tree Stand Climbing Sticks, Set of Two
A set of two metal climbing sticks designed for use with tree stands. Each unit features a central square-tubing spine with welded steps extending from alternating sides. The metal is finished with a camouflage-pattern paint application. These units are intended for vertical mounting to assist in ascending trees.
Lot 154: Collection of Large Threaded Steel Anchor Bolts
A group of multiple long, threaded steel anchor bolts featuring square heads and integrated washers. These industrial fasteners are constructed from heavy-duty steel
Lot 155: Woodford Iowa Hydrant Water Post
A Woodford Iowa brand hydrant water post featuring a cast iron head assembly with a lever-operated valve mechanism. The unit includes a vertical metal pipe riser and a base connection fitting.
Lot 156: Set of Five Metal Rods with Hexagonal Bolt Heads
A collection of five metal rods, each featuring a hexagonal bolt head at one end. The rods exhibit surface oxidation throughout their length.
Lot 157: Two Metal Truss Sections
A set of two metal truss sections constructed from tubular steel. Each section features a triangular support design with integrated cross-bracing. The units include connection points at the ends for assembly.
Lot 158: Two Pieces of Steel Rebar
A lot containing two lengths of steel reinforcing bar (rebar).
Lot 159: Assorted Aluminum Gutter Sections and Gutter Guard Mesh
A collection of aluminum gutter components including multiple downspout sections, various lengths of gutter channels, and rolls of gutter guard mesh. Includes associated metal mounting brackets and hardware.
Lot 160: Assorted Metal Structural Channel Beams
A collection of metal structural channel beams featuring pre-drilled mounting holes and rectangular cutouts. The lot includes multiple pieces of varying lengths and configurations.
Lot 161: Black Painted Interior Door with Frame and Hardware
A single interior door finished in black paint, featuring an installed door knob and accompanying wooden door frame. The assembly includes the door slab, frame components, and hardware as shown in the images.
Lot 162: Assorted Wood Planks and Panels
A collection of wooden boards and panels of varying dimensions and finishes. The lot includes several long planks with visible wood grain patterns and flat panels with structural bracing on the reverse side. Items are presented as a group lot.
Lot Location: South wall by exit door
Lot 163: Pegboard Display Panel with Metal Frame
A rectangular display panel featuring a perforated pegboard surface mounted within a green-painted metal frame. The panel is designed for wall-mounted storage or retail display applications.
Lot 164: Metal Angle Iron and Structural Channel Lot
A lot consisting of two long metal structural components. One piece is a galvanized steel angle iron, and the second piece is a steel channel with pre-drilled holes
Lot 165: Lennox Gas Forced Air Furnace with General Filters Humidifier
A Lennox gas-fired forced air furnace featuring a 137,000 BTU/hr input and 109,600 BTU/hr bonnet capacity. The unit is designed for natural gas and is suitable for alcove or closet installation. It includes an attached General Filters, Inc. residential humidifier unit. The system operates on a 120V power supply with a 1/3 HP direct drive motor.
Lot 166: Craftsman Lapidary Grinding and Polishing Unit
A Craftsman brand lapidary grinding and polishing machine featuring a horizontal grinding wheel, a fluid reservoir, and an adjustable tool rest. The unit is housed in a grey metal casing with ribbed aluminum side panels and includes a multi-step pulley system for speed adjustment. The machine is currently positioned on a wooden cabinet base.
Lot 167: Steelmaster Art Steel Co. Inc. Metal Filing Cabinet
A grey metal filing cabinet manufactured by Steelmaster Art Steel Co. Inc., New York, U.S.A. The unit features a multi-drawer configuration with integrated label holders and metal handles. The drawers include internal adjustable dividers.
Lot 168: Assorted Lapidary Slabs and Mineral Specimens
A collection of assorted lapidary slabs and mineral specimens, including various types of jasper, agate, and tiger's eye. The material is presented in multiple containers, consisting of various shapes, sizes, and patterns suitable for lapidary work or display. Commonly used Stone for making jewelry
Lot 168A: Collection of Petrified Wood Specimens
A collection of multiple petrified wood specimens presented in two plastic crates. The lot includes various sizes and shapes of mineralized wood, displaying natural grain patterns and textures.
Lot 168B: Jewelers Workbench with Drawers and Bench Pins
A specialized workstation designed for jewelry fabrication and repair. The unit features a contoured wooden work surface with a central slot for interchangeable bench pins, which are included. The structure includes a storage cabinet with two drawers and a lower cupboard door.
Lot 169: Doerr Motor for Shaker & Bucket of Assorted Rocks and Minerals
A plastic bucket containing a collection of various rocks and minerals, including pieces with visible banding and geological formations. The bucket is positioned on a metal stand equipped with a Doerr Electric Corp. 1/4 HP motor for shaking.
Lot 170: Lapidary Equipment for polishing stones on Cabinet Base with Assorted Stones
A motorized lapidary piece mounted on a green painted wooden cabinet base. The unit includes a circular wheel head with a blue felt surface. The lot also features a collection of various stones and rocks contained in a blue plastic bowl and metal canisters. Used for grinding and polishing stones
Lot 171: Gemstone Equipment Manufacturing Lapidary Unit with Cabinet and Accessories
A Gemstone Equipment Manufacturing lapidary unit housed on a green wooden cabinet with a burl wood-style top. The lot includes the primary lapidary machine, a plastic tray, a container of raw mineral specimens, a glass vial containing small stone fragments, a container of Bruce Bar lapidary compound, and a GFC ring mandrel set.
Lot 172: Crystallite Ringleader Cabochon Unit with Cabinet and Rough Stone Assortment
A lapidary cabochon grinding unit manufactured by Crystallite Products, model Ringleader, serial number 1854. The unit features a blue metal housing, an integrated water feed system with a valve, and is mounted on a green painted wooden storage cabinet with internal shelving. Included with the unit is a cardboard box containing an assortment of rough stone specimens.
Lot 173: Lapidary Grinding and Polishing Station with Water Reservoir
A bench-mounted lapidary unit featuring a motor-driven grinding and polishing assembly with integrated water cooling lines. The system includes a separate water reservoir tank with a spigot and a wooden cabinet base. Also included are five assorted mineral specimens to start your next hobby
Lot 174: Lapidary Grinding and Polishing Station with Assorted Mineral Specimens
A bench-mounted lapidary unit featuring a grinding and polishing station with a water reservoir system. The equipment includes multiple abrasive wheels and polishing discs. The lot is accompanied by a collection of various raw mineral specimens and rock samples, as shown in the provided images. The unit is mounted on a green storage cabinet base.
Lot 175: Lapidary Grinding and Polishing Machine with Electric Motor
A floor-standing lapidary grinding and polishing unit featuring a metal frame, a belt-driven assembly, and an electric motor. The system includes a water control valve, a grinding wheel, and various mounting components. The motor is a Dyna-Line unit. The equipment is presented as a collection of parts for assembly or repair.
Lot 176: Sapphire Arrow Profile Company Lapidary Grinding and Polishing Unit with Motor and Accessories
A Sapphire brand lapidary grinding and polishing machine manufactured by Arrow Profile Company. The unit is mounted on a wooden cabinet base and includes a Hitachi AC motor, various grinding attachments, and a collection of raw and processed mineral specimens housed in a plastic crate and storage containers.
Lot 177: Star Diamond Industries Model C-6DVD Lapidary Unit with Cabinet and Rock Assortment
A Star Diamond Industries Model C-6DVD lapidary machine, serial number 3221, mounted on a green painted wooden cabinet. The unit includes a belt-driven motor, integrated cutting and grinding components, and a water reservoir system. The lot also includes a plastic crate containing an assortment of raw mineral specimens.
Lot 178: Lapidary Cabbing Machine with Craftsman 1/2 HP Motor and Rock Assortment
A lapidary cabbing machine featuring a Craftsman 1/2 horsepower capacitor motor, 3450 RPM, ball bearing construction. The unit includes a grinding wheel, a secondary wheel attachment, a water reservoir, and a cabbing guide accessory. The lot also includes a plastic crate containing an assortment of raw rock specimens.
Lot 179: Lapidary Rock Saw and Grinding Equipment with Assorted Rough Stones
A lapidary workstation featuring a motorized saw unit powered by a General Electric washing machine motor. The setup includes a collection of rough stones housed in a plastic crate, a Roi-Tan product box containing dop sticks, and an Avalon Bottle 'n Jug cutting kit. The equipment is mounted on a green cabinet base.
Lot 180: Fram-Tom Lapidary Grinding and Polishing Unit with Rock Assortment
A Fram-Tom lapidary machine featuring a belt-driven motor, grinding wheels, and a water drip system. The unit is mounted on a wooden cabinet base. Included with the machine is a plastic crate containing an assortment of raw rocks and mineral specimens.
Lot 180A: Assorted Household Storage Containers and Miscellaneous Items
A collection of various household storage items, including plastic milk crates branded Pevely St. Louis, MO, glass jugs, cardboard boxes, and assorted containers. The lot contains various household supplies, including empty jars, plastic containers, and miscellaneous hardware items as shown in the images.
Lot 181: Graphite
A plastic storage container full of graphite.The jar contains a dark, granular substance with a reflective, metallic-like texture known as graphite. Used for lithium ion batteries, lubricants, and pencils. Form of carbon and handles heat well and conducts electricity.
Lot 182: Pegboard Panels
A collection of multiple pegboard panels featuring a standard grid of pre-drilled holes for storage and organization applications. The panels are constructed from compressed fiberboard material.
Lot 183: ADT Security Control Unit with DC Milliammeter and Wiring
An ADT security control unit featuring a front-mounted DC milliammeter, line adjust knob, and key-operated test switch. The unit includes an integrated instruction panel detailing closing and opening procedures. The lot includes a quantity of associated electrical wiring and cabling. Unknown working conditions
Lot 184: Collection of Square Wood Parquet Flooring Tiles
A large quantity of square wood parquet flooring tiles stacked in multiple columns. The tiles feature a layered construction with a wood veneer surface. Various pieces show signs of previous installation, including adhesive residue on the undersides and surface marks.
Lot 185: Assorted Electrical Components Including Hubbell Floor Boxes and Square D Transformer
This lot features a collection of electrical hardware, including multiple Hubbell floor box assemblies with brass covers and mounting hardware. Also included is a Square D Company 121AC transformer, 16 volt AC-15 watt, in its original retail packaging, along with additional brass circular plates and a metal housing unit.
Lot 186: Manhattan Coffee Co. Two-Burner Electric Stove with Metal Stand and Assorted Components
A two-burner electric stove featuring a Manhattan Coffee Co. identification plate. The lot includes a metal equipment stand, a box containing various electrical components, wiring, and fan parts, and additional loose metal rods. The stove unit is finished in a neutral tone and includes toggle switches for heat control.
Lot 187: AMF DeWalt Power Shop Radial Arm Saw Component
An AMF DeWalt Power Shop radial arm saw assembly. Includes the main arm, base, and associated mechanical components as shown in the images. Manufactured by the DeWalt Division of American Machine & Foundry Co., Lancaster, Pennsylvania. Features a measurement scale on the arm and various adjustment handles.
Lot Location: Middle
Important Information
This is an Online-Only Auction
NO SHIPPING on large or bulk building materials or lumber.
No one is to ever be on the property unless it is on the preview day or pick up day. Private Property. Cameras are in use.
Buyers are responsible for bringing the necessary tools, manpower, trailers and equipment needed to safely remove their purchased items from the property. Aumann Auctions cannot guarantee that there will be assistance at all times to load your items.
Don't miss this opportunity to stock up on quality lumber, tools, and building supplies. Register, bid online, and take advantage of this exceptional auction!
No items were tested, plugged in or turned on. Unknown working conditions
20114 Illinois 16
Nokomis, IL
62075
This machinery consignment auction is held online only, closing August 26 at 6pm CT. Auction includes 2025 PJ 36 ft. flatbed gooseneck, Kinze 3600 series 16/31, 1976 GMC 6500 grain truck, 1000 gallon stainless steel tank and John Deere combine head parts. Items located in Mt. Olive, IL.
Capps & others (west side) online only auction offering a Lenox spice village & rack, Salvador Dali Adolescence etching print, antique oak dresser with ornate mirror, antique Rand McNally maps in case, letterpress printers tray, Canon digital Rebel, Hedstrom rocking horse, popcorn machine, Marigold Carnival glass, die cast model cars, Fenton glass bells & hobnail shoes, marbles, vintage hats & hat box, African mask sculptures, Longaberger baskets & more. Auction begins to close on August 11th at 5:30ppm CT.
This automotive online auction, closes August 24 at 7pm CT. Includes 2016 Hyundai Sonata SE sedan, 2010 Ford Explore Sport Trac, 2012 Dodge Avenger, 1975 Mercedes-Benz, 1971 Yamaha G6S 80 motor bike, 20' 2013 Interstate cargo trailer, 1969 Chevrolet C50 w/roll back, 1970 Air Stream 31' Sovereign camper & motorbikes. Located in Mattoon, IL.