Wood by Whiskers Liquidation Online Only Auction

Wood by Whiskers Liquidation Online Only Auction

Bidding ends September 16 at 6:30pm CT

2295 50th St Somerset, WI 54025

NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.

OPEN HOUSES: Tuesday, September 8th from 3-5pm & Wednesday, September 16th from 3-5pm

#1 - 1994 Wells Cargo 24ft tandem axle car trailer (with title)

92"W rear drop ramp, 95"W x 85.5"H interior, cabinets in front, lighting, 2-5/16" hitch, heater, propane tanks, electrical hookup, VIN: 1WC200L25R1065744

#1A - Located at 2295 50th St Somerset, WI 54025

Please do not attempt to view items outside of open house times. Thank you.

#1B - Open Houses: Tuesday, September 8th from 3-5pm & Wednesday, September 16th from 3-5pm

This is the only time for viewing. Do not attempt to access the property outside of these viewing times.

#1C - Day 1 Pickup is Thursday, September 17th from 10am-5pm

Small items must be removed on this day. Only people who purchase large items for day 2 removal may came day 2.

#1D - Day 2 Pickup is Friday, September 18th from 10am-2pm

This is for removal of large items only. Loading will be on a first come first serve basis.

#1E - We will haul small items only. NO HAULING LARGE ITEMS OR GROUPS. Hauling fees will apply

We will NOT haul any large items or any group lots. Your credit card will be charged if any hauling occurs.

#1F - Please bring assistance to help with loading.

We have minimal staff available. Buyer's are responsible for removal and loading of large items.

#1G - There will only be a loader available on Friday, September 18th ONLY.

There will be no loading assistance for large items available on the first day of pickup.

#2 - Altendorf 76-5-126 sliding table saw (day 2 removal only)

3-phase, with outfeed table, 11.5'W x 11'L, buyer responsible for any disassembly

#3 - Craftsman 1/2hp floor drill press

1/2" chuck, 71.5"H

#4 - Yates American Y36 36" band saw (buyer to arrange for own removal)

3-phase, 10hp, with extra cutting tool, 7'W x 104"H (weighs approximately 4000lbs)

#5 - 13" Band saw on stand

2hp, 115/230V, 93.5" cutting tool, with extra cutting tool, 66"H

#6 - Rockwell Delta 20" band saw (day 2 removal only)

with built in cutting tool welder, 3-phase, with extra cutting tool, 79"H (power feed not included)

#6A - Northtech NT-BSF-17-3 resaw feeder

3-phase, 1/3hp, buyer responsible for removal

#7 - Her-Saf panel router table (day 2 removal only)

with router, with jigs and bits, 10'W x 100"H

#8 - Brandt KD68 edge banding machine (day 2 removal only)

3-phase, 141"L (does not included roll table in length), buyer responsible for any disassembly

#9 - Ritter Manufacturing R200 single spindle pocket hole boring machine (day 2 removal only)

standard plug, air hook up, 35"L table

#10 - Delta 10" table saw with Rockler router table insert with router (day 2 removal only)

3-phase saw, with jigs, 90"W

#11 - Timesaver model 137HD belt sander (day 2 removal only)

3-phase, 35.5"W belts, with extra belts, wood outfeed table, 78"W overall, buyer responsible for any disassembly

#12 - Rankin Brothers 15" disc sander

3-phase, with extra discs, 51"H

#13 - Yates American B44 planer (buyer to arrange for own removal)

24"W feed table, 3-phase, with cutting tool sharpener attachment, 60"W

#14 - Rolling hydraulic shop press (day 2 removal only)

manual or air driven, with blocking, 80"H x 56"W

#15 - Delta 6" jointer on stand

115/230V, 32.5"L table

#16 - Rolling A-frame overhead crane stand (day 2 removal only)

135.5"W, adjustable height

#17 - CM model F electric chain hoist

1/2-ton capacity, 1/2hp, 110-120V (trolley not included)

#17A - CM Series 632 trolley

adjustable, 1-ton capacity

#18 - Northern Industrial chain hoist

1-ton capacity (trolley not included)

#18A - CM Series 632 trolley

adjustable, 1-ton capacity

#19 - Ritter R200 air actuated clamp table (day 2 removal only)

12'L x 5'H platform, with (5) clamps

#20 - Delta heavy duty shaper (day 2 removal only)

3-phase, 27"W, with fence (power feed not included)

#21 - Delta Versa-Feeder

model 36-865, 120V (to be removed by buyer)

#22 - Invicta TI-14 heavy duty tilting spindle shaper (day 2 removal only)

3-phase, 43"W, sliding table, with jigs (power feed not included)

#23 - Holz-Her power feeder

3-phase 460V, with stand (to be removed by buyer)

#24 - 4" Belt sander on stand (day 2 removal only)

3-phase, tilting table, with jigs, 42"W

#25 - Powermatic 60 heavy duty 8" jointer (day 2 removal only)

with extra cutting tool, 3-phase, 64"L table

#26 - Griggio T200 heavy duty single spindle wood shaper (day 2 removal only)

3-phase, with fence, 51"W

#27 - Material roller stand

11"W roller, adjustable height

#28 - Delta heavy duty shaper (day 2 removal only)

3-phase, 27"W, with fence

#29 - Graco HVLP 4900 sprayer

with hose and nozzles

#30 - Rolling vacuum table (day 2 removal only)

103"W, adjustable angle

#31 - Wilkerson compressed air dryer (day 2 removal only)

model WRA-0015-1-0, buyer responsible for removal

#31A - Heavy duty 3-phase upright air compressor (day 2 removal only)

3-phase, 73"H

#32 - DeWalt 12" radial arm saw with laminate top (day 2 removal only)

203"L laminate top (to be removed by buyer), cabinets not included

#33 - Heavy duty sand blaster cabinet with dust collector (day 2 removal only)

43"W (blasting media not included)

#34 - Cyclone dust collection system with ducting (day 2 removal only)

with Rockler wireless controller, on stand 145"H, buyer responsible for disassembly and electrical disconnect

#35 - Tannewitz XJSW heavy duty tilting arbor table saw (day 2 removal only)

3-phase, sliding table with fence, 72"W (power feed not included)

#36 - Nandina AP-34H power feeder

3-phase plug (motor says 230V), to be removed by buyer

#37 - Makita LS1400 355mm miter saw on table

with Rockler stops, 103"W

#38 - Miller SR-400-32 direct current arc welder (day 2 removal only)

230/460V, 3-phase, on cart, with Bernard cooler

#39 - Ridgid TS3650 10" table saw on stand

with guide, 64"W

#40 - Ritter Manufacturing R-12F 12-head multi spindle boring press (day 2 removal only)

3-phase, 10'W overall

#41 - Blum Minipress 130 cabinet hinge drill press (day 2 removal only)

3-phase, with jigs, on cabinet, 40.5"W cabinet, buyer responsible for electrical disconnect

#42 - Machinist drill press vise

2.5" jaws

#43 - Machinist drill press vise

4" jaws

#44 - Hilti TE22 hammer drill

with bits, in case

#45 - Schumacher speed charge battery charger

for 6 and 12-volt batteries

#46 - Schlage door knob drill guide

adjustable

#47 - Ridgid pipe threader

3/8"-1"

#48 - Hilti TE60 hammer drill

in case

#49 - OTC 8-piece brake tool set

model 6516

#50 - Milwaukee sawzall reciprocating saw

model 6517, with cutting tool, in case

#51 - OTC 5-piece separator tool set

model 6299

#52 - Weslock door knob boring kit

model 178

#53 - Hilti DX350 power fastener

with loads and nails, in case

#54 - (2) Black & Decker tools

including planer/router kit and reciprocating saw

#55 - Craftsman wet sharp machine

model 966995

#56 - Shop group

including barrel cart and bumper jack

#57 - Floor jack

works

#58 - (2) Pro-Lift jack stands

6-ton capacity

#59 - (4) Haul Master vehicle dollies

1500lb capacity

#60 - Indy 5 bottle jack

22-ton capacity

#61 - (2) Larin jack stands

6-ton capacity

#62 - (2) Hand pump sprayers

up to 3-gallon

#63 - Pail of screws

1-3/16"

#64 - Hardware group

including coaxial cable fittings and crimping tool

#65 - Black & Decker No. 18 metal shear

in wood box

#66 - Black & Decker hinge butt plate template

in case

#67 - Porter Cable cutout tool

model 7499

#68 - Small metal shear

2" cutting tool

#69 - (2) Routers

assorted

#70 - Panasonic 12V cordless metal saw

4-3/8" drill, extra cutting tool, (2) batteries and charger

#71 - Torch group

including propane

#72 - Porter Cable drill with Quick-Drive screw attachment

in case

#73 - 7/16" In-line air drill

with buffing pads

#74 - Group of Quick-Drive screws

1.25"

#75 - Keen Kutter hunting item

4.25" cutting tool

#76 - Shop group

including wiring, metal tool box and hardware

#77 - Dietzgen transit level

with tripod, in case

#78 - Hardware group

including cement fasteners and electric stapler

#79 - Shop group

including rope, yard flags and 120ft fish tape

#80 - (2) Porter Cable laminate routers

model 3101

#81 - (2) Ridgid pipe tools

including 1/8"-2" cutter and 18" pipe wrench

#82 - (2) Porter Cable laminate routers

model 3101

#83 - Ridgid and Fuller pipe wrenches

18"

#84 - (2) Laminate routers

assorted

#85 - Porter Cable laminate router

with offset base

#86 - Bolt cutter

24"

#87 - (2) Quick-Grip bar clamps

24" capacity

#88 - Rockler Interlock sign maker's template

2.25" state park kit

#89 - (3) Bar clamps

6" Capacity

#90 - (4) Bar clamps

6" Capacity

#91 - (2) Angle grinders

including DeWalt and Chicago Electric

#92 - (4) Vise Grip locking pliers

11SP

#93 - Flat of spring clamps

up to 3"

#94 - (2) Quick-Grip bar clamps

12" capacity

#95 - (4) Vise Grip locking pliers

11SP

#96 - (4) Vise Grip locking pliers

11SP

#97 - (4) Quick-Grip bar clamps

12" capacity

#98 - Group of packing blankets

assorted

#99 - Tote with packing blankets

assorted

#100 - Central Machinery 6" buffer

3450-rpm, 120V, 1/2" arbor

#101 - (2) Vise Grip locking pliers

18SP

#102 - (4) C-clamps

4" capacity

#103 - (2) Vise Grip locking pliers

18DR

#104 - (4) Vise Grip locking pliers

11SP

#105 - (4) C-clamps

4" capacity

#106 - (4) Vise Grip locking pliers

11SP

#107 - (4) Bessey bar clamps

4" capacity

#108 - (4) Vise Grip locking pliers

11SP

#109 - (4) C-clamps

4" capacity

#110 - (4) Vise Grip locking pliers

11SP

#111 - (4) C-clamps

4" capacity

#112 - Foredom 5240 professional flexible shaft woodcarving kit

in box

#113 - (4) C-clamps

5" capacity

#114 - (4) C-clamps

4" capacity

#115 - Flat of spring clamps

2" capacity

#116 - Beaded seat cushion

51" x 16"

#117 - Flat of spring clamps

2" capacity

#118 - Flat of spring clamps

2" capacity

#119 - Tool box group

including Huot 20" tool box with wrenches and fittings

#120 - Plano 20" plastic tool box with plumbing supplies

including pipe cutter, solder, flaring tools and brushes

#121 - Chicago Electric stud welder

with slide hammer and some studs

#122 - Steering column

with key

#123 - Group of extension cords

assorted

#124 - (4) swivel caster wheels

5"

#125 - (4) swivel caster wheels

5"

#126 - (4) swivel caster wheels

5"

#127 - Stanley clamp on bench vise

3" jaws

#128 - (4) Vise Grip locking pliers

11SP

#128A - (2) Pails of Grip Fast coarse thread drywall screws

2" and 1-5/8"

#129 - (2) Hormel die-cast banks

up to 8"L

#130 - (4) C-clamps

4" capacity

#131 - Hardware group

including bolt bins and screws up to 3.25"

#132 - Collectibles group

including porcelain truck and woody 10"L and 1949 Ford Woody Wagon 1/38th scale

#133 - Group of screws

assorted

#134 - Motor Max 1949 Ford Woody Wagon die cast car

1/24th scale, in box

#135 - Hot Wheels 1950 Mercury Woodie die cast car

1/18th scale, in box

#136 - (4) Babco Tools c-clamps

5" capacity

#137 - Group of tools

including mallet, locking pliers and hammer

#138 - Box of screws

2"

#139 - Pail of screws

2-1/2"

#140 - Trim-Lok tape back weatherstripping

3/4"W

#141 - Group of puzzles and frame

assorted

#142 - (6) Bar clamps

up to 36" capacity

#143 - (7) Pipe clamps

up to 52" capacity

#144 - (6) Pipe clamps

up to 44" capacity

#145 - Group of wood

including red oak, up to 100"L

#146 - Group of wood

up to 101"L

#147 - Group of wood

up to 101"L

#148 - Group of wood

up to 101"L x 6"W

#149 - Group of wood

up to 101"L

#150 - Group of wood

up to 101"L

#151 - Metal rolling cart

32.25" x 49"L x 43"H (to be removed after 3pm)

#152 - Appliance cart

24"W platform

#153 - Group of wood

including red oak, up to 39.75" x 11.25"D stair treads

#154 - Rockler rolling cart

adjustable, 38"W

#155 - (2) Pry bars

up to 29.25"L

#156 - (6) Pipe clamps

up to 53" capacity

#157 - (4) Pipe clamps

up to 66" capacity

#158 - (6) Pipe clamps

up to 55" capacity

#159 - Rolling pipe clamp cart

73"H x 44"W x 25.75"D

#160 - Rockler dovetail jig

with handmade wood jig attachment

#161 - Railroad iron

9.75"L

#162 - Mini anvil

7.25"L

#163 - General Electric electric stove

with long cord

#164 - (2) Large Rubbermaid totes with covers

41"L

#165 - Group of totes

assorted

#166 - Shop group

including pails, hardware trays and box fans

#167 - (9) Wood clamps on rolling stand

adjustable height stand

#168 - Shop group

including rolling stands and work light

#169 - Pallet jack

48"L tines

#170 - Model A upholstered seat with center arm rest

42"W

#171 - (2) Goodyear Racing mechanics stools

adjustable, have seat wear

#172 - Group of supplies

including foam backed tape and trim

#173 - Steel cart with treadmill frame

cart is 60.25"L x 24"W

#174 - OTC Stinger collision repair set

10-ton capacity, model 1515A

#175 - Group of trim panels for woodies

assorted

#176 - Group of metal and trim

assorted

#177 - (2) Tools

including shovel and pry tool

#178 - (2) Fire extinguishers

charged

#179 - Group of metal and trim

up to 81"L

#180 - Handmade oak office cabinet with office supplies

72"W x 18"D x 72.25"H

#181 - Drafting desk group

including rolling office chair, drafting supplies and desk 72"L x 32"D x 30.75"H

#182 - Group of metal and trim

up to 12'L

#183 - Air group

including hose and air fittings

#184 - 4-Wheel cart

24.25"L x 18.25"W x 33.75"H

#185 - Group of paneling

including slat wall, up to 5ft x 8ft

#186 - Group of sheeting

including oak and birch, up to 4ft x 8ft

#187 - Group of sheeting

including plywood and MDF, up to 4ft x 8ft

#188 - Group of sheeting

including Mahogany, birch and maple, up to 4ft x 8ft

#189 - Group of sheeting

including maple and hickory, up to 4ft x 8ft

#190 - Group of sheeting

up to 3/4" x 4ft x 8ft

#191 - Group of sheeting

up to 4ft x 8ft

#192 - Aluminum I-beam

6"W x 6"H x 107.5"L

#193 - (7) Pipe clamps

up to 130" capacity

#194 - Group of wood paneling

up to 8ft

#195 - Group of materials

including 28.75" x 77" PVC panels

#196 - Group of foam board

up to 2" x 4ft x 8ft

#197 - (2) Shelves of MDF and OSB sheeting

up to 4ft x 8ft

#198 - Steel pallet racking (day 2 removal only)

42"D x 112"L x 96"H

#199 - (2) Ratchet straps

2"

#200 - (2) Ratchet straps

2"

#201 - Cable come-a-long

works

#202 - Group of ratchet straps and sling

2"

#203 - Group on lower cart

including bungee cords and trim coil

#204 - 4-Wheel shop cart

49.25"L x 32.5"W x 35.25"H

#205 - Ford 302 motor

with overdrive transmission

#206 - Meilink combination safe (no combination)

16.5"W x 22"H x 14"D

#207 - Group of steel

including gear tooth bars 73"L

#208 - Group of bamboo reed paneling

6'H

#209 - Chevrolet hood

unknown fit

#210 - Group of metal sheeting and laminate

assorted

#211 - (2) Barrett 4-wheel carts

18" x 30.5"

#212 - OTC Stinger motorcycle/ATV jack

1500lb capacity

#213 - Rolling engine stand

31.75"L, folds for storage

#214 - Rolling engine hoist

5000lb capacity

#215 - Dayton pedestal shop fan

30"

#216 - Simplicity 1390 Sno-Away gas snow blower

13hp, electric start, 38" path

#217 - Group of fluorescent lights

4ft and 8ft

#218 - Steel table top

77"L x 20"W

#219 - (6) Floor mats

up to 24" x 130"

#220 - Aluminum trim

10'L

#221 - Royal shipping scale

400lb capacity

#222 - Shop group

including woodworking books and clipboards

#223 - Group on post (hose not included)

including shovels, scraper, squeegees and brooms

#224 - Air hose with nozzle

3/8"

#225 - (3) Floor mats

up to 27" x 59"

#226 - 4-Wheel shop cart

48"L x 30"W

#227 - Werner aluminum step stool

2ft

#228 - Aluminum step ladder

6ft

#229 - Group of oak beams

up to 116.5"L x 5.5" x 3.5"

#230 - Tool group

including Central Machinery bead roller kit and knee kicker

#231 - Group of electric motors and control panel

assorted

#232 - Delta power feeder

model 36-865

#233 - Aluminum ladder platform

11"W

#234 - Group of hardware

including peg hooks, sliding door pulls, wire covering and wall socket kits for rods

#235 - (2) Electric motors

assorted

#236 - Group of 1936 Ford truck trim

assorted

#237 - Homemade table group

including 4ft x 8ft OSB sheet and (2) saw horses

#238 - Shop group

including 3ft wood step ladder and 4-wheel cart

#239 - (3) Conduit benders

up to 1.25"

#240 - Wood cabinet with wood jigs

cabinet is 29.25"W

#241 - Pail of electrical

including tester and hardware

#242 - OTC slide hammer puller set

model 1181

#243 - Jet I-beam clamp

model JBC-1, 1-ton capacity, up to 8.66"

#244 - Boomer door closer

in box

#245 - LCN door closer

in box

#246 - Group on table

including wiring, trim, solder hunting items, wire and soldering supplies

#247 - Homemade table group

including 4ft x 8ft OSB sheet and (2) saw horses

#248 - Portable air tank

25"L

#249 - (2) Wood bins with hardware

assorted

#250 - Group of glue pellets

in pails

#251 - Wood steamer box on cart

85"L

#252 - Group of tarps

assorted

#253 - Group of aluminum

assorted, up to 47"L

#253A - (3) Wood wall cabinets

48"W x 16"D x 48"H (to be removed by buyer)

#254 - Group of edge banding

assorted

#255 - Group of dust collector ducting

mostly 4"

#256 - Heavy duty extension cord

50A/250V

#257 - Clevis

3/4"

#258 - SpeeCo hitch pin

7/8" x 6.5"

#259 - SpeeCo hitch pin

7/8" x 6.5"

#260 - Hanging hook

23.5"W

#261 - Hanging hook

23.5"W

#262 - SpeeCo hitch pin

7/8" x 6.5"

#263 - SpeeCo hitch pin

7/8" x 6.5"

#264 - Group of electrical

including metal shelf, wire ,breakers and electrical panel

#265 - Group of steel table legs

12'L legs, approximately 5ft x 10ft sheet

#266 - (2) Wood steam/heater boxes

up to 12'L

#267 - CM model F electric chain hoist

1/2-ton capacity, 1/2hp, 110-120V (trolley not included)

#268 - Cement tool group

including cement float and trowel, in wood box

#269 - (6) Bar clamps

up to 36" capacity

#270 - (6) Pipe clamps

up to 38" capacity

#271 - (5) Bar clamps

up to 24" capacity

#272 - (5) Bar clamps

up to 31" capacity

#273 - Pattern maker's vise

new in box

#274 - Titan cutting tool straight bore moulder head

with assorted cutting tools up to 6-3/8"L, 4" x 1.25" bore

#275 - Freeborn 6-piece flat panel cope and pattern heads

3/4"

#276 - Amana Tool moulding head

3" x 1.25" bore

#277 - Amana Tool spiral planning cutter and SMI cutter

3" x 1.25" bore and 2" x 1.25" bore

#278 - Group of planer heads

3/4" bore

#279 - Group of planer heads

1.25" bore

#280 - (3) Planer heads

1.25" bore

#281 - Group of planer heads

1.25" and 3/4" bores

#282 - Group of planer heads

1.25" and 3/4" bores

#283 - Group of moulding machine parts and bearings

assorted

#284 - (2) Moulding heads

3/4" bore

#285 - Moulding head

3/4" bore

#286 - Group of moulding heads

3/4" bore

#287 - Moulding head

3/4" bore

#288 - Group of moulding heads

3/4" and 1.25" bores

#289 - Group of moulding heads

3/4" bore

#290 - (2) Moulding heads

3/4" bore

#291 - Freud glue joint cutter

1.25" bore

#292 - Group of moulding heads

3/4" bore

#293 - Yuasa dial gage

in case

#294 - Amana Tool shaper cutter

2" x 3/4" bore

#295 - WKW dado hunting set

5-7/8" hunting set

#296 - Amana Tool shaper cutter

1" x 1.25" bore

#297 - (2) Aluminum jigs

assorted

#298 - Rolling 3-drawer cabinet

28.5"W x 17.5"D x 25.25"H

#298A - Group on post

including brooms and dust pan

#299 - Group of plastic trays for drawer backs under sink

up to 72"L

#300 - Group of copper tubing

up to 71"L

#301 - Roll of 10-2 NM-B wire

partial box

#302 - (2) Rolls of wire

including 10-3 AG10 with ground

#303 - (4) Pails of paint and sealer

assorted, some partial

#304 - (2) Totes with contents

including tarp and drop cloth

#305 - Shelf of hardware

including nails

#306 - Shelf of electrical

including power panels, conduit and Cat 5 cable

#307 - Metal shelf unit

4'W x 18.5"D x 48"H (to be removed after 3pm)

#308 - Contents of shelving

including paints, stains and paint supplies

#309 - Metal shelf unit

48"W x 18.5"D x 84"H (to be removed after 3pm)

#310 - Group of laminate and wood saw horses

assorted

#311 - Group of metal

including aluminum, up to 12'L

#312 - Group of lumber

including poplar, up to 16'L

#313 - (2) Large walnut planks

up to 2" x 8" x 16'L

#314 - Group of oak boards

up to 9'L

#315 - Group of lumber

mostly maple, up to 9'L

#316 - Group of lumber

including maple, up to 100"L

#317 - Group of lumber

including maple and birch, up to 97"L

#318 - Group of lumber

including walnut, pine and oak, up to 114"L

#319 - Group of lumber

including maple, redwood and alder, up to 145.5"L

#320 - Group of lumber

including cherry, basswood, ash and oak, up to 10'L

#321 - Group of lumber

including cherry and oak, up to 100"L

#322 - Group of lumber

including birch, hickory and maple, up to 104"L

#323 - Steel material rack (remove day 2 only)

99.5"L x 62"W x 90"H

#324 - Contents of upper cabinet

including paints, stains and cleaners

No image

#324A - Pressed wood cabinets (remove day 2 only)

72"W x 14"D x 51"H, buyer responsible for uninstalling

#325 - Heath Zenith security floodlight

model SL-5505-BZ

#326 - Heath Zenith security floodlight

model SL-5505-BZ

#327 - cutting tool floor scraper

8"

#328 - Contents of lower cabinets

including plastic, towels, paint trays, paints and stands

#328A - Lower base cabinet (day 2 removal only)

84"W x 36.75"D x 35"H, buyer responsible for uninstalling

#329 - Tool group

including parts washer pump and powder coating system

#330 - (2) Air hoses

3/8"

#331 - Coleman camping group

including lantern and 2-burner stove

#332 - Antique oak wall phone

24"H, loose board on front, handset wire is cut

#333 - Contents of lower cabinet

including cleaners, paints and shop supplies

#333A - Lower base cabinet (day 2 removal only)

84"W x 36.75"D x 35"H, buyer responsible for uninstalling

#334 - Strong Way shop fan

20", to be removed by buyer

#335 - Group on post

including Northern Industrial 8" bench grinder, face shield and jigs

#336 - (2) Air hoses

3/8"

#337 - Ryobi 14" metal cut off saw

model C356

#338 - Steel rolling table

36"W x 23.5"D x 35.5"H

#339 - (2) Bags of Black Blast abrasive

50lbs each

#340 - (2) Bags of Black Blast abrasive

50lbs each

#341 - Group of lumber and trim

assorted

#342 - Group of lumber and sign post

up to 80"H

#343 - Contents of (3) shelves

including lumber, insulation, jigs and radiator covers

#344 - Craftsman 12" wood lathe

40"L capacity, with electric motor and lathe tools

#345 - Shop group

including metal drawers, pails, paint pot and fan (motor is bad)

#346 - Group on upper shelf

including tote, drywall tools and saws

#347 - Contents of shelf

including wood trim and jigs

#348 - Drywall group

including texture hunting item and cutting tools

#349 - Group of wine making supplies

including bottle and accessories

#350 - Wine group

including bottles

#351 - Set of pallet racking (day 2 removal only)

including (2) uprights 42"W x 115"H, (1) upright 42"W x 96"H, (6) crossmembers 12'6"L and (4) crossmembers 8'L (to be removed by buyer)

#352 - Fishing group

including minnow pails

#353 - Roll of landscape fabric

36"W

#354 - Group of cable

with Gleason reels

#355 - Remington electric chainsaw

model RM1630W, 16" bar

#356 - Delta 10" power miter box

model MS210

#357 - Trac Master miter saw stand

54.5"L

#358 - Tool group

including saw cutting tool up to 12" and tile cutter

#359 - Propane cooker

15"H

#360 - Miller spot welder

230V

#361 - Metal 2-drawer file cabinet on cart

with contents of hardware

#362 - Central Machinery mini lathe

110V, 7" x 10", with tooling

#363 - Rolling wood cabinet with metal drawers

28.25"W x 20.25"D x 35.75"H

#364 - Central Machinery compact floor tubing bencher

model 38470, to be removed by buyer

#365 - (2) hold down clamp sets

up to 64"L

#366 - Metal shop cart with contents of lower shelf

24"L

#367 - Northern Industrial 20-gallon sand blaster

with face shield

#368 - Stihl 044 gas chainsaw in case

20" bar

#369 - Onan gas generator on cart

120V, on wood cart

#370 - Fliteway pancake air compressor

3/4hp, with hose

#371 - Group of abrasive disks

7"

#372 - Rolling wood cart with jigs for woodie panels

assorted

#373 - Metal cart with woodie panel jigs

assorted

#374 - Metal cart with woodie panel jigs and tote

assorted

#375 - Group of extension cords

assorted

#376 - Lincoln Electric Sp-135 Plus wire feed welder

on cart, 115V

#377 - Scribing stand with router

38"W, with hunting item stock jig attachment

#378 - Welding group

including Weldcraft WP-18-12 torch package and welding mask

#379 - Group of tools

including pry bar, roofing hunting item and hammer

#380 - MVP Pro-Lift bottle jack

6-ton capacity

#381 - Group of flex copper tubing

1/4" and 3/48"

#382 - Group of welding rod

assorted

#383 - Shop group

including 27.5"W tool box and tool belt

#384 - (2) Air hoses

1/4"

#385 - Eastwood stretcher and shrinker

1.75"W

#386 - Central Machinery bending brake

30" capacity

#387 - Craftsman molding head and dado cutting tool

7"

#388 - Wood shop table (day 2 removal only)

with wood jigs, 60"W x 48"D x 34.25"H

#389 - Torch tank

with hose and torch

#390 - Torch tank

with hose and torch

#391 - Shop group

including g6-gallon water can, small gas cand and oil catch pan

#392 - Group of saw cutting tool

up to 16"

#393 - Delta tenoning jig for table saw

on wood base

#394 - Stanley No. 71 planer

with extra cutting tool

#395 - Group of saw cutting tool

up to 10"

#396 - Mortising jig in drawer

with assorted parts

#397 - Contents of (4) drawers

including saw cutting tool, router parts and clamps

#398 - 6-Drawer wood cabinet

33.5"W x 24"D x 31"H (to be removed after 3pm)

#399 - Group of sharpened saw cutting tool

up to 14"

#400 - Antique oak child's rocker

29.5"H

#401 - Tenoning jig

no clamp handle

#402 - Homemade rolling wood dust collection cabinet

28"W x 35"H

#403 - Cosco step stool

2-step

#404 - Mr. Nozzle vac tool kit

in box

#405 - Chain binder

5/16"-3/8"

#406 - 5/16" chain with hooks

12ft

#407 - Shop grou0p

including tape and shrink wrap

#408 - Tote of extension cords

assorted

#409 - 3M Scotch-Weld adhesive tools

with glue sticks

#410 - (2) Boxes of abrasive discs

6"

#411 - Lamello Top 10 biscuit jointer

with biscuits

#412 - Flat of new drill bits

assorted

#413 - (8) Vortex bits

up to 1/2"

#414 - National Detroit air disc sander

6"

#415 - Flat of drill bits

assorted

#416 - Glass suction cup in case

8"W

#417 - Haul Master hitch pin

5/8" x 4"

#418 - Flat of tooling

including dowel jigs, tape measures and small planes

#419 - DeWalt 4.5" angle grinder

model DW402

#420 - (2) Air tools

including die grinder and 3/8" drill

#421 - Group of large drill bits

up to 7/8"

#422 - Tool group

including cone bits

#423 - Set of Fisch drill bits

up to 1/2"

#424 - Set of forstner bits

up to 2-1/8"

#425 - (2) Air tools

including 3/8" right angle drill and 3/8" drill

#426 - Campbell Hausfeld air nibbler

model PL151900AV

#427 - Straight line air sander

with assorted sanding sheets

#428 - Sioux Chef crimper

1" and 3/4"

#429 - Ingersoll Rand air buffer

8"

#430 - Drill Master 7" polisher/sander

model 60626

#431 - Dynabrade Dyninger air abrasive finishing tool

model 52060

#432 - (2) Wood chisels

including Barr 1.25"W and right angle

#433 - (10) Forstner bits

up to 3"

#434 - Great Stuff sealing hunting item

with sealant

#435 - Large woodworker's chisel

2.5"W

#436 - Veritas set-up blocks

3" block

#437 - Box of abrasive disks

4.5"

#438 - Astro Pneumatic 7/32" straight grip punch/flange tool

model 600ST

#439 - Rolling wood down draft sanding table (day 2 removal only)

91"W x 36"D x 37"H

#440 - Porter Cable router edge guide

model 42700

#441 - Group of drill bits

including plug cutters and centering

#442 - Group of long shank drill bits

up to 1/2", 11.5"L

#443 - Index drill bit set

near complete, up to 1/2"

#444 - (2) Irwin auger bits

3/4" and 1", 17"L

#445 - Flat of files

assorted

#446 - Flat of hole saw bits

up to 4.5"

#447 - Flat of tools

including wire brushes, flap wheel and die grinder bits

#448 - Flat of tools

including chuck keys and driver bits

#449 - Flat of tools

including saws, rasp, hammer and chisels

#450 - Flat of tools

including drill bits and sanders

No image

#451 - Flat of tools

including air auto hammer, air fittings and square

#452 - Flat of tools

including pipe wrench, cutters, hex wrenches and cutting tool

#453 - (2) Air tools

including 3m random orbit sander and 3/8" drill

#454 - (2) Air tools

including 6" random orbit sander and 3/8" drill

#455 - Flat of woodworking tools

including scrapers, jigs and tape measures

#456 - (3) Vise Grip locking pliers

11SP

#457 - Drill Doctor in case

model 750X

#458 - (2) Air tools

including random orbit sander and 3/8" drill

#459 - Milwaukee router

model 48-10-0070

#460 - Porter Cable router edge guide

model 7519

#461 - Spacers for drawer slides

1.25"

#462 - Senco air framing nailer in case

Finish Pro 41XP

#463 - Airy 20-gage medium crown air stapler in case

model 12024

#464 - Senco 18-gauge air brad nailer in case

model SLP20

#465 - (2) Senco air staplers

model MW and model K

#466 - Porter Cable router on homemade wood jig

36"W

#467 - Parts washer

damaged hose on pump, 29.75"W

#468 - Stihl KM55RC gas trimmer

with tiller and edging attachment

#469 - 3-Phase extension cord

with different plug and socket

#470 - (5) Boxes of Paslode brad nails

7/8"

#471 - (4) Boxes of Paslode brad nails

7/8"

#472 - (5) Boxes of Paslode brad nails

1.25"

#473 - Small torch set

with tanks, hose and torch head

#474 - Roll of paper

30"W

#475 - Plastic banding on wood cart

with tooling and clips

#476 - (3) Air hoses

3/8"

#477 - Porter Cable on homemade jig cabinet

26"W

#478 - Group on wall

including 6ft level, straight edges and ruler

#479 - Blum Metafix air clamp on wood cabinet

with assorted jigs, 48.25"W cabinet

#480 - Group of Blum cabinet hardware

assorted

#481 - Group on outside of cabinet

including straight edges up to 36" and clipboards

#482 - Contents of left side of cabinet

including caulk and hardware

#483 - Contents of right side of cabinet

including spray paints and scuff pads

#483A - Wood wall cabinet (day 2 removal only)

48.5"W x 36"H x 11.5"D (to be removed by buyer)

#484 - Group on wall

including abrasive discs up to 7"

#485 - MIT bench vise with anvil back

4.75" jaws

#486 - (2) Drill bit index sets

up to .413"

#487 - (2) Tools

including electric stapler and Paslode air nailer

#488 - (4) Router bits

up to 1", 1/2" and 5/8" shanks

#490 - (3) Amana Tools router bits

1/2" shank

#491 - (3) Router bits

1/2" shank

#492 - (2) Router bits

1/2" shank

#493 - (4) Router bits

1/2" shank

#494 - (4) Rockler router bits

1/2" shank

#495 - (12) Router bits

1/4" shank

#496 - (12) Router bits

1/4" shank

#497 - (12) Router bits

1/4" shank

#498 - (12) Router bits

1/4" shank

#499 - (12) Router bits

1/4" shank

#500 - (16) Router bits

1/4" shank

#501 - (12) Router bits

1/4" shank

#502 - (6) Router bits

1/2" shank

#503 - (3) Router bits

1/2" shank

#504 - Group of router bits

1/4" and 3/8" shanks

#505 - Contents of (5) drawers

including screws, shelf pins and drawer hardware

#506 - Contents of (3) drawers

including hardware, small router and router parts

#506A - Wood base cabinet (day 2 removal only)

48"W x 25.5"D x 35"H, to be removed by buyer

#507 - Group on upper shelf

including glue and abrasive discs

#508 - Group on bench

including CVA Philadelphia derringer kit in box and riveter with rivets

#509 - Flat of router bits and parts

assorted

#510 - (9) Router bits

1/2" shank

#511 - (9) Router bits

1/2" shank

#512 - (10) Router bits

1/2" shank

#513 - (9) Router bits

1/2" shank

#514 - Letter and number punches

3/32" letters and 1/4" numbers

#515 - (2) Wood is Good Co. rubber mallets

10.5"L

#516 - Veritas honing guide

Mk. II

#517 - (4) Hand saws

up to 21"L

#518 - Freud router bit set

1/2" shank

#519 - Northern Industrial air hydraulic riveter

up to 3/16"

#520 - Porter Cable router with guides

model 7539

#521 - Group under bench

including extension cord, work light, paints and stains

#521A - Large wood counter top (day 2 removal only)

22'10"L x 27"D, with under bench vise, to be removed by buyer

#522 - (4) Hand saws

up to 23"L

#523 - (4) Files

assorted

#524 - Bosch 18V 1/2" drill

with (2) batteries and charger

#525 - Flat of tools

including Rockler hold downs, 8" wire wheel and bender

#526 - Door of tools

including chisels and screwdrivers

#527 - Contents of left side of cabinet

including nails, scraper, adhesives and shop supplies

#528 - Contents of right side of cabinet

including abrasive discs up to 8", putty cutting tools and glue bottles

#529 - Door of tools

including compasses, putty cutting tools, hammer and punches

#530 - (2) Small license plates

7"W

#530A - Wood wall cabinet (day 2 removal only)

48.5"W x 36"H x 11.5"D (to be removed by buyer)

#531 - Shop group

including 1/2" drill, 3/8" drill and screen door closers

#532 - Craftsman heavy-duty turbo nozzle

model 7174399

#533 - Powermate air sander

model 024-0132CT

#534 - Drawer of screws

assorted

#534A - Contents of drawer

including Porter Cable router and router bases

#535 - Contents of (3) drawers

including sharpening stones, plastic bags and hardware

No image

#535A - Wood base cabinet (day 2 removal only)

48"W x 25.5"D x 35"H, to be removed by buyer

#536 - (3) Power tools

including detail sander, iron and finishing sander

#537 - Haier small refrigerator

32"H

#538 - Group on wall

including rubber mallets, jig, saws, rollers and pliers

#538A - Wood base cabinet (day 2 removal only)

48"W x 25.5"D x 35"H, to be removed by buyer

#539 - (5) Bessey corner clamps

(1) is broken

#540 - (2) HOD vacuum cups

4.5" cups

#541 - (4) Bins of hardware

including washers, nuts and bolts

#542 - Delta hollow chisel mortiser with bits

model 14-651

#543 - Group on wall

including jigs, Woody metal sign and Looney Tunes cardboard

#544 - (2) Plastic hardware bins with contents

with nuts, bolts an washers, 14"W (to be removed by buyer)

#545 - (2) Plastic hardware bins with contents

with nuts, bolts an washers, 14"W (to be removed by buyer)

#546 - (2) 14" Plastic bins with hardware

including bolts and screws

#547 - (2) 14" Plastic bins with hardware

including wood cap bolts

#548 - (2) 14" Plastic bins with hardware

including bolts and stainless washers

#549 - (2) 14" Plastic bins with hardware

including wood screws

#550 - (2) 14" Plastic bins with hardware

including screws and bolts

#551 - (2) Wall signs

up to 24"W

#552 - Group of hardware

including wire, bolts and washers

#553 - Drawers of staples and nails

assorted

#554 - Drawer of sanding supplies

including sand paper and wood holders

#555 - (2) Sanders

including Porter Cable belt sander

#556 - Contents of drawer

including hand staplers and punch

#557 - Contents of drawer

including Bosch charger and sanding pads

#558 - Contents of drawer

including 6" sanding discs

#559 - Contents of drawer

including Makita cordless tools with batteries (unknown condition)

#560 - Contents of (2) drawers

including hoses, weatherstripping and adhesives

#561 - Contents of (2) drawers

including metal and aluminum stock

#562 - Contents of drawer

including hardware

#563 - Contents of drawer

including hardware

#563A - Wood base cabinet (day 2 removal only)

48"W x 25.5"D x 35"H, to be removed by buyer

#564 - First Aid cabinet on wall

22.25"H

#565 - (2) 14" Bins with hardware

including nuts and hardware

#566 - (4) 14" Bins with hardware

including bolts, screws and washers

#567 - Group of plastic hardware bins

including screws, springs, set screws and hardware

#568 - Contents of cabinet

including cleaners

#569 - Group on wall

including brushes, mop and cleaners

#570 - Contents of (3) shelves

including cabinet hardware, steel hinges and towels

#571 - Shelf of hardware

including washers and screws

#572 - Group on shelf

including trays, non-slip mats and hardware

#573 - Group on shelf

including joist hangers and screws

#574 - Group on shelf

including hardware and epoxy hunting item

#575 - Group on shelf

including cabinet hardware

#576 - Group on shelf

including cabinet hardware

#577 - Group on shelf

including cabinet hardware

#578 - Group on shelf

including cabinet hardware

#579 - Group on (2) shelves

including milk crate, wood and hardware tray

#580 - Group on shelf

including cabinet hardware

#581 - Group on shelf

including cabinet hardware

#582 - Group on shelf

including cabinet hardware

#583 - Group on shelf

including cabinet hardware

#584 - Group on shelf

including cabinet hardware

#585 - Group on shelf

including cabinet hardware

#586 - Group on shelf

including cabinet hardware

#587 - Group on (2) shelves

including cabinet hardware, door closer and screws

#588 - Group on shelf

including cabinet hardware

#589 - Group on shelf

including cabinet hardware

#590 - (2) Pressed wood cabinets (day 2 removal only)

48"W x 24"D x 100"H

#591 - (4) Plastic bins with hardware

including screws, nuts and bolts

#592 - (4) Plastic bins with hardware

including screws and bolts

#593 - Plastic bin with hardware

including brass and steel fittings

#594 - Group of cabinet components

including lazy susan and pull out garbage can

#595 - Steel plate

14" x 10.25" x 2.5"

#596 - Senco air stapler

model SKS

#597 - National Detroit orbital air sander

8"

#598 - (4) Cans of 3M Super 77CA spray adhesive

18oz each

#599 - Air actuated lift table with clamp (day 2 removal only)

12.5"L x 36.5"W

#600 - Rolling shop cart

24.5"L

#601 - Rolling shop stool

adjustable height

#602 - Lakewood shop fan

44"W

#603 - Spray booth with wall fan and overhead hood

8'W, buyer responsible for disassembly and removal

#604 - (8) Wood stands and wall racking

stands are 36"W

#605 - Survivair respirator

with (2) canisters

#606 - Master Force rolling knee dolly

20"W

#607 - Group of paint supplies

including brush and paint cups

#608 - (2) Barrels of clear epoxy resin (day 2 removal only)

partially used

#609 - Shop group

including rolling stand and floor fan

#610 - Group on cabinet

including paints and cleaners, all are open

#611 - Contents of cabinet

including paint supplies

#612 - Contents of cabinet

including paint supplies

#613 - Group of paint supplies

assorted, all are open

#614 - (3) paint sprayers on metal stand

assorted

#615 - Group in cabinet

including epoxy sealer and paint remover, all are open

#616 - (2) Wood base cabinets (day 2 removal only)

up to 50"W

#617 - Group on wall

including brushes, hammer, rubber mallet and screwdrivers

#618 - Group on wall

including hangers, paper dispenser and paint sprayer

#619 - Electric paint shaker

for 1-gallon cans

#620 - Group of air hoses

3/8"

#621 - DeVilbiss paint sprayer nozzle

like new

#622 - Group of painting supplies

including cups and paint sprayers

#623 - Garden group

including hanging metal planter holders and metal heart stool 26.5"W

#624 - (4) Pottery planters

up to 12"H

#625 - Group of planters

assorted

#626 - 1-Wheel wheelbarrow

with metal tub, flat tire

#627 - 2-Wheel wheelbarrow

with plastic tub

#628 - Group of copper

assorted

#629 - Group of landscape edging

assorted

#630 - Group of yard tools

including shovels, rake and pick

#631 - Group of yard tools

including shovels, fork and splitting maul

#632 - Steel tamper

8" x 8"

#633 - Aluminum landscape rake

36"W, (1) broken tooth

#634 - Group of plastic tubing

assorted

#635 - Agri-Fab lawn sweep

38"

#636 - Scaffold set

including (4) uprights 61"W x 61"H and (4) cross braces

#637 - (4) Scaffold wheels

8"

#638 - Aluminum scaffold plank

81"L x 19.25"W

#639 - Wood and aluminum scaffold plank

81"L x 19.25"W

#640 - Steel bike rack

for 2" receiver

#641 - Titan tire on 6-bolt rim

ST225/75R15

#642 - Master Craft tire on 6-bolt rim

P225/70R15

#643 - (2) Garage door sets

10ft and 16ft, with rails, 10ft door has a damaged window

#644 - Shop group

including 4ft fencing and orange safety cones

#645 - (3) Post jacks

adjustable height

#646 - Group of plastic garbage cans

assorted

#647 - (3) Plastic garbage cans with lids

up to 33"H

#648 - Werner aluminum extension ladder

40ft

#649 - 1997 Utility Trailer Mfg. box trailer (with title)

2" hitch, tandem axle, some floor damage, 12'L x 83"W x 72"H box (outside measurement), VIN: WC16998

#650 - Jet Sled plastic sled

54"L

#651 - 4-Wheel shop cart

60"L x 23.75"W

#652 - (2) Hand tools

including double bit ax and sledge

#653 - Group of yard tools

including rake, shovels and cultivator

#654 - Group of yard tools

including post hole digger, edger, garden claw and shovel

#655 - Antique auto radiator

26"H

#656 - Antique auto radiator

27"H

#657 - Antique auto radiator

26"H

#658 - Antique auto bumper

64"W

#659 - Group of wiring

6-3 10AWG

#660 - Group of antique fenders and hood

fit Victoria

#661 - Group of garage door hardware

assorted

#662 - Group in trailer

including sand blaster pot, plastic barrel and scaffold braces

#663 - Group in corner

including ducting

#664 - Group of antique auto parts

assorted