Custom Stainless Steel, Inc. Online Only Auction
Bidding opens on November 11th at 6:00am CT
Bidding begins to close on Wednesday, November 18th at 10:00am CT
607 County Road E – Shoreview, MN 55126
NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.
Preview – Tuesday, November 17th from 9:00am to 2:00pm CT
Checkout - Thursday, November 19th from 8:00am to 3:00pm CT
Friday, November 20th from 8:00am to 3:00pm CT
#.1 • READ IN FULL BEFORE BIDDING!
All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification. It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building. Auction Location: Custom Stainless Steel Inc. 607 County Road E Shoreview, MN 55126 Associated Fees: Buyers Premium: 15% Sales Tax: 0% Due to Casual Sale Rule Card Convenience Fee: 4% Load Fees: Mandatory on specified items Payment can be made onsite by Cash, Credit, Wire, Check (Checks from new bidders will NOT be accepted without a bank letter of guarantee). Wire Transfer instructions/Tax Exemption form will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Wire: Add $15 for Transfer Fee. Auction Preview: Tuesday, November 17th from 9:00 am to 2:00 pm Auction Closing: Wednesday, November 18th Beginning at 10:00 am CST (Soft Close) Auction Checkout: (Closing times are sharp) Thursday, November 19th from 8:00 am to 3:00 pm Friday, November 20th from 8:00 am to 3:00 pm Payment and removal is due by 3:00 pm on November 20th. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Items remaining beyond 3:00 pm of November 20th will be considered abandoned regardless of payment status. If you have several items/time consuming items to pick up, DO NOT wait until the end of the day to show up. You will be charged an upfront fee of $150/Hour to keep the building open and staffed. Rigging: Rigging Info Coming Soon! There will be absolutely no scrap disassembly allowed anywhere on this property. This includes cutting with saw/torch, dragging/tossing of items, filling of dumpsters/roll-offs. Shipping: Available for "Hand Carry" Type Items Only. There will be a fee of $20 per lot to haul "BTO/UPS" items back to our warehouse for shipping or pickup from our Blaine, MN warehouse. Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up. UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300. The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in an irrevocable permanent ban from all future auctions. Please reach out to the contact below with any questions or for clarification of terms. Auctioneer: Jim Nelson (612) 991-7008 jim@premiermachineryauctions.com License no. 62-26-06
#1 • Lincoln Norweld LN 130 Welder on Cart with TIG Torch
serial number "22312", mounted on a two-wheeled tubular steel cart with a TIG torch, welding leads, filler rod storage tube with rods, and compressed gas cylinder marked "DOT-3AA 2015" with dual-gauge regulator. Overall: 22" x 20" x 43".
#2 • (1) Section of Galvanized Teardrop Racking
Consisting of (2) 24" x 72" Uprights, (4) 92" Crossmembers, Wire Decking. Contents NOT Included
#3 • (2) Bosch 18V. Cordless Tools.
(1) 2-Speed Drill/Driver, (1) GDX18V-1600, 1/2" Impact , (2) 2-AH Batteries, and Charger.
#4 • Greenlee 767, Lever Operated Hydraulic Knock Out Press.
With Case. No Knockout Punches as Shown.
#5 • Miller Syncrowave 250 CC-AC/DC Welding Power Source with TIG Torch and Regulator
Serial Number: LA129829. Stock Number: 903056. Equipment Type: CC-AC/DC Welding Power Source. Input Voltage: 200/230/460 V. Input Current: 105.8/92/46 A. Input Power: 11.4 kW. Phase: 1. Frequency: 60 Hz. Rated Output NEMA Class I: 200 A, 26 V, 60% Duty Cycle, 80 Max OCV. Rated Output NEMA Class II: 250 A, 30 V, 40% Duty Cycle, 80 Max OCV. Output Modes: DCEP, AC, DCEN. TIG Torch Make: WeldTec. Included Items: WeldTec TIG torch, ground lead with clamp, gas flowmeter regulator with hose, wheeled cart base. Country of Origin: USA. Overall 24" x 27" x 34". Rigging Quote Coming Soon.
#6 • (2) Small Parts Organizers with Contents.
Each Measures 18" x 12" x 3-1/2"
#7 • (7) Pneumatic Tools.
(3) Sioux Cat. 1287 Pneumatic Angle Grinders, (3) Straight Die Grinders, and (1) Paslode Model 3200-S16P, Crown stapler tool.
#8 • (10) USA Made Vise Grip Welding Clamps.
(2) 10" Throat, (3) 16" Throat, (2) Customized 28" Throat, and (3) Standard.
#9 • Shop Made Heavy Duty Welding Stand
On Wheels. 24" x 22-1/2" x 1" Top Plate, 34" Table Height. Rigging Quote Coming Soon.
#10 • Custom Built Hydraulic H-Frame Press.
33" Between Uprights, 36" x 5-1/4" Bed, 18" W Die Holder, Enerpac RC256 Ram, 25-Ton, 10000 PSI Rating. Enerpac Foot Pedal Power Unit, Approx. 48" x 53" x 96" Overall. Rigging Quote Coming Soon.
#11 • (10) Pipe Clamps with Pony Brand Clamps.
Length From 18" Up to 120".
#12 • Vogel Tool & Die Corp. Arc-Fit Manual Tube Shear Hand Press
Operation: Manual lever. Construction: Steel plate. Country of Manufacture: United States. Tooling Numbers: 92524, 9209A. Mount Type: Bracket Mount. Buyer Responsible for Removal of Wall Bracket
#13 • 120V 3" Belt Sander.
16" Flat Grinding Surface on Top. 1/2 HP. Motor. Overall: 23" x 13" x 8". Bolted to Bench Buyer to Remove.
#14 • Dayton Model: 6C697A, Steel Job Box.
Overall: 48-1/2" x 30-1/2" x 57". Contents Included. Rigging Quote Coming Soon.
#15 • Miller Econotig CC-AC/DC Welding Power Source on Cart
Serial Number: KF898151. Stock Number: 903368. Input Voltage: 460 V. Input Current: 33 A. Phase: 1. Frequency: 60 Hz. Processes: GTAW, SMAW. DC SMAW Rated Output: 130 A, 25 V at 20% Duty Cycle, 78 Max OCV. AC SMAW Rated Output: 150 A, 25 V at 20% Duty Cycle, 75 Max OCV. AC/DC GTAW Rated Output: 150 A, 15 V at 20% Duty Cycle, 78 Max OCV. High Frequency Arc Starter. Dimensions of 21" by 36" by 44" overall. Rigging Quote Coming Soon.
#16 • Whitney No. 9-2 Button Punch.
.
#17 • Large Assortment of Solid Brass Stock.
3/4" C-Channel, 1/2" x 1/4" Rectangular, and More. Lengths to 12'
#18 • Thermal Dynamics "Drag-Tool" Plasma Cutter with Built in Air Supply.
Output: 12Amo, 85 V. 30% . 120V. 20 Amp Input, Includes Addition Torch Consumables, and Custom Aluminum Carrying Case Shown in Last Photo. Overall: 16" x 9" x 12".
#19 • Werner 12' Fiberglass Step Ladder.
300 lb Limit, 9'7" Max Standing level
#20 • JET JDP-17MF, Floor-Standing Drill Press
Serial Number: 3120502. Motor Output: 3/4 HP. Voltage: 115/230 V. Phase: 1. Frequency: 60 Hz. Amperage: 9.0/4.5 A. Motor Speed: 1720 RPM. Spindle Speeds (RPM): 200, 290, 350, 430, 500, 580, 640, 720, 800, 870, 1440, 1630, 1820, 2380, 2540, 3630. Drive System: 3-pulley, 2-belt. Table Diameter: approx. 13-1/2". Dimensions: 22" x 32" x 72" overall. Rigging Quote Coming Soon.
#21 • Custom Heavy Duty Metal Frame Rolling Table.
Recessed MDF Board Partial Top. Overall: 120" x 48" x 34". Contents Not Included. Last Checkout Day Removal Only. Rigging Quote Coming Soon.
#22 • Group of Aluminum Diamond Plate Drops.
Largest Overall Piece Measures 48" x 47"
#23 • Metal Framed Table on Wheels.
Wood Top with 24" x 48" Section of Steel Sheet. Overall Approx. 120" x 48" x 33" Overall. Rigging Quote Coming Soon.
#24 • (4) Adjustable Height Material Stands.
18" x 3" C-Channel Tops. 27" Height at Rest Up to 46". (1) Additional Found Shown in Last Photo.
#25 • Miller Syncrowave 250 CC-AC/DC Welding Power Source
Miller Syncrowave 250 CC-AC/DC welding power source, serial number "KK072947", stock number "903056", rated for 200/230/460V single-phase input, with analog volt and amp meters, TIG torch and cable assembly, brass regulator, and wheeled cart base. Overall: 22" x 27" x 36". Rigging Quote Coming Soon.
#26 • Custom Built Stainless Flammables Storage Cabinet
On Wheels. Approx. 69" x 36" x 74" Overall. Contents NOT Included. Rigging Quote Coming Soon.
#27 • Extended Length Pallet Jack.
60" x 7" Forks with 12-1/2" Distance Between Forks.
#28 • Werner 28' Fiberglass Extension Ladder.
Model D6228-2, 300 Lb. Cap.
#29 • Aluminum Single Door Shop Cart.
Overall: 28" x 14" x 38-1/2".
#30 • Peck, Stow & Wilcox Co. Pexto Model 418 E, Motorized Slip Roll Machine
Serial Number: 47. Machine Type: Motorized Slip Roll. Capacity: 16 - 18 Soft Steel. Number of Rolls: 3. Roll Features: Wire-forming grooves, drop-end release mechanism. Motor Manufacturer: Dayton. Motor Model: 6K200D. Motor Horsepower: 3/4 HP. Motor Phase: 1. Motor Voltage: 115 / 208-230 V. Motor Amperage: 11.4 / 5.9-5.7 A. Motor Speed: 1725 RPM. Motor Frame: H56H. Motor Frequency: 60 Hz. Controls: Dayton forward/reverse drum switch, guarded foot switch. Mounting: Dual-leg floor stand. Dimensions: 77"x 34"x 54" overall. Click on 2nd Photo for Video Rigging Quote Coming Soon.
#31 • 44" x 27" x 42" Metal Shop Cart
.
#32 • Acetylene Small Hand Carry Torch.
6-1/2" Dia. Bottle x 18-1/2" Height to Collar, with Goss Torch.
#33 • (2) Independent Interlake Teardrop Style Galvenized Pallet Racking Sections.
Consisting of (4) 88" x 24" Uprights, and (10) 92" x 5" Crossmembers and Wire Decking. Contents Not Included.
#34 • Custom Aluminum Diamond Plate Dock Plate.
1/4" Plate. Overall: 48" x 42-1/2". (2) Welds Cracked on Underside Support Bar as Shown.
#35 • Miller Synchrowave 250, CC AC/DC Welding Power Supply.
Rated Output: 26 Volts, 200 Amps, 60% Duty Cycle, 80 Max OCV. Input: 200/230/460 Volt, 1-Phase, 11.4 KW, s/n: LA253662, Approx. 20" x 28" x 36" Overall. Rigging Quote Coming Soon.
#36 • Custom Built Aluminum Angled Back Material/Panel Cart.
12" Deep Angled Material Platform. Overall: 44" x 26" x 55-1/2"
#37 • Cuprum 5' A-Frame Fiberglass Ladder.
.
#38 • Metal Framed Table on Wheels.
Wood Top with 24" x 48" Section of Steel Sheet. Overall Approx. 120" x 48" x 33" Overall. Rigging Quote Coming Soon.
#39 • (3) Material Stands.
25-1/2" x 2" Top Supports. Height From 30" Up to 48".
#40 • Boschert Eagle Corner Notching Machine
36" Table Width, 8-1/4" and 9" cutting tool Length, Serial Number: 69. Year of Manufacture: 1994. Power Supply: 3 x 220 V / 60 Hz. Connected Load: 7 kVA. Required Fuse: 3 x 25 A. Motor Make: E.M.B. Motor Rating: 5.5 HP. Motor Speed: 1400 / 1700 RPM. Motor Frequency: 50 / 60 Hz. Motor Voltage: 220 V Delta / 380-440 V Wye. Angle Range: 0 to 50 Degrees. Control Type: Tethered Foot Switch. Mounting: Mobile Caster Base. Approx. 40" x 50" x 44" Overall. Click on 2nd Photo for Video Rigging Quote Coming Soon.
#41 • Metal Multi-Drawer Cabinet
With Contents as Shown. Cabinet Measures 21-1/2" x 28" x 51". Rigging Quote Coming Soon.
#42 • Signode Model DF-15, Steel Banding Cart.
With Small Amount of 5/8" Banding Clips, and Tools. Overall: 25" x 16" x 38".
#43 • 8' Fiberglass A-Frame Ladder.
.
#44 • Custom Built Rack.
Constructed with 2" Angle Iron. Overall: 36" x 36" x 34". Final Checkout Day Removal Only. CONTENTS NOT INCLUDED. Rigging Quote Coming Soon.
#45 • Miller Syncrowave 250 CC-AC/DC Welding Power Source
Stock Number: 903056. Serial Number: KK073012. Input Voltage: 200/230/460 V. Input Current: 105.8/92/46 A. Input Phase: 1 Phase. Input Frequency: 60 Hz. Input Power: 11.4 kW. Rated Output Class I: 200 A at 28 V with 60% duty cycle. Rated Output Class II: 250 A at 30 V with 40% duty cycle. Maximum Open Circuit Voltage: 80 V. Mounting: Wheeled cart. Dimensions: 20x28x34. Rigging Quote Coming Soon.
#46 • 6" Swivel Base Bench Vise.
Bolted to Stand Buyer to Bring Tools for Removal. Overall: 8" x 17" x 7-1/2".
#47 • Approx. 50' 208V. Single Ph. Extension Cord.
(2) Different Cord Ends as Shown.
#48 • Shop Made Metal Framed Table on Wheels.
Approx. 44" x 66" x 33" Overall
#49 • 2-Door Wood Cabinet
With Contents. Approx. 36" x 21" x 47".
#50 • Wysong MTH175-144, 175-Ton Hydraulic Press Brake
Serial Number: MT2-119. Rated Capacity: 175 Ton. Stroke: 8 in. Maximum Die Space: 17 in. Distance Between Housings: 126 in. Motor Manufacturer: U.S. Electrical Motors. Motor Output: 15 HP. Motor Speed: 1765 RPM. Motor Frame: 254TC. Motor Electrical: 230/460 V, 3 Phase, 60 Hz, 39.2/19.6 F.L. Amps. Maximum System Pressure: 3200 PSI. Controls: Eaton Electrical Cabinet with Selector Switches and Foot Pedal Switch. Approx. 153" x 60" x 108" Overall. Note: Brake Dies on Machine are NOT Included. Click on 2nd Photo for Video. Rigging Quote Coming Soon.
#51 • (6) 120V. Extension Cords.
.
#52 • Greenlee No. 767 Hydraulic Hand Pump.
Includes (1) Hydraulic Cylinder Attached to Line as Shown. And Fitted Case.
#53 • Johnson Gas No. 101, Propane Bench Soldering Furnace.
4-1/2" x 2-1/2" Window. Includes Cart and Misc. Tooling.
#54 • Assorted Masonry Drills, Standard Drills, and Hardware/Fasteners.
.
#55 • Miller Millermatic Vintage Wire Welder and Power Source
Stock Number: 903355. Serial Number: KJ036044. Type: CV-DC Welding Power Source and Wire Feeder. Input Voltage: 200/230 V. Input Amperes: 46/40 A. Input Power: 8.3 kW. Frequency: 60 Hz. Phase: 1. Rated Output Amps: 200 A. Rated Output Volts: 28 V. Duty Cycle: 60%. Max OCV: 42 V. NEMA Class: 1 (60). Included Components: MIG welding torch assembly, ground clamp and cable, internal wire drive mechanism. Note Gas Bottle is NOT Included. Rigging Quote Coming Soon.
#56 • Assorted Hole Saws.
Sizes Up to 4-1/4".
#57 • (5) Pneumatic Tools.
(2) Sioux Cat. 1287 Pneumatic Angle Grinders, (3) Straight Die Grinders.
#58 • (14) Pieces of Assorted Stainless Steel Stock.
Also Includes (2) 4" Dia x 104-3/4" Round Pipe and 6" Dia. X 119-1/2" Round Pipe on Floor Shown in Last Photos. Main Stock on Cart: Including Round Tube Stock,Square, and Rectangular. Length Up to 20'.
#59 • (2) Sections of Galvanized Teardrop Style Pallet Racking.
Consisting of (3) 84" x 24" Uprights, and (10) 92" Crossmembers and Wire Decking. Contents Not Included.
#60 • Everett Model 10-MIT, 10" Chop Saw.
3HP, saw Duty Motor. Saw Alone Measures: 13" x 26" x 24". Custom Stand Measures: 19" x 32" x 32". And Includes (2) Matched Height Material Stands. And 36" Material Stop. 208/230/460V. 3-Ph. Rigging Quote Coming Soon.
#61 • Stainless Steel NSF Table.
Overall: 48" x 24" x 34" Lower Base Wider than Table top as Shown. Contents Not Included.
#62 • Large Assortment of Casters.
.
#63 • (2) 18-Drawer Small Parts Cabinets with Contents.
Each Measures:18-1/4" x 6-1/2" x 8-1/2".
#64 • 3-Piece Hand Rotary Pump.
.
#65 • Miller Syncrowave 250 CC-AC/DC Welding Power Source
Serial Number: KG101225. Stock Number: 903056. Input Voltage: 200/230/460 V. Input Current: 105.8/92/46 A. Input Power: 11.4 kW. Phase: 1. Frequency: 60 Hz. NEMA Class I Output: 200 A at 28 V, 60% Duty Cycle, 80 Max OCV. NEMA Class II Output: 250 A at 30 V, 40% Duty Cycle, 80 Max OCV. Controls: Preflow Time, AC Balance, Arc Force (Dig), Postflow Time, Amp Adjust, Output Selector, Spot Time, Crater Time, Amperage Control, High Frequency Start. Connections: Remote 14 Receptacle, 120 VAC Auxiliary Duplex Receptacle, Work and Electrode Studs, Gas Solenoid Fitting. Mounting and Transport: Running Gear with Front Casters, Rear Wheels, Push Handle, Rear Cylinder Rack, Top Lifting Eye. Included Equipment: Ground Clamp and Lead. Dimensions of 24"x 36"x 48". Rigging Quote Coming Soon.
#66 • (2) Porter Cable Model 7401, Variable Speed 7" Polishers with Flap Wheel Adaptors.
.
#67 • (2) 120V. Power Tools.
(1) Bosch Bulldog Model 11224VSR Variable Speed Hammer Drill. With SDS Plus Receiver, and (1) Milwaukee Straight Grinder.
#68 • 44" x 27" x 42" Metal Shop Cart.
.
#69 • (10) Vise Grip Welding Clamps.
All USA Made. (2) Extended Reach 10" Throat.
#70 • Miller Maxstar 150 STL Welder on Mobile Cart with Gas Cylinder
Equipment Type: DC TIG and Stick welder. Input Voltage: 115/230 VAC. Output Amperage: 15 to 150 A. Flowmeter Regulator Make: Medalist. Gas Cylinder Specification: DOT-3AA 2015. Cart Type: Two-wheel mobile cart with pneumatic tires and integrated cylinder rack. Included Accessories: TIG torch assembly, ground clamp, welding leads, gas cylinder, regulator with flowmeter, filler rod tube, fire extinguisher.
#71 • Metal Frame Rolling Workstation.
48" x 49-1/2" x 36". Rigging Quote Coming Soon.
#72 • Assorted Hand Tools.
Includes Tool Box.
#73 • JB Refrigerant Manifold Gauge Set and Copper Tubing Tools
.
#74 • Assorted Welding Components.
Including (2) Spools of Mig Wire, (3) Welding Hoods, and Consumables.
#75 • Miller Syncrowave 250 AC/DC Arc Welding Power Source with Cart
Serial Number: KF897200. Stock Number: 903056. Input Voltage: 200/230/460 V. Input Current: 105.8/92/46 A. Input Power: 11.4 kW. Phase: 1. Frequency: 60 Hz. NEMA Class I Rated Output: 200 A at 28 V, 60% Duty Cycle. NEMA Class II Rated Output: 250 A at 30 V, 40% Duty Cycle. Max OCV: 80 V. Mounting: Mobile cart with rear wheels and front swivel casters. Included Connections: Welding cables and ground clamp. Dimensions: 26"x42"x36" overall. Rigging Quote Coming Soon.
#76 • Welding Steel Mobile Work Table
48" x 29" x 1" Top Plate, Frame Material: Welded steel. Leg Construction: Square steel tube. Top Work Surface: Solid steel plate with two pre-drilled holes. Shelf Configuration: 1 open lower steel shelf. Mobility: 4 swivel caster wheels. 34-1/4" Table Height
#77 • 148" L Lower Brake Die.
1/2" Mount
#78 • (7) Pneumatic Tools.
(2) Sioux Cat. 1287 Pneumatic Angle Grinders, (4) Straight Die Grinders. (1) Missing Collet Closer Head and Air Connection, and (1) Right Angle Die Grinder.
#79 • 149-3/4" Gooseneck Brake Die
1/2" Mount. Rigging Quote Coming Soon.
#80 • Greenlee 746 Hydraulic Knockout Punch Set with Enerpac P39 Hand Pump and Mobile Cart
Maximum Operating Pressure: 10,000 PSI (700 bar). Ram Manufacturer: Greenlee Tool Co. Ram Model: 746. Ram Part Number: 5017096. Included Tooling: Knockout Punches, Dies, Threaded Draw Studs, Spacers. Cart Type: Four-Wheel Mobile Rolling Cart with Organizer Panel and Lower Tray. Dimensions: 27 " x 20" x 45" overall. Rigging Quote Coming Soon.
#81 • 73" x 18" Wall Mounted Stainless Steel Shelf.
.
#82 • 89" x 12" Deep Wall Mounted Stainless Shelving Unit.
.
#83 • Miller Spoolmatic 30A, Spool Tool.
.
#84 • (2) Milwaukee 120V. Power Tools.
(1) Variable Speed 4-1/2" Angle Grinder, (1) 45" Hand Drill.
#85 • Thermal Dynamics PakMaster 50 XL Plus Plasma Cutting System
with attached PCH/M-62 torch lead with Addition Consumables. ground clamp, rear-mounted dual-stage air filter and regulator assembly, Single or 3-Ph. Input as Shown on Data Plate with Details. Currently Set for 3-Ph. Overall: 13" x 25" x 19".
#86 • Metal Framed Table on Wheels.
Wood Top with 24" x 48" Section of Steel Sheet and 2" Wide Steel Strip on outside of Entire Table. Overall Approx. 120" x 48" x 33". Rigging Quote Coming Soon.
#87 • 143-3/4" Upper Brake Die.
1/2" Mount. Rigging Quote Coming Soon.
#88 • 48" x 20-1/2" Aluminum Dock Plate.
Constructed with 1/4" Aluminum Diamond Plate.
#89 • 149-7/8" Lower Brake Die.
1/2" Mount. Rigging Quote Coming Soon.
#90 • Pro-Weld CD-312 Stud Welder with Tool, Cables, and Rolling Cart
Serial Number: 322-1687-1003. Input Voltage: 110V AC. Amperage: 20A. Frequency: 60 Hz. Output Terminals: Ground, Cuphead, Control, Tool. Controls: Rotary Voltage Control Knob, Rocker Power Switch. Displays: Digital Weld Voltage Display. Indicator Lights: Ready, Contact, Trigger. Included Components: Stud Welding Tool, Ground Clamp, Welding Cables, Rolling Tray Cart with Casters, Stud Fasteners. Country of Manufacture: United States. Dimensions: 21"x23"x 33".
#91 • Large Assortment of Brake Die Segments and Shop Made Brake Dies.
1/2" Mount
#92 • Large Quantity of Assorted Stock Material.
Including Steel, Stainless, Aluminum, and More. DOES NOT INCLUDE (2) PAPER WRAPPED STAINLESS sections on Floor.
#93 • Wall Mounted Stainless Steel Shelving Unit.
71-1/2" x 10-3/4" Deep.
#94 • Assorted Upper and Lower Brake Die Segments
1/2" Mount. Lengths from 1" to 51"
#95 • Large Quantity of Commercial Kitchen Hardware Components.
Including Drawer Slides, Pot Hangers, Sink Drains, Equipment Feet, On Counter Electrical Enclosures, and More. Folding shelf Brackets and Sneeze Guard Components.
#96 • 36" Lower Brake Die.
1/2" Straight Tang.
#97 • (2) 120V. Power Tools.
Including Ridgid 7.5 Amp, 1/2" Drill. And Dewalt Reciprocating Saw.
#98 • 16' 10" Length of Aluminum C-Channel.
4" x 2", 3/16" Wall Thickness.
#99 • Palm Button Operator Stand.
Approx. 31" x 18" x 44" Overall.
#100 • Western Arctronics 30 KVA Resistance Spot Welder
Model: 30 KVA. Serial Number: FH 216. 24" Throat, 2" Arm Diameter, Power Rating: 30 KVA. Duty Cycle: 50%. Input Phase: 1. Frequency: 60 Hz. Primary Voltage: 460 V. Primary Amperage: 50 A. Secondary Voltage Minimum: 2.0 V. Secondary Voltage Maximum: 4.0 V. Maximum Shorted Secondary Amps: 19000 A. Water Pressure: 20 lbs. Maximum Water Temperature: 60 °F. Timer Model: ET. 76. Heat Selector: 5 Positions. Actuation: Foot Switch. Dimensions: 51" x 19" x 50". Rigging Quote Coming Soon.
#101 • Custom Heavy Duty Metal Frame Rolling Table.
Recessed MDF Board Partial Top. Overall: 120" x 48" x 34". Contents Not Included. Last Checkout Day Removal Only. Rigging Quote Coming Soon.
#102 • (10) Assorted Clamps.
Mostly Vise Grip USA Brand. (2) Customized with For Roundstock Holding (3) 16" Deep Throat, (2) 10" Deepthroat, and (1) Wilton Rapid Titan C-Clamp 6" Cap.
#103 • Metal Framed Table on Wheels.
Wood Top with 24" x 48" Section of Steel Sheet. Overall Approx. 120" x 48" x 33" Overall. Contents Not Included. Rigging Quote Coming Soon.
#104 • Large Quantity of General Purpose Silicone, and Construction Adhesive.
.
#105 • Patton 38" Drum Fan.
115 Volt.
#106 • Shop Made Material Storage Rack on Wheels.
Approx. 51" x 48" x 58" Overall. 49" x 5-3/4" Slats. Contents NOT Included
#107 • 120V. Confined Space Blower.
8" Inlet and Outlet Ducting. Overall: 18" x 20" x 20".
#108 • 62" x 32" x 42" Metal Frame Shop Cart.
Fiberboard Top.
#109 • 144-1/2" L Lower Brake Die.
1/2" Mount. Rigging Quote Coming Soon.
#110 • Kaiser SK26 Screw Type Air Compressor.
Recorded Hours: 47834.34 h. 230 Volt, 3-Phase, Approx. 31" x 30" x 40" Overall. Additional Included Items: Roll of filter media. Rigging Quote Coming Soon.
#111 • Custom Built Aluminum, Angled Back Material/Panel Cart.
12" Deep Angled Material Platform. Overall: 44" x 26" x 55-1/2"
#112 • Metal Framed Table on Wheels.
Wood Top with 24" x 48" Section of Steel Sheet. Overall Approx. 120" x 48" x 33" Overall. Rigging Quote Coming Soon.
#113 • Assorted Mostly 120V. Power Tools.
Also Includes Bosch 18V. 2-Speed Drill/Driver with (2) Batteries and Charger. (1) Porter Cable Variable Speed Polisher with Flap Wheel Adaptor. And (3) Dewalt Drivers.
#114 • Stainless Steel Wall Mounted Table.
Overall: 75-1/2" x 28" Contents Not Included.
#115 • JET JDP-14M, 14" Drill Press with 1/2 HP Motor
14" swing drill press, stock number "354069", serial number "000044", with 5/8" capacity, 7" Throat, a 1/2 HP single-phase 115/230V motor prewired for 115V, 16 spindle speeds from 200 to 3630 RPM, Röhm "1/8-5/8" keyed chuck, two chuck keys, slotted circular table with rack-and-pinion elevation, depth stop rod, and foot pedal switch. Overall:15" x 26" x 39". Bolted to Bench Buyer to Bring Tools for Removal.
#116 • Milwaukee Model 30023, Platform Cart with Stepped Back Support.
Overall: 17" x 21" x 53".
#117 • (8) Post Type Mounting Casters.
1-1/2" Dia. Post.
#118 • Vermette Machine Company 512A Manually Operated Material Lift
Equipment Type: Manually operated material lift. Center Load Capacity: 500 lb (227 kg). Operation: Manual cable winch with main crank and helper handle. Mast Type: Telescoping vertical mast. Base Type: Forward legs with front rollers, rear swivel casters, and rear transport wheels. Dimensions: 29" x 60" x 80" overall.
#119 • (2) Tripod Light Stands.
120 Volt
#120 • Roper Whitney, Co. Model 381D, Manual Slip Roll.
22 Gauge Capacity in Soft Steel, 37" x 2" Rollers, Ring Rolling Grooves, Metal Stand, Approx. 54" x 15" x 48" Overall. Rigging Quote Coming Soon.
#121 • (5) Sections of 25" x 93-1/2" Wire Grid Decking Panels.
.
#122 • (4) Shop Made Brake Dies.
1/2" Mount. Lengths up to 146-1/2". Rigging Quote Coming Soon.
#123 • (2) Stainless Steel Wall Mounted Racks.
(1) 60" x 12" Deep, (1) 62" x 20" Deep. Contents Not Included.
#124 • Custom Built Brake Die Cart.
Approx. 121" x 32" x 44" Overall. Contents NOT Included. Removal Must be Done Toward End of Scheduled Removal Period Rigging Quote Coming Soon.
#125 • Delta Model 23-680, 6" Double End Grinder.
6" Wheel Cap. 1/4 HP, 3500 RPM, 120V. Overall: 16" x 8" x 11". Bolted to Bench Buyer Bring Tools for Removal.
#126 • 145" L Upper Brake Die
1/2" Mount. Rigging Quote Coming Soon.
#127 • (6) USA Made Vise Grip Welding Clamps.
(3) 11R, (1) 2-Jaw Welding Clamp, and (2) 10" Throat.
#128 • 143-7/8" Lower Brake Die.
1/2" Mount. Rigging Quote Coming Soon.
#129 • 53-7/8" Lower Brake Die.
1/2" Die Mount.
#130 • Falls Products Inc. D-BUR-R Model 121, Edge Deburring Machine
Serial Number: 2460. Motor Manufacturer: Marathon Electric. Horsepower: 1/3 HP. Speed: 1725 RPM. Voltage: 115/230 V. Phase: 1 PH. Frequency: 60 Hz. Amperage: 4.5/2.25 FLA. Frame: 48Y. Duty: Continuous. Mounting: Four swivel casters. Dimensions: 50" x 28" x 58" overall. Rigging Quote Coming Soon.
#131 • 12' 3/4" Lower Brake Die.
1/2" Mount. Rigging Quote Coming Soon.
#132 • 3-Sided Shop Cart.
31" x 18" x 28" Side Height and 40-1/2" Height to Removable Handle.
#133 • 61" Height Johnson Bar. 6" Wide Toe.
.
#134 • 32" x 12" Deep Stainless Steel Wall Mount Rack.
.
#135 • AGM Industries Model 250CX525, Stud Welder.
115 Volt, 15 Amps, 1-Phase, s/n: 1368, Cart Mounted. Note: Tires are Flat.
#136 • Great Lakes Air, Model GRF-100, Air Dryer.
1/2 HP, R-22 Refrigerant Type, 230 Volt, 1-Phase, Approx. 26" x 34" x 34". Rigging Quote Coming Soon.
#137 • 44" x 27" x 42" Metal Shop Cart.
.
#138 • Ryobi 14.4V. Drill Driver with Flashlight.
(1) Battery, Charger, and Case.
#139 • Angle Grinder Flap Head Thread on Wheel.
With Large Quantity of Consumable Brushes, and Sand Paper Inserts.
#140 • Kruge Air/Curtis 10 HP Air Compressor.
Approx. 120 Gallon Receiver Tank, 208-230/460 Volt, 3-Phase, Approx. 70" x 33" x 54" Overall. Rigging Quote Coming Soon.
#141 • Milwaukee Heavy Duty 7" Grinder.
With Buffing Pad Head and 6" x 4-3/4" x 2" Grinding Head.
#142 • Assorted Buffing Components and Compounds.
.
#143 • (2) Porter Cable Model 7401, Variable Speed 7" Polishers
with Flap Wheel Adaptors. 120V.
#144 • 12' Upper Brake Die
1/2" Mount. Rigging Quote Coming Soon.
#145 • Miller Syncrowave 250 CC-AC/DC Welding Power Source on Wheeled Cart
Serial Number: KK072948. Stock Number: 903056. Input Voltage: 200/230/460 V. Input Amperes: 105.8/92/46 A. Input Phase: 1. Frequency: 60 Hz. Input Power: 11.4 kW. Rated Output Class I: 200 A at 28 V, 60% duty cycle. Rated Output Class II: 250 A at 30 V, 40% duty cycle. Max OCV: 80 V. Current Type: AC/DC. Controls: Preflow, AC balance, amperage adjustment, arc control, postflow time, crater time, spot time, high frequency. Torch Make: Weldtec. Included Components: Wheeled mobile cart base, TIG torch with cable assembly, work lead with ground clamp, dual filler rod storage canisters. Dimensions: 30" x 30" x 35". Rigging Quote Coming Soon.
#146 • 144-1/2" Lower Brake Die
1/2" Mount. Rigging Quote Coming Soon.
#147 • (18) Lengths of Copper Tubing.
Lengths From approx. 12' Up to 18'. Dia. From 5/8" Up to 1". Also Includes (6) Additional Sticks From 64" Up to 80". Shown in Last Picture.
#148 • Assorted Brazing and Tig Wire.
.
#149 • 48" x 48" Oxy-acetylene/Plasma Cutting Shop Table
34" Height to Table Top, 7-1/2" Distance Between Material Supports. Includes Ducting Hose. Blower Availiable to Buyer But Bring Tools and Ladder for Removal. MOTOR hardwired as Shown. PMA WILL NOT ASSIST AND CAPPING CORD ENDS IS A MUST!
#150 • Wysong H-2510 Hydraulic Squaring Shear
Serial Number: H2-162. Rated Capacity: 1/4 in. mild steel. Maximum Cutting Length: 120 in. cutting tool Length: 122 in. Digital Controller: Wysong PC 100 Powered Back Gauge. Fluid Specification: AW Fluid 46. Motor Brake Torque: 7.25 lb-ft. Brake Coil Supply: 100 V DC. 230 Volt, 3-Phase Input, Dimensions: 147" x 117" x 70". Click on 2nd Photo for Video Rigging Quote Coming Soon!
#151 • Pallet of 11-3/4" x 8-3/4" x 3-5/8" Landscaping Blocks
#152 • (4) Matching Chairs
#153 • Small NSF Stand.
Approx. 24" x 13" x 35"
#154 • Copper Sheet Stock, Plates, and Offcuts
Forms Included: Flat sheets, plates, cutoffs. Largest Sheet Measures 48" x 44"
#155 • Lincoln Model SP-125+, Wire Feed Welder.
Welding Amp Range. 25-125 Amp. 28V. Max OCV. Duty Cycle From 20% Up to 30%. 115V. Single Ph. 25 Amp. Welder Measures: 10" x 17" x 15".
#156 • (3) Matching Office Chairs
#157 • (3) Matching Office Chairs
#158 • Laminate Top Conference Table.
96" x 47" x 29" Overall.
#159 • Group of File Hangers.
#160 • Assorted Office Furnishings
Including: Wood Desk, Wood Table, Office Chair. Tech Items are NOT Included
#161 • Hercules Fire Resistant File Cabinet.
Approx. 20-1/2" x 30-1/2" x 55" Overall. Contents NOT Included. Seller has Key
#162 • Drafting Table.
48" x 37" x 36" Overall
#163 • Hamilton 5-Drawer Flat File
On Riser Stand. 43" x 34" x 46" Overall
#164 • Diazit Dart 115 Model 6110 Diazo Machine
Serial Number: 110938. Voltage: 120 V. Frequency: 60 Hz. Amperage: 8 A. Power Source: Attached three-prong power cord. Controls: Rotary dial (0 to 21), Run/Stop rocker switch, Forward/Reverse toggle switch. Dimensions: 57"x21"x10".
#165 • CalComp PACESETTER Model 503P Floor-Standing Plotter
Serial Number: 655215053. Voltage: 100-120 / 220-240 V~. Frequency: 50/60 Hz. Phase: 1. Current: 1.5 / 1.0 A. Fuse Rating: 100, 120 V~ 1-1/2A SB 250V / 220, 240 V~ T 0.8A 250V. Configuration: Wide-format roll plotter mounted on integrated central pedestal floor stand with H-shaped base. Dimensions: 54" X 22" X 50"
#166 • Wood Office Desk
Approx. 65" x 30" x 29"
#167 • Wood Desk and 2-Drawer Cabinet
#168 • Laminate Top Table.
Approx. 96" x 26" x 30-1/2". Contents NOT Included
#169 • 49" x 77" x 1/2" 6061 Aluminum Plate.
.
#170 • Assorted Sheet Stock Material Including Perforated, Copper and Zinc.
(1) Zinc. 39" x 120" at Approx. 1/16". (3) Perforated Assortment Largest. 48" x 42-1/2". (2) Copper Approx. 22 Ga. At 21" x 10'. (1) 1/8" Copper at 21-1/2" x 40" and More Copper Shown in Last Photos.
#171 • Assorted 304 Stainless Sheet Stock.
(1) Full Sheet 4' x 10' 16Ga. No. 4 Finish, (2) Sheets of 4' x 10' 18Ga. No. 4 Finish, and Small Partials Shown, and (1) 5' x 95-1/2' 16 Ga. Mirrored Finish . And (1) 34" x 110" 12Ga. No. 4 Finish. (1)4' x 10' 4" Quilted with No. 4 Finish
#172 • Assorted Stainless Material.
(6) Pieces of Solid Round Stock Up to 1" x 72" Length, also Includes Custom 9" Wide Drainage Grate Covers. Lengths: 99" and 120".
#173 • JB Industries DV-85N, Vacuum Pump.
1/2 HP, 120 Volt
#174 • Watson Gasket Corner Cutter with Spool of Gasket Material.
.
#175 • Custom Stainless Basin.
14" x 44" x 9-1/2" ID, 48" x 18" x 12" Overall
#176 • 20-3/4" Diameter Stainless Basin
#177 • Custom Built Sheet Storage Rack.
60" x 5" Slats, Approx. 14' x 9' x 62" Overall. Contents NOT Included. Rigging Quote Coming Soon.
#178 • (17) Metro NSF 33-1/2" Length Shelfing Uprights and Clips.
Shelving Clips Shown in Last Photo.
#179 • 2-3/4 Gallons of Kason Food Service Sound Deadening Paint
#180 • Group of Assorted Basins, Faucets, Misc. Production Items.
#181 • Assorted Stainless Handle Hardware
#182 • Large Assortment of Stainless Legs/Feet
#183 • Assorted Stainless Hood Filter Enclosures
#184 • Assorted Stainless Feet
#185 • Stainless Steel Sink Basin.
25-3/4" x 21" x 9-1/2" ID. 30" x 25-1/2" x 10-3/4" Overall
All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification.
It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building.
Auction Location:
Custom Stainless Steel Inc.
607 County Road E
Shoreview, MN 55126
Associated Fees:
Buyers Premium: 15%
Sales Tax: 0% Due to Casual Sale Rule
Card Convenience Fee: 4%
Load Fees: Mandatory on specified items
Payment can be made onsite by Cash, Credit, Wire, Check (Checks from new bidders will NOT be accepted without a bank letter of guarantee). Wire Transfer instructions/Tax Exemption form will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Wire: Add $15 for Transfer Fee.
Auction Preview:
Tuesday, November 17th from 9:00 am to 2:00 pm
Auction Closing:
Wednesday, November 18th Beginning at 10:00 am CST (Soft Close)
Auction Checkout: (Closing times are sharp)
Thursday, November 19th from 8:00 am to 3:00 pm
Friday, November 20th from 8:00 am to 3:00 pm
Payment and removal is due by 3:00 pm on November 20th. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Items remaining beyond 3:00 pm of November 20th will be considered abandoned regardless of payment status. If you have several items/time consuming items to pick up, DO NOT wait until the end of the day to show up. You will be charged an upfront fee of $150/Hour to keep the building open and staffed.
Rigging:
Rigging Info Coming Soon!
There will be absolutely no scrap disassembly allowed anywhere on this property. This includes cutting with saw/torch, dragging/tossing of items, filling of dumpsters/roll-offs.
Shipping:
Available for "Hand Carry" Type Items Only. There will be a fee of $20 per lot to haul "BTO/UPS" items back to our warehouse for shipping or pickup from our Blaine, MN warehouse.
Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up.
UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300.
The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in an irrevocable permanent ban from all future auctions. Please reach out to the contact below with any questions or for clarification of terms.
Auctioneer: Jim Nelson
(612) 991-7008
jim@premiermachineryauctions.com
License no. 62-26-06
