Machine Tool Marketplace Online Only Auction
Bidding begins Thursday, November 5, 2026 @ 6:00 AM CT
Bidding closes Thursday, November 19, 2026 @ 10:00 AM CT (5 lots per minute with 1-minute extended bidding)
Location: 8370 W. 35W Service Drive NE Blaine, MN 55449
NOTICE: Certain lots may have been revised or removed to comply with policies. See auction site for full listings.
All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification.
It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building.
Unless noted otherwise in item descriptions.
Items at "offsite" locations must be removed within the scheduled removal period. Rigging information will be posted on larger items. Buyers must hire a licensed and insured rigger for these items (Normally the posted rigger per the sellers request). All payments must be made at our office. Payments will not be accepted at "offsite" locations. UPS shipping and LTL are not available for offsite items.
Associated Fees:
Buyers Premium: 15%
Sales Tax::8.375%
Card Convenience Fee: 4%
Payment can be made onsite by Cash, Credit, Check (Checks over $2000 will not be accepted without a Bank Letter of Guarantee), Wire (Buyer Must Add $15 for Transfer Fee),
Wire Transfer instructions will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day).
Auction Preview:
Wednesday, November 18th from 8:00 am to 3:00 pm or daily by appointment only.
Auction Closing:
Thursday, November 19th Beginning at 10:00 am
This auction will close at a rate of (5) lots per minute with 1 minute extended bidding.
Auction Checkout: (Closing times are sharp)
Monday, November 23rd from 8:00 am to 3:30 pm
Tuesday, November 24th from 8:00 am to 3:30 pm
Wednesday, November 25th from 8:00 am to 3:30 pm
Payment and removal is due by 3:30 pm of Wednesday, November 25th. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee.
Rigging:
Larger items requiring a forklift to load will display a loading fee. This fee will not be added to your invoice. Please add any loading fees to your total if you require this service. We ask that buyers bring appropriate trailers/transportation for their purchases. Excessive strapping, blocking, disassembly will result in increased loading fees.
Buyers are free to load their purchases at our facility using non-powered equipment but must bring their own help as auction staff will not assist. Buyers will be responsible for any damages/injuries caused while loading their own purchases. Ground level removal only. Plan accordingly.
Shipping:
Available for "Hand Carry" Type Items Only.
Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up.
UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300.
The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in item abandonment regardless of payment status, and an irrevocable permanent ban from all future auctions.
Auctioneer: Jim Nelson
(612) 991-7008
jim@premiermachineryauctions.com
License no. MN 62-26-06
ONLINE Terms and Conditions – Premier Machinery Auctions, LLC.
Last Updated: 4/15/2019
PLEASE READ THIS ONLINE TERMS AND CONDITIONS AGREEMENT (“AGREEMENT”) CAREFULLY, AS IT CONTAINS THE TERMS AND CONDITIONS THAT WILL GOVERN YOUR RIGHTS AND RESPONSIBILITIES. This Agreement constitutes a legally binding agreement between you (as defined below) and Premier Machinery Auctions, LLC, a Minnesota limited liability company. Premier Machinery Auctions and its services may only be used by persons who can enter legally binding contracts under applicable law for the purchase of goods. Consequently, persons under the age of 18 may not use Premier Machinery Auctions or its services, and may not register.
Your clicking on the button marked “I have read and AGREE to the Online Terms and Conditions” or your ongoing use of the Premier Machinery Auctions website and Premier Machinery Auctions services indicates your acknowledgement that you have read, understand, agree to, and accept this Agreement. It is your responsibility to carefully read this Agreement before using any of the Premier Machinery Auctions services, including this website. If you not wish to be bound by this Agreement, do not register or continue to use the services or this website.
1. DEFINITIONS. The following terms are defined for use in this Agreement.
(a) “Auction Item,” “Item,” or “Lot” means the piece or pieces of equipment that are included in the auction.
(b) “Bidder” means an individual or entity that creates an account with Premier Machinery Auctions or obtains a bidder number, regardless of such user’s purpose for creating the account and whether or not such account is ever utilized to place a bid.
(c) “Buyer’s Premium” means that additional cost or fee charged on the winning bid that a Purchaser must pay.
(d) “Premier Machinery Auctions” means Premier Machinery Auctions, LLC.
(e) “Purchaser” means a Bidder that has made an offer to purchase an item that has been accepted by Premier Machinery Auctions.
(f) “Seller” and “Owner” refer to the person or entity that has enlisted the services of Premier Machinery Auctions to facilitate the sale of their item.
(g) “You” and “User” refer to the individual and/or entity agreeing to these terms and conditions to permit use of Premier Machinery Auctions services.
2. IDENTIFICATION. You are required to provide Premier Machinery Auctions with a full name, address, and all other required information prior to placing a bid. Premier Machinery Auctions, at its sole discretion and for any reason or no reason, may revoke or deny registration to any User.
3. DEPOSIT. A cash deposit may be required to register, or may be required to continue bidding after a monetary threshold has been reached. The determination as to the amount and timing of such a cash deposit is at the sole discretion of Premier Machinery Auctions. Failure to make a required deposit may result in suspension of bidding privileges, the disqualification of your bid, revocation of your registration, or any combination together.
4. BID OPERATION. By hosting an auction, Premier Machinery Auctions is soliciting offers from Bidders for the sale of certain items. By submitting a bid, you are making an irrevocable legal offer to buy the Auction Item and are agreeing to complete the transaction as described in this Agreement and with all other terms disclosed at the time of the auction. Once accepted by Premier Machinery Auctions, a contract is created for the sale and purchase of the item in accordance with this Agreement and all other terms disclosed at the time of the auction. All auctions are subject to the Seller’s right of confirmation, Seller’s bids, and Premier Machinery Auctions bids on behalf of the Seller. Unless expressly agreed to in writing by Premier Machinery Auctions Premier Machinery does not run “absolute auctions.” Premier Machinery Auctions reserves the right to reject any bid that is only a minimal increase over the previous bid.
5. PAYMENT. All amounts owed must be paid in full within the time announced by Premier Machinery Auctions. No item may be removed unless all amounts owed are paid in full. All payments shall be made in United States Dollars. Premier Machinery Auctions accepts the following methods of payment: cash, cashier’s check, credit card, money order, or wire transfer. Personal and business checks may be accepted; however, Premier Machinery Auctions reserves the right to require a letter of guarantee from a bank or other person or entity acceptable to Premier Machinery Auctions in its sole discretion. A $35.00 handling charge may be added to the purchase price of all titled vehicles.
6. CREDIT CARD TRANSACTIONS. All credit card purchases must be pre-approved by Premier Machinery Auctions and are subject to a 4% handling charge. Premier Machinery Auctions reserves the right to charge your credit card for the full amount of your winning lot plus any applicable sales tax and Buyer’s Premium if you have not made payment to Premier Machinery Auctions on or before the final day of the auction checkout.
7. COMPLIANCE WITH TERMS OF PURCHASE. By bidding on an Auction Item, each Bidder represents and warrants that they have the ability to close the transaction pursuant to the terms and conditions of sale, including the payment of all money owed. You acknowledge and agree that you have certain obligations if your offer to purchase an item is accepted. Further, you acknowledge and agree that by failing to comply with those obligations, Premier Machinery Auctions, the Seller, and the Owner will incur certain expenses as a result, including but not limited to costs and fees in storing, transporting, or reselling the Auction Item. You will be responsible for any and all expenses.
If the Purchaser fails to remove the item by the announced check-out period, all the rights of interests in the item will revert to the original Seller or Owner. Notwithstanding the elimination of any rights and interests, Purchaser, at the sole discretion of Premier Machinery Auctions, may remain liable for the cost of storage, transportation, and resale of the item, including but not limited to any difference in price between that which the Purchaser owes for the purchased item and the net amount which the item ultimately resells for. Premier Machinery Auctions, Seller, or Owner reserve the right to resell any item remaining after the announced check-out period in any manner and for whatever consideration Premier Machinery Auctions, the Seller, or Owner in their discretion deem most advisable, without giving Purchaser notice or an opportunity to cure.
If the Purchaser fails to pay in full for the item, any deposit or other money previously paid to Premier Machinery Auctions will first be used to satisfy any amount owed to Premier Machinery Auctions. Notwithstanding application of the deposit or other funds, Purchaser will still be responsible for any difference between the amount owed to Premier Machinery Auctions and the amount deposited with Premier Machinery Auctions.
8. BIDDING MISTAKES. If a Bidder believes they have made mistake while bidding, they must immediately notify Premier Machinery Auctions of the alleged mistake. Failure to immediately notify Premier Machinery Auctions constitutes a waiver of any claim of a mistake. Regardless of the foregoing, even if the Bidder immediately notifies Premier Machinery Auctions of their actions, Premier Machinery Auctions is under no obligation to cancel or modify the bid, and may decide in its sole discretion that the Bidder remains fully responsible for their bid.
9. MOVERS AND REMOVAL. Any Purchaser contractors, including riggers and machinery movers, will not be allowed to work on the auction premises until they have provided Premier Machinery Auctions proper insurance, protecting Premier Machinery Auctions, the Seller, and the landlord from all and any claims resulting from their actions. Premier Machinery Auctions reserves the right to reject any proposed rigger or mover at its sole discretion. All removal, including disconnecting of utilities, will be at the sole expense, liability, and risk of the Bidder: provided however, that if such costs are incurred by Premier Machinery Auctions and notice is given, Bidder agrees to pay removal costs incurred by Premier Machinery Auctions in addition to the amount bid and accepted and other charges. Bidder is solely responsible for determining the amount of such expenses prior to bidding.
10. CONDITION OF LOTS. Due diligence to verify the condition and description of an item is the sole responsibility of the Bidder prior to placing any bid. Therefore, a Bidder shall examine or inspect items prior to the day of the auction or assume the risk. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. SELLER, OWNER, AND PREMIER MACHINERY AUCTIONS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY AUCTION ITEM. PREMIER MACHINERY AUCTIONS, OWNER, AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No allowance will be made for errors in cataloging, genuineness, defects, or imperfections, regardless of whether they were previously disclosed.
11. ADDITIONAL AUCTION TERMS. Premier Machinery Auctions reserves the right to periodically change the terms and conditions of this Agreement, and it is the Bidder’s responsibility to periodically review any and all changes made to this Agreement prior to each use of Premier Machinery Auctions website and other services. By continuing to bid, or otherwise utilize Premier Machinery Auction and its services, you agree to the terms, as modified from time to time, regardless of whether you have received actual notice of any update, modification, or other change. Premier Machinery Auctions will not modify these terms during the course of an auction.
12. MALFUNCTION. Any malfunction, shutdown or temporary loss of service involving the bidding process may, at the sole discretion of Premier Machinery Auctions, render the results of the auction void. In such an event, Premier Machinery Auctions reserves the right to remedy the situation in whatever way best represents the Seller, including canceling the existing bids.
13. OTHER INFORMATION. Premier Machinery Auctions relies on information about assets in the auction provided by the Seller and undertakes no investigation of that information. Premier Machinery Auctions shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty with respect thereto. Premier Machinery Auctions may announce additions to or deletions from the catalog on the day of the auction, or at any other time. Premier Machinery Auctions assumes no responsibility for, and makes no representations or warranties concerning, descriptions of assets contained in marketing materials for the auction.
14. INDEMNIFICATION. All Bidders and Purchasers agree to fully indemnify, hold harmless and defend Premier Machinery Auctions and its directors, officers, employees, agents, and affiliates (collectively “Indemnified Parties”) from and against all claims, actions, suits, demands, liens, damages, liabilities, obligations, losses, settlements, judgments, costs and expenses (including without limitation reasonable attorney fees and costs) whether or not involving a third party claim, which arise out of, relate to, or result from Bidder’s (1) violation or breach of any term, condition, representation or warranty of this Agreement; (2) improper or illegal use of Premier Machinery Auctions services; (3) violation, alleged violation, or misappropriation of any intellectual property right (including, without limitation, trademark, copyright, patent, trade secrets) or non-proprietary right of a third party; (4) purchase or use of any Auction Item; or (5) failure to comply with local, state, or federal laws or regulations; in each case whether or not caused by the negligence, but not gross negligence or intentional misconduct, of Premier Machinery Auctions or other Indemnified Party and whether or not the relevant claim has merit.
15. LIABILITY RELEASE. You release for forever discharge Premier Machinery Auctions, its directors, officers, employees, agents, and affiliates from any liability, including without limitation any liability for damages caused or allegedly caused by any failure of performance, error, omission, interruption, deletion, defect, delay in operation or transmission, communications line failure, theft or destruction of or unauthorized access to, alteration of or use of records, whether for breach of contract, negligence or tortuous behavior, or under any other cause of auction whether in law or equity. Premier Machinery Auctions and its directors, officers, employees, agents, and affiliates will not be responsible for any injuries (including death) or property damage resulting, caused by, or growing out of, the operation, attempted use, storage, or transportation of any Auction Item. Further, Premier Machinery Auctions, Owners or Sellers will not be liable for non-delivery or late delivery of any Auction Item, other than for the return to the Purchaser the sum paid on said Auction Item should Purchaser be entitled thereto due to Premier Machinery Auctions’ inability or election not to deliver an Auction Item.
You acknowledge that an auction site is a potentially dangerous place. Every person enters the auction site at their own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. By entering auction site you discharge and release Premier Machinery Auctions, its directors, officers, employees, agents, and affiliates from any and all liability from loss, injury (including death), or damages to persons or property sustained while in or on property owned, leased, or otherwise controlled by Premier Machinery Auctions, Sellers, or Owners.
PREMIER MACHINERY AUCTIONS WILL NOT BE LIABILE FOR INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES.
16. LIMITATION OF CLAIM PERIOD. YOU AGREE TO BRING ANY CLAIM YOU MAY HAVE AGAINST PREMIER MACHINERY AUCTIONS WITHIN THIRTY DAYS FROM THE DATE OF THE EVENT THAT RESULTED IN THE LOSS, INJURY, DAMAGE, OR LIABILITY OR THE SHORTEST DURATION PERMITTED UNDER APPLICABLE LAW IF SUCH A PERIOD IS GREATER THAN THIRTY DAYS. FAILURE TO BRING THE CLAIM WITHIN THE THIRTY DAY PERIOD WILL CONSTITUTE A WAIVER OF THE CLAIM.
17. ADDITIONS OR WITHDRAWALS. Premier Machinery Auctions may, in its discretion, offer the Auction Items for sale by the piece or by the lot, or in any manner that best serves the interest of the Seller. The Seller has the right to remove items from the auction either before bidding or after bidding has been completed. In the event of a removal after bidding has been completed, the Bidder’s sole remedy shall be the refund of any purchase price actually paid.
18. RECORD. The record kept by Premier Machinery Auctions will be taken as the sole, final, and official record in the event of any dispute (except for instances of manifest error).
19. AGENCY. Premier Machinery Auctions is acting only as an agent and is not responsible for the actions of the principals.
20. EXPORT. Purchaser agrees to comply with all applicable laws and regulations, including but not limited to United States export controls and laws, and acknowledges that Premier Machinery Auctions is not the exporter of any items. Certain Auction Items may be subject to restrictions that, among other things, do not allow the Auction Item to be transported out of the United States. Premier Machinery Auctions makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, are subject to any United States or foreign export restrictions.
21. COSTS OF COLLECTION. Premier Machinery Auctions shall be entitled to collect all damages, costs, and expenses incurred in connection with collection of any amounts owed to Premier Machinery Auctions or successfully defending any claims by Bidder, including without limitation reasonable attorneys' fees and costs.
22. DISPUTES. You agree that the laws of the State of Minnesota, without regard to principles of conflict of laws, will govern this Agreement and any claim or dispute that has arisen or may arise between you and Premier Machinery Auctions. Any disputes between you and Premier Machinery Auctions shall be governed by the laws of the State of Minnesota without regard to the provisions thereof which concern conflicts of laws.
YOU AND PREMIER MACHINERY AUCTIONS EACH AGREE, UPON DEMAND BY YOU OR PREMIER MACHINERY AUCTIONS, TO SUBMIT ANY AND ALL DISPUTES OR CLAIMS THAT HAVE ARISEN, OR MAY ARISE, BETWEEN YOU AND PREMIER MACHINERY AUCTIONS RELATING IN ANY WAY TO OR ARISING OUT OF THIS OR PREVIOUS VERSIONS OF THIS AGREEMENT, YOUR USE OF OR ACCESS TO PREMIER MACHINERY AUCTIONS’ SERVICES, OR ANY ITEMS OFFERED OR PURCHASED THROUGH PREMIER MACHINERY AUCTIONS TO FINAL AND BINDING ARBITRATION. THE ARBITRATION WILL BE CONDUCTED BY A SINGLE ARBITRATOR PURSUANT TO RULES ESTABLISHED BY THE ARBITRATOR, AND WILL TAKE PLACE EXCLUSIVELY IN RAMSEY COUNTY, MINNESOTA. IF THE PARTIES ARE UNABLE TO AGREE ON AN ARBITRATOR WITHIN 14 DAYS OF DEMAND FOR ARBITRATION, THE DEMANDING PARTY MAY SEEK APPOINTMENT OF AN ARBITRATOR FROM THE COURT.
YOU AGREE THAT THE PURCHASE OF AUCTION ITEMS OCCURS IN MINNESOTA REGARDLESS OF THE LOCATION OF THE SELLER, OWNER, OR AUCTION ITEM. IF NEITHER YOU NOR PREMIER MACHINERY AUCTIONS DEMANDS ARBITRATION, YOU AGREE THAT ANY CONTROVERSY UNDER THIS AGREEMENT OR OTHERWISE ARISING BETWEEN THE YOU AND PREMIER MACHINERY AUCTIONS SHALL BE LITIGATED EXCLUSIVELY IN MINNESOTA. YOU IRREVOCABLY CONSENTS TO SERVICE, JURISDICTION, AND VENUE OF SUCH COURTS FOR ANY SUCH LITIGATION AND WAIVE ANY OTHER VENUE TO WHICH YOU MAY OTHERWISE BE ENTITLED TO.
YOU AND PREMIER MACHINERY AUCTIONS HEREBY KNOWINGLY, VOLUNTARILY, AND IRREVOCABLY WAIVE ANY AND ALL RIGHT TO A TRIAL BY JURY IN ANY LEGAL PROCEEDING.
24. ENTIRE AGREEMENT. This Agreement contains the entire understanding of the parties hereto with respect to the subject matter addressed herein and supersede all prior agreements, discussions, negotiations and understandings between the parties hereto with respect to such subject matter.
25. REMEDIES. Nothing in this Agreement shall be construed as a limitation of remedies available to Premier Machinery Auctions, its agents, assigns, or indemnities. Premier Machinery Auctions, its agents, assigns, or indemnities reserve the right to pursue all remedies available including, but not limited to, all remedies at law or in equity.
26. AUTHORITY. By accepting these terms and conditions, you represent and warrant that you have the full right, power, and authority to enter this Agreement and to perform the obligations contemplated herein. The individual accepting these terms on behalf of an entity represents and warrants in their individual capacity that they have the authority to bind the entity to these terms and conditions.
27. SEVERABILITY. If any term herein is to any extent illegal, otherwise invalid, or incapable of being enforced, either in its entirety or in a particular application, such term shall be excluded to the extent of such invalidity or unenforceability; all other terms shall remain in full force and effect; and, to the extent permitted and possible, the invalid or unenforceable term shall be deemed replaced by a term that is valid and enforceable and that comes closest to expressing the intention of such invalid or unenforceable term.
28. CAPTIONS. The captions and headings contained herein are inserted only for the purpose of convenience, and in no way define, limit, or prescribe the scope or intent of this Agreement.
29. ASSENT TO TERMS. By proceeding with the creation of a bidding account with Premier Machinery Auctions, you acknowledge that you have had an opportunity to fully read and understand the terms contained herein.
30. SINGULAR AND PLURAL. Words used herein in the singular, where the context so permits, shall be deemed to include the plural and vice versa. The definitions of words in the singular herein shall apply to such words when used in the plural where the context so permits and vice versa.
31. NON-WAIVER OF BREACH. Any waiver of this Agreement must be in writing. The waiver of any breach of any provision of this Agreement or failure to enforce any provision shall not operate or be construed as a waiver of any subsequent breach by any party.
#.1 • READ IN FULL BEFORE BIDDING!
All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item conditions/values. Provided specifications and approximations are subject to bidder verification. It is the responsibility of the bidder to read the auctions details outlined below. Nearly every question you may have regarding this auction can be answered below. Please read item descriptions completely as certain items may have a specific removal date, loading fees, condition reports, location, etc. Please make sure you provide up to date contact information for registration. Auction sites can be dangerous. Possible hazards include, but are not limited to: slip, trip, fall, crush, electrocution. Please wear proper attire and do not bring children into this building. Auction Location: 8370 W. 35W Service Drive NE Blaine, MN 55449 Unless noted otherwise in item descriptions. Items at "offsite" locations must be removed within the scheduled removal period. Rigging information will be posted on larger items. Buyers must hire a licensed and insured rigger for these items (Normally the posted rigger per the sellers request). All payments must be made at our office. Payments will not be accepted at "offsite" locations. UPS shipping and LTL are not available for offsite items. Associated Fees: Buyers Premium: 15% Sales Tax::8.375% Card Convenience Fee: 4% Payment can be made onsite by Cash, Credit, Check (Checks over $2000 will not be accepted without a Bank Letter of Guarantee), Wire (Buyer Must Add $15 for Transfer Fee), Wire Transfer instructions will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day). Auction Preview: Wednesday, November 18th from 8:00 am to 3:00 pm or daily by appointment only. Auction Closing: Thursday, November 19th Beginning at 10:00 am This auction will close at a rate of (5) lots per minute with 1 minute extended bidding. Auction Checkout: (Closing times are sharp) Monday, November 23rd from 8:00 am to 3:30 pm Tuesday, November 24th from 8:00 am to 3:30 pm Wednesday, November 25th from 8:00 am to 3:30 pm Payment and removal is due by 3:30 pm of Wednesday, November 25th. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% card convenience fee. Rigging: Larger items requiring a forklift to load will display a loading fee. This fee will not be added to your invoice. Please add any loading fees to your total if you require this service. We ask that buyers bring appropriate trailers/transportation for their purchases. Excessive strapping, blocking, disassembly will result in increased loading fees. Buyers are free to load their purchases at our facility using non-powered equipment but must bring their own help as auction staff will not assist. Buyers will be responsible for any damages/injuries caused while loading their own purchases. Ground level removal only. Plan accordingly. Shipping: Available for "Hand Carry" Type Items Only. Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up. UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300. The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in item abandonment regardless of payment status, and an irrevocable permanent ban from all future auctions. Auctioneer: Jim Nelson (612) 991-7008 jim@premiermachineryauctions.com License no. MN 62-26-06
#1 • Thermo Haake Phoenix II B7 Circulating Bath Unit.
Stainless Steel Reservoir Basin, Digital Push-Button Controller, 230 Volt, Single Phase, S/N: 1200802348002. Approx. 10"×16"×20".
#2 • Apex Dynamics No. AB142-025-S2-P0 Precision Planetary Gearbox.
25:1 Gear Ratio, Backlash Rating of 3 arcmin or less, S/N: 1110124831
#3 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 CC, with 8 inch Bit.
#4 • Kitagawa No. B-206 6" 3-Jaw Chuck.
Fits A2-5 Spindle.
#5 • Lista 8-Drawer Cabinet with Contents
Approx. 28-1/2" x 28-1/2" x 60" Overall. Sold Without Key. $20 Load Fee
#6 • Simpson Model WS 2635 GHS Gas-Powered Pressure Washer.
9.0 HP Honda GX270 Engine, Pump Rated for 2600 PSI at 3400 Engine RPM, Spray Wand, High-Pressure Hose. Load Fee: $20.00
#7 • Invertek Drives P/N: ODV-3-520610-3F12-MN Variable Frequency Drive.
Digital Keypad Control Interface, Includes User Guide, 200-240 Volt, 50/60 Hz, 3-Phase Input at 50.5 A and 15 kW with a 0-Vin, 0-500 Hz, 3-Phase Output at 61.0 A and 20 HP, S/N: 67378421001.
#8 • New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#9 • Uline H-1565M-Y, 60-Gallon Flammable Storage Cabinet.
Approx. 34" x 34" x 65" Overall. Sold Without key. $20 Load Fee
#10 • Kennedy 10-Drawer Cabinet
Last Day Removal, With 54" x 20" x 1-1/2" Butcher Block Top. 34-3/8" Table Height. $20 Load Fee
#11 • (20) Solid Carbide Endmills.
Shanks from 1/2" to 3/4". Some Square End, Some Ball End, and Some Angled.
#12 • Reliance Electric No. 4L816656T1 E1 10 HP Motor.
Frame 256A, 1750-2400 RPM on 240 Volts, 3-Phase, Approx. Weight of 275 lbs. Load Fee: $20.00
#13 • Hobart Model 1712E, Commercial Meat Slicer.
Overall: 18" x 24" x 24". $20 Load Fee. No cutting tool Sharpenening Attachment.
#14 • Torque Wrenches Including James Morton No. JM-1000R and Snap-on No. TQR 250A
Includes a Torque Multiplier and More as Shown.
#15 • Iradion Laser, Inc Model 156F Laser Cutting and Engraving Unit.
CO2 Laser, 100-120 Volt, S/N:05AA01D83D66. Approx. 39"x32"x40". Load Fee: $20.00
#16 • Danfoss ICS 100-BL No. 148X0539 Differential Pressure Regulator Valve.
With a CVP-L Pilot (027B0930) and EVM NC Pilot (027B1120) Rated for PS 52 bar (754 psig) from -60°C to +120°C (-76°F to +248°F), Electric Wide-Opening and Shut-Off Control. Load Fee: $20.00
#17 • Harrington Model ER050L 5 Ton Electric Chain Hoist.
H4 Duty Rating, 12 ft/min Lifting Speed, 2-Button Pendant Control, CM Series 633 5-Ton Ball Bearing Trolley, 208-230/416-460 Volt 3-Phase, In Wood Crate, Approx. 63"x29"x37". Load Fee: $20.00
#18 • Harrington Code NER050L 5 Ton Electric Chain Hoist on Metal Frame Storage Cart.
Last Day Removal, Size F, Duty Class H4,14 ft/min Lifting Speed, Chain Container, Pendant Controller, 3 Phase, S/N 00096863 (2011). Frame Approx. 42"×36"×61". Load Fee: $20.00
#19 • Large Quantity of Pallet Racking
LAST Day Removal Only. Including: (13) 42" x 96" Uprights and (36) 96" x 5" Crossmembers. $20 Load Fee.
#20 • Peter Wright 220 Lb. Anvil.
Approx. 1-1/8" Hardy Hole, 3/4" Pritchel Hole. 29-1/2" Overall Length. 17-3/4" x 5" Anvil Surface. 11-1/2" Horn. With (1) Hardy Hole Flat Plate Accessory. $20 Load Fee.
#21 • Little Machine Shop Model 4190 HiTorque Deluxe Mini Mill.
16" x 5" Table with 3" Machine Vise, R8 Spindle with Drill Chuck and ER-43 Collet Holder with Collets, 11.8" x 5.1" X/Y Table Travel, 10.6" Vertical Z Travel, (Also Includes 2" Riser Block), 100-2500 RPM, Quick Connect DRO, Overall: 28" x 22" x 28". And Approx. 150 Lbs. Includes Tooling Shown. $20 Load Fee.
#22 • ITW Gema Model PGC1, Powder Coat Application System.
Overall: 22" x 28" x 44".
#23 • Spider Model MP Spider 1000 Aluminum Modular Suspended Staging Platform.
1,500 lb (680 kg) Maximum Rated Load Capacity, (2) Zmac 1000 Ver. II Electric Traction Hoists, Coiled Steel Wire Rope, On Casters, 208 Volt. Approx. 140"×28"×61". Also Includes Lift Basket and Job Box with (2) Transformers, Pendant Control and More. Basket Approx. 33"×37"×90", Job Box Approx. 52"×27"×25". Load Fee: $60.00
#24 • Ridgid Model TS2410LS 10" Portable Table Saw.
Mounted on a TS-UV Folding Wheeled Stand, Rip Fence, Miter Gauge, 120 Volt, Approx. 42"×30"×35". Load Fee: $20.00
#26 • Parker P/N: 1H2A0000255246 Double Acting Pneumatic Tie-Rod Air Cylinder. Model 8.00BB2ALU14A7.000
250 PSI Operating Pressure Rating, 8" Bore and a 7" Stroke. Approx. 9"×9"×18".
#27 • Assorted Tooling.
Including 1/32" to 3/8" Drill Chuck on 3/8" Straight Shank. (1) 3" 3-Jaw Chuck Mounted on Fixture Plate. And (1) 1-1/4" Indexable Endmill.
#28 • Countersinks, 1/4", 60°- 90°.
#29 • Gast No. DAA-V715A-EB Oil-Less Diaphragm Vacuum Pump and Compressor
Operates up to a Maximum Pressure of 4.08 bar (60 PSI) and Includes Dual Heads, Includes Manual, Appears Unused, 115 Volt.
#31 • (5) 14-1/2" Dia. Mostly Glass Lenses for Optical Comparator.
Far Right is Thick Plastic.
#32 • (2) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#33 • Ingersoll-Rand Model LE5D050M4 5 Ton Electric Chain Hoist on Metal Frame Cart.
Last Day Removal, Lifting Speed: 11/4 ft/min, Pendant Control, Chain Container. 3 Phase, S/N: 6068-0191H, Frame Approx. 42"×36"×61". Load Fee: $20.00
#34 • (2) Food Warmer Lamp Stands.
#35 • J.A. Fay & Egan Co. No. 557 Vertical Bandsaw.
24"×23-1/2" Tilting Table, Throat Depth Approx. 20", 139" cutting tool, Servo Driven cutting tool Tensioner, 1 HP, 220 Volt, 3-Phase, Approx. 39"×24"×80". Load Fee:$20.00
#36 • ATS No. 5050 B02 A5-5CB1 AR-5 Spindle Nose.
#37 • 8 Drawer Wood Tool Box.
Felt Lined Drawers. With Keys. Approx 10" X 20" X 16".
#38 • Assorted Microscope Stands, Parts and More.
#39 • (2) Starrett Micrometers
Starrett No. 444.1 0-1" and 1-2". .0001" Resolution, Carbide Anvils in Plastic Cases.
#40 • Delta Cat. No. 43-379, Shaper.
2-Speed, 3 HP, 27" x 28" Cast Iron Table Top. 230V. Single Ph. Overall: 27" x 28" x 34". Note: Handle Shaft is Bent. $20 Load Fee.
#41 • Countersinks, 5/8", 60° - 90°.
#42 • (3) Fastenal Metal Small Parts Storage Bins with Contents
Approx. 18" x 12" x 3-1/8", Includes: Brass Fittings, Random Screws, Washers, and Nylon Hardware.
#43 • Sartorius Lab Balance.
Quintix Lab Balance with Manual and 100 Gram test weight. Includes Power Supply and Vinyl Cover.
#44 • (25) Carbide Endmills 3/4"- 3/8"
#48 • Bearings, Gears and Isolation Mounts.
Mounts are Approx. 10"×8"×6", Gears are Approx. 6" Diameter x 3-1/2". See Photos for Bearing Part Numbers.
#49 • (6) 8" Diamond Grinding Wheels.
Includes Tru Tech Systems and 3MPart Numbers Include D220 and D500 Grit, Sizing Includes 1A1J 8-.75-3-1.25 and 1A1 8-.5-3-1.25.
#50 • 8' x 5" Acorn Welding Table.
Last day removal only. 1-3/4" x 1-3/4" Knockouts, 36" Table Height. Note: Risers are Bolted on One Side and Not Bolted on Other Side. $50 Load Fee as Shown. $150 if Buyer Wants Platen Seperated from Base.
#51 • New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#52 • Torit TD454-SA, Collection System.
115 Volt, 1-Phase, s/n: IG302324-2, Approx. 37" x 51" x 60" (Measurement Exludes Snorkel). $20 Load Fee
#53 • Miller Model Miller magic 130XP, 115V. Wire Feed Welder.
Output: 18V. 90 Amps, 20% Duty Cycle, 28 Max OCV, 30-130 Amp Range. Includes Ground Clamp and Tweco Mig hunting item Missing Splatter Cap. Overall: 11" x 16" x 16".
#54 • Stuhr Grinding Wheel Balancer.
Model BT-10, Missing Connecting Rods
#55 • Pipe Bender on Stand.
With Full Set of Dies.
#56 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#57 • Reelcraft Model 5635 OLP, Pneumatic Retractable Hose Reel.
Overall: 14" x 6" x 16".
#58 • Metal Propane Bottle Storage Lockable Cage.
Stores (4) Bottles. Overall: 32" x 38" x 38". $20 Load Fee.
#59 • Justrite 45 Gallon Cap. Flammable Storage Cabinet.
Overall: 43" x 18" x 65-1/4". $20 Load Fee.
#60 • Timesavers Model 50-19MW Belt Sander
Last Day Removal, 19" Belt Width, 18-3/4" Conveyor Width, 7.5 HP, 230/460 Volt, 3-Phase, s/n: 23300, Approx. 53" x 50" x 78" Overall. $50 Load Fee
#61 • Surface Plate with Dial Height Gage.
Black Granite Surface Plate Approx 9" X 12" X 3". Plus 6" Dial Height Gage and Surface Gage.
#62 • Model Kits.
Drill Press Model Casting Kit, with 3/16" Globe Valve Kit and Model Flywheel Castings.
#63 • (3) Gage Pin Sets.
50 Piece Minus Set from .011" to .060". And 190 Piece Minus Set from .061" to .250". And 250 Piece Minus Set from .251" to .500". NONE MISSING!
#64 • Setup Blocks.
(2) Sets 1-2-3 Blocks. Pair of V Blocks Approx 1.5" Square. And Right Angle Plate Approx 3" X 3" X 3".
#65 • Lista 8-Drawer Cabinet with Contents
Approx. 28-1/2" x 28-1/2" x 60" Overall. Sold Without Key. $20 Load Fee
#66 • Lifeplus Model IFH12A-75 Ceiling Mounted Heater.
Also Includes Larin 12 Ton Hydraulic Bottle Jack.
#67 • Darex Drill Sharpener.
Darex Drill Sharpener on Stand. 1/3 Hp 115 Vac 4.2 Amps.
#68 • Volstro Contour Grinder Kit.
Volstro Contour Grinder with Accessories in Fitted Wooden Case.
#69 • Reelcraft Model TW7450 OLP, Retractable Oxy-acetylene Hose Reel.
Overall: 19" x 8" x 22".
#70 • Rockwell Cat. No. 37-220, 6" Jointer.
Max Depth Cut 1/2". 3/4 HP, 120V. Overall: 48" x 22" x 39". $20 Load Fee.
#71 • Unknown Type Transformer.
Last checkout day removal only! No Data Plate or Sticker. Overall: 36" x 24" x 34". $20 Load Fee.
#72 • Countersinks, 1", 60° - 90°.
#73 • (4) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#74 • (11) Metal Small Parts Containers
Approx: 18-5/8" x 12-3/8" x 4-1/4", Includes: Fuses , Shrink Tubes, and Bolts.
#75 • DeZurik P/N: 9718243R3 6" cutting tool Gate Valve Assembly.
316 Stainless Steel Body and Gate Rated for 150 CWP at up to 500°F, Pneumatic Cylinder Actuator Rated at 100 psi and a PMV P5 Pneumatic Positioner with a 3 to 15 psi Input Range and 150 psi Maximum Supply Pressure, 6" Port Size, S/N: C2424122. Approx. 14"×38"×12". Load Fee: $20.00
#76 • Ingersoll-Rand Model LE5D050M4 5 Ton Electric Chain Hoist on Metal Frame Cart.
Last Day Removal, Lifting Speed: 11/4 ft/min, Pendant Control, Chain Container. 3 Phase, S/N: 6068-0191H, Frame Approx. 42"×36"×61". Load Fee: $20.00
#77 • (15) Assorted Mostly Command CAT-40 Tool Holders.
#78 • Miller Model SRH-333, Constant Current DC Arc Welding Power Source.
S/N: JE832693, Primary: 208/230/460V. 64/58/29 Amps, 3 Ph. 23.1 KVA, Secondary: 32 Volts, 300 Amps, 60% Duty Cycle, 75 Max OCV. Welding Range: 15-375. Overall: 22" x 36" x 28". $20 Load Fee.
#79 • New 57" ATV Snow Plow cutting tool.
LAST DAY REMOVAL ONLY! 15" Distance Between Mounting Brackets. No Mounting Hardware Included. No Cutting Edge as Shown.
#81 • Wild Hare 48" 3-Point S-Tine Cultivator
Type 0, 3-Point Mounting. Spring Tines and Sweep Shovels.
#82 • 4" Vise on Swivel Base.
Believed to be South Bend Vise on Swivel Base. Approx 4" X 11" X 4" Overall.
#83 • KDK 100 Quick Change Tool Post with Tool Holders.
KDK No. 100 Dovetail Tool Post with (8) Tool Holders. (2) KDK-101, (2) KDK-102, (2) KDK-103, (1) KDK-104 & (1) KDK-155 Boring Bar 1-1/4" Holder.
#84 • Huot 118 Piece Drill Set.
Made in USA Drills in Huot Holder. Missing #53, 45, 38, 21. Letter V, 5/16", and 31/64".
#85 • Heidenhain Model ND1202, Quadra-Chek DRO with Scales.
(1) Acu-Rite 4" Scale, (1) Acu-Rite 8" Scale. Click on 2nd Photo for Video
#86 • (4) New Hydraulic Cylinders.
Approx. 7" Stroke, 16" Distance Between Mounting Brackets.
#87 • cutting tool Welder
Unknown Mfg and Condition. Approx. 12"×12"×18".
#88 • Atlas Metal Industries NSF 4-Basin Steam Table Serving Bar.
Stainless Steel Construction. Data Plaque States 120/208V. But Appears 3-Ph. Plug as Shown. With Overhead Cover and Sneeze Guard. Drop Down Tray Slide Currently Removed as Shown. Overall: 64" x 30-1/2" x 36" to Serving Station Height and Additional 12" Riser to Top Shelf. $20 Load Fee.
#89 • (44) Carbide Endmills 1/8" to 3/8"
#90 • Clausing Model 5933 Manual Lathe.
6” 3-Jaw Chuck, L-00 Spindle Nose, (2) 6” Face Plates, Bed Length: 36”, Swing Over Bed: 12.25”, Swing Over Cross Slide: 7.25”, Distance Between Centers: 36”, Hole Through Spindle: 1.375”, Spindle Speeds: Back Gear-52-280 RPM, Direct Drive-360-2,000 RPM, Tailstock Taper: #3MT, 1.5” Diameter, 4.25” Travel, Includes Manuals, 220 Volt, Single Phase, S/N: 530200, Approx. 72”x26”x51” and 1,500 lbs. Load Fee: $50.00
#91 • Countersinks, 3/4", 82° - 90°.
#92 • Powereel Cat. Da03, 120V. Retractable Cord Reel.
14/3 Input Cable. Overall: 16" x 13" x 16".
#93 • (2) Milwaukee Solid Tire 2-Wheel Dollys.
#94 • Countersinks, (2) 1-1/2" 82° and (2) 1-1/4" 82°.
#95 • Gusher 11019NS-SE-A Centrifugal Pump.
Size 25026-5.00 impeller coupled to a 184TCZ frame electric motor operating on 3-phase power at 5.0 HP, 208-230/460 V at 3480 RPM (60 Hz) and 190/380 V at 2850 RPM (50 Hz). Identification markings include serial numbers 1423-883 and 14210620, with a stated motor weight of 98 lbs. Load Fee: $20.00
#96 • (36) Carbide Endmills 3/8" to 3/4"
#97 • New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#98 • Gusher Model 11019A-SE-A-CDM Vertical Immersion Pump with Baldor 2 HP Motor.
Fitted with a 25030-6.350 Impeller, 2 HP, 3-Phase motor, Overall Length Approx. 36"
#99 • Dayton Model 3Z709E, Wet/Dry Vacuum.
Last Day Removal, On 55-Gallon Drum Base with Rolling Cart. 120V.
#100 • Safag Type 118IA, Grinder.
.5 HP, 220 Volt, s/n: 1204, Approx. 24" x 18" x 58" Overall. $20 Load Fee
#101 • Keller Model 972, Fiberglass 12' A-Frame Ladder.
300 Lb. Cap.
#102 • Hardinge Tool Holders.
Hardinge L18 Quick Change Tool Post with L20A Knurling Holder and Hardinge L5 Boring Bar Holder for 1-1/8" Bar plus Reducer Bushing to 5/8".
#103 • Dumore Tool Post Grinder.
Cat. No. 1-011. 115 Vac 2 Amp. 15500 rpm no load. In Metal Case.
#104 • (5) Insert Toolholders.
(3) Top Notch Style Tool Holders. Kennametal NSR164D, NER122B, NEL123B. (1) Thinbit SFT12R, And (1) Kennametal A4SMR160217.
#105 • Lista 15-Drawer Cabinet with Contents.
Approx. 28-1/2" x 28-1/2" x 59-1/2" Overall. Lock has been drilled out. Sold Without Key $20 Load Fee
#106 • Number Drill Set.
Number Drill Set in Huot Index. Missing #20.
#107 • H/V Spacer with 3 Jaw Chuck.
Horizontal/ Vertical Space with 3" Diameter 3 Jaw. Approx 5" X 6" X 4.5". With extra set of Jaws.
#108 • Hand Grinders.
Dayton Model 2Z824 Hand Grinder. 22,000 rpm no load. 115 Vac 1.2 Amps. And Dremel MultiPro Model 395 Variable Speed 5,000-30,000 rpm. With 1/8" Accessories.
#109 • Justrite p/n: 894510, 60-Gallon Flammable Storage Cabinet.
Approx. 43" x 18" x 65" Overall. Sold Without Key
#110 • Shop Fox Model W1685, Dust Collector.
Last checkout removal day only! 1-1/2 HP, 110V. 1280 CFM Suction Cap. 2.5 Micron Filter Rating, 6" Inlet with Assorted Tubing, Collections Gates, Overall: 24" x 38" x 40". $20 Load Fee.
#111 • (40) 28" x 47" to 48" Length Pallet Rack Wire Deck Sections.
$20 Load Fee.
#112 • New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#113 • (2) Dial Indicators.
Mitutoyo Metric 7 Jewel Dial Indicator 0.080 mm Travel, .01 mm Resolution. Test Indicator 0.030" Travel, 0.0005" Resolution. With Accessories in Red Plastic Case.
#114 • Poweramp Powerhook Vehicle Restraint Hydraulic Cylinder.
Also Includes a Hydraulic Cylinder Approx. 2-3/4" Diameter x 36" and a Shafted with Splines on Each End with Keyway Approx. 2" Diameter x 33".
#115 • (6) Mitutoyo Micrometers.
Mitutoyo Micrometers 0.0001" Resolution. Carbide Tipped Anvils. 5-6", 6-7", 7-8", 9-10", 10-11", 11-12".
#116 • New Scherr Tumico .0001" Bore Micrometer
#117 • 3-Ph. Plug Ends.
.(4) Mennekes Type: 3853 IP67 Pin Plug and Sleeve Power Connector, 32 Amp, 400 Volt and ABL Type: S32S20A Pin Connection 32 Amp 250 Volt
#118 • L-TEC Model: PCM-SMi, 115 Volt Plasma Torch
Plasma cutting system includes an attached torch assembly, ground clamp, and rear-mounted air regulator with pressure gauge, operating on an input of 115 V, 1 phase, 60 Hz, and 20 A with an output rating of 90 V, 15 A, 180 max OCV, and a 30% duty cycle. The unit is designated with part number 680947 and serial number A87A-67733.
#119 • Believed to Be Delta 10" Table Saw.
Appears 230/460V. 3 Ph. Overall: 79" x 42" x 36". $20 Load Fee.
#121 • Emerson Copeland EVH-322114-R54BDN
Commercial HVACR EVH Series variable frequency drive rated for 40 HP (30 kW) with a Type 12 / IP54 enclosure, accompanied by an installation manual, test report, and hardware accessories. Electrical ratings include a 208-240 V 3-phase 50/60 Hz 94.3 A input and a 0-Vin 3-phase 0-400 Hz 114 A output, bearing serial number AS23J093G.
#122 • Kurt Precision Production Machine Slide.
Model AH60. T Slot Top Approx 6" X 16" with 6" Travel. Overall Approx 9" X 24" X 4".
#123 • Group of CCGT 21.50 Carbide Inserts.
CCGT 21.50 And CCMT21.50 Carbide Inserts.
#124 • (29) Carbide Endmills 3/16" to 3/8"
#125 • Fisher Type 9500/1052 Pneumatic Rotary Control Valve Assembly.
Includes an ANSI Class 125 Cast Iron Body Rated to 405 °F Maximum, a Nitrile Seat, Bronze Disc, Size 33 PDTC Actuator Operating at 0-18 psig, and a Series 3600 Valve Positioner., 3" Valve Size. S/N: 17517170.
#126 • (2) New sporting supply Type Filters.
(1) Donaldson No. P181036-016-140 and (1) NAPA NO. FIL 2608.
#127 • Countersinks, 7/8", 60° - 90°.
#128 • (8) New Hydraulic Cylinders
Approx. 8" Stroke, 16" Distance Between Mounting Brackets.
#129 • (16) CounterBores
#130 • Goulds Pumps Model 1396MTX Power End, Pump; Sleeve
4140 Keyway Drive Shaft, 316 Stainless Steel Sleeve, Flanged Housing, Approx. 11" Diameter x 20". Load Fee: $20.00
#131 • Edge Finders and More.
Starrett No. 827B Edge Finder. (2) Edge Finders with 3/8" Shanks. Indicator Holder Parts and Lufkin Micrometer Poster Sheet.
#132 • Penncraft Table Saw with Jointer.
Premium Penncraft 7.5" Table Saw with Jointer. With Rockwell 1 Hp 115 Vac 12.4 Amps, 3450 rpm. With Fence and Miter Gage.
#133 • Micro Endmills.
Carbide Micro Endmills. (6) 1/32" Endmills. (7) 0.031" Endmills. Plus More.
#135 • Huot 118 Piece Drill Set.
Made in USA. Huot Drill Holder. Stub Length Fractional and Letter Drills. Missing: #52, 51, 50, 45, 27, 25, 24, 23, 16, V, B, A.
#136 • Assorted Clamps.
C Clamps from 3" to 8". (2) Armstrong Model 79-403 T Slot Clamps 3-1/4" Capacity. Forged Frames. Made in USA.
#137 • B&S and Starrett Tap Wrenches.
(2) Brown & Sharpe Tap Wrenches. 3/16" to 1/2" and 0" to 1/4". (3) Starrett Tap Wrenches. (1) No. 174 Sizes 0 to 12. (2) No. 91B Sizes 3/16" to 1/2". Plus Tap Extensions.
#138 • (2) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#139 • Luftkin, Brown & Sharpe, Flynn.
Luftkin 915 Adjustable Parallel Set in Red Plastic Case. Brown & Sharpe 795 Wiggler Set in Blue Plastic Case. Flynn Boring Tool Company #11 Thread Wire Set.
#140 • Brown & Sharpe 510-2-1004 WSM 118
Last Day Removal, Approx. 86"×30"×50". Load Fee: $40.00 Industrial turret lathe equipped with an indexing tool turret, capstan handwheel, T-slotted cross slide table, feed selector controls, reversing switch, and flexible coolant line. Electrical specifications include 208 volts, 3-phase, 60 cycle operation with 110 volts control voltage and 3.6 full load amperes, stamped 510-2-1004 WSM 118.
#141 • (7) KDK 100 Tool Holders.
(1) KDK-101, (2) KDK-102, (3) KDK-103, & (1) KDK-205 for 1-1/2" Boring Bars.
#142 • 5C Emergency Collets.
(42) 5C Emergency Collets.
#143 • Assorted 1/4" Carbide Endmills.
Assorted 1/4" Carbide Endmills.
#144 • Machinist's Screw Jacks.
Assorted Screw Jacks with Accessories.
#145 • Inspection Tools.
(4) Starrett C391 Center Gages. Lufkin No. 212 Depth Micrometer with Extra cutting tool. (2) Multi- Leaf Thread Pitch Gages. Starrett No. 284 Gauge 29° Thread. (2) Small Calipers.
#146 • Mostly Corner Rounding Endmills.
Some Carbide. From 1/16" Radius to 3/8" Radius.
#147 • Assorted Drills.
C-L and Greenfield Drills from 17/32" to 57/64". Plus (3) Insert Drills.
#148 • (10) Erickson 100TG Collets.
21/32" to 7/8". In Plano Plastic Case.
#149 • Huot Drill Indexes.
(2) Fractional 1/16" to 1/2" by 64ths. (3) Number Drill #1 to #60.
#150 • FlexArm Tapping Station
Consisting of (1) Flexarm Hydraulic Tapping Arm with 3-Phase Control, s/n: 021709, (1) Wilton Pneumatic Tapping Arm, Assorted Sizes of Quick Change Tap Holders, Approx. 55" x 51" x 87" Overall. $50 Load Fee
#151 • Miller Model "Thunderbolt 225, CC/AC Single Ph. Stick Welder.
Rated Output: 225 Amps at 25 Vilts, 20% Duty Cycle, (2) Amp Ranges, Low Range From 30 to 150Amp, High Range From 40 to 225 Amp. Range Indicator Missing as Shown. But Lever does Adjust.
#152 • Stainless Steel Commercial Draft Hood.
Overall: 42" x 28" Overhang From Wall, x 35" Overall Height. $20 Load Fee.
#153 • Hitachi Model C 8FB, 8-1/2" Slide Compound Saw.
Mounted to Extended Length Table both Sides 4' Addition Table from cutting tool. Overall: 96" x 24" x 20". 120V. $20 load Fee.
#154 • Honda Model "Harmony FG100, 10" Garden Tiller.
Seller States Engine Runs Great but Worm Gear for Tiller Worn out. Also Includes Pair of Loppers.
#155 • Praxair/Prostar Model TEU, Fume Extractor.
Includes Mig hunting item with Build in Tip Extraction Fume Collector Hose. And Consumable Tip Replacement Pieces. 240V. 16 Amp. Single Ph. Overall Extraction Unit Measures: 24" x 28" x 25". $20 Load Fee.
#156 • New 57" ATV Snow Plow cutting tool.
LAST DAY REMOVAL ONLY! 15" Distance Between Mounting Brackets. No Mounting Hardware Included. No Cutting Edge as Shown.
#157 • (2) Reelcraft Model 5635 OLP, Pneumatic Retractable Hose Reels.
Each: 13" x 6" x 16".
#158 • Large Quantity of Assorted Eye Bolts.
Also Includes 42" x 30" x 31" Crate.
#159 • Mar-Bel Associates Model TTLS7, Single Cut Laminate Slitter.
36" x 12" Aluminum Table, Adjustable Back Gage 1/3 HP Electric Motor. Approx. 40 FPM Speed, 1/16" Die Kerf with 1/32" or Better Tolerance. 120V. Overall: 36" x 21" x 23". $20 Load Fee.
#160 • South Bend Cat. No. CL 187A Lathe with 60" Bed.
7-1/2" - 4 Jaw Chuck with L-00 Mount, Quick-Change Tool Post with (2) Holders, Tailstock, Taper Attachment, Wrenches, Parts Manual, 2 HP, 220 Volt, 3-Phase, S/N: 3732FKK17. Approx. 72"x32"x72". Load Fee: $50.00
#161 • General Model BS5202, 4" Benchtop Metal Cutting Bandsaw.
Horizontal Cutting but Also Modified as Current Set up is Vertical. Includes Stand. Max Cutting Cap.: 4-1/8" Round Stock, 4" x 4" Square. Overall: 12" x 29" x 26" Saw Only. Includes 20" x18" x 30" Stand. 120V.
#162 • Metal Framed Bench with Butcher Block Top
Last Day Removal, And Small Parts Bins Full of Fasteners. Bench Measures 72" x 38" x 55" Overall. 36" Table Height. $20 Load Fee
#163 • Hercules Model 6884, 500 Lb. Cap. Hydraulic Die Lift Cart.
42" Max Lift. Adjustable Forks, 22" Lenfth Forks, 24" Max Distance Between forks. Overall: 33" x 40" x 50".
#164 • (3) Wells Mfg. Co. NSF Stainless Steel Commercial Kitchen Appliances.
(1) 3-Basin Steam Table. 208/240 V. Single Ph. Overall: 60" x 40" x 34" with Glass 21" Height Safety Surround. And (2) L-Shaped P.O.S. Counters. (1) with Key (1) Locked Drawer. Each Measures: 40" x 36" x 34".
#165 • Lista 11-Drawer Cabinet with Contents
Approx. 28-1/2" x 28-1/2" x 60" Overall. Sold Without Key. $20 Load Fee
#166 • Pair of Bi-Directional Swinging Doors.
Last Day Removal, 36" x 82" Each. (1) Lower Bracket Missing as Shown.
#167 • (17) 52" x 46" Length Pallet Rack Wire Decking Sections.
$20 Load Fee.
#168 • Skil 115V. Drill on Custom Aluminum Fixture Base.
375 RPM. Jacobs 3/16" to 3/4" Cap Drill Chuck. Aluminum Fixture Base Measures: 15" x 24". $20 Load Fee.
#169 • (7) Uline Drum Spill Platforms.
LAST CHECKOUT DAY REMOVAL ONLY! (6) Model H-2762, 26" X 26" X 7", (1) Justrite Model H-4036, 2-Drum Spill Containment Workstation. Measures: 49" x 25" x 6". $20 Load Fee.
#171 • Forklift Jack.
Functions but Slowly. Likely Needs Additional Hydraulic Oil.
#172 • (2) U.S. CAT.# 6079 Carbonator Motors
1/3 HP, attached Fluid-O-Tech Rotoflow, 100-120/200-240 V Single-Phase.
#173 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#174 • (2) Gas Pressure Regulators and (1) Pressure Gauge
#175 • 2000 Lb. Cap. Essex Hydro-Dumper.
Last Day Removal, 33-1/2" Wide, x 38" Height To Cross Beam Support Internal Measurements. Missing Auxiliary Hydraulic Power Unit for Powering Rams. Dumps at Approx. 52" Height. Hydraulic Controls. Overall: 68" x 72" x 80". Load Fee $50.
#176 • Craftsman Power Hacksaws.
Model 108.1501 Craftsman 12" Power Hacksaw on Stand with Wheels. 115 Vac.
#177 • New Wild Hare Products 48" Bucket.
LAST DAY REMOVAL ONLY! Overall: 48" x 18" x 14". Approx. 46" Distance From Center of Center of Lower Bucket Mounts.
#178 • New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#179 • (10) New Hydraulic Cylinders
Approx. 8" Stroke, 16" Distance Between Mounting Brackets.
#180 • GMC Machine Tools Corp Model WDC-2100, Wet Dust Collector.
Last Day Removal. 5 HP, 440 Volt, 3-Phase, s/n: A24061845, Approx. 54" x 45" x 85" Overall. Seller States: Purchased Brand New. Put Into Sevice Briefly But Did Not Work for Their needs. $50 Load Fee
#181 • Atlas Metal Industries Model BLC-3 RM Refrigerated Cold Food Serving Counter.
120 Volt, S/N: 77001. Approx. 50"x36"x54". Load Fee: $20.00
#182 • (2) Toolmaker Vises.
(1) Hold 2" X 3". Other Holds 2.5" X 3".
#183 • Powereel Cat. Da03, 120V. Retractable Cord Reel.
14/3 Input Cable. Overall: 16" x 13" x 16". Rayed at 600 V. 35 Amps.
#184 • Wood Workbench
Last Day Removal, With Custom Made Upper Shelf. Approx. 61" x 21" x 57". $20 Load Fee
#185 • Target Model Guardmatic 14" Masonary/Tile Saw.
Powered by 5 HP Baldor Motor, 208-230V. Single Ph. Small In Tray Coolant Pump, 22" x 16" Sliding Table. Overall: 24" x 40" x 62". $20 Load Fee.
#186 • Fixture Plate and Clamps.
Little Machine Shop Milling Machine 6" X 12" Fixture Plate with 1/4"-20 Clamping Set. And (4) Larger Clamps.
#187 • Miller Model Goldstar 400SS, Direct Current Arc Welding Power Source.
S/N: HH097390 Primary: 230/460V. 76/38 Amps, 3 Ph. 30 KVA, Secondary: 36 Volts, 400 Amps, 60% Duty Cycle, 70 Max OCV. Welding Range: 20-510. Overall: 23" x 43" x 37". $20 Load Fee.
#188 • Thern Inc. Model 565 Mobile Gantry.
1,000 lb. Capacity, No Hoist, Approx. 12' Between Frames, Approx. Minimum Height Under Beam: 8', A-Frame 6' at Base. Load Fee: $20.00
#189 • Ryobi Model DP100, 10" Benchtop Drill Press.
5-Speeds From 540RPM to 3600 RPM, 5" Throat, 8" x 7-1/2" Cast Table with Wood Fixture Top. Approx. 9" Max Distance From Table to Quill. 1/4 HP, 120V. Motor. Overall: 14" x 19" x 29".
#190 • Foley-Belsaw Co. Model 912, 12" Wood Planer/Molder.
Last day removal only. 6" Max Material Thickness. Overall: 26" x 41" x 38". 120V. $20 Load Fee.
#191 • Wright 3-Ton Double Sheave Crane Hook Block with Swivel Lifting Hook.
Also Includes Wright P/N: 70569-12 5/16" Wire Rope, Unknown Length.
#192 • Countersinks, 1/2", 60° - 90°.
#193 • (2) +GF+, Model 199 025 128, 3" PVC Type 025 Diaphragm Valves.
Last day removal only. Pneumatic Actuated. Box Also Mentions reference Number: "d90DN80 3".
#194 • (10) 32" x 58" Length Pallet Rack Wire Deck Sections.
$20 Load Fee.
#195 • 2-Speed Ceiling Mount Air Filtration Unit.
Last day removal only. Model M10, Overall: 35-1/2" x 25-1/2" x 13-1/2". 120V. 4.2 Amps. $20 Load Fee.
#196 • Moline Inc. Model 250, Bagel/Bun Slicer.
115V. Overall: 12" x 33" x 20".
#197 • (4) New Hydraulic Cylinders.
Approx. 7" Stroke, 16" Distance Between Mounting Brackets.
#198 • Mini V Blocks, Fly Cutters, Turning Tools.
Mini V Blocks, (3) Fly Cutters, 3/8" Turning Tools RH, LH, and Boring Bar. 4" Diameter Resin Bond Grinding Wheel.
#199 • Metal Frame Shop Stool & Lyon Parts.
(2) Backrest Parts for Lyon Metal Products Shop Stool. Plus Metal Frame Stool with Wooden Seat. Approx 17" X 17" X 25".
#200 • Mori Seiki Model MR-1500 20” x 60” Engine Lathe.
Last Day Removal, Swing Over Bed: 20”, Swing Over Cross Slide: 12”, Cross Slide Travel: ~12”, Distance Between Centers: 59”, Spindle Bore: 2”, spindle Speed Range: 28-1,350 RPM, Tailstock: #5 MT, 10” 3-Jaw Chuck, D6 Spindle Nose, Steady Rest, Manuals,10 HP, 220 Volt, 3-Phase, S/N: 623, Approx. 115”x48”x54” and 6,500 lbs. Load Fee: $100.00
#201 • Stanley Vidmar 6-Drawer Cabinet.
Last day removal only. 30" x 27" x 33-1/2" Overall. 1-3/4" Thick Wood Top. $20 Load Fee
#202 • (3) Lab Stands with Assorted Clamps.
(2) Fisher Lab Stands. Each Approx 7" X 13" X 24". One is Missing a Foot. With Assorted Clamps. (1) Unmarked Lab Stand.
#203 • Stanley Vidmar 10-Drawer Cabinet
On Wheels. Approx. 30" x 28" x 64-1/2". $20 Load Fee
#204 • 5/16" Carbide Endmills.
(9) 5/16" Carbide Endmills.
#205 • Lista 8-Drawer Cabinet with Contents
Approx. 28-1/2" x 28-1/2" x 60" Overall. Cabinet is Locked. Sold Without Key. $20 Load Fee
#206 • Antique Electrical Parts.
cutting tool Switches, Ammeter, Assorted Capacitors, Bread Boards, and Space Mouse.
#207 • Assorted Saw Arbors & Chucks.
(6) Saw Arbors. Shanks from 1/2" to 7/8". (4) Drill Chucks.
#208 • Assorted Collets & Arbor Spacers.
(3) ER20 Collets: 1/8", 1/4", 3/8". (3) ER16 Collets: 5mm, 6mm, 10mm. Small Collets of Various Types. 1-1/4" Arbor Spacers.
#209 • Mostly C Style Carbide Inserts.
(26) CCGH 32.50. Also Some CCMH 32.50 And Some CNMG 432. And Parts.
#210 • Wasino LG-81, CNC Gang Tool Lathe.
Last Day Removal, 4.75" x 4.75" Nominal Work Size, 18" Swing Over Bed, 21-5/8" X-Axis, 11-/16" Z-Axis, 2-1/8" Spindle Bore, 315 IPM X/Y Rapid Traverse, Fanuc 3T-C Control, SMW SP200 8" Air Chuck, Chip Conveyor, Aluminum Jaws, (3) Milling Attachments (Unknown Condition), IBM Computer, Monitor, Keyboard, Manuals, 3-Phase, Approx. 80" x 80" x 80" and 6,000 lbs Overall. Note: Seller Provided Photos and Videos. Seller States: As of 10/1/26, Machine has Been Removed From Service for (3) Weeks. Several Tooling Blocks will be Included, but Individual Tools Have Been Removed and Will be Sold with the Machine. Click on 2nd Photo for Video $100 Load fee
#211 • Indicator Holders.
(3) Magnetic Bases. (2) Indicator Holders for Spindles.
#212 • Custom Built PVC Wash Station.
Last Day Removal, (4) Basins, Missing (1) Glove, Overhead Lighting, Approx. 48" x 34" x 84" Overall. $20 Load Fee
#213 • Huot Fractional Drill Set.
Screw Machine Length Fractional Drill Set in Huot Index.
#214 • Mitee-Bite Uniforce Clamps.
Set of (4) Model 500 8-32 Clamps and Set of (4) Model 1000. 5/16-18 Clamps with Extra Parts.
#215 • Assorted Carbide Inserts.
Many Different Shapes and Sizes.
#216 • Xacto Kit, Brass Stock, & More.
Xacto kitchen items in Wooden Box. 1/8" Steel Stamps in Wooden Box. Brass Sheet .020" X 6" X 6 feet. Grommet Sets, Destaco Clamps and Assorted Sandpaper.
#217 • Di-Acro Spring Winder.
Di-Acro #1 Spring Winder.
#218 • Alcatel Vacuum Pump.
Pascal 2010 SD Compact Dual Stage Rotary Vane Vacuum Pump. 110/220 Vac 6.9/3.6 Amp. Tag says Has Oil Leak. Oil Removed, Motor Runs. Pulls Vac.
#219 • (9) Books on Quality & Taguchi.
(8) Hard Cover Books on Quality Engineering and Taguchi Methods. (1) Softcover titled In Search Of Excellence by Thomas J. Peters.
#220 • Lincoln Electric Weldanpower G8000
Welder Output:225 Amps, 25 Volts @ 100% Duty Cycle, 80 Max OCV. Aux. Power Rating: 115/230 Volt, 1-Phase. Briggs & Stratton 16 HP Engine, s/n: 9988-A1203114, Cart Mounted, Approx. 32" x 50" x 50" Overall. Seller States: Engine Cranks but was Unable to get it to fire. $20 Load Fee
#221 • Zebra Printer.
Model 110Xi4 with Manual and Cords.
#222 • Lenovo ThinkCentre PC.
Lenovo PC with 2.33 Ghz Core 2 Duo E6550 Processor. With Keyboard, USB Mouse, and Netgear WiFi Router.
#223 • (28) 5C Collets & (1) R8 Collet.
5C Collets in Metal Rack with (1) R8 Collet in 5 mm.
#224 • Angle Blocks & Mitutoyo Metric Caliper.
Mitutoyo No. 505-633 Metric 150 mm Caliper with Fowler Angle Block Set From 1/2 Degree to 30 Degree. And Taiwan Angle Blocks 30-60-90 and 45 Degree.
#225 • Auto Shop Equipment.
Retractable Trouble Light. Yale Pul-Lift. Oil Filter Wrenches. 1-7/8" Combination Wrench. Flaring Tool. 12 Volt Power Supply.
#226 • Assorted Clamps.
C Clamps from 1" to 2". Spring Clamps, (2) Vise-Grip. (4) Kant Twist.
#227 • Gear Cluster for Lathe.
(12) Gears for Unknown Lathe. Approx 5" X 16".
#228 • (4) Dial Indicators.
(2) 0-2" Travel. (2) 0-1" Travel. 0.001 Resolution. Faces Approx 2-3/8" Diameter.
#229 • (11) Cerrowire Partial Spools of Various Standard Wire
#230 • Sweco 42" Wide Vibratory Media Tumbler.
Last Day Removal, 42" Overall Dia. 10" Deep Basket, Rubber Coated Liner, 6 Hour Timer and Starter Control. 5225 Indicated Hours. 2.5 HP Motion Generator, 230/460V. 3-Ph. Currently Wired for 230V. Overall: 42" x 42" x 48". NOTE: Significant Rot on Base. $20 Load Fee.
#231 • Makita Model: BJR182 Reciprocating Saw, No Battery, Includes Model: DC18RA Charging Station
#232 • Grivna Machine Inc. Model 1200 Wet-Type Explosion Resistant Dust Collector.
Flow Capacity: 1200 CFM at Inlet, 220 Volt, 3-Phase, S/N: 931034. Approx. 34"×55"×88"(with top cover on). Load Fee: $20.00
#233 • Assorted Stainless Steel Electrical Enclosures, and More.
(2) Empty 24" x 9" x 30" (1) 27" x 14" x 24" and More Misc. Including Weigh-Tronix Model WI-120 Scale Control/Readout.
#234 • Cotterman "Master Step" 55" Height Safety Stair.
Overall: 53" x 27" x 84". $20 Load Fee.
#235 • Baldor-Reliance Cat. No. JMEWDM3558T Motor with a Centrifugal Pump Assembly.
2 HP, 1755 RPM Washdown Duty Motor on a 145JM Frame, Cast Stainless Steel sporting supplies Includes a 2.5" Inlet and a 2" Outlet, 230/460 Volt, 3-Phase, S/N: F2005193193. Approx. 20"×11"×10". Load Fee: $20.00
#236 • Carl Zeiss No: 319878 Microscope
#237 • Micropump Model: 152-306-316-81878 and (2) Diener Model: MA0208 Precision Pumps
#238 • (2) Marathon Motors Model: 5KH33GNA444AX
Continuous Duty AC Motors, 1/3 HP, Single-Phase, 100-120/200-240 Volt, 5.5-5.6/2.7-2.8 Amp.
#239 • (6) Watson Marlow Alitea Model: DM-5230-24SGN DC Motors
Appears to be New in Box, 24 VDC, 30 Watt Output.
#240 • Towmaster Model T-10P Tandem Trailer.
12,500 lb. GVWR, and a 12,000 lb. GAWR Tandem-axle, Trailer Deck Approx. 77"×138", Adjustable Pintle Hitch, Manual Tongue Jack, Tekonsha Breakaway Switch System with Battery.
#241 • (4) Card Readers, Office Phone and More.
Avaya 1210, Hypercom ICE 5500Plus, Zebra CRDCUP-TC2L4B-01, MagTek 30066005.
#242 • (4) 34" x 40" Length Pallet Rack Wire Deck Sections.
#243 • Assortment of Reamers, .1790-1.849 to 1.0071-1.0690 1/16.
#245 • Thread Pitch Gages and More.
V Thread Gage from 4-84 TPI. 29° Acme Thread Pitch Gage. Assorted 6" Rules. Small Squares. Radius Gage Set. Telescoping Gage Set. Wiggler Set. 1/8" Steel Stamp Set.
#246 • Assortment of Office Supplies and Equipment
Includes: (2) Boxs of Florescent Bulbs, Magnifying Light, Tape Dispenser and Electrical Timer.
#247 • Pyramid CE41C122P and Cornell Dubilier SLPX681M200A4P3
Cornell Dubilier SLPX681M200A4P3 snap-in aluminum electrolytic capacitors are rated for 680 µF, 200 V, 250 SV, and 85°C. Pyramid CE41C122P aluminum can electrolytic capacitors carry federal stock number 5910-171-3221 and are rated at 1200 MFD and 25 W.V.
#248 • (3) Calipers.
5" Fowler Dial Caliper. Shockproof. 6" Brown & Sharpe Dial Caliper. Swiss Made. And 12" Pittsburgh Digital Caliper.
#249 • (10) New Hydraulic Cylinders
Approx. 8" Stroke, 16" Distance Between Mounting Brackets.
#250 • Republic Lagun CNC Corp. Model 717-S CNC Vertical Milling Machine.
Table: 58”x11”, Travels: X-32”, Y-17”, Quill (Z)-7”, Knee-16”, Spindle Taper: #40 NMTB, Speed Range: 55-4,250 RPM, Workpiece Weight: 1,500 lbs., Lagunmatic-2100 Control, Manuals, Tool Holders, 230 Volt, 3-Phase, S/N: 42037, Approx. 105”x78”x97”, and Approx. 6,000 lbs. Load Fee: $200.00 Note: Motor was Removed to Clear Doorway at Sellers Building. It is Still Off and as Shown.
#251 • DR. ING/ Manfred Dreher Type: FT4 20/VT, Centrifugal Planetary 4-Barrel Finishing Machine.
Last day removal only. 4-Separate Drums/Barrels each with Approx. 5 Liters Volume Cap. (20) Liters Total Volume. 380V. With 220V. "Driving Voltage" Overall: 39" x 30" x 33". Adjustable Speed, with Timer. 8229 Hours. $20 Load Fee.
#252 • (5) Micrometers
All 0.0001" Resolution with Carbide Tipped Anvils. (2) Brown & Sharpe 1-2" and 2-3". (3) Scherr- Tumico Micrometers. 3-4", 4-5", 5-6".
#253 • (3) Sets Of Parallels.
(2) Sets 3" Wide. Dark Parallels 1/2", 5/8", 3/4", & 7/8". Silver Set In Box from 1/2" to 1" by 16ths, Plus 3/16" and (2) 5/32" and (2) 9/64". Wavey Set is 4.5" Wide. From 1/2" to 1-1/2".
#254 • 8" Face Plate with L-00 Mount.
Approx. 2-1/8" Thru Hole.
#255 • (3) Piece Micrometer Set
0-1", 1-2", and 2-3". Carbide Anvils, 0.0001" Resolution. In Fitted Plastic Case.
#256 • New 57" ATV Snow Plow cutting tool.
LAST DAY REMOVAL ONLY! 15" Distance Between Mounting Brackets. No Mounting Hardware Included. No Cutting Edge as Shown.
#257 • Buffalo Drill Press.
Floor Standing Drill Press. 3 Phase Plug.
#258 • Conductix Model 354418-10, 208V. 3Ph. Retractable Cord Reel.
Rated at 600 Volts, 16 Amps. Overall: 14" x 15" x 16".
#259 • 12-Drawer Cabinet
Approx. 30" x 28" x 59" Overall. Sold Without key. $20 Load
#260 • Assorted Hobby Machinist Books.
(6) Issues of Projects In Metal. From June 1994 to April 1995. Machine Shop Projects. Reprinted South Bend Lathe Works. Gear Cutting for Home Machinists, Backyard Foundry for Home Machinists, The Model Engineer's Handybook and More.
#261 • (17) Assorted Mostly Lyndex CAT-40 Tool Holders.
Includes Endmill, Collet and a Tap Holder.
#262 • Miller Model Dialarc 250 AC/DC, Constant Current AC/DC Arc Welding Power Source.
Input: 200/230/460V. Single Ph. Amp: 103/90/45, Output Varies along with AC and DC Input. See machine Data Plaque. Includes Extended Length Negative and Positive Lead Cables. Overall: 20" x 37" x 36". $20 Load Fee.
#263 • Electric Hydraulic Power Unit.
STAC DWG 237B Electric Hydraulic Power Unit with Rexroth Valve Control Unit. Ajax Electric Motor 1Phase 3/4 Hp 110/220 Vac. 1725 Rpm 10.6/ 5.3 Amp. Hydraulic Power Unit Approx 8" X 24" X 10".
#264 • I Gaging Clamp & Indicator Set.
Model 400-U37 7" Clamp and 0.030" Travel .0005" Resolution Indicator. In Plastic Case.
#265 • Lista 8-Drawer Cabinet with Contents
Approx. 28-1/2" x 28-1/2" x 60" Overall. Cabinet is Locked. Sold Without Key. $20 Load Fee
#266 • Carroll & Meynell 15KVA 3-Ph. Transformer.
LAST CHECKOUT DAY REMOVAL ONLY! See Data Plate for Additional Specs. Overall: 20" x 17" x 21". And 213 Lbs.
#267 • Automated Finishing Model PWS-51, Vapor Degreaser.
Last Day Removal. 32" Dia. Internal Rotating Carousel. 480V. 3-Ph. Overall: 74" x 68" x 92". Load Fee $50.
#268 • (37) 30" x 47" Length Pallet Rack Wire Frame Decking Sections.
$20 Load Fee.
#269 • Fostoria Model DK-60VA, Dock Light.
Approx. 62" Max Reach.
#270 • Allen-Bradley No. 1329LS-ZA00518NVC-RL Inverter Duty Electric Motor.
with a TENV enclosure and class H insulation, L215TC frame size, 230/460 Volt, 3-Phase, Load Fee: $20.00
#271 • New Wild Hare Products 48" Bucket.
LAST DAY REMOVAL ONLY! Overall: 48" x 18" x 14". Approx. 46" Distance From Center of Center of Lower Bucket Mounts.
#272 • Sunnen Honing Parts.
Sunnen Truing Sleeves, wedges, and More.
#273 • Torque Handle & Coolant Nozzles.
Kurt Torque Handle Model TH6. Coolant Nozzles with Manifold. (2) Grinding Wheels.
#274 • Protector Shooting Bags.
(2) Leather Shooting Bags. (1) with Ears.
#275 • Assorted Tools.
Seco MTGNR-8-2A Insert Holder. Boring Tool with 5/8" Shank. Seco SNR 00050 55-11 with 5/8" Shank. (4) Tool Mark Slitting Saw Arbors.
#276 • (3) Barrymounts, Vise Handles & More.
(3) Barry Controls LM3B. (3) Cast Iron Footpads. (2) Vise Handles: (1) Marked Kurt D60-24. Other Marked D6024. Plus Vise Stop and Other Parts.
#277 • Assorted Endmills.
Shanks from 1/8" to 1". HSS and some Carbide.
#278 • Assorted Machinist Parts.
(6) Chuck Jaws, Large V Block, Small Clamps, Helicoils, Bins, and More.
#279 • Juicebox Model: 2JBX401AJ Charging Station
#280 • Marvel Series 8 Model 8 Vertical Bandsaw.
Cast Iron Slotted Bed, Adjustable Angle Vise Clamp, Tilting Column, Includes Extra cutting tool, 480 Volt, 3-Phase, S/N: 88249. Approx. 81"×40"×84". Load Fee: $40.00
#281 • Metal Prep and Tubing.
Skyco Rusted Surface Prep (1) Gallon. Bonderite Conversion Coating for Aluminum. (1) Quart. Box of Tubing and More.
#282 • Atlas Metal Industries NSF Serving Station.
Stainless Steel Construction. With Overhead Lighting and Sneeze Guard. Also Includes Tray Slide but Missing Hardware Brackets for Mounting to Unit. 120V. Overall: 64" x 30" x 35" Height to Table Top and Additional 18" Height to Overhead Lighting Top. $20 Load Fee.
#283 • Tecumseh H50-65478P 5HP Horizontal Shaft Engine.
#284 • (30) New Peter Paul P/N: 71z0194AGM (CS-001646)
24V DC, Orifice Size: 3/16".
#285 • 48" x 48" Floor Scale.
Last day removal only. With Wall Mount DRO. Believed to be 5000 Lb. Capacity. Readout Powers Up Bit Does Not Display Anything. $20 Load Fee.
#286 • Reelcraft Model 6Z160, Pneumatic Retractable Cord Reel.
Believed Spring Return Needs Repair.
#287 • US Berkel Model MB7/16, 1/3 HP. Bread Slicer.
On Stand. Accepts 15" Length Loaves. Slicing Machine Alone Measures: 24" x 25" x 18". Cart Measures:25" x 18" x 29". $20 Load Fee.
#288 • Countersinks, 5/16", 60° - 90°.
#289 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#290 • Kurt 3600V, 6" Machine Vise.
No Handle
#291 • Assortment of Reamers .4441- .4600 to 1.1321- 1.1950
#292 • Go-No Go Plug Gages.
From .6870" to 1.627".
#293 • Angle Block and Spacer Block Sets.
Angle Block Set from 1/4° to 30°. Spacer Block Set from .050" to 1.0".
#294 • (11) R8 Collets in Holder.
R8 Collets from 1/8" to 3/4" by 16ths. In Painted Steel Holder.
#295 • Formech Model 508DT Vacuum Forming Machine.
Mitsubishi Electric GOT2000 Touchscreen Display, Analog Vacuum Gauge, Reducer Plates, Assorted Plastic Sheet Stock, 208-240 Volt, Single Phase, S/N: 2830 (2020). Approx. 56"x29"x49". Load Fee: $20.00
#296 • Assortment of Reamers, .1790- .1849 to .9451-.9760
#297 • Pair Large V Blocks.
Pair of 2.5" V Blocks with Clamps.
#298 • Rice Lake Rough Deck Model 4x8HP-5K, Platform Scale.
Last day removal only. 96" x 48", sold without Readout. Unknown Functionality. $20 Load Fee.
#299 • (2) New, KNF Model: PM31529-950.50 Diaphragm Vacuum Pump, 24V DC
#300 • Tsugami BS19-III CNC Swiss Type Screw Machine.
Last Day Removal, Max Machining Diameter: 19mm, Max Machining Length: 210mm, 10,000 rpm Max Spindle Speed, Full C-Axis on Main, Indexing on Sub Spindle, L20 Collet Type, Fanuc LK1 Controls, Tri-Mist, Mist Collector, Air Injection System, 200 Volt, 3-Phase, s/n: 1022, Approx. 80" x 46" x 96" and 5000 lbs. Note: Collets and Bushings NOT included. Guide Bushing Assembly and Drive Unit to Live Tooling, Amplifier have all Been Replaced Recently. Removed from Service on 9/24/26 Click on 2nd Photo for Video $200 Load Fee
#301 • Pair of 21-1/2" Height Steel Horses.
16" Wide Wood Top Surface.
#302 • 40 Lbs of 4" Lag Bolts.
Total Weight of 44 Lbs. With Bucket.
#303 • Standard Electrical Tool Co. Double End Polisher.
1 HP, 220 Volt, 3-Phase, Approx. 45" x 17" x 44". $20 Load Fee
#304 • Standard 48" Pallet Jack.
Marked Uline H-1048, and 5000 Lb. Cap. 48" Forks, 14" Distance Between Forks.
#305 • Lista 9-Drawer Cabinet with Contents
Cabinet is Locked and We Do Not Have a Key
#306 • Reelcraft Model TW7450 OLP, Oxy-acetylene Retractable Hose Reel.
Overall: 9" x 19" x 21".
#307 • Reliance Electric No. C1811ATCZ 5 HP Motor.
C-face Mounting Flange, Keyed Drive Shaft, 3-Phase. Load Fee: $20.00
#308 • Exide LA Type 18-Cell Battery Charger.
Last checkout day removal only! Model: NPC 18-3-680L, Input: 240/480V. 3-Ph. 20.4/10.2 Amps. Output: 680 Amp Hr. Cap. In 8 Hours. Max Amp DC. 110.84/30.6. DC Amp Meter Gauge Broken as Shown. Overall: 26" x 20-1/2" x 30". $20 Load Fee.
#309 • Assorted Clamps.
Kant Twist Clamps: (4) 3/4", (8) 1", (5) 2", (2) 3", (4) 4.5" and (1) 6". Plus Small C Clamps, small Toolmaker Clamps plus Spring Clamps and More.
#310 • Miller Deltaweld 452, CV DC Welding Power Source.
With 60 Series 24V Wire Feeder. Machine Output: 38 Volts, 450 Amps @ 100% Duty Cycle, 44 Max OCV. Machine Input: 200/230/460 Volt, 3-Phase, s/n: LH440072C, Approx. 30" x 52" x 50" Overall. $20 Load Fee
#311 • Machinist's Jacks.
Machinist's Jacks with Accessories.
#312 • (4) New Hydraulic Cylinders.
Approx. 7" Stroke, 16" Distance Between Mounting Brackets.
#313 • Countersinks, 3/8", 60° - 90°.
#314 • Harrington Code NER050L 5 Ton Electric Chain Hoist on Metal Frame Storage Cart.
Last Day Removal. Size F, Duty Class H4,14 ft/min Lifting Speed, Chain Container, Pendant Controller, 3 Phase, S/N 00096865 (2011). Frame Approx. 42"×36"×61". Load Fee: $20.00
#315 • Target Model Guardmatic 14" Masonary/Tile Saw.
Powered by 3 HP Motor, 115/230. Single Ph. Small In Tray Coolant Pump, 22" x 16" Sliding Table. Overall: 24" x 40" x 62". $20 Load Fee.
#316 • (2) Atlas Metal Industries NSF P.O.S. Checkout Counters.
Stainless Steel Construction. Each Measures: 30-1/2" x 36" x 35". Each with Cash Drawer and Underside Storage. $20 Load Fee.
#317 • Miller Model Goldstar 300SS, Direct Current Arc Welding Power Source.
S/N: JC659409, Primary: 230/460V. 58/29 Amps, 3 Ph. 23.2 KVA, Secondary: 32 Volts, 300 Amps, 60% Duty Cycle, 70 Max OCV. Welding Range: 15-375. Overall: 23" x 43" x 37". $20 Load Fee.
#318 • Speedaire 8 HP Gas Powered Air Compressor
30 Gallon Reciever Tank. Powered by Honda GX240 Engine. Engine Pulls Over. Mounted to Warehouse Cart. Compressor Alone Measures: 41" x 21" x 38". $20 Load Fee.
#319 • Reelcraft Model 5635 OLP, Pneumatic Retractable Hose Reel.
Quick Dissconnects on Both Ends.
#320 • Leblond Makino Regal Servo Shift 15" Engine Lathe.
Last Day Removal, Approx. 2-1/4" Hole Through, Approx. 52" Max Distance Between Centers, 10" 3-Jaw Chuck, #4MT Tailstock, Taper Attachment, Steady Rest, Removable Chip Pan, Acu-Rite DRO, 460 Volt, 3-Phase, s/n: 15C-682, Approx. 106" x 48" x 69" Overall. $100 Load Fee
#321 • Flowserve Code: .75-MG4-11D110T0M1GA 3-Way Relief Valve and a DeZURIK P/N: 9710394 PowerRac Cylinder Actuated Valve.
#322 • Sylvania 15 KVA 3-Phase Transformer.
LADT CHECKOUT DAY REMOVAL ONLY! Cat. NO. 152-414-3, See Data Plate for Additional Specs. Overall: 20" x 12" x 24". And Appears 250 Lbs. $20 Load Fee.
#323 • Fargo Electric 75 KVA 3-Phase Transformer.
LAST CHECKOUT DAY REMOVAL ONLY! Primary: 480V Delta 3-Phase Input. Secondary: 380Y/220. Overall: 25" x 22"x 30-1/2"". And 530 Lbs. $20 Load Fee.
#324 • Thread Go-No Go Gages.
Thread Go-No Go from 1/2"-20 to 1"-8. NPT Gages from 1/4" to 1/2".
#325 • Harig Model Super 612 Hand Feed Surface Grinder.
6"x12" Capacity, Walker Ceramax Magnetic Chuck, includes Harig Base Cabinet, Operation Manual, Sony DRO, an Additional 5"x10" Electro-Magnetic Chuck, Assorted Used Grinding Wheels. 220 Volt, 3-phase, S/N: 3364. Approx. Load Fee: $20.00
#326 • Assorted Hand Tools.
Assorted Wrenches, Hand Brace with Auger Bits. Snow Blower Chains and More.
#327 • Pneumatic Cylinder and Flanged Valve.
Parker pneumatic tie-rod cylinder operates at 200 envelope pressure with serial number RT128832 B, a 4.00 in bore, and a 6.000 in stroke. Fluoroseal three-way flanged valve body is constructed of CF8M stainless steel rated for class 150 with a 1 1/2 in size.
#328 • Countersinks & Counterbores
M.A. Ford 82° Uniflute Countersink Set. Imported Counterbore set With Interchangeable Pilots. And Some Assorted Counterbores.
#329 • Radius Turning Tools.
OWB Radius Turning Tool. And Proxxon Radius Turning Tool Kit. Both with Instructions.
#330 • Conquest Model M-13, Multi Spindle Boring Machine.
(13) Boring Spindles. Adjustable Backgauge. (2) Material Clamps. 66" Length Aluminum 80/20 Back Gauge with Stops. 110V. 11.8 Amps. Overall: 49" x 28" x 60". $20 Load Fee.
#331 • Boring Head Kit.
R8 Shank. 2" Diameter Head. With (9) Carbide Tipped Boring Bars.
#332 • Cushman 7-1/2" 3-Jaw Chuck with L-00 Mount.
2" Thru Hole, No Chuck Key.
#333 • Assorted Micrometers & More.
Uni- Micrometer with Interchangeable Anvils. Depth Micrometer. 0-1" Micrometer. 6" SPI Combination Square and Trigonometry Tables.
#334 • Presto Model P2436, Mechanical Die Lift Cart.
2000 Lb. Cap. 24" x 36" Top Plate. Missing Handle. Approx. 24" at Lowest Height Up to Believed to be 36" Max Lift when Raised. $20 Losd Fee.
#335 • Pneumatic Valve Actuator.
Approx. 12"×32"×18". Load Fee: $20.00
#336 • Tripod - M17
Cast Metal Mounting Head, Wood Legs, Leather Carrying Straps, Approx. 42" Long.
#337 • Powereel 120V. Retractable Cord Reel.
Overall: 14" x 14" x 17". Inline Power Cord 14/3 Power Cable.
#338 • HSS Tool Bits.
Sizes From 1/8" to 3/8". Mostly Square but Some Round.
#339 • Assortment of Reamers. .2121- .2199 to .6321- .6630.
#340 • Kurt 3600V, 6" Machine Vise
No handle
#341 • Countersinks, 1/8", 60° - 90°.
#342 • (2) Lead Screws Approx. 2" Diameter Screw and Overall Approx. 58".
#343 • Countersinks, 3/16", 60° - 90°.
#344 • Assorted Drills.
Fractional Extra Long Drills in Huot Index. Drills mostly Made In Japan. Plus (3) 61-80 Number Drill Sets. Plus More Drills.
#345 • Delta 6" Bench Grinder.
Model 23-645. 120Vac 2.5 Amps 3450 rpm.
#346 • Henry No. S-7721 ASME vertical accumulator.
Maximum Working Pressure of 450 psig (31.02 bar) with an Operating Temperature Range of -40 F to 650 F (-40.0 C to 343 C) for Refrigerants Including R134a, R404a, R502, R507, and R717. It has a Volume of 17.7 L with 2 1/8 in (54 mm) ODS Inlet and Outlet Connections. Approx. 8"×24"
#347 • Harrington Model ES100S 10 Ton Electric Chain Hoist on Cart.
Last Day Removal, Lifting Speed:10 FPM, Dual Chain Containers, 3-phasec Frame Approx. 40"×30"×64". Load Fee: $20.00
#348 • Assortment of Replacement Parts
Includes: Aluminum Rivets, Cotter Pins, Snap Rings, E-Clips, O-Rings and Fuses.
#349 • Neeltran Inc. 85 KVA 3-Phase Transformer.
LAST CHECKOUT DAY REMOVAL ONLY! Primary: 480V. 102.w Amp 3-Phase Input. Secondary: 380Y/220 129.1 Amps. Overall: 28-1/2" x 18-1/2" x 29-1/2". And 650 Lbs. $20 Load Fee.
#350 • Despatch V-Series Model VRC2-19-1E Horizontal-Airflow Electric Cabinet Oven.
Last Day Removal, Max. Temperature: 500°, Chamber Size: 24”W x 36”L x 36” H, Internal Volume: 19 Cu. Ft., Control: Digital 3-Mode PID Controller with Programmable Rate of Temperature Rise, Process Timing and Alarms, This Unit Designed with F.A. Duct: 6” Diameter, Exh. Duct: 3.12”x7.25”, F.A. Damper cutting tool Cut to .593” Open, Exh. Damper cutting tool Cut to #50 cutting tool, Minimum Purge Time Required: 5 Minutes, Type of solvent (Flammable Liquid or Gas): VM&P Naptha or Equal, 208 Volt, 3-Phase, S/N: VRC2-19-1E, Approx. 80”x38”x75”. Load Fee: $50.00
#351 • Stanley Vidmar 10-Drawer Cabinet
On Wheels. Approx. 30" x 28" x 64-1/2". $20 Load Fee
#352 • Import Type 6" Carbide Grinder.
1/2 HP, 3450 RPM, 115V. 10 Amp. Overall: 26" x 15" x 52". $20 Load Fee.
#353 • (2) Steel 74" x 39-1/4" Horses.
$20 Load Fee.
#354 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#355 • Pittsburgh Automotive 2-Ton Cap. Folding Engine Crane.
1/2 Ton Cap. At Max Extension.
#356 • Heavy Duty (66) Pocket Tooling/Stock Rack.
Last Day Removal, 5" x 5-1/2" Height x 36" Length Pockets. Overall: 45" x 37" x 75". $20 Load Fee.
#357 • Craftsman 3-Piece Rolling Tool Box.
Consisting of Model 706.597871 (5) Drawer Rolling Box Measuring: 26-1/2" x 18-1/4" x 32", Model 706.598830, 3-Drawer 26" x 12" x 12" Riser, and Model 706.597862, 7-Drawer Topper. 26" x 12" x 17". $20 Load Fee.
#358 • CM Hoist. "Hercules" 1/2 Ton Cap. Chainfall Hoist.
#359 • 120V. Down Draft Table.
Overall: 20-1/2" x 21-1/2" x 41".
#360 • Arrow Model WP48-116-V Forklift Work Platform.
1,000 lb. Load Capacity, Approx. 116"×48"×48". Load Fee: $20.00
#361 • Hevi-Duty 45 KVA Transformer
Primary 480 Delta, Secondary: 240 Delta/120 Overall: 26" x 17" x 30". On Rolling Frame. $20 Load Fee.
#362 • (2) Justrite Oily Waste Cans.
(1) 6 Gallon Cap with Foot Pedal Lifting. 13" Dia. X 16" Height. (1) Justrite Model 26730, Safety Drum Cover with Barrel. 21" Dia. X 30" Height.
#363 • (2) Steel 2-Shelf Shop Carts.
Last Day Removal Only. (1) 33" x 24" x 33-1/2". (1) 36" x 24" x 34".
#364 • J.E. Berger Corp. 30 KVA, Transformer
Primary: 600/575/550V. Secondary Volts: 240V. Quick Connect Cors Ends. Overall: 29" x 15" x 28".
#365 • Lista 8-Drawer Cabinet with Contents
Approx. 28-1/2" x 28-1/2" x 60" Overall. Sold Without Key. $20 Load Fee
#366 • Miller Model CP-302, CV-DC Welding Power Source.
Output: 32 Volts, 300 Amps, 100% Duty Cycle, 44 Max OCV, Input: 200/230/460V. 3-Ph. 38/33/16.5 Amps. Welding Lead Ends Cut as Shown. Overall: 24" x 48" x 34". $20 Load Fee.
#367 • Fractional & Number Drill Sets.
Screw Machine Length Fractional Drill Set in Huot Index. Number Set in Huot Index. Missing #7, 8, 12, 26, 35, 36, 38.
#368 • Coleman Powermate 6250, 5000 Running Watts Generator.
Powered by Briggs and Stratton 10HP Motor. Engine Has Compression. Overall: 25" x 18" x 22". $20 Load Fee.
#369 • New Wild Hare Products 48" Bucket.
LAST DAY REMOVAL ONLY! Overall: 48" x 18" x 14". Approx. 46" Distance From Center of Center of Lower Bucket Mounts.
#370 • Bridgeport 1-1/2 HP Variable Speed Vertical Milling Machine.
42"×9" Table, R8 Spindle, Anilam Wizard150 Plus DRO, 60-3000 RPM, 220 Volt, 3-Phase, S/N: 163938, Approx. 58"×60"×83".
#371 • (2) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#372 • Mitutoyo 0-1" .00005", 0.001mm Electronic Micrometer
Needs a Battery.
#373 • Emerson/Hevi-Duty 6KVA Transformer.
Primary: 480 Delta, Secondary: 240D/120CT, Cat. No. HT5F6AS. $20 Load Fee.
#374 • (12) Automufflers
#376 • (2) New, KNF Model: PM31529-950.50 Diaphragm Vacuum Pump, 24V DC
#377 • (3) Countersinks, 2" 82°.
#378 • Assorted Plastic Bins as Shown.
#379 • Knaack Model Jobmaster 4830, Job Box.
Last day removal only. Lock Keys Included. Overall: 48" x 30" x 38-1/2". $20 Load Fee.
#380 • Delta 34-806, 10" Unisaw
Biesemeyer T-Square cutting tool Guard, X-Axact Fence, 5 hp, 3-Phase, s/n: 88K88150, Approx. 80" x 36" x 55" Overall. $20 Load Fee
#381 • Lee Engineering/Presto 1000 Lb. Cap.
Model: WXF36-10, Table Measures: 48" x 36". 27" at Rest Up to
#382 • (8) 3" Metal Casters
#383 • Dayton Model: 1TDR7 Blower, 115 Volt.
#384 • O-Rings Includes (300) Item OR-387E70 and (5000) Item MOR-36X4-N7L
#385 • Equipto 9-Drawer Tooling Cabinet.
Ball Bearing Slide Drawers. Overall: 30" x 28" x 59". $20 Load Fee.
#386 • Louisville Model FE3232, Fiberglass 32' Extension Ladder.
300 Lb. Cap. LAST DAY REMOVAL ONLY
#387 • Assortment of Endmills 1/8" to 3/4"
#388 • Large Quantity of Light Duty Pallet Racking.
Last Day Removal, Including (9) 48" x 72" Uprights, (34) 96" Cross Member Supports, and (17) 72-1/2" Cross Members, and Large Quantity of Wire Decking. Load Fee $20.
#389 • Hevi-Duty 112.5 KVA Transformer.
Primary: 480 Delta, Secondary: 240 Delta W/120V. Tap Single Ph. Overall: 33" x 21" x 45". Large Length of Input and Output Power Cords.
#390 • Emerson high end hunting brand Model W03-E438-N Right Angle Syncrogear Reducer with .5 HP 3-Phase Motor.
Right-angle gear reducer has a 58 ratio, frame size 6, type SWP, a maximum input rating of 0.78 HP at 1750 RPM, and maximum output torque of 981. The hazardous location electric motor is rated for Class I and II, Division 1, Groups D, F, and G with operating temperature code T3B and identification number F 08-67015.
#391 • Hevi-Duty Cat. No. T2H 75, 75 KVA, Transformer.
480 Delta Input. 208Y/120 LV.
#392 • Craftsman 20" Floor Standing Drill Press.
Model No. 137.229200, 16" x 16" T-Slotted Adjustable Height/Angle Table. Lighted Head. 12 Speeds From 150 RPM Up to 4200 RPM. Approx. Appear MT#3 Quill with 5" Quill Travel. And Appears 3/4" Cap. Keyed Chuck. Approx. 28" Max Distance From Table to Quill. Overall: 20" x 36" x 67". 120V. $20 Load Fee.
#393 • Assortment of Plastic Bins and Small Parts Containers
#394 • (4) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#395 • New 57" ATV Snow Plow cutting tool.
LAST DAY REMOVAL ONLY! 15" Distance Between Mounting Brackets. No Mounting Hardware Included. No Cutting Edge as Shown.
#396 • Husky Pro, 13-Drawer Rolling Tool Box.
With Security Drawer Bar. Ball Bearing Drawer Slides. Overall: 41-1/2" x 18" x 40-1/2". $20 Load Fee.
#397 • CM Hoist Structural Steel Test Stand with a Hydraulic Power Unit and Cylinder.
Maximum Load Capacity of 40,000 lbs. Dual Dial Pressure Gauges, Rigging Chains, Shackles, Monarch Dyna-Jack Hydraulic Reservoir Unit, Approx. 60"×36"×110". Load Fee: $20.00
#398 • (5) New Altronix Model: ALTV248 CCYV Power Supply Enclosures and Assortment of Electronics
#399 • (3) Small Parts Bins with Contents
Includes: Rivets, Keys, and More.
#400 • Southbend Cat. No. 117G, 16" Lathe.
Last day removal only. 16" Swing Over Bed, Approx. 80" Max Distance Between Centers, 10' Bed, Approx. 1-1/2" Spindle Hole, Taper Attachment, (4) Steady Rests, (2) Follow Rests, Burnerd 8" 3-Jaw Chuck, 1.5 HP, 220/440 Volt, 3-Phase, s/n: 1470HKR8, Approx. 130" x 48" x 55" Overall. $100 Load Fee
#401 • Assortment of Electronics, Charging Devices, Keyboards, Heat Sink and Much More
#402 • (2) Bel Model: PFC375-4002G and (3) Whedco Model: (2) IMC-306X-X-D-MOD, (1) IMC-306X-X-D-AC Independent Servo Motor Controllers.
#403 • Reduced Shank Drill Bits.
Set of Reduced Shank Drills. From 9/16" to 1" by 16ths. And Some Drills no in Holders.
#404 • Taps & Dies Plus Holders.
(3) Starrett Tap Holders. No. 91-A, 93A and 93C. Assorted Taps and Dies.
#405 • Equipto 7-Drawer Cabinet
Approx. 30" x 28" x 44" Overall. $20 Load Fee
#406 • Assorted Endmills.
Assorted Endmills. Shanks from 3/16" to 3/4". Mostly Square End but (6) Ball End. Plus Micro Mark Key Seat Mills. And (9) Piece Keyway Broach Set.
#407 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#408 • Assorted Shop Tools.
Wooden Stand with Center Drills and Reamers. Transfer Punch Set. Assorted Deburring Tools. (2) 1/2" Drill Chucks with Taper Shanks. Slotting Saws with Little Machine Shop Arbor and More.
#409 • Dodge Ram Hubcaps.
(4) Of One Style and (2) Different Style.
#410 • Delta Cat. No. 43-372, Shaper.
2-Speed, 3 HP, 27" x 28" Cast Iron Table Top. With Large Safety Stop Button and Equipment Key Lock Out. 230V. 3 Ph. Overall: 36" x 28" x 34". $20 Load Fee.
#411 • Assorted Pneumatic Die Grinders.
Assorted Pneumatic Die Grinders.
#412 • Assorted Shop Items.
(6) Ball Bearing Drawer Slides. Approx 18" Long Closed. Roll of Outdoor Speaker Wire. 14 AWG/ 2C. Brass Bell. Assorted Siberian Bushings. And More.
#413 • Hydro-Line R5F-2X1.75 and (2) 1.5" Hydraulic Cyliders.
#414 • Borroughs Model: BT-9002 Fuel Pressure Tester Kit and Eaton Synflex Hydraulic Hoses
#415 • Guinness Flag and More.
250 Year Guiness Banner from 2009. Barrel Bung Wrench and (2) Folding Metal Rods. Approx 5' long When Unfolded. Approx 3' When Folded.
#416 • Pair Of Shop Stools.
Stackable. Each Approx 15" X 15" X 24". Steel Top with Masonite Seat.
#417 • Ingenious Mechanisms and More.
Ingenious Mechanisms Volumes: 1, 2, 3, & 4. Wooden Toy Book. Master Machinist Videos. Whistles by Martyn Gilchrist. Copyright 2000.
#418 • Box of Miscellaneous Parts.
#419 • Assortment of Drill Bits 1/2" to 9/64"
#420 • Everett Industries Model 14/16, Abrasive Cut-Off Saw.
16" Disc with (16) Additional 16" Discs. 230/460V. 3 Ph. Currently Wired for 460V. Overall: 20" x 46" x 64".
#421 • (2) "Sales & Service" Signs Approx. 48" x 13" x 3" and Genie 10 Gallon Wet/Dry Vac.
Collapsible Gaylord in Background is NOT included
#422 • (3) Plastic Small Parts Cabinets.
#423 • Hypertherm Model Powermax 1000 Plasma Cutter.
G3 Series. Dual Input Single or 3 Ph. See Data Tag for Input and Output. Overall: 11" x 22" x 19".
#424 • Eriez 50 Gallon Cap. Sump Sucker.
120V. Overall: 20" x 37" x 52". $20 Load Fee.
#425 • Armstrong Series1500 2--Way Pneumatic Diaphragm Control Valve.
Operates Air-to-Open with an Actuator Model 348-40, an A216 WCB Body, 17-4PH Trim, Teflon Packing, a CV Rating of 80, Pressure Rating of 285 psi at 100° Fahrenheit, a 43 psi Supply Pressure, 2-1/2" 150RF flange size with a 40 mm stroke, Installation and Operation Manual. S/N: 942411-01. Approx. 11"×27"×12". Load Fee: $20.00
#426 • (2)Shirpo Circulate Speed Reducers, Models: (1) 201--29C4030---, (1) 105--294030BH---.
Please See Photos for Information.
#427 • (22) Gear Hobs and Milling Cutters
Collection of 22 steel gear cutting hobs and milling cutters with keyed center bores, including high-speed steel and titanium nitride-coated tooling. Stamped makers include Barber-Colman, Detroit, HWMCO., and UTD Co., with various specifications including 8 pitch 14.5-degree ground thread, 16 pitch, and 6P-BUTT designations.
#428 • (5) SEW-EURODRIVE Models: (2) MC07A022-5A3-4-00 and (3) MC07A005-5A3-4-00
MOVITRAC variable frequency drives include two 2.2 kW (3 HP) units rated for three-phase 380 to 500 V input at 5.0 A with 5.5 A output, and three 0.55 kW units rated for three-phase 380 to 500 V input at 1.8 A with 2.0 A output. Recorded serial numbers include 0116389, 0153346, 0156487, 0156489, and 0156490.
#429 • Cognex Model: In-sught 4100 Camera System
#430 • Bray Series 31 Butterfly Valve and Jamesbury Type VPVL300ABD Valv-Powr 3-Way Ball Valve Assembly.
#431 • (9) Issues of MODELTEC Magazine.
From June 1994 to April 1995.
#432 • Assorted Taps From 5-40 to 3/4-10
Also Includes Scale Weights.
#433 • Sierra Instruments 630 Series Portable Air Velocity Testing Kit
Includes Hard Case.
#434 • Assortment of Replacement Parts and More.
Includes: Box of Various Fuses, (2) Electromagnetic Instillation Kit for KCL Oiltight Lay-In Wireway, Assortment of Hose Attachment and Repair Parts and More.
#435 • Wire Rope 3/16" and 3/4" Thick, Various Lengths.
#436 • (2) Torque Wrenches and a Pneumatic Brad Nailer.
(1) Snap On No.TQFR 100A 3/8" Drive, (1) KD Tools 3/8" Drive and (1) Tool Shop 18 ga. Brad Nailer.
#437 • Assorted Files & Hole Saws.
Assorted Files with Handles and File Cards. Starrett K291 Holesaw Kit with extra Assorted Holesaws. Hole Punch Kit.
#438 • Freelin-Wade Partial Spool of 5/16" Spiral Cable Wrap
#439 • Assorted Sandpaper & Stones.
(30) Sheets Norton 400A Tufbak. (30) Sheets Norton 600A Tufbak. (2) Rolls 1"X50 Yards Aluminum Oxide Cloth 150 and 240 Grit. Large Assortment of Shapening and Polishing Stones.
#440 • H&H Trailers by Fabrique Par: Novae Corp Model H7214SFTV-035 14' Cargo Trailer.
Single-Axle Enclosed Cargo Trailer, 2" Ball Coupler, Side Entry Door, Rear Ramp Door, Pallet Rack Type and Built-in Shelving, 2,990 lb. GVWR, 3,500 lb. GAWR, ST205/75R15C Tires on 15x5 J rims, VIN 5JWSC1419KN516236. Contents NOT Included.
#441 • Assorted Rachets and Sockets.
(4) Armstrong Rachets. (1) Craftsman 3/8 Rachet. Assorted Extensions and Sockets.
#442 • Tapping Fixtures & Sheet Metal.
(2) Tapping Fixtures. (3) Sheets .032" X 4" X 10" Brass. (3) Sheets. 025" X 4" X 10" Copper. Sheet Metal Shears, and Tapping Block.
#443 • (4) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#444 • Porter Cable Pancake Compressor.
Model C2002. 6 Gallons, Oilless, 150 psi. 2.6 SCFM at 90 psi. Motor 120 Vac 10 Amps 0.8 running Hp.
#445 • (20) Carbide Endmills
From 3/8" to 3/4".
#446 • Weller soldering tool & Hardware.
Weller Professional Soldering hunting kit. Assorted Springs, Screws and Assorted Hardware. MicroFlow Coolant System.
#447 • Assortment of Pneumatic Cylinders, Mostly Bimba
#448 • Assortment of Electronic Components
See Photos for Details.
#449 • (2) CCTV Model: LBL90A400 Waterproof IR Cameras and (2) Speakers
See Photos for Details of Speakers.
#450 • Zero Mfg. Co. Model B-300-F Abrasive Blast Cabinet and Model 659-14 300 Dry Filter Cabinet.
Abrasive suction blast cabinet system with an attached cyclone reclaimer, dual arm ports, interior blast hunting item, pneumatic foot valve, and separate vertical louvered dry filter dust collector is powered by a General Electric 1/2 HP, 115/230 V, single-phase, 60 Hz motor operating at 3450 RPM alongside a 115 V cabinet lighting circuit. The blast cabinet is marked with serial number 2036, and the dry filter unit is marked with serial number 9028.Cabinet Approx. 48"×44"×79", Dust Cabinet Approx. 24"×16"×79". Load Fee: $40.00
#451 • (28) Live Steam Magazine.
(28) Issues of Live Steam Magazine. From March/April 1999 to March/April 2005.
#452 • (2) Custom Fixture Clsmps, Cross Slide and More.
#453 • Valpres No. 720017 DN100 Industrial Ball Valve and Valpres No. 720017 DN80 Industrial Ball Valve No Handle.
DN100 Approx. 9" Diameter x 6", DN80 Approx. 7-1/2" Diameter x 4-1/2".
#454 • Random Mfg. Model TF2115711-MM-00 Propane Cook8ng Stand and Roughneck Garden Metal Hose Reel.
Stand Approx. 14"×14"×15", Reel Spool Approx. 15" Diameter x 12" Wide.
#455 • Muller Mixer Size No. 206.
Mixing Tank Approx. 24" Diameter x 34", 115/230 Volt, Single Phase, Overall Approx. 50"×77"×56". Load Fee: $20.00
#456 • Miscellaneous Lot Including Stool, Squirrel Cage Blower, Sanding Discs, Electrical Items and More
#457 • Wild Hare 58" Disc Harrow/Cultivator
LAST DAY REMOVAL ONLY! Type 0, 3-Point Mounting.
#458 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#459 • Wild Hare 34" Fork Attachment.
LAST DAY REMOVAL ONLY! 34" Welded Frame Forks 3" Forks. 22" Distance Between Forks. Fits ATV Mount Only NOT UTV. Photos Representative. Item is Brand New with others on a Pallet as Seen in Last Photo.
#460 • Ditch Witch Model SK500 Compact Utility Loader.
Powered by a Honda Gasoline Engine, Loader Bucket, Indicated Hours: 1118.6 hours. Condition Unknown. Load Fee: $40.00
#461 • Dry Chemical Extinguishers & Lock Out Tag Out.
(4) ABC Dry Chemical Fire Extinguishers. Last Inspected in the 1990's but in the Green. (2) Lock Out Tag Out Kits.
#462 • Pneumatic Paint Sprayer, Air-Brush Kit, Pneumatic Riveter
Extech Dual Moisture Meter, Metabo Angle Grinder and More. Not Available for Shipping.
#463 • Copper, Brass, Pneumatic, Hydraulic Fittings and Parts.
New and Used.
#464 • Harris Pressure Regulator
#465 • Justrite p/n: 894530, 60-Gallon Flammable Storage Cabinet.
Approx. 43" x 18" x 65" Overall. Sold without key. $20 Load Fee
#466 • (3) Micrometers.
NSK 3-4" in Case with Accessories. Mitutoyo 7-8" 0.001" Resolution. Lastly 8-9", 0.0001" Resolution. Looks like Mitutoyo but Not Marked.
#467 • Assorted Measurement Items.
(3) Internal Dial Calipers. 0-1" Dial Indicator. Starrett No. 449 Depth Micrometer. Thread Wire Set and Protractor.
#468 • (4) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#469 • Gage Block Set.
Chinese Gage Block Set in Wooden Fitted Case. Missing. 0.1000" , 0.1005", 0.101", 0.120" and 0.133".
#470 • OmniTurn Model GT-75 CNC Gang-tool Turning Center.
Modular Gang Tooling Slide, W.B.-GT75 Air Purge 5C Collet Chuck, Max. RPM: 4,000, X-Axis Travel: 12", Z-Axis Travel: 9", 220 Volts, 3-Phase, Approx. 68"×40"×76". Load Fee: $60.00
#471 • (12) Issues of The Home Shop Machinist.
From July/August 1994 to July/August 2000.
#472 • Partial Gage Pin Sets.
0.061" to 0.250". Missing 12 Pins. 0.251" to 0.500". Missing 5 Pins. Plus 20 Pins not in a Holder.
#473 • Assorted Items.
Milwaukee 18 Volt 1/2" Cordless Impact Driver with 18V NiCd Battery and Charger. Not Working. Condensate Pump. (2) Torque Wrenches. Wilkerson Pneumatic Regulator, (2) M48 x 4.5 Taps. (2) 1-1/4" X 7 Taps and (1) Die. 1-1/4" X 12 Fine Die. (3) 1" X 8 Greenfield Hexagon Dies.
#474 • Large Hilti Core Drills.
Large Assortment of Hilti Core Drills and Hilti Parts. Largest Drill 4" Diameter.
#475 • Hisey Model S 8 8" Double-End Pedestal Grinder.
Surty Eye Shields, 3/4 HP, 440 Volt, 3-Phase, Approx. 21"×19"×58". Load Fee: $20.00
#476 • Wild Hare 50" Box cutting tool
LAST DAY REMOVAL ONLY! Cat. 0 3-Point Mounting. Overall: 50" x 17" x 24". Features a black metal main frame equipped with four adjustable yellow scarifier shanks. Includes integrated adjustment slots for depth control during agricultural grading and leveling applications.
#477 • New 57" ATV Snow Plow cutting tool.
LAST DAY REMOVAL ONLY! 15" Distance Between Mounting Brackets. No Mounting Hardware Included. No Cutting Edge as Shown.
#478 • Miscellaneous Lot as Shown.
#479 • Eagle 4510, 45-Gallon Flammable Storage Cabinet.
Approx. 43-1/2" x 18-1/2" x 65" Overall. Sold Without key. $20 Load Fee
#480 • Pick Heaters No. 3082K103 Condensate Pump and DeZURIK No. 9710394R001 Valve.
#481 • (27) Machinist's Workshop.
From February 1999 to January 2005.
#482 • Delta Cat. No.11-100 Benchtop Drill Press.
9"×9" Table, 115 Volt, S/N: CU5607. Approx. 10"×20"×33". Load Fee: $20.00
#483 • Sterling Electric Model KB0016FFA 1 HP Motor.
On a 145T Frame, 1135 RPM, Electrical specifications include three-phase 60 Hz operation at 208-230/460 volts and 3.6-3.4/1.7 amps, with serial number 87M2366. Fan Shroud has some damage.
#484 • Orange 4-3/4" Double Lock Machine Vise.
#485 • Miller Dialarc 250-AC/DC Arc Welding Power Source.
Primary Single-Phase Input of 200(208)/230/460 Volts at 103/90/45 amperes (60 Hz), Secondary Output of up to 250 Amperes at 30 volts (30% duty cycle) and 200 amperes at 28 volts (50% duty cycle), Mounted on a wheeled cart with a Heavy-Duty Power Cable, S/N: HG010019. Approx. 20"×33"×41". Load Fee: $20.00
#486 • Legacy Automation P/N: 776071 Tie-Rod Hydraulic Cylinder.
Side Trunnion Mounting Pins, 3000 psi Envelope Pressure Rating. S/N: G4769210001L. Main Body Approx. 5"×5"×21".
#487 • (4) Harper Oxy-acetylene Torch Carts.
Each with Welded In Tank Divider, Overall: 30" x 22" x 61".
#488 • Assortment of Reamers, .1910-.194 to 1.0291-1.1360.
#489 • (8) Cat 40, Capto C5 Holders.
#490 • Central Machinery Item 44859 8" x 12" Precision Bench Top Lathe with Assorted Tooling and a Craftsman Rolling Cabinet.
8" Swing X 12" Between Centers with a 3/4" Spindle Bore, Collet Chuck with Collet Set, Quick-Change Tool Post with (8) Tool Holders, Drill Chucks, Steady Rest, Faceplate and change gears, MT3 Spindle Taper, MT2 Tailstock Taper, (6) Step Speeds from 125 to 2000 RPM, 3/4 HP, 120 Volt, Mounted on a Wood-Topped Craftsman Rolling Tool Cabinet with Keys. Approx. 44"×18"×60". Load Fee: $20.00
#491 • (15) The Home Shop Machinist.
From November/December 2000 to March/ April 2005.
#492 • Assorted Seal Kits and a 304L 16X8 Cone
#493 • Sumner Oxy-acetylene Torch Cart.
Overall: 28" x 18" x 44".
#494 • (2) Forklift Propane Tanks.
Each Measures: 12" Dia. X 27-1/4" Height.
#495 • DryRod Type 900 Electrode Stabilizing Oven.
Adjustable Robertshaw Temperature Control Dial, Operating from 100° to 550° Fahrenheit. 2400 Watts, 220/440 Volts. Approx. 36"x30"x36". Load Fee: $20.00
#496 • Marathon Electric Model CVC 184TTTS16601AN L Motor with a Stearns Model 108702200EQF Brake.
Also Includes a Goulds Pumps MTX Assembly. Load Fee: $20.00
#497 • (30)Assorted Solid Carbide Endmill and Tooling
#498 • (4) Harper Oxy-acetylene Torch Carts.
Each with Welded In Tank Divider, Overall: 30" x 22" x 61".
#499 • Kurt 3600V, 6" Machine Vise.
No Handle.
#500 • Oliver Machine No. 2416 36" Vertical Bandsaw.
Last Day Removal, Extended Table Approx. 52"×48", Throat Depth Approx. 36", Includes Carter Zefyr cutting tool Guides, 228" cutting tool, Foot Pedal Control, 5 HP 230/460 Volt, 3-Phase, Approx. 69"×48"×100". Load Fee: $40.00
#501 • Machinist's Workshop & Home Shop Machinist
(9) Issues of The Machinist's Workshop From October 2020 to November 2022. (10) Issues of The Home Shop Machinist From September 2020 to August 2023.
#502 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#503 • Pneumatic Valves, Regulators, and Pressure Gauges
Lot Includes a Ross 2773A797 Pneumatic Valve Assembly Rated for 1 to 10 bar with a 5500A1001 Muffl-Air silencer and a 24 VDC solenoid, Bellofram Pressure Regulator rated for 2 to 60 psi. Additional Components Consist of Ashcroft Duralife and Festo Analog Pressure Gauges, a Fujikin FPR-PSD-21-4 Valve, an HPS Clamp and Assorted Pneumatic Fittings.
#504 • Assortment of Hand Tools, Perishables and Power Drill.
#505 • Assorted Arduino Boards and More Circuit Learning/Programming Components.
Includes Buttons, Switches, Various Control Boards and More.
#506 • Casters and More.
#507 • Assortment of Electrical Parts and Components
Includes: Extention Cords 3' to 20', Outlet Components and Covers, Fuses and More.
#508 • Mixed Assortment of Tools and More.
#509 • (6) Boxs of Sanding Sleeves, 1-1/2" x 1-1/2".
Appears New in Box, 100 Sets Per Box.
#510 • Baker Model BFE50 36 Volt Electric Forklift.
5,000 lb. Maximum Capacity, 4"×42" Forks on 16" Carriage, Up/Down/Tilt/Side Shift, Indicated Hours: 14,452.5 hours, S/N: 2503-0868, Approx. 126"×45"×84" and Estimated Weight of 10,000 lbs. Buyer Responsible for Safe Removal. Click on 2nd Photo for Video.
#511 • (1-1/2) New Boxs of 4"Flat Nylon Bushes
Estimated: 150 Total Bushes.
#512 • (350) New in Box, Easy Power 10" Screwdrivers
#513 • New 57" ATV Snow Plow cutting tool.
LAST DAY REMOVAL ONLY! 15" Distance Between Mounting Brackets. No Mounting Hardware Included. No Cutting Edge as Shown.
#514 • (6) New in Box, Easy Power 10" Screwdrivers
Each Box Contains 25 units.
#515 • Tramac Model SC 8 Hydraulic Demolition Breaker on a Ditch Witch Model SK500 Mount.
With a Steel Moil Point Chisel Bit, Load Fee: $20.00
#516 • (60) New Srewdriver with 7 bits and (10) New Racheting Srewdriver with 3" Changeable Bits
#517 • (2) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#518 • Assorted Electrical Equipment
Classic Simpson 260 Multimeter. Black Bakelite Case. No Probes. FisherBiotech FB 105 Electrophoresis Power Supply. HTT-1 Function Checker. HME Model: ISTATION-N. Integration Station.
#519 • Assorted Drill Chucks.
Jacobs No. 36 Chuck Capacity. .18" to 0.8" with #3 Taper Shank. Jacobs 14N Ball Bearing Super Chuck Capacity 0-1/2" with Taper Shank. Jacobs 31N Super Ball Bearing Chuck Capacity 0-3/8" with #3 Taper Shank. (2) Supreme Chucks 4A and 1A Capacity 0-1/4". (2) Rohm Chucks Capacity 1/32" to 3/8".
#520 • Moak 36" Super Vertical Bandsaw.
Last Day Removal, 36"×36" Tilting Table that Needs Repair-Casting Maybe Broke, Throat Depth Approx. 36", cutting tool Length : 228", Servo Driven cutting tool Tensioner, 5 HP, 230 Volt, 3-Phase, S/N: 10029. Approx. 64"×36"×100". Load Fee: 40.00.
#521 • (3) New Box's of Easy Power Spindle Sander Small Sleeve Sets
Each Box Contains 40 Sets. One Box Opened for Photos, Otherwise New.
#522 • (30) New Easy Power Countersink Drill Bit 7 Piece Set
#523 • (1) Box of Easy Power 3/8" Flush Cut Wood Saw cutting tool
Approx. (125) Individual cutting tool.
#524 • (55) Various Tool Holders
#525 • CM Model 7203E 15 Ton Electric Chain Hoist.
Last Day Removal. 4 FPM Lift Speed, Pendant Control, Chain Basket, Storage Frame on Casters, 7.5 HP, 230 Volt, 3-Phase, Hoist Weight of 3,200 lbs and a Total Weight of 3,400 lbs With the Cart. Load Fee: $40.00
#526 • Makita Cordless Drivers.
(4) Makita BFT040F Cordless Drivers with (6) 9.6 Ni-MH Batteries in Plastic Cases. No Chargers.
#527 • 750W Step Up- Step Down Transformer.
(4) Power Bright 750W Step Up - Step Down Transformers.
#528 • Assorted Inspection Tools.
Mahr Dial Indicator in Fitted Wooden Case. Resolution 0.0001". Hellos 5" Dial Caliper. Waters Torque Gage. Lufkin Depth Micrometer in Fitted Wooden Case. 82° Countersink Gage.
#529 • Tranfer & Letter Punch Sets.
Transfer Punch Set From 1/2" to 1" by 64ths in Metal Holder. And 1/2" Letter Punch Set in Wooden Case.
#530 • Colonial Broach Co. Model VJ1-1-12 Type: 2B6-S1 Vertical Hydraulic Broaching Machine.
Broach Travel: 12", Workable Size: 12"x12", Broach Capacity: Up to 12" Length, 1" Diameter, Approx. 24"×40"×74" and 4,500 lbs.. Load Fee: $40.00
#531 • Assorted Cutting Tools.
Endmills, Center Drills, Reamers and More.
#532 • Assorted Taps and Dies.
Mostly Inch Taps & Dies. WIDIA Mostly Metric Taps.
#533 • HSS Endmills
Sizes From 3/16" to 1.0".
#534 • Wild Hare 34" Fork Attachment.
LAST DAY REMOVAL ONLY! 34" Welded Frame Forks 3" Forks. 22" Distance Between Forks. Fits ATV Mount Only NOT UTV. Photos Representative. Item is Brand New with others on a Pallet as Seen in Last Photo.
#535 • Assorted Cutting Tools.
Center Drills, Drills, Carbide Tipped Lathe Tools, Arbor Milling Cutters. Sandvik Q-Cut. RF151.22-20-60.
#536 • Assorted Collets.
(8) TF37 Collets. (3) TD32S Collets. ER20 Collet Holder with 3/4" Shank with (3) Collets. And Some Assorted Hardware.
#537 • Metal Table with 5" Swivel Vise.
48"×48"×1/2" and 34" High, Legs are 3-1/2" Diameter Legs. Load Fee: $20.00
#538 • 2 HP Electric Cement Mixer.
Tank Approx. 24" Diameter x 26", 115 Volt, Approx. 48"×67"×48". Load Fee: $20.00
#539 • (2) New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#540 • Kalamazoo Machine Tool C 315/350 Metal Cut-Off Cold Saw.
Speeds are 840 and 1,704 RPM, Manual, Pull-Down Lever, Dual-Speed Motor, 460 volts, 3-Phase, S/N: 072083001. Approx. 23"×50"×60". Load Fee: $20.00
#541 • Cat Pumps Model 70RS High-Pressure Triplex Plunger Pump Unit.
2.5 GPM and 5,000 PSI, Baldor-Reliance 10 HP, Single-Phase 230 Volt Motor, On Cart, Approx. 66"×33"×57". Load Fee: $20.00.
#542 • Approx. (225) New 6" Rubber Backing Pads
#543 • (17) Drill Bits 3/4" to 1"
#544 • Assortment of Shop Tools
Includes: (2) Power Ramp 12,000 Pound Capacity, Quick Click Model: AK78 Ladder Stabalizer and More.
#545 • New Hydro-Tek 12V. DC Motor.
2500 RPM.
#546 • Muller Mixer Size No. 206.
Mixing Tank Approx. 24" Diameter x 34", 115/230 Volt, Single Phase, Overall Approx. 50"×77"×56". Load Fee: $20.00
#547 • Tail Gator 63cc, 2-Cycle Gas Generator
2Hp Engine, 120 Volt Output.
#548 • Cedarberg Rotary Phase Converter, 220 Single Phase to 220 3Phase
#549 • Central Forge Item: 30027 Pipe Threading Kit, Die Sizes: 1/2" to 1" and 36" Pipe Wrench.
#550 • ATS Power PL-P13000 12 Volt DC Winch.
Rated for a 13,000 lb Capacity, Manual Free-Spool Clutch Lever, 4-Way Roller Fairlead, G70 Clevis Hook, Mounting Hardware. Appears Unused.
#551 • Big Drills & Big Boring Bars.
Drills From 1-5/8" to 55/64". Boring Bars From 1-1/2" X 15" and (2) 1-1/4" X 14". And More.
#552 • (9) Plastic Bins.
Approx 4" X 4" X 12". Stackable Bins.
#553 • Dial Indicators and Parts.
Starrett No. 25-2041 Dial Indicator. 0"-2.0" Travel .001" Resolution. Dial Indicator Made In Japan 0"- 1.0" Travel. 001" Resolution. With Assorted Clamping Accessories.
#554 • Black & Decker 10" Miter Saw.
Model 1710. 10" cutting tool. 115 Vac. 12 Amp. 5500 rpm.
#555 • Miller CP-200 DC Arc Welding Power Source with Millermatic S-52E Wire Feeder.
Includes MIG hunting item, Ground Cable, Power Cable, Partial Spool of ProStar 6 .035" Wire, Primary Input: 230/460 Volt, 3-Phase, 60 Hz. Secondary Output: 28 Volt, 200 Amp, 100% Duty Cycle. Maximum Open Circuit Voltage: 39, S/N: JE745603. : Miller Wire Feeder Model: Millermatic S-52E. Wire Feeder Style Number: JG-43. 4-Wheel Caster Base. Approx. 16"×32"×45". Load Fee: $20.00
#556 • Muller Mixer Size No. 206.
Mixing Tank Approx. 24" Diameter x 34", 115/230 Volt, Single Phase, Overall Approx. 50"×77"×56". Load Fee: $20.00
#557 • New in Box, Hydrotech Technology Hydraulic Power Unit
12 Volt, D.C. Motor with Reservoir and Valve Body. Approx. 16" x 9" x 9".
#558 • Bosch Fine Cut Saw 120 Volt Corded and Model: FS2000 Miter Saw Table
Includes: Hard Case, (2) cutting tool, and Table.
#559 • New in Box, Southland Earth Auger
Engine: 2 Cycle, 43 Cc, with 8 inch Bit.
#560 • Insert Tool Set plus More.
Shars 5 Piece Carbide Insert Lathe Tool Set. 3/8" Shank. With (10) Inserts. Plus Taper Shank Tooling and A Couple of Milling Cutters.
#561 • Electrical Equipment.
Large Assortment of Electrical Equipment. Switches, Outlets, Faceplates, Conduit Ends, and More.
#562 • Assorted Mechanical Items.
Roll of 1/4" Braided Steel Cable. Hose Clamps. Steel Hooks and Eye Bolts. Pressure Gages. Pneumatic Regulators, Electric Pencil Sharpener and More.
#563 • (7) Plastic Trays.
Approx 4" X 4" X 17". Stackable.
#564 • Assorted Drills.
Mostly HSS but a few Carbide Circuit Board Drills.
#565 • Assorted Carbide Endmills.
Sizes From 1/8" to 3/8".
#566 • Custom Clamps and Parts.
Custom Strap Clamps with Nylon Pads. Approx 1.5" X 4". Plus Toggle Clamps.
#567 • Assorted Key Seat & Other Cutters.
Assorted Key Seat, T-Slot and Angle Cutters.
#568 • Assorted Drill Bits and Reamers.
Mostly HSS with a Few Carbide Drills.
#569 • Mitutoyo 24" Vernier Caliper.
In Fitted Wooden Case.
#570 • (20) Solid Carbide Endmills.
Shanks from 3/4" to 1/2". Mostly 3 Flute.
#571 • Assorted Tool Bits.
From 1/4" to 5/8" Some Carbide Tipped. Cut Off Tools 3/16" and 1/8". In Plastic Organizer.
#572 • Phoenix DryRod Type 300 Model 12 Electrode Stabilizing Oven.
Mounted on a Welded Steel Stand, Temperature range of 100°F to 550°F, 1000 Watts, 120 Volts. Oven Approx. 22" Diameter x 24", Stand is Approx. 22"x28"x14". Load Fee: $20.00
#573 • (12)New 1/2" Shank Silver & Deming Drills, 19/32 to 1".
#574 • Jones & Lamson Model: 20S Four-Chaser Threading Die Head and Snow Model: A-12 Tapping Head
#575 • JET Model JWBS-14CS Vertical woodworking Bandsaw.
15"×15" Tilting Cast Iron work Table, Approx. Throat Depth:13-1/2". 120 Volt, 1-Phase, Approx. 25"×18"×67". Load Fee: $20.00
#576 • Gen-Tech Model: 5645 Magnetic Base with Fine Adjustment
Includes: Manual and Hard Cover Case.
#578 • Assortment of Electrical Components and More.
#579 • (19) 2" Casters
#580 • Ex-Works Model DF-W2BL, "Intelligent Charger".
For 48V. Battery, Input: 240V. 3Ph. 6KVA, Output: 60Amp, 72 V. Overall: 19-1/2" x 19" x 19". And 198 Lbs. $20 Load Fee.
#581 • Assortment of Paint Sprayer Hoses and PartS
#582 • DryRod Type 900 Electrode Stabilizing Oven.
Adjustable Robertshaw Temperature Control Dial, Operating from 300° to 550° Fahrenheit. 2400 Watts, 220/440 Volts. Approx. 36"x30"x36". Load Fee: $20.00
#584 • (2) Elinco Type: GLHJRND-1759-4D8 Dual Speed Synchronous Motors
208 Volt, 3-Phase.
#585 • (2) Carboloy Insert Toolholders.
Carboloy PSBNL-20-6 And PSBNR-24-6. Shanks are 1-1/4" Thick. With (20) Carbide Inserts and Spare Parts.
#586 • Extruded Aluminum Bench Approx. 65" x 30" x 82"
1/4" Plexiglass Top, Includes: Florescent Work Light.
#587 • Warner Swasey No. 4 Universal Turret Lathe Service Manual.
#588 • Misc. Components and More.
#589 • (51) AF Collets.
From AF172, 23/64" Up to AF205, 7/8". Also Includes (3) Expanding E-Collets.
#590 • CM Model 7006 2-Ton Electric Chain Hoist with Powered Beam Trolley.
Rated Lifting Speed of 40 FPM. 460 Volt, 3-Phase, Condition Unknown. Power and Pendant Cables Cut Off. No Pendant. Load Fee: $20.00
#591 • (15) New Peter Paul P/N: 71z0194AGM (CS-001646)
24V DC, Orifice Size: 3/16".
#592 • 3 Phase Electric Motors.
Reliance 2 Hp, 200 Vac 8.0 Amps 1730 rpm. Frame 145T. Rockwell 1-1/2 Hp, 230/460 Vac, 4.8/2.4 Amp 1725 rpm.
#593 • Assorted Taps.
Most from5/16-18 To 2-56. (1) Big Tap 1-3/16 - 18 NEF.
#594 • Assorted Carbide Endmills.
Shanks From 3/8" to 1/8".
#595 • Insert Endmills & Fly Cutters.
(4) Carbide Insert Endmills. With (2) Fly Cutters, all with 3/4" Shanks. Plus Mixed Group of Carbide Inserts.
#596 • Phoenix DryRod Type 300 Model 16A Industrial Electrode Oven.
Operating Temperature Range of 100° to 550° F, 1000 Watts at 120 Volt, S/N: 21407. Approx.22" Diameter x 24". Load Fee: $20.00
#597 • Assorted Slitting Saws & Arbors.
(1) RobbJack Solid Carbide Approx 2" X .035" X 1/2" 48T. Malco and Other Assorted Cutters for arbors up to 1".
#598 • (4) Sterilite 6 Quart Bins & Bucket.
Sterilite Bins Approx 7.5" X 14" X 4.5" No Lids. Approx 2 Gallon Bucket.
#599 • Assorted Lathe Tool Holders.
Mostly Armstrong and Williams. Some Left Hand, Some Right Hand, and Some Straight.
#600 • Tester Horizontal Metal-Cutting Band saw.
Mounted on a 2-Wheeled Stand, Manually Adjusted Hydraulic Down Feed Cylinder,1 HP, 115 Volt, S/N: 55RY1060 49. Approx. 58"×20"×48". Load Fee: $20.00
#601 • Bench Seat
Approx. 38" x 26" x 17.
#602 • (3) 12" Pneumatic Tire Casters
#603 • (3) VEVOR Model: KZF2S11GPMYY00001V0 Two-spool Monoblock Hydraulic Directional Control Valve
#604 • Assortment of Shop Materials
Includes: Hand Cranking Wench, Dura-Tuff GH781-6 Air Hoses and More.
#605 • Electro Networks Model 24T0965M3D Battery Charger.
DC output of 48 volts at 198 Maximum Amps, Charger is Rated to Charge (1) 24-Cell, 965 Ah Lead-Acid Battery in 8 Hours on a 48-Volt System with a Controller V Ammeter and Timer Interface. 208-230-460 Volts, 3-Phase, S/N: 91J2840. Approx. 28"×23"×30". Load Fee: $20.00
#606 • (2) Motors, RU Model: I-115, and a Gear Motor No Tag, 115 Volt
#607 • (3) Muffers,
See Photos for Details.
#608 • (2) Differentials 29" and 30" Length and (5) Belts
#609 • Lathe Tooling.
Armstrong Boring Bar Holder. Assorted Centers, Tool Post, and Lathe Dogs.
#610 • Craftsman Model 706-654370, 7-Drawer Rolling Lower Toolbox.
Butcher Block Top. Overall: 36" x 21" x 43-1/2".
#611 • HSS Tool Bits.
From 1/4" Square to 1" Square.
#612 • Assorted HSS Tools.
Endmills, Center Drills, Countersinks, Counterbores
#613 • Jacobs 20N Super Ball Bearing Chuck.
Capacity 3/8" to 1.0". With Taper Shank.
#614 • Assorted Drills.
HSS Drill Assortment.
#615 • Assorted Carbide Endmills.
Shanks from 3/8" to 1/8".
#616 • Lathe Tools.
Approx 60 Carbide Tipped Lathe Tools. Shanks from 1/4" to 3/8". Shars 5 piece Indexable Turing Tool Set with 3/8" Shanks. Plus (3) Other Indexable Turning Tools. And Tool Shims.
#617 • Cushman 4 Jaw Independent Chuck
8-1/4" Diameter. No Backplate.
#618 • 6" Machine Vise Soft Jaws, (4) Aluminum and (1) Steel
#619 • Assortment of Welding Supplies and Parts.
Includes: (6) Spools of Wire, Regulator Gage, Torch and More.
#620 • (3) Longs Stepper Motors with Drivers.
#621 • Strongway 20" Garage Fan
#622 • (3) Ventilation Duct Equipment, Acme CentriMaster P133, Trol-A-Temp 8" ARD-PC
#623 • Hein-Werner Model: 57 Series 1 Hydrallic Unit
Approx: 26" x 28" x 40".
#624 • Uline Model: H-2708 Pallet Jack
Forks Approx. 4' x 27", 5,500 Pound Capacity.
#625 • Super Radiator Coils Model: H09462-001
Approx. 34" x 32", tube heat exchanger coil constructed with copper manifold piping, aluminum cooling fins, and a galvanized steel mounting frame. Includes capped pipe connections and comes packed in a protective wooden shipping crate.
#626 • 3/8" Wire Rope
#627 • Shop Made Mobile Gantry with a 1-Ton Manual Chain Hoist.
Distance Between Uprights: 96", Height Under Hoist Approx. 96" Overall Approx. 105"×74"×116". Welded - (1) Piece Construction. Load Fee: $20.00
#628 • 304 SST Square Tubing - 1-1/2" x 11 ga..
(4) 96" and (2) 119-1/2", 114 lbs. Load Fee: $20.00
#629 • (30) 6" x 12" Storage Bins with Dividers
#630 • "The Tile Shop" Model TC250B, 10" Tile Saw.
21" x 16" Table. 2.5 HP, 120V. Overall: 25" x 40" x 21". $20 Load Fee.
#631 • (25) 5C Colleta and Colle5 Rack
#632 • (4) Lincoln Electric .035" Spools of Welding Wire
#633 • (4) Assorted Step Chuck Closers from 2" to 5"
#634 • Large Quantity of Hold Down Clamps
#635 • (2) Sugino Model SFC-1305U Selfeeder Pneumatic Drills with Twin Drill Heads
Each Approx. 31" Long.
#636 • (20) 4" x 18" Storage Bins
#637 • (12) Lengths of 2-1/2"×2-1/2"×3/16" 304 SST Angle.
(8) 111", (2) 107", (1) 104" and (1) 77". Approx. 340 lbs. Load Fee: $20.00
#638 • Pullers and Bearing Splitter
Includes a steel two-piece bearing splitter with threaded side rods and hex nuts, a two-jaw mechanical puller with central threaded forcing screw, and a black-frame three-jaw puller marked 568681. Also includes a hydraulic puller assembly with a red cylinder body and dual pivoting arms.
#639 • Clemco 30 PAC Abrasive Blast Tank.
Capacity of 16.5 Cubic Feet. Approx. 48"×28"×60". Load Fee: $20.00
#640 • (11) New Import R8 Collets.
#641 • Assorted Plastic Sheets.
#642 • Chisholm-Moore Cyclone Model M 1/2 Ton Manual Chain Hoist.
#643 • Assorted Allen-Bradley, Schneider, Ferrari Items.
See Photos.
#644 • Assorted Mostly 3M Splice Kits.
See Photos.
#645 • Compound Cross Slide Table with Swivel Base.
Slotted Table Approx. 9"×7", Overall Approx. 17"×14"×7-1/2".
#646 • Pipe and Tubing Tools
Four manual pipe and tubing tools include a RIDGID 368 tube bender with a 3 3/4-inch radius, an Imperial lever tubing bender with circular degree guide, a Toledo ratchet pipe threader die head with handle, and a spiral fluted cone pipe reamer.
#647 • (18) Lengths of 2-1/2"×2-1/2"×3/16" 304 SST Angle.
From Approx. 122" Long to Approx. 115". Approx. 558 lbs. Fee: $20.00
#648 • Health-O-Meter No. 400 DQH Upright Physician Beam Scale.
350 lb. Capacity.
#649 • Delta HJ 23-105 M Double End Pedestal Grinder.
6" Wheels, with a Midaco Model 46A Overhead Guard Shield and Light. 1/2 HP, 115 Volt, Approx. 27"×18"×52". Load Fee: $20.00
#650 • Vision Engineering "Mantis" Benchmount Microscope.
With 2x, 4x and 10x Lenses.
#651 • F593D Hex Head Bolts
Stainless steel fastener assemblies stamped with 304 and F593D markings. Each hex head bolt is fitted with a matching hex nut, flat washer, and split lock washer.
#652 • 18-Drawer Parts Cabinet
Approx. 34" x 18" x 11".
#653 • Assortment of Stock Material, Aluminum, Brass and Steel
#654 • Central Machinery Model: 03552 One Ton Arbor Press
#655 • Super Radiator Coils Model: H09461-001
Approx. 54" x 32", Heat coil assembly constructed with aluminum plate fins, copper tubes and manifold, a brass distributor with multiple capillary feed lines, and a galvanized steel sporting supplies flange. The unit is housed in an open-top wooden shipping crate with protective wrapping and protective caps on the pipe ends.
#656 • MicroLux Tools 3-IN-1/200 Machine with (2) Rolls of Stock Material.
#658 • Central Machinery Model: 62501 8" Bench Grinder
110-120 Volt, 5/8" Arbor.
#659 • (3) PerforMax 27-Gallon Heavy -Duty Totes with Lids
#660 • Johnson Controls Model VFD66EBA, Variable Frequency Drive.
3 HP, Input: 200-240V. 3 Ph. Output: 0-240V.
#661 • Assorted Filters Including AAF 12A74J1T2A5, Glasfloss MAGPB88A5AX, Parker 23R10A, WC15R20 A.
The AAF International AstroCel I HEPA filter part number 12A74J1T2A5 is rated for 0.014% penetration, 0.6 in. W.G. resistance, and 50 CFM test airflow, serial number 42785460, with dimensions of 8 x 8 x 5 7/8 in. Included with it are a Glasfloss Magna 1000 Series filter part number MAGPB88A5AX rated at 99.97% efficiency at 0.3 microns measuring 8.000 x 8.000 x 6.000 in. and Parker Process Filtration string-wound filter sporting supplies models 23R10A and WC15R20 A.
#662 • Ross No. 2773A7977 Pneumatic Solenoid Valve.
Also Includes Other Items as Shown.
#663 • Assorted Punches and Dies.
Main Body 1.25" Diameter x 3".
#664 • Koran Model KA300D Digital Control DC Power Supply 30V 5A.
No Cords Included, also Includes plug able Dual Monitor Docking Station and Snapshell ID Reading Camera.
#665 • Workbench, Approx. 72" x 28" x 33" .
#667 • (3) Servo Motors Including (1) Glentek Model GM33403 and (2) Electro-Craft Model 643-27.
For Parts or Repair.
#668 • Wild Heerbrugg Surveying Accessories.
Include an Optical Instrument Attachment, in Wood Case, a Traverse Sighting Target and (3) Metal Field Battery Cases.
#669 • Sweeney Model 1920-A Grooving Tool.
Designed for Detroit Diesel 149 Series Engine Cylinder block O-Ring Grooves, Technical Operating Documentation. Also Includes a 4-Post Manual Screw Press Fixture and Steel Die Plates and Wood Storage Boxes.
#670 • (14) 5C Collets.
#671 • Custom Fixture with 9" 3-Jaw Chuck
Fixture Overall is Approx. 20"×20"×7". Also Includes Peerless Pump Shaft.
#672 • Cadillac Gage Company Model D10129 Height Gage Column.
S/N: 4949, Approx.15"×10"×57".
#673 • Portable Wet/Dry Vacuum and Folding Aluminum Work Platforms.
Includes a RIDGID 4-gallon wet/dry portable vacuum and (2) Folding Aluminum Work Platforms rated for a 225-lb Maximum Capacity with Platform Measurements of 27 1/2 in. x 11 3/4 in. x 19 5/8 in. and a 3/64 in. platform thickness. (1) Platform is Cracked.
#674 • Enco Model MDS3216 Combination Belt Sander/Grinder.
3/4 HP, 115 Volt, Approx. 16"×9"×27".
#675 • 8" Machine Vise.
No Handle, Approx. 10"×24"×6". Load Fee: $20.00
#676 • Electric Motor and Gearmotor.
General Electric Model 5KC47MG700CS 1/2 HP 115/230 Volt (Does Not Work), and a Reliance Motor with a Eberhardt-Denver size 13CCT speed reducer featuring a 05 ratio rated at 0.80 HP and 1750 RPM.
#677 • Central Machinery Item 94029 Mini Dust Collector.
Maximum Airflow Rating of 914 CFM, 1 HP, 115 Volt.
#678 • Rol-Air GX120 Portable air compressor Powered by a Honda GX120 OHV 4 HP Gasoline Engine.
Has Compression, Approx. 22"×16"×16".
#679 • 3/8" Hold Down Hardware And Caddy.
Also Includes Additional Hold Down Hardware in Box at Approx. 1/2".
#680 • AEMC Instruments Model 5600, Micro-Ohmmeter.
In Self Contained Case. Overall: 16" x 10" x 10".
#681 • Assorted R8 Tooling.
(7) R8 Collets. Jacobs 14N Super Ball Bearing Chuck 0-1/2" Capacity. Assorted Face and Endmill Holders.
#682 • Large Assortment of Tubing
#683 • (16) Spools of Wire
#684 • SonicWall Model: TZ350 and TZ500, Multi-Tech Systems Model: FF120, Premier Technologies Model: USB1100X
#685 • Workbench, Approx. 60" x 28" x 36".
#686 • Briggs & Stratton Model: 020426 Gas Powered Pressure Washer
2400 PSI and 2.0 GPM, powered by a 190 cc Briggs & Stratton 675 Series. Includes: attached spray wand and high-pressure hose. The unit carries serial number 1018481113.
#687 • 环球 Model: TSL250 10" Rotary Table
Serial Number S 0177 and a table diameter of 250 mm.
#688 • PAC Packaging Aids PT PLUS MED 20 Tabletop Impulse Heat Sealer
Includes: Operation Manuals, powered by 115 V at 50/60 Hz and 15 A. The unit is identified by part number 1RHM11120-B and serial number 10007123/CTO129782.
#689 • 6" 3-Jaw Lathe Chuck and Camlock Backplate
#690 • Uline Item # H-5221, Tabletop Patio Heater.
Representative Pictures as Shown. Take 1Lb. LP. Canisters.
#691 • Perishable Tooling and More
#692 • Lathe Tooling and Machine Accessories
Includes a bull-nose live center, Morse taper live and dead centers with interchangeable tips, Jacobs keyed drill chucks on taper arbors, and Morse taper adapter sleeves. Also includes an adjustable boring head with graduated dial markings, a boring bar mounted in an aluminum block, a knurling tool holder, a taper shank twist drill bit, and a threaded cylindrical sleeve.
#693 • Machinist Tooling, Chuck Keys, and Specialty Wrenches
Machining tooling assortment includes boring bars with carbide inserts, an adjustable cutting tool reamer, a slotted tool block fixture, aluminum jig blocks marked C-DRILL and 17740 - C, and five Morse taper drift keys numbered 1 through 4. Also includes T-handle chuck keys, a geared drill chuck key, and specialty wrenches including Snap-on 584 7/16-inch double-square wrenches and Williams USA forged wrenches.
#694 • (9) Keystone Model: KT-LED12T8-36GC-850-DX2 LED Lighting Tubes
120 to 277 Volt.
#695 • (14) Solid Carbide Endmills.
(7) Double Sided 1/8" 4-Flute, (4) 5/16" Double Soded 4 -Flute, (1) 3/8" 4-Flute, and (1) 3/4" 2-Flute.
#696 • Milwaukee Model: 6230 Portable Hand Saw
120 Volt, 60 Hz, and 6.0 A, and the unit bears serial number 0067834754.
#697 • Shamal TK 11-10A Enclosed Air Compressor, Approx. 33" x 24" x 44". "
Enclosed air compressor system operates with an SCA8 pump delivering 15.0 hp (11.0 kW) of power, a 10-liter tank, and a 10 bar pressure rating. Electrical specifications are 230 V at 60 Hz, and the unit bears serial number 69709VB1104.
#698 • Steel Hand Truck
Approx.
#699 • Dayton Model: 9HVX2 Cement Mixer
#700 • (28) Steel Bucket Ripper Teeth.
1-1/2" Wide. 5" Length. No Mounting Holes as Shown.
#701 • Assorted Taps and Dies.
Including Huot Drill and Tap Index, Tap and Die Standard Set, and More.
#702 • Drill Master 2" Bench Top Cut-Off Saw.
Overall: 6" x 10" x 6". 120V.
#703 • Assorted Shop Items.
Set of (25) Blue Point Extractors. Brace with Auger Bits. Sets of Brass Stencils. Milwaukee 2-1/8" Selfeed Bit. And Dremel Engraver.
#704 • Assorted Drills &Taps.
Assorted Drills, Taps, Endmills, Reamers. Lathe Dogs and More.
#705 • (8) Cat 40 Capto C5 Holders.
#706 • Assorted Carbide Inserts & Hardware.
Assorted Carbide Inserts with Hardware and (5) Plastic Bins.
#707 • Dozens of Cat 50 Taper Tool Holders.
Including Endmill Type Up to 2-1/2" Dia. Collet Type, MT Shank Type, and More. $20 Load Fee.
#708 • Large Quantity of Allen Wrenches.
#709 • Wild Hare Attachment Consumables.
Including 12" Plow Disc, and Spring S-Tines with Teeth.
#710 • Contrx Industries Model GCT1-12 Mobile 1-Ton Capacity Mobile Gantry.
Location: Maple Grove, MN. Approx. 144" Between Uprights, Approx. 84" to 132" Under Hoist Height, Overall Approx. 156"×61"×103"H, Includes an Accolift 1-ton Manual Push Beam Trolley, Budgit 1/2-ton Pneumatic Chain Hoist Rated for 1,000 lbs. at 90 PSIG. Preview and Removal by Appointment Only. Contact Greg at 612.325.2158 to Arrange.
#711 • 3-Ph. Transformer.
Unknown Input. Voltage Appears. 220 Dual Output. See Photos for Details. Enclosure Measures: 13" x 8" x 13".
#712 • New Vinylmax 52.5 x 45" Height Sliding window
#713 • Heavy Duty Oxy-acetylene Torch Cart with Steel Spoke Rims.
Overall: 35" x 32" x 64".
#714 • (2) Gorilla Ladders 300Lb. Cap. Standing Platforms.
47" x 12" x 20" Height.
#715 • (3) Cat 40 Rego-Fix ER-11, Collet Type Tool Holders.
Approx. 7" Extended Reach.
#716 • Skilsaw Model 3310, 10" Table Saw on Stand.
120V. Overall: 26" x 20" x 35".
#717 • Hose Crimping/Repair Kits, and More.
#718 • Heavy Duty Material Support Structure on Wheels.
Overall: 27" x 21" x 48". $20 Load Fee.
#719 • Bolts and More.
(3) Boxes 2-56 Socket Head Screws. (2) Boxes M12-1.75 Socket Head Screws. Plus Assorted Pins, Balls and Parts.
#721 • (2) Bil-Jax WLK BRD-TNL-19" X 7' TYPE A scaffolding Walk Boards.
Plywood Decks, Rated Distributed Load Capacity of 75 psf and measures 19 inches by 7 feet.
#722 • Crate and Pallet of Utility Line and Crossarm Guards.
Lot includes molded plastic crossarm guards, insulator covers, conductor line covers with hot stick brackets, formed sheet metal channel profiles, and interlocking safety barricades. Protective line equipment includes Chance Cat. No. M4948 rated for 15 kV phase-to-ground and Chance Cat. No. C406-0102 rated for 20 kV line-to-ground on 34.5 kV.
#723 • (2) Wiegmann 72" Length Wireway Auxiliary Electrical Enclosures.
(1) Cat. RSCG101072NK, 10" x 10" x 72". (1) Raintight RDB126, 12" x 12" x 72".
#724 • (5) Power Supplies.
(1) Gentec Phase Converters Model PC GEN DR 01-05, See All Photos for Types and Details.
#725 • Small Carbide Endmill Assortment.
Shanks from 3/8" to 1/8". Mostly Square End.
#726 • Assorted HSS Tools.
Drills, Reamers, Center Drills, Countersinks, Taps, and More.
#727 • Assorted Electrical Equipment.
(7) AB Signal Followers. (3) 24 Volt Power Supplies, Circuit Breakers, Fuses, Indicator Lamps All in Large Tote.
#728 • E Coder Supplies and Gages.
Open Date E Coder Supplies in Plastic Organizers. (4) Magnehelic Pressure Gauges. Roll of Beldin Cable. 3 Conductor. Plus More.
#729 • (38) Assorted Solid Carbide Endmill and Tooling
#731 • Cutting Tools.
Mixed HSS and Carbide. Endmills, Drills, Taps and More.
#732 • (3) Arcair Welding Leads.
#733 • 1/3 HP. 3-Ph. Blower Motor.
5" x 5-3/4" Inlet, Overall Not Including Switch Outlet: 18" x 12" x 13-1/2".
#734 • (40) Assorted Solid Carbide Endmill and Tooling
#735 • (4) 3-Ph. Cord Ends.
#736 • (5) Carlisle/Timken Wedge-Band Rubber Belts
R5VX1800
#737 • Tolomatic Linear Slide Rail.
39" Overall Slide Length, 24" Travel
#738 • Stanley Articulating Tool Arm.
32" Full Stretch, 36-1/2" Post Height
#739 • (25) Assorted Solid Carbide Endmill and Tooling
#741 • Baldor 5 HP Electric Motor with Dodge Right Angle Gearbox.
230/460 V. 3 Ph.
#742 • Large Quantity of Stainless Steel Pneumatic Fittings.
#743 • (29) Assorted Solid Carbide Endmill and Tooling
#744 • Knight Articulating Tool Arm.
36" Full Stretch, 36" Column Height.
#745 • (39) Assorted Solid Carbide Endmill and Tooling
#746 • (2) Boxes of Retractors.
31" Cable Length
#747 • KNF Neuberger Model UN726 FTP Diaphragm Vacuum Pump.
Rated for up to 20 PSIG Continuous Pressure within an Operating Temperature range of 40° to 105°F, 115 Volt, S/N: 17891331.
#748 • (24) Assorted Solid Carbide Endmill and Tooling
#749 • Industrial Motors and Drive Assemblies.
An Oriental Motor No. 5IK40GN-SYN 40 W 50/60 Hz 3-Phase 200 Volt Motor with a 5GN50RH Hollow-Shaft Gearhead with an Oriental Motor Model LIMO DRL60PA4G-05, also Includes a Maxon No. 248958 Motor with a No. 203114 Gearhead and an Apex Dynamics PE070 Planetary Gearbox with a 10:1 ratio and a backlash rating of 8 arcmin or less.
#751 • (41) Assorted Solid Carbide Endmill and Tooling
#752 • (37) Assorted Solid Carbide Endmill and Tooling
#753 • Orange 4-5/8" Double Lock Machine Vise
No Handle
#754 • (4) Industrial Servo Motors Including Pacific Scientific No. R43HCNA-SS-N0-VS-02, Trutech No. MT0864N8, MCG AB34000-Q5 and a Kollmorgen No. AKM32H-ANC2EH00.
#756 • (40) Assorted Solid Carbide Endmill and Tooling
#757 • (3) Omron R88M-G40030H-S2 Dervo Motors and (2) Apex Dynamics PE070 Planetary Gearboxes.
#720 • OKK KCV 600 CNC Vertical Machining Center.
Location: Vadnais Heights, MN. Neomatic 635 CNC control console, a Handy Pulser pendant, a 30-station automatic tool changer carousel, and a maximum spindle speed of 13,000 RPM. Electrical specifications include a 200/220 V supply voltage, 3-phase, 50/60 Hz frequency, and a 62 kVA rating.
#730 • Makino SNC64 Vertical Machining Center.
Makino Professional A CNC control console, an automatic tool changer carousel, an interior T-slot table with a mounted machine vise, and an external Daikin Inverter chiller unit. Control displays indicate 19,911 hours and 55 minutes of run time with a 41,568 part count, complemented by auxiliary registers recording 38,590.0 power hours, 35,699.6 spindle hours, and 35,914 auto operation hours.
#740 • Haas VF 5 Vertical Machining Center
30-horsepower high-torque motor, a 12,000 RPM maximum spindle speed, a 24-station automatic tool changer carousel, and a through-spindle coolant filtration system. Electrical ratings are 208/230 volts, 3-phase, 50/60 Hz with a 70-amp full load, under serial number 22052.
