Okeene, OK Former Seed Company Equipment Liquidation Online Only Auction

Okeene, OK Former Seed Company Equipment Liquidation Online Only Auction

Bidding opens on Wed, Jun 10 at 12:01PM CT

Bidding begins to end Thursday, June 25, 2026 6:00pm CT

902 W Oklahoma, Okeene, OK 73763

BUYER PREMIUM

10.0% ($2,000 Cap Per Lot)

#100

Doosan Pro 5 Forklift | Working Machine!

Doosan Pro 5 Forklift | Working Machine!

Manufacturer: Doosan

Series: Pro 5

Model: 15 (G15S-5 / G18S-5 series)

Power Type: LPG (Propane)

Capacity: 3,000 lbs (Approximate)

Key Features & Specifications

Mast: 3-Stage High Visibility Mast

Attachment: Integrated Side Shift

Tires: Pneumatic (Solid/Air-filled style for versatile terrain)

Brakes: Oil-Cooled Disc Brakes (OCDB)

Operator Safety: Operator Sensing System (OSS), Overhead Guard, and Rearview Mirror

Controls: Standard 3-lever hydraulic system (Lift/Lower, Tilt, Side Shift)

Condition Notes

Exterior: Showing typical signs of use, including paint wear, surface scrapes on the counterweight, and a minor tear in the operator's seat.

Tires: Rear steer tires show significant wear; front drive tires maintain good tread. The left rear tire will need to be repaired/replaced. 

Mechanical: Includes propane tank bracket and hose (tank not included).

Description

The forklift starts and runs smoothly. Will need to replace the battery. But it does start when jumped. 

Note: Please refer to photos for cosmetic condition and specific hydraulic configurations. Unit sold as-is.

#101

Snapper Riding Mower | Unknown Running Condition

Snapper Rear-Engine Riding Mower

Manufacturer: Snapper

Model: Classic Rear-Engine Rider

Engine: 8 HP Briggs & Stratton "Power Range"

Deck: Single Blade, Side Discharge

Key Features & Specifications

Engine: 8 HP Briggs & Stratton Synchro-Balanced gasoline engine.

Drive System: Disc-drive transmission with "on-the-go" shifting.

Steering: Traditional bicycle-style handlebars.

Deck: Compact single-blade cutting deck with manual height adjustment.

Frame: Classic "stand-up" frame design for easy storage and maintenance.

Condition Notes

Exterior: The unit is weathered and shows significant surface rust on the handlebars, wheels, and frame.

Seat: The original high-back seat is severely damaged with exposed foam and torn vinyl.

Tires: Both front tires are flat/collapsed and show heavy dry rot. Rear tires are intact but condition of tubes is unknown.

Battery: Includes a 12V lead-acid battery; charge status unknown.

Mechanical: The engine is dusty and show signs of long-term storage. Unit is currently sitting on a wooden pallet.

Description

This is the iconic Snapper "Comet" style rear-engine rider, a staple of residential lawn care for decades. Equipped with a reliable 8 HP Briggs & Stratton engine, these mowers are prized for their simple mechanical design and tight turning radius. This unit is being sold as a restoration project or a parts donor.

Note: Sold As-Is, Non-Running. This unit has been in long-term storage and will require tires and mechanical work to return to service.

#102

Gleaner Baldwin Model K Combine

Gleaner Baldwin Model K Combine

Manufacturer: Gleaner / Allis-Chalmers

Combine Serial No: 14A38117

Engine Model: Allis-Chalmers B-230 (Serial No: 386479)

Power Type: Gasoline

Key Features & Specifications

Engine: Allis-Chalmers B-230 4-cylinder gasoline engine; includes upgraded alternator and upright exhaust stack.

Header: Small grain rigid platform with a mechanical bat reel and full-width sickle bar.

Grain Bin: Top-loading galvanized grain tank with wooden extension rails and integrated cross-auger.

Unloading System: Manual-swing folding discharge auger.

Cab & Controls: Enclosed operator station featuring a 3-gauge cluster (Oil Pressure, Amperes, Water Temperature).

Drive System: Heavy-duty chain and belt drive system; rear-wheel hydraulic power steering.

Condition Notes

Mechanical: The drive chains, sprockets, and sickle guards show significant surface rust and oxidation from long-term stationary storage.

Chassis: The rear steering axle is currently supported on the right side by a concrete block.

Tires: Front drive tires show heavy weather checking and dry rot; rear steer tires appear to be newer automotive-style replacements.

Exterior: Galvanized body panels are structurally intact with typical surface patina. Cab glass is present.

Operational Status: Sold as a non-running unit. Internal mechanical condition is unknown.

Note: This item is sold As-Is, Where-Is. The winning bidder is responsible for all labor and equipment required for removal, including winching and transport.

#103

John Deere Z245 EZ Trak Mower | Non-Running

Manufacturer: John Deere

Model: Z245 EZtrak

Deck Size: 48-inch (Edge Cutting System)

Engine: John Deere Branded V-Twin (Briggs & Stratton manufactured)

Key Features & Specifications

Mower Type: Residential Zero-Turn

Cutting Deck: 48" triple-blade side-discharge deck with wash port.

Drive System: Dual hydrostatic transmissions operated by twin hand levers.

Height Adjustment: Hand-lever deck lift with multiple height-of-cut increments.

Operator Station: High-back seat with armrests, cup holder, and integrated storage compartment.

Condition Notes

Exterior: The unit is currently dusty/dirty and shows signs of outdoor storage or heavy use. Surface rust is visible on the deck and foot platform.

Seat: Original yellow vinyl seat is present but has visible cracking and wear.

Control Panel: Ignition switch area is missing the key/tumbler assembly (empty hole in dash). Wiring/relay is visible.

Mechanical: Engine appears intact; tires show moderate tread wear. The deck discharge chute is present but shows heavy wear/scuffing.

Description

Unknown working / mechanical condition. The ignition switch is missing and needs to be repaired/replaced. 

This John Deere Z245 is a popular residential zero-turn mower known for its maneuverability and 48" cutting width. This specific unit features a V-Twin engine and the "Edge" cutting system deck.

Important Note: This unit is being sold in As-Is condition. It currently shows signs of needed maintenance/repair, specifically regarding the ignition switch and general cleaning. Please review all photos for component completeness and physical condition.

#104

Davis Built Horizontal Feed Mixer

Davis Built Horizontal Feed Mixer

Manufacturer: H.C. Davis Sons Manufacturing Co.

Brand: Davis Built

Location of Manufacture: Bonner Springs, Kansas

Equipment Type: Horizontal Batch Feed Mixer / Roller Mill

Key Features & Specifications

Power Source: Electric motor drive (single phase/three phase status unknown).

Drive System: Heavy-duty chain and sprocket reduction with V-belt primary drive.

Mixing System: Horizontal ribbon or paddle-style internal agitator.

Discharge: Slanted side-discharge chute with chain-driven flighting for material out-take.

Mobility: Mounted on a single-axle trailer frame with integrated tongue jack; equipped with Riverside 8.25-20 10-ply tires.

Condition Notes

Exterior: Green paint is mostly intact but shows surface scuffs and minor oxidation.

Mechanical: Chains and sprockets show light surface rust but appear functional. The discharge chute has some paint wear on the internal floor.

Tires: Tires show age and weather checking; they should be inspected before any road transport.

Setup: Currently positioned in a stationary indoor setting with ductwork attached.

Description

This Davis Built horizontal mixer is a robust piece of industrial milling equipment designed for the consistent blending of flour, grain, and feed. Manufactured by the renowned H.C. Davis Sons, this unit features a heavy-duty trailer mount for portability around a farm or facility. The unit is powered by a large electric motor and includes an integrated discharge auger for easy material handling. It appears to have been used in a controlled indoor environment.

Note: Sold As-Is. Buyer is responsible for dismantling any connected ductwork and managing the removal from the building. Electrical disconnect and loading are the responsibility of the purchaser.

#105

Ag-Renewal FV-12 Field Vacuum Header 12' Wide, 6' Deep

Ag-Renewal FV-12 Field Vacuum Header

Manufacturer: Ag-Renewal, Inc. (Weatherford, OK)

Model No: FV-12

Serial No: 712081

Key Features & Specifications

Equipment Type: Specialized hydraulic field vacuum recovery header.

Width: 12-foot intake.

Drive System: Hydraulic motor drive with long-reach hoses and standard couplers.

Internal Components: Features a full-width internal auger for material movement.

Safety & Access: Intake is protected by a full-length wire mesh safety screen; top features hinged access panels for easy maintenance.

Mounting: Equipped with heavy-duty, multi-hole steel mounting brackets for machine attachment.

Condition Notes

Construction: Aluminum/galvanized body shows typical surface oxidation but remains structurally sound.

Hydraulics: Hoses show surface weathering and outer casing wear; motor appears intact.

Wear: Minor cosmetic bending on the leading edge of the aluminum housing; the wire mesh is in good condition with no major breaks.

Description

The Ag-Renewal FV-12 is a niche recovery tool designed for high-efficiency seed or light material collection directly from the field. Built with a lightweight yet durable metal housing, this unit utilizes hydraulic power to drive an internal auger. It is a specialized attachment ideal for seed production operations or custom harvesting needs.

Note: Sold as-is. Please verify mounting bracket compatibility for your specific application prior to bidding.

#106

Sweeper/Recovery Header 6' Wide, 6' Deep

Sweeper/Recovery Header 6' Wide, 6' Deep

Equipment Type: Hydraulic Rotary Sweeper / Field Recovery Header 

Key Features & Specifications

Application: Specialized header designed for seed recovery, field sweeping, or light material collection.

Drive System: Hydraulic motor drive with long-reach hydraulic hoses.

Sweeping Mechanism: Internal rotary brush with durable blue bristles designed for gentle material handling.

Construction: Lightweight and corrosion-resistant aluminum body with reinforced steel mounting points.

Mounting: Dual heavy-duty steel mounting brackets with multiple adjustment holes for machine attachment.

Safety & Access: Features a protective wire mesh screen across the intake area and hinged panels for internal component access.

Condition Notes

Exterior: The aluminum body is in very good condition with minimal denting. High-visibility branding decals are intact on both end panels.

Internal: The rotary brush bristles appear dense and in good operational condition.

Hydraulics: Hoses are present; however, they show some outer casing wear and sun-fading typical of outdoor storage.

Mounting: Steel brackets show surface rust but remain structurally sound.

Description

Specialized for niche agricultural harvesting and seed recovery. Utilizing a hydraulic rotary brush system, it is designed to sweep material into the header housing efficiently. Its aluminum construction provides durability without the excessive weight of traditional steel headers. 

Note: Sold As-Is. Hydraulic functionality has not been tested. Buyer should verify bracket compatibility for their specific machine before bidding.

#107

Sweeper/Recovery Header 14' Wide, 6' deep

Sweeper/Recovery Header 14' Wide, 6' deep

Equipment Type: Hydraulic Rotary Sweeper / Field Recovery Header

Key Features & Specifications

Application: Specialized header designed for seed recovery, field sweeping, or light material collection.

Drive System: Hydraulic motor drive with long-reach hydraulic hoses.

Sweeping Mechanism: Internal rotary brush with durable blue bristles designed for gentle material handling.

Construction: Lightweight and corrosion-resistant aluminum body with reinforced steel mounting points.

Mounting: Dual heavy-duty steel mounting brackets with multiple adjustment holes for machine attachment.

Safety & Access: Features a protective wire mesh screen across the intake area and hinged panels for internal component access.

Condition Notes

Exterior: The aluminum body is in very good condition with minimal denting. High-visibility branding decals are intact on both end panels.

Internal: The rotary brush bristles appear dense and in good operational condition.

Hydraulics: Hoses are present; however, they show some outer casing wear and sun-fading typical of outdoor storage.

Mounting: Steel brackets show surface rust but remain structurally sound.

Description

Specialized for niche agricultural harvesting and seed recovery. Utilizing a hydraulic rotary brush system, it is designed to sweep material into the header housing efficiently. Its aluminum construction provides durability without the excessive weight of traditional steel headers.

Note: Sold As-Is. Hydraulic functionality has not been tested. Buyer should verify bracket compatibility for their specific machine before bidding.

#108

Transfer Auger 8 1/2' Long, 8" Diameter

 1 HP Utility Grain Auger | 8 1/2' Long, 8" Diameter 

Equipment Type: Portable Utility / Bin-Sweep Grain Auger

Motor Brand: Techtop "Farm Duty" Single Phase Motor

Power Rating: 1 HP

Motor Speed: 1730 RPM

Electrical Requirements: 115V / 208-230V | TEFC (Totally Enclosed Fan Cooled)

Drive System: Belt-driven with a large pulley assembly

Features: Safety intake guard cage, dual angle-iron stabilizer legs, and painted steel tube housing.

Condition: Used. Motor nameplate is intact and legible; showing typical cosmetic surface rust and wear from outdoor storage. Belt and operational status unverified.

#109

Hutch Grain Auger Tube | 16' / 8" Diameter

Hutch Grain Auger Tube | 16' / 8" Diameter 

Brand/Manufacturer: Hutch

Item Type: Grain auger components/replacement tube assembly

Features: Galvanized steel main tube, integrated belt drive pulley wheel, and red-painted bracket frame components.

Condition: Used. Visible surface rust on the pulley wheel, red brackets, and metal edges. The main galvanized tube shows weather wear and minor surface discoloration. Black heavy-duty tape or protective wrapping is present around the connection joint between the head assembly and the main tube. Mechanical functionality is untested.

Inclusions: As pictured, including the galvanized tube, head assembly with pulley wheel, and attached mounting brackets. (Note: Does not include motor or separate background equipment).

#110

Transfer Auger 16 1/2' Long, 8" Diameter

Grain Auger Tube | 16' / 8" Diameter

Brand/Manufacturer: Unknown

Item Type: Grain auger components/replacement tube assembly

Features: Galvanized steel main tube and red-painted bracket frame components.

Condition: Used. Visible surface rust on the pulley wheel, red brackets, and metal edges. The main galvanized tube shows weather wear and minor surface discoloration. Black heavy-duty tape or protective wrapping is present around the connection joint between the head assembly and the main tube. Mechanical functionality is untested.

#111

Vintage Drag Conveyor | 16' Long, 8" Wide

Vintage Drag Conveyor | 16' Long, 8" Wide

Item Type: Mechanical drag chain conveyor/ auger unit.

Features:

Sectional metal trough with white painted exterior panels.

Full-length single-center drag chain assembly with integrated steel paddles/flights.

Heavy-duty wood plank flooring lines the bottom of the trough.

Large flared intake hopper section at one end.

Large spoked belt-drive pulley wheel mounted at the discharge/drive end.

Condition: Used, vintage. Heavy surface rust and oxidation are present across all interior metal panels, hopper, drag chain, and pulley wheel. Exterior white paint shows extensive chipping, scaling, and some rust. Wood flooring exhibits weathering and staining consistent with outdoor exposure but remains intact. Mechanical drive assembly and chain movement are untested.

Inclusions: Complete trough assembly as pictured, including internal drag chain, wood floor planks, hopper, and attached drive pulley. (Note: Does not include external electric motor or loose galvanized tubes pictured in the background).

#112

Vintage Graham-Hoeme Chisel Plow

Vintage Graham-Hoeme Chisel Plow

Brand/Manufacturer: The Graham-Hoeme Plow Co., Amarillo, Texas

Model: 5

Item Type: Pull-type chisel plow/field cultivator

Features:

Heavy-duty steel channel frame assembly with pull-tongue hitch.

7 high-clearance curved spring steel tines with bolt-on shovel points.

Dual pneumatic transport wheels with mechanical depth-adjustment lever and notched sector gear.

Integrated tension helper springs on the hitch tongue assembly.

Condition: Used, vintage/antique. Heavy surface rust, fading, and weather oxidation across the entire frame, tines, levers, and wheel rims. Tires show dry rotting, surface cracking, and wear consistent with age and outdoor storage. Nameplate is intact but weathered with some pitting and fading. Mechanical levers and adjustment mechanisms are untested.

Inclusions: Complete towable implement assembly as pictured, including frame, tines, wheels, tires, and adjustment handles.

#113

Grain Transfer Auger | 24' Long, 6" Diameter

Portable Electric Grain Auger

Brand/Manufacturer: Dayton (Electric Motor), Auger unit unbranded

Item Type: Portable, towable electric grain auger

Motor Specifications:

Brand: Dayton Electric Mfg. Co.

Phase: Three Phase

Speed: 1740 RPM

Voltage: 230/460V

Amperage: 8.6/4.3A

Auger Features:

Wheeled transport carriage frame

Manual hand crank winch mechanism for height adjustment

Belt-driven pulley system

Square D electrical control switchbox mounted on the tube

Condition: Used. Paint fading, discoloration, and notable surface rust on the main auger tube, motor mount bracket, and winch. Tires are intact but show weathering. The electrical power cord extending from the control box is cleanly severed/cut and requires replacement. Mechanical and electrical components are untested.

Inclusions: Complete transportable assembly as pictured, including the carriage frame, manual winch, three-phase Dayton motor, drive belt, and attached switchbox. (Note: Does not include the separate background auger tube or shipping container).

#114

Grain Transfer Auger | 36' Long, 6" Diameter

Lot Description: Portable Hutchinson Grain Auger

Brand/Manufacturer: Hutchinson (Auger Unit), Dayton (Electric Motor), Curtis Machine Company (Gearbox)

Item Type: Portable, towable electric grain auger

Motor Specifications:

Brand: Dayton

Type: TEFC Capacitor-Start Farm Duty Motor

Speed: 1740 RPM

Voltage: 230V

Amperage: 14.5A

Frequency: 60Hz

Auger Components & Features:

Wheeled transport carriage frame

Exposed intake flighting at the bottom end

Belt-driven drive system with a large pulley wheel

Curtis right-angle gearbox assembly

Manual cable winch adjustment mechanism for setting operating height

Condition: Used. Weathered exterior with surface rust concentrated heavily on the lower auger intake sleeve, exposed flighting, motor mounting plate, pulley wheel, and carriage frame. The Hutchinson brand decal on the main tube shows heavy cracking and peeling. The gearbox housing is covered in grease and dirt residue. No electrical power plug is connected to the bare motor wiring leads. Mechanical and electrical functionalities are untested.

Inclusions: Complete transportable assembly as pictured, including the carriage frame, manual winch, green Dayton farm duty motor, drive belt, right-angle gearbox, and main auger tube with internal flighting.

#115

40' Connex Shipping Container | Used

40' Connex Shipping Container | Used

Size/Dimensions: 40ft Length x 8ft Width standard intermodal cargo shipping container.

Identification Number: 821742.

Exterior Features: Corrugated steel construction, lockable dual end doors, integrated louvered ventilation panel, and tan paint finish.

Interior Features: Traditional plank wood flooring and corrugated steel interior sidewalls.

Condition: Used, contents included.

Exterior/Interior Shell: Shows typical wear, including paint scraping, surface rust bleed, minor panel denting, and areas of peeled paint revealing a red primer base. Holes are present in both the roof and sides throughout the container.

Interior Floor: The wood flooring shows cosmetic dirt, staining, and moisture discoloration.

Inclusions: Sold complete with all remaining interior contents as pictured, consisting of wrapped pallets of bagged "Fast Finish" construction/agricultural materials.

Removal Notice: The buyer is strictly responsible for the timely removal of this lot. Failure to remove the item within the designated pickup window will result in the forfeiture of the item and all funds paid.

#116

20' Connex Shipping Container | Used

20' Connex Shipping Container | Used

Size/Dimensions: 20ft Length x 8ft Width standard intermodal cargo shipping container.

Identification Number: 9532653.

Exterior Features: Corrugated steel construction, lockable dual end doors, and red/faded tan paint finish.

Interior Features: Wood plank flooring and corrugated steel interior sidewalls.

Condition: Used, older model with wear.

Exterior: Shows notable cosmetic wear, including widespread surface rust, paint scaling, staining, and faded lettering/decals. No structural holes or roof punctures are apparent.

Interior: Discoloration and minor surface oxidation are present on the internal steel walls.

Inclusions: Sold complete with all loose contents remaining inside the unit as pictured, including wooden pallets, cardboard boxes, old bedding/comforters, scrap materials, and miscellaneous unclassified items.

Removal Notice: The buyer is strictly responsible for the timely removal of this lot. Failure to remove the item within the designated pickup window will result in the forfeiture of the item and all funds paid.

#117

8' Shop Made Hay Feeder

Heavy-Duty Steel Livestock Hay Feeder | 8' Long 

Item Type: Square/rectangular livestock fence feeder / hay feeding cradle.

Features:

Welded structural steel pipe frame with heavy-gauge vertical feeding bars.

Wire mesh paneling lining the lower interior sides to reduce hay waste.

Solid steel sheet metal panels enclosing both ends.

Integrated ground skids/runners for easier field relocation.

Condition: Used. Shows extensive weather exposure with heavy surface rust and oxidation across all steel pipes, mesh wiring, and end panels. There are some non-uniform replacement bars/pipes visible on the side framing. Structural integrity is intact, but the unit is weathered.

Inclusions: Complete feeder unit as pictured.

#118

Grain Transfer Auger 26' Long, 8" Diameter

Grain Transfer Auger 26' Long, 8" Diameter

Item Type: Portable, towable grain bin auger.

Features:

Two-wheeled transport carriage frame assembly.

Red painted main auger tube housing internal flighting.

Top-mounted belt-driven dual pulley system with discharge spout.

Exposed mechanical drive shaft running parallel along the top of the main tube.

Condition: Used. Shows extensive cosmetic wear, including paint fading, peeling, and surface rust throughout the main tube, pulleys, and carriage frame. Transport tires are intact. The unit is missing its dedicated motor/power source, and the power drive belt is weathered. Mechanical and spin functionalities are untested.

Inclusions: As pictured, including the transport carriage, main auger tube with internal flighting, external drive shaft, and top pulley assembly.

#119

Grain Transfer Auger 24' Long,7" Wide Belt Auger

Grain Transfer Auger 24' Long,7" Wide Belt Auger

Features:

Open-trough style main conveyor frame.

Rubber or heavy-duty composite conveyor belt equipped with integrated rubber flights/cleats.

Flared steel intake hopper bucket located at the base.

Two-wheeled transport carriage frame featuring a manual height-adjustment mechanism.

Top-mounted drive pulley wheel assembly.

Condition: Used. Heavy oxidation and uniform surface rust are present across the entire steel trough frame, hopper interior, and carriage framing. Blue paint finish on the carriage support arms shows significant chipping, scaling, and weathering. Tires remain intact but exhibit dry rotting and outdoor weathering consistent with extended storage. The unit is missing its dedicated motor or engine power unit. Mechanical movement and drive components are untested.

Inclusions: Complete transportable conveyor frame assembly as pictured, including the carriage frame, wheels, flighted belt, and attached intake hopper.

#120

Vintage Mechanical Platform Beam Scale

Vintage Mechanical Platform Beam Scale

Equipment Type: Vintage/Industrial Mechanical Platform Scale (Beam Style)

Mechanism: Mechanical poise and counterweight balance beam system

Beam Capacity: Noted up to 100 lbs on the main graduated face beam (total capacity likely higher with supplemental hanging counterweights).

Portability: Equipped with four integrated cast-iron wheels at the base platform.

Markings: Features an official State of Oklahoma Weights & Measures inspection sticker on the main pillar.

Condition: Used, vintage condition. Heavy cast-iron and steel construction with visible surface rust, dust, and cosmetic wear from storage. Mechanical linkage moves, but overall calibration and operational accuracy are unverified.

Inclusions: Includes attached counterweight assembly hanger and top component tray as pictured. Currently sitting on a wooden pallet for easier transport.

#121

Vintage Detecto Industrial Platform Scale

Vintage Detecto Industrial Platform Scale

Brand/Manufacturer: Detecto Scales Inc., Brooklyn, New York, U.S.A.

Model: 854

Serial Number: 780-4407

Item Type: Industrial beam platform scale

Features:

Mechanical weighing beam with sliding poise counterweights

Dual-sided beam markings graduation

Heavy-duty cast metal column and weighing platform

State of Oklahoma Weights & Measures inspection sticker attached

Condition: Used, vintage. Shows cosmetic wear including surface scratches, dust, and localized spot rusting on the metal platform and column base. Mechanical calibration and weight accuracy are untested.

Inclusions: Scale assembly as pictured, including the column, platform, balance beam, and attached poise weights

#122

W-W Grinder Corp. Electric Chipper / Shredder

W-W Grinder Corp. Electric Chipper / Shredder

Brand/Manufacturer: W-W Grinder Corp., Wichita, Kansas

Model: Renegade 250

Item Type: Stationary electric chipper / shredder unit

Motor Specifications:

Brand: WEG

Power: 1.0 HP (0.75 kW)

Phase: Single Phase (PH 1)

Speed: 1750 RPM

Voltage: 115/230 V

Frequency: 60 Hz

Enclosure: TEFC

Features:

Large top-loading green sheet metal intake hopper

Belt-driven pulley system connecting motor to processing rotor

Lower metal discharge chute

Mounted on a custom square-tube steel ground stand

Condition: Used. Notable surface rust, paint scraping, and oxidation are present on the motor casing, pulley wheels, lower chute assembly, and frame base. Power cord insulation shows superficial dirt and weathering. Internal cutting blades and electrical operations are untested.

Inclusions: Complete assembly as pictured, including the hopper housing, WEG motor, drive belt, discharge chute, and support stand.

#123

L&A Seed Cleaner with Seed House Components

Lot Description: L&A Seed Cleaner with Seed House Components

Brand/Manufacturer: L&A Mechanical (labeled "L&A Seed Cleaner")

Item Type: Industrial seed cleaner machine and associated processing mill components

Included Components:

Main horizontal seed cleaner trough assembly with light blue painted finish

Exposed top chain-driven paddle/flight conveyor mechanism

Two large, tapered sheet metal vertical grain/seed drop chutes (funnels)

One unmounted green roller/cylindrical component with heavy-duty mounting bracketry

A large structural louvered ventilation or shaker-screen rack assembly

A stack of loose structural metal tubing, pipe brackets, and plywood sheets

Miscellaneous transition spouts, metal casings, and loose hardware

Condition: Used, disassembled. Widespread cosmetic and surface wear is present throughout all items, including paint peeling, heavy surface oxidation, rust on bare metal parts, and accumulated dust/debris. Electrical motors or drive units are not present on the main units. All components are untested and sold as-is.

Inclusions: Sold as a single lot containing all disassembled cleaner sections, chutes, vents, tubing, and scrap wood pallets shown in the designated pile.

#124

Whirlpool Electric Smooth-Top Range

Whirlpool Electric Smooth-Top Range

Brand/Manufacturer: Whirlpool

Item Type: Freestanding electric range / oven

Features:

Ceramic glass smooth-top cooking surface with four radiant heating elements.

Rear control console featuring manual dial knobs and digital display interface.

Front oven window door with integrated handle bar.

Lower storage or broiler drawer section.

Condition: Used. Exterior casing shows heavy cosmetic staining, dirt buildup, and liquid streaks from storage. The lower drawer panel is slightly misaligned/ajar. Interior oven cavity contains visible carbon residue, food debris, and used aluminum foil lining along the bottom. Two interior wire racks and the upper/lower heating elements are intact. Electrical functionalities are completely untested.

Inclusions: Range unit as pictured, including two internal oven wire racks. (Note: Does not include the separate washing machine or items visible in the background).

#125

Maytag Bravos MCT Top-Load Washing Machine

Maytag Bravos MCT Top-Load Washing Machine

Brand/Manufacturer: Maytag

Model/Line: Bravos MCT (Maytag Commercial Technology)

Item Type: Top-load residential washing machine

Features:

Tinted glass main lid.

Rear control console with a center cycle selection dial, digital status screen, and push-button option modifiers.

Stainless steel wash drum equipped with a low-profile bottom impeller.

Integrated dispenser compartments for liquid bleach and fabric softener.

Condition: Used. The exterior cabinet and control panel console exhibit significant accumulation of dust, dirt, and storage debris. Visible rust staining is present along the upper rim of the inner tub opening. Mechanical, electronic, and plumbing operations are completely untested.

Inclusions: Washing machine unit as pictured, including two loose black rubber water supply inlet hoses stored inside the drum. (Note: Does not include the separate oven range or loose cardboard pictured in the background).

#126

Industrial Electronic Platform Floor Scale

Industrial Electronic Platform Floor Scale

Item Type: Heavy-duty electronic platform floor scale / warehouse deck scale.

Features:

Thick steel diamond-plate (tread plate) non-slip surface.

Blue painted finish.

Integrated junction box assembly with wiring leads exposed at one edge corner.

Condition: Used. The platform deck exhibits significant accumulation of surface dirt, dust, and dry organic residue from storage. A small access plate near the wiring box is detached/loose. No external digital weight indicator or display console is present. Complete structural, load cell, and electronic functionalities are untested.

Inclusions: Heavy-duty floor scale deck with attached internal wiring and junction box as pictured.

#127

Industrial Platform Floor Scale Deck

Industrial Platform Floor Scale Deck

Item Type: Heavy-duty mechanical or electronic warehouse platform scale deck.

Features:

Thick steel diamond-plate (tread plate) non-slip surface texture.

Unpainted/natural gray steel finish.

Low-profile, heavy-gauge perimeter frame construction.

Condition: Used. The deck surface shows typical operational wear, including minor superficial scratches, scuffs, light surface rust specks, and accumulated dirt or storage debris. No detached junction boxes, wiring leads, or digital indicators are visible externally on the unit. Internal load cells, leveling feet, and weighing mechanics are completely untested.

Inclusions: Platform floor scale deck assembly as pictured. (Note: Does not include the separate wheeled scale base frame, carts, or floor mats visible in the background).

#128

"The Standard" Portable Platform Scale

"The Standard" Portable Platform Scale

Brand/Manufacturer: The Standard Scale & Supply Co., Pittsburgh, PA

Item Type: Antique mechanical beam platform scale

Features:

Cast iron weighing platform embossed with "The Standard" and "Pittsburg, PA"

Four integrated iron wheels for portability

Mechanical brass weighing beam with graduated markings up to 100

Sliding poise weights and a hanging counterweight loop

Red painted wooden column pillar and upper protective beam housing

Condition: Antique/vintage condition. Shows heavy signs of age, including comprehensive dust accumulation, cobwebs, paint fading, and surface rust on iron components. Mechanical calibration and weighing accuracy are untested.

Inclusions: Complete scale assembly as pictured, including wheeled platform base, column, mechanical beams, and attached counterweight hanger. (Note: Does not include adjacent floor scales, boxes, or background barn equipment).

#129

FMC Skid-Mounted Utility Sprayer Tank Assembly

FMC Skid-Mounted Utility Sprayer Tank Assembly

Brand/Manufacturer: FMC

Markings: "Lic No. C-004501" stenciled on side panels.

Item Type: Skid-mounted agricultural/utility sprayer fluid tank with integrated pump unit.

Features:

Molded red plastic/polyethylene fluid storage tank equipped with a top-mounted circular fill lid.

Side-mounted translucent sight gauge strip for fluid level monitoring.

End-mounted mechanical plumbing array containing a right-angle drive pulley wheel, fluid pressure gauge, accumulator cylinder, and valve controls.

Heavy-duty steel channel sub-frame skid configuration designed for palletized transport or truck-bed mounting.

Condition: Used. Components exhibit cosmetic weathering, surface scuffs, dirt accumulation, and grease residue consistent with field storage. The unit is missing its standalone gasoline engine or electric drive motor, leaving the main pump input shaft open. Internal seals, structural tank integrity, and mechanical pump operations are completely untested.

Inclusions: Complete skid assembly as pictured, including the poly tank casing, attached plumbing manifold, pressure valves, accumulator, and internal drive pulley mechanisms. (Note: Does not include the wooden pallet base or separate wire cages/machinery visible in the background background).

#130

Dual-Station Mechanical Sorter / Sizer

Dual-Station Mechanical Sorter / Sizer

Item Type: Multi-stage mechanical pecan/nut grading, sizing, and sorting table assembly.

Drive Motors:

Upper Motor: Dayton electric capacitor-start motor, 1/2 HP, 1725 RPM, 115/208-230 V, 60 Hz, 56 frame size.

Lower Motor: Dayton electric motor, base-mounted configuration.

Features:

Dual sizing stations with divided multi-slot sorting bays and corrugated distribution trays.

Large elevated hopper compartment wrapped in red protective paneling.

Rotary wire-mesh drum sifter section supported by rubber guide wheels.

Integrated multi-roller sizing deck bed below the upper drum.

Heavy-duty square steel tubing support frame mounted on a dual-runner skid base.

Condition: Used. Components show operational dirt, dust accumulation, and minor scuffing across the metal and painted panels from storage. Wire insulation and drive belts show typical weathering. Mechanical, sizing, and electrical functions are completely untested.

Inclusions: Sorting assembly complete with the frame base, dual sorting trays, hopper casing, sifting drum, and both attached Dayton electric motors as pictured. (Note: Does not include the background FMC sprayer, loose pallets, plastic barrels, or storage bins).

#131

Portable Electric Grain Auger

Portable Electric Grain Auger

Item Type: Portable, wheeled electric grain auger.

Features:

Two-wheeled transport carriage frame configuration.

Green painted main auger tube housing internal flighting.

Top-mounted electric drive motor connected via belt-and-pulley system.

Integrated manual cable winch mechanism for adjusting tube height.

Small electrical junction box mounted to the underside of the main tube with hand-marked "R" and "F" indicators.

Condition: Used. The green paint finish shows generalized fading, storage dirt, and localized scuffs. Widespread surface dust, cobwebs, and minor oxidation are present on the motor housing, pulley system, and transport wheels. The motor identification plate is faded and unreadable. Mechanical and electrical components are completely untested.

Inclusions: Complete transportable assembly as pictured, including the carriage frame, pneumatic tires, manual winch, electric motor, drive belt, pulley wheel, and auger tube. (Note: Does not include background seed cleaners, storage bins, or warehouse structures).

#132

Howe Richardson Scale & Universal Bucket Elevator with Overhead Surge Bin

Howe Richardson Scale & Universal Bucket Elevator with Overhead Surge Bin

Brand/Manufacturer: Howe Richardson Scale Company, Clifton, New Jersey, U.S.A. / Universal

Scale Model: G17

Scale Capacity: 140 LBS

Item Type: Industrial grain/seed bagging scale station, vertical bucket elevator leg, and overhead surge hopper system.

System Components & Features:

Howe Richardson Mechanical Automatic Scale: Model G17 hopper-style scale unit equipped with mechanical trip levers, gate linkages, and a hanging counterweight assembly. Features an Oklahoma State University property tag (No. 043980).

Overhead Surge Hopper: Large, tapered steel gravity-fed bin with red painted exterior finish. Mounted on heavy-duty vertical structural steel pipe pillars and equipped with an attached metal maintenance access ladder.

Universal Vertical Bucket Elevator: Enclosed structural steel elevator leg casing featuring a blue painted lower boot section with integrated cleanout/inspection slides.

Condition: Used, facility-housed. Steel casings, framework, and structural supports exhibit a typical layer of dust, generalized cosmetic wear, and surface rust consistent with an indoor mill or seed plant environment. Complete mechanical operation, load accuracy, and conveyor belt/bucket functionality are untested.

Inclusions: Complete processing station assembly as pictured, including the structural support columns, ladder, surge bin, Howe Richardson scale unit with attached counterweights, and the vertical bucket elevator leg. (Note: Does not include the separate background wood-frame Clipper seed cleaner or loose floor debris).

Removal Notice: The buyer is strictly responsible for the complete detachment, teardown, and removal of this entire system in a timely manner. Failure to remove the lot within the designated pickup window will result in the forfeiture of the item and all funds paid.

#133

Clipper Seed Cleaner System with Elevator Leg & Bins

Clipper Seed Cleaner System with Elevator Leg & Bins

Brand/Manufacturer: A.T. Ferrell & Co., Saginaw, Michigan, U.S.A. (Clipper brand)

Item Type: Antique timber-frame seed/grain cleaner machine mill group, complete with a dedicated vertical bucket elevator leg and multiple gravity-fed storage surge hoppers.

System Components & Features:

Clipper Mechanical Seed Cleaner: Heavy structured timber frame housing internal shaker screens and sieve bays. Equipped with side-mounted belt-driven cast iron pulleys, an eccentric drive linkage, and a large front-mounted galvanized steel intake hopper bucket stenciled with "A.T. Ferrell & Co. Saginaw Mich U.S.A."

Vertical Bucket Elevator Leg: Fully enclosed galvanized steel elevator trunk structure featuring a built-in top distribution head, multi-groove belt pulley drive, and an integrated bottom collector boot unit.

Overhead Surge Bins & Hoppers: Includes multiple gravity-discharge storage bins constructed from galvanized steel sheeting and wood panels, complete with structural angle-iron support legs and lower flow-control gate vents.

Condition: Used, vintage/antique facility installation. Timber and metal surfaces show a thick layer of dust, cobwebs, localized wood seasoning scuffs, and areas of superficial surface rust consistent with a stored mill setting. Structural frames are intact. All belt drives, internal screen shakers, and mechanical elevators are untested.

Inclusions: Sold as a single lot containing the timber-frame Clipper seed cleaner machine, the main galvanized vertical bucket elevator leg, and all interconnected elevated steel surge bins and hopper stands as pictured. (Note: Does not include the electrical panel boards on the wall, separate mechanical sorters, or loose floor debris).

Removal Notice: The buyer is strictly responsible for providing the necessary tools, equipment, labor, and transport for the complete detachment, teardown, and removal of this entire plant system promptly. Failure to remove the lot within the designated pickup window will result in the forfeiture of the items and all funds paid.

#134

Pecan De-Huller / Cleaner with Storage Rack and Screens

Pecan De-Huller / Cleaner with Storage Rack and Screens

Item Type: Vintage mechanical rotary cage pecan de-huller, cleaner, and aspiration blower unit, packaged with an extensive collection of processing screens and a dedicated wooden storage rack.

Cleaner Features:

Large cylindrical sorting cage constructed with open steel bars and an enclosed solid drum section at the discharge end.

Integrated internal blending/conveying paddles inside the drum.

Side-mounted mechanical aspiration blower/squirrel-cage fan assembly with a tapered transition chute.

Belt-and-pulley system configuration utilizing cast wheels and guide rollers.

The entire processing unit is mounted on a mobile tubular steel frame equipped with ground casters.

Screen & Rack Inventory:

One custom floor-standing wooden storage organizer cabinet cabinet designed to vertically house flat screens.

An extensive assortment of interchangeable flat agricultural processing screens/sieves built with a mix of timber frames, woven wire mesh, and perforated sheet metal panels.

Condition: Used, vintage/antique. Mechanical components exhibit comprehensive outdoor/warehouse storage wear, including widespread surface rust on all bare steel elements, faded paint, and deep dust layers. The drive system is missing a dedicated engine or electric motor power unit. All mechanical rotations, fan blades, and pulley tracks are untested. Flats screens show typical wood seasoning, minor mesh bowing, and dirt accumulation but remain structurally intact.

#135

W.B. Cox Co. Portable Platform Scale

W.B. Cox Co. Portable Platform Scale

Service Provider Tag: W.B. Cox Co. Sales & Service, Tulsa, Oklahoma

Item Type: Industrial mechanical beam platform scale

Features:

Smooth rectangular cast metal weighing platform deck

Four integrated steel wheels for mobile transport

Mechanical balance beam with sliding poise weights and a hanging counterweight pan loop

Top-mounted open metal parts/tool storage tray box

State of Oklahoma Consumer Protection Services' weights and measures sticker attached to the support pillar

Condition: Used, vintage. The unit exhibits comprehensive storage accumulation, including deep surface dust, cobwebs, and surface debris across the platform deck and mechanical components. Calibration accuracy and lever smooth movement are untested.

Inclusions: Complete mobile scale assembly as pictured, including the wheel-mounted base deck, vertical pillar, mechanical reading beam, counterweight hanger, and top storage tray box. (Note: Does not include background wooden pallets, structural ladders, or secondary mill machinery).

#136

Clipper Super 29D Seed Cleaner with Integrated Vertical Elevator Leg

Clipper Super 29D Seed Cleaner with Integrated Vertical Elevator Leg

Brand/Manufacturer: A.T. Ferrell & Co., Saginaw, Michigan, U.S.A. (Clipper brand)

Model: Super 29D

Item Type: Industrial timber-frame seed and grain cleaning mill machine with an attached vertical bucket elevator leg assembly.

System Components & Features:

Clipper Super 29D Processing Unit: Heavy structured timber frame housing a multi-tier shaking screen configuration and internal sieve bays. Stenciled verbatim with "A.T. Ferrell & Co. Saginaw Mich U.S.A." across the front cross-beams.

Drive System: Equipped with a bottom-mounted green electric drive motor, safety switch boxes, and a complex external network of mechanical belt-and-pulley tracks driving the main shaker shaft and air aspiration fans.

Chutes & Collect Hoppers: Outfitted with an upper gravity-feed surge bin, intermediate zinc-plated metal transition drop chutes, and external catch hoppers. Includes an attached pink wooden ladder for side-access maintenance.

Vertical Bucket Elevator Leg: A standalone, fully enclosed vertical steel elevator trunk section painted bright blue, featuring a flared ground-level collection intake boot.

Condition: Used, vintage facility installation. The timber framing, metal chute paths, and elevator trunk display a layer of facility dust, cobwebs, and minor spot rusting on bare iron pulley wheels consistent with extended indoor storage. The structural frame and wood bays remain solid. Power connectivity, motor operation, fan function, and screen shaker mechanics are completely untested.

Inclusions: Sold as a single interconnected lot comprising the main wooden Clipper Super 29D cleaner unit, the attached access ladder, overhead surge bin, transition chutes, and the blue vertical bucket elevator leg. (Note: Does not include the separate gray industrial elevator structure behind it or loose background pallets).

Removal Notice: The buyer is strictly responsible for providing the necessary tools, rigging equipment, qualified labor, and vehicles to promptly complete the detachment, electrical disconnection, teardown, and removal of this entire processing plant structure. Failure to safely remove the lot within the designated pickup window will result in the immediate forfeiture of the property and all funds paid.

#137

Exterior Overhead Gravity-Flow Storage Bin | Approx. 16' Tall, 6' Wide

Exterior Overhead Gravity-Flow Storage Bin

Item Type: Exterior-mounted overhead gravity-discharge storage hopper / surge bin.

Features:

Square-format upper sheet metal storage body with an integrated steep-sloped cone bottom for gravity material flow.

Heavy-gauge structural steel angle-iron corner legs with criss-cross X-bracing.

Bottom square slide-gate flange opening.

Positioned directly adjacent to the facility wall for overhead overhead loading/unloading configurations.

Condition: Used. Displays heavy and uniform exterior surface oxidation and rust across the entirety of the hopper body, sloped cone, and structural leg frame. The unit is surrounded by dense weed growth at its base. Structural welds and slide-gate functionality are untested.

Inclusions: Elevated storage bin frame assembly as pictured, including the bin walls, sloped cone bottom, and cross-braced support legs. (Note: Does not include the facility building structure, utility poles, background metal containers, or loose interior barrels visible in the doorway).

Removal Notice: The buyer is strictly responsible for providing the necessary tools, lifting equipment, rigging, insurance, and labor for the complete detachment, structure-disengagement, and safe removal of this entire overhead bin in a timely manner. Failure to safely remove the lot within the designated pickup window will result in the immediate forfeiture of the property and all funds paid.

#138

Exterior Wall-Mounted Cyclone Dust Collector / Overhead Bin | Approx. 20' Tall, 4' Wide

Exterior Wall-Mounted Cyclone Dust Collector / Overhead Bin 

Item Type: Industrial exterior cyclone dust collector / centripetal material separator.

Features:

Tapered cone-bottom cyclone separator body with a top-mounted air exhaust vent.

Side-mounted rectangular intake duct passing directly through the building's sheet metal exterior wall.

Elevated structural steel tube cage stand frame configuration.

Bottom gravity-discharge spout.

Condition: Used. The metal separator body and structural cage frame feature a faded red paint finish with generalized surface oxidation and localized rust patches. The lower discharge collector path is positioned over a weathered, unattached metal barrel drum. Internal seals and airflow performance are untested.

Removal Notice: The buyer is strictly responsible for providing all necessary tools, lifting machinery, ladders, rigging, and qualified labor for the complete detachment from the building, structure-disengagement, and safe removal of this entire system in a timely manner. The buyer must also ensure that any wall openings left by the duct removal are properly secured. Failure to safely remove the lot within the designated pickup window will result in the immediate forfeiture of the property and all funds paid.