The Newman Minneapolis Moline Collection-Parts and Projects Day 1 Online Only Auction

The Newman Minneapolis Moline Collection-Parts and Projects Day 1 Online Only Auction

Auction starts to close March 4^th at 6:00 PM CT

2475 Old Hickory Tree Rd, St. Cloud, Florida 34772

Click on the BID NOW link to the left to see more pictures

Bill Newman had the largest Minneapolis Moline collection in the state of Florida and we are honored to be presenting it to you! In this auction you will find a large assortment of Minneapolis Moline parts, power units, weights, implements, attachments, and much more! This is the second of 4 consecutive auctions that will be ending March 3rd, 4th, 5th, and 6th so be sure to check out all four sales!

 Please note: 7.5% Florida sales tax applies

Lot 154:Bush Hog TH4200 Side by Side

Honda engine and transmission are in unknown condition. Side by side is equipped with a tilt box with tail gate. It is 2wd. Tires are 25x10-12 on the front and 25x11-12 on the rear. Tires are weather checked. The dash has a crack in the center. The top back rest is missing. It is sun faded. 

Lot 170:Trailer

Tires are 8.25-20 mismatched. It is equipped with a stand. 

Lot 177:Mobile Sand Blaster and Rack

The hoses are cracked on the Empire blaster. Valves turn freely. It is in unknown condition. The stand measures 56 3/4” by 51 1/2”. The stand believed to hold the two bins on the next lot.

Lot 178:(2) Gravity Dump Bins

Bins are marked “Canned Sand”. The steps have been cut on the off one side on both bins. The bin marked 117 has a large dent on one side. They are believed to fit on the stand on the previous lot. They measure 45 1/4” wide by 53” long. Both have lids.

Lot 179:7’ Bush Hog Pull Type Mower

Model 7 Bush Hog mower is equipped with one hard laminated tire. One tire is missing. The mower runs off of 540 PTO. It has manual lift. The deck is rusted through. It comes with half of a 1000 PTO shaft that does not fit the mower.

Serial number 1107143.

Lot 180:Minneapolis Moline Orchard Transmission and Rear End

Fenders are bent and rusted through. It is equipped with a 540 PTO. Many parts are missing such as steering wheel, gauges, seat pan, right wheel and tire, and much more.

Serial number is 30700041.

Lot 182:Hydraulic Brake

Homemade brake is equipped with 4 hydraulic cylinders. Hydraulic hoses are in poor condition. Power cord is frayed and in poor condition. It measures 25ft long by 6ft wide.

Lot 183:Grill Trailer

Grill trailer has two homemade grills out of tanks. Tires are 185/65R14. Tires are worn and unsure if they hold air. It is equipped with a ball hitch and stand.

Lot 184:Metal Bender

Metal bender turns freely. It measures 26” by 123”. There is heavy rust at the bend point. One of the legs is bent upward. 

Lot 185:Electric Steel Roller

It is equipped with an Allis Chalmers electric motor in unknown condition. Belts are in poor condition. The front bar is bent. It has been welded in various places such as on the rear lever, top of the roller frame, and bottom of the roller frame. The maker cast iron tag is missing. 

Lot 186:(2) Tables

Lot includes two benches with metal top. One measures 30 1/2” wide, 116” long, and 38” tall. The other measures 36” wide, 60” long, and 39” tall. The small one is on wheels. 

Lot 187:(3) Belt Elevator Funnel Bins

All three are fairly straight but all have weld repairs around the funnel. The one without rubber is heavily rusted on the topside of the elevator shute as well as a dent on the bottom side. They are designed for a 16” and two 25” elevator.

Lot 200:Metal Fixture

It measures 41” by 72”. There is heavy rust on the ends as well as the center around the pivot pin holes.

Lot 201:(2) Grapple Parts

Large piece is marked MANN. The large piece has two forks and measures 47” by 27 1/2” by 78”. The small piece measures 31 3/4” by 17 1/4” by 6 3/4”.

Lot 202:Tamper

Lot includes a hydraulic tamper. Hoses are cracked. The tamper plate measures 23 1/2” by 40 1/2” and 1 3/8” thick. Mounting holes are 2 1/4”. 

Lot 203:Platform

Platform measures 33 1/2” wide, 26 1/4”, and is 42” tall.

Lot 204:Grapple

Grapples are 36” wide. Mounting pin holes are 1-1/2” and 4-1/8” apart. Forks have been welded.

Lot 205:Hydraulic Floating Vacuum Pump

Tanks are dented. Hydraulic hoses are cracked. Serial number 81-307N. Hose is 5 1/2”. 

Lot 206:Floating Hydraulic Vacuum Pump

Tanks are fairly straight. The hoses are cracked. Outlet is 9”. 

Lot 207:Hydraulic Vacuum Pump

Outlet measures 11”. The hoses are broken. The top bar has been welded at the base. It measures 50” wide, 96” tall. 

Lot 208:Hydraulic Vacuum Pump

Hoses are cracked. Outlet measures 7 1/2”. It is made by KKERS. It measures 34” by 40” and is 42” tall. Pump is being sold untested. 

Lot 209:Adco 28” Bucket

One tooth is missing. One tooth mount on the edge has been repaired. Mounting holes measure 4 3/4” and 3 1/2”. They are 21 1/4” apart. The 3 1/2” pin holes are egged. The backside of the bucket has been repaired.

Lot 210:18” Scoop Bucket

Bucket has been welded on the bottom side and is cracked on the bottom. 2 3/8” pin holes are 11 1/4” apart. 

Lot 211:33” Bucket

Teeth are in rough condition. Mounting pin holes measure 2 3/4” on the two back and 3 1/2” on the top. Back pin holes are 20” apart and top holes are 21 11/16” apart.

Lot 212:51” Bucket

Teeth have been welded. Mounting pin holes measure 3 1/2” and are 15 1/4” apart. The back corners are bent in.

Lot 214:23” Hensley Bucket

Mounting pin holes measure 3 9/16” and are 12 7/8” apart. Bottom of the bucket has heavy rust. A plate has been added to the teeth. 

Lot 215:32” Sabine Bucket

Mounting pin holes measure 3 1/4” and are 12 1/8” apart. The back of the bucket has been welded. Teeth appear to be in good condition. The bucket is heavily rusted at the bottom. The tag on the bucket says 8300.

Lot 216:21 1/2” Bucket

Teeth are in good condition. There is heavy rust at the top and weld repairs around the mounting pin holes. Mounting pin holes measure 1 3/4” and are 8 3/8” apart. 

Lot 217:114” 10 Tooth Fleco Rake

Teeth have been welded. Mounting pin holes measure 1 3/4” and are 31 7/8” apart. There is heavy rust on the center. 

Lot 218:14” Scoop Bucket

Bottom is rusted. Mounting pin holes measure 2 1/4” and are 11 1/2” apart. The mounting bracket is cracked. No manufacture mark was found. 

Lot 219:59” Hydraulic Bucket

Hydraulic hoses will need replaced. Mounting pin holes measures 2 3/8” and are 11 5/16” apart. 

Lot 220:71” Hydraulic Bucket

Bucket is cracked on one of the bottom corners. The center brace on the bucket is broken as well. Hydraulic hoses will need replaced. Mounting pin holes measure 2 9/16” and are 9” apart. No makers mark was found.

Lot 221:Pallet Forks

They measure 86” wide and 40” tall. Forks are 68” long and 6” wide. Mounting pin holes are 1 3/4” and are 30 3/4” apart. There is heavy rust around the braces. 

Lot 223:120” 9 Fork Scraper

Forks are in good condition. The center mounting holes measure 3 1/16” and are 4 3/8” apart. The bottom mounting holes measure 3” and are 4 5/8” apart. The top plate is bent.

Lot 224:96” Wide Pallet Forks

Pallet forks measures 58” by 7”. The mast is 96” wide and 41 1/2” tall. Center mounting pin hole measures 3 1/8” and are 4 1/4” apart. Bottom mounting pin holes are 2 1/2” and are 5 3/4” apart.

Lot 229:(4) John Deere Suitcase Weights

Casting number R58825D. They are market 47KG. 

Lot 230:(4) John Deere Suitcase Weights

Casting number R58825D. They are market 47KG. 

Lot 231:(4) John Deere Suitcase Weights

Casting number R58825D. They are market 47KG. 

Lot 232:(4) Ford Suitcase Weights

There are no casting numbers on these weights. The bottom mounting brackets are broke on all 4 weights.

Lot 233:(4) Ford Suitcase Weights

There are no visible casting numbers on these weights. All bottom mounting brackets are broken.

Lot 234:(3) John Deere Wheel Weights

Part number T25341.

Lot 235:(3) John Deere Wheel Weights

Casting number is T25341. 

Lot 236:(4) John Deere Wheel Weights

Casting number is T25341. 

Lot 237:(1) John Deere Wheel Weight

Casting number is R56320. 

Lot 238:Broken Suitcase Weight

There is no manufacturer marking. The casting number is 30-3154385. The mounting arms are both broken.

Lot 239:(3) International Harvester Suitcase Weights

All mounting arms are intact. Casting number 383393R1.

Lot 240:(4) John Deere Suitcase Weights

Casting number R58823. All mounting arms are in good condition.

Lot 241:(4) Kubota Suitcase Weights

There are no visible casting numbers.

Lot 242:(3) Aftermarket Suitcase Weights

Casting is marked HC. All mounting arms in good condition.

Lot 243:(3) International Harvester Suitcase Weights

Casting number is 14834701. All mounting arms are in good condition.

Lot 244:(6) Suitcase Weights

Weights are believed to be Case but not confident. No casting numbers were identified. 

Lot 245:(1) Suitcase Weight

Weight appears to be aftermarket for a Minneapolis Moline tractor. Casting number BW 1109 and 1150. 

Lot 246:(4) Minneapolis Moline Suitcase Weights

They are casting 10A24752. The top one has a broken handle on the bottom side. 

Lot 247:(1) Suitcase Weight

Suitcase weight is an aftermarket believed to be for a Minneapolis Moline. Casting number 20-0007856. The top mounting bracket is busted. 

Lot 248:(4) Minneapolis Moline Suitcase Weights

One has a broken top mounting bracket. Another has a broken bottom mounting bracket. Casting number is 10A24132.

Lot 249:(4) Ford Suitcase Weights

Three of the four have a broken bottom mounting bracket. There are no casting numbers.

Lot 250:(4) Kubota Suitcase Weights

There are no visible casting numbers. All mounting brackets are in good condition. 

Lot 251:(4) Small Ford Suitcase Weights

One has a broken top mounting bracket. There are no casting numbers.

Lot 252:(4) John Deere Wheel Weights

Casting number F1592R. 

Lot 253:(4) John Deere Wheel Weights

Casting number F1592R. 

Lot 254:(4) Ford Wheel Weights

Casting number C9NR1A002E. The three bottom in the stack are bolted together. 

Lot 255:(4) Ford Suitcase Weights

There are no casting numbers. 

Lot 256:(4) Ford Suitcase Weights

There are no casting numbers.

Lot 257:(4) Ford Suitcase Weights

There are no casting numbers.

Lot 258:(3) Wheel Weights

Casting number is AM4356.

Lot 259:(3) Wheel Weights

Casting number is AM4356.

Lot 260:(2) Aftermarket Suitcase Weights

Weights have no casting numbers. The handles are at different angles on both. 

Lot 261:(4) Aftermarket Suitcase Weights

There are no casting numbers. All handles are the same direction. 

Lot 262:(4) Aftermarket Suitcase Weights

There are no casting numbers. Handles are at different directions. 

Lot 263:(4) Aftermarket Suitcase Weights

There are no casting numbers. All handles are facing the same way.

Lot 264:(4) Ford Wheel Weights

Casting number is C5NN-1A002.

Lot 265:(5) Ford Wheel Weights

Casting number C9NN-1A002E.

Lot 266:(4) Ford Wheel Weights

Casting number is C8NN-I4002E.

Lot 267:(4) Ford Wheel Weights

Casting number C9NN-1A002E.

Lot 268:(1) Ford Suitcase Weight

Casting number C7NN-3A370-B and 281/68. 

Lot 269:(4) Ford Suitcase Weights

There is no casting numbers. All mounting brackets are in good condition. 

Lot 270:(4) Ford Wheel Weights

Casting number is C9NN-1A002E.

Lot 271:(4) Ford Wheel Weights

Casting number is C9NN-1A002E. 

Lot 272:(4) Ford Wheel Weights

Casting number is C9NN-1A002E.

Lot 273:(4) Ford Wheel Weights

Casting number is C9NN-1A002E.

Lot 274:(2) Minneapolis Moline Wheel Weights

Casting number is FR-652B and 2737X. Patent number 1487257.

Lot 275:(2) Rims

Rims measure 11” by 25”. The bead rings are bent and in poor condition. They are heavily rusted. 

Lot 277:Electric Belt Elevator Semi Trailer

It measures 40‘ long. Tires are 10.00-22 and show weather checking. The entire trailer is heavily rusted. The platform railing is bent. The motor is in unknown condition. Most of the roller wheels are missing and the belt is off and in poor condition. The left jack has been welded. The jack handle is rusted off. Condition of the axle and wheel bearings are unknown.

Lot 279:40FT Step Deck Semi Trailer

Trailer measures 100” wide. It is equipped with a hydraulic winch, brakes, hydraulic dovetail, and 235/75R17.5. Tires are weather checked. The center panel of the dovetail is bent. Lights are untested. Hydraulic cylinders appear to leak. Jacks turn freely. 

Lot 280:(4) Minneapolis Moline Half Wheel Weights

Lot makes a complete set of rear wheel weights. Casting number is 10A24312.

Lot 281:(4) Minneapolis Moline Split Wheel Weights

Lot makes a complete set of weights. Casting number 10A24312.

Lot 282:(2) Ford Wheel Weights

They are branded FoMoCo. Casting number is CONN-A002E.

Lot 283:(4) Minneapolis Moline Rear Wheel Weights

Casting number 10A363.

Lot 284:(2) Wheel Weights

Wheel weights have no casting numbers or manufacturer marks.

Lot 285:(2) EnFo Wheel Weights

Wheel weights are branded Enfo. There is no casting numbers.

Lot 286:(2) Rear Wheel Weights

There is no visible casting numbers or manufacturer markings.

Lot 287:(3) Ford Wheel Weights

Casting numbers are 900E-1076. They are branded FoMoCo.

Lot 288:(2) Wheel Weights

There is no visible casting numbers or manufacturer marks.

Lot 289:(2) Wheel Weights

There is no visible casting numbers or manufacturer markings.

Lot 290:(2) Large Wheel Weights

Wheel weights have no manufacturer or casting numbers.

Lot 291:(2) John Deere 30” Wheel Castings

They measure for a 3 5/8” axle. They are missing the collars. Casting number R35300R.

Lot 292:(4) Wheel Weights

Casting number is CONN 1A002E.

Lot 293:(2) John Deere Wheel Weights

Casting number R32015R. 

Lot 294:(2) JI Case Wheel Weights

Casting number G-1092. 

Lot 295:(5) JI Case Wheel Weights

Casting number C1340

Lot 296:(6) FoMoCo Wheel Weights

All weights are bolted together in a stack. Casting number CTNN-1A002-BBW.

Lot 297:(2) Wheel Weights

There are no visible casting or manufacturer marks. 

Lot 298:(2) M&W 9 Bolt Dual Hubs

Dual hubs are missing collars and all but one U bolts. Casting number 60E. They are for a 3 1/4” axle.

Lot 299:(2) Minneapolis Moline Wheel Centers

Casting number is 10A1372.

Lot 300:(2) Oliver Wheel Centers

Only one has a hub but the hub is missing the collar and u bolts. The casting number on the hub is 16T584A. Casting number on the wheel centers is 166218A. The hub is for a 2 7/8” axle. The wheel centers are 28”.

Lot 301:John Deere Z Wheel Weights

Casting number is not visible.

Lot 302:Oliver / Minneapolis Moline 8 Bolt Dual Hubs

Functional No

In Packaging Yes

Casting number is not legible. Bolt threads are in poor condition. 

Lot 303:34” John Deere Cast Wheel Centers

Casting number JD2 and measures 34”. Most of the rim clamps are there.

Lot 304:(2) Wheel Weights

No casting number or manufacturer marks were found.

Lot 305:(2) Wheel Weights

Casting number is 105300A.

Lot 306:(4) Minneapolis Moline Wheel Weights

Casting number 10A873.

Lot 307:(2) Wheel Weights

There are no visible casting numbers or manufacturer marks.

Lot 308:(2) Ford Suitcase Weights

Both weights have a broken top mount arm. There are no cast numbers.

Lot 309:(2) Wheel Weights

Casting number is 756 111 A.

Lot 310:(2) Taylor Company Wheel Weights

Casting number 301. They are believed to be for a Minneapolis Moline tractor. 

Lot 311:(3) Allis Chalmers Wheel Weights

Casting number AM2795-10.

Lot 312:(2) Allis Chalmers Slab Weights

Slab weights are 8” by 25 3/8”. Casting number AM5816-3.

Lot 313:(2) Wheel Weights

Weights are believed to be for a Farmall B but not confirmed. A sprocket has been added to one of the wheel weights. Casting number is not legible. 

Lot 314:(4) 8 Bolt Wheel Centers

Centers are believed to be for a Ford tractor but not confirmed. They measure 21 1/2”. There are no casting numbers.

Lot 315:(4) FoMoCo Wheel Weights

Casting number CNN-1A002B.

Lot 316:(3) FoMoCo Wheel Weights

Casting number CNN-1A002B.

Lot 317:(2) International Wheel Weights

Casting number is 6818D.

Lot 318:(2) Wheel Weights

There are no visible casting or manufacturer marks. They have a 4 bolt mount.

Lot 319:International Harvester Suitcase Weight bracket

Bracket measures 27 1/4” wide. There are no casting numbers.

Lot 320:(3) Aftermarket Minneapolis Moline Weights

Casting number 20-0007856.

Lot 321:Taylor Foundry Suitcase Weight

Casting number 0100. The top hanging bracket is busted.

Lot 322:(2) Massey Ferguson Suitcase Weights

No casting numbers are visible. Bottom brackets have been cut off. 

Lot 323:(3) Minneapolis Moline Suitcase Weights

Casting number is 10A24132.

Lot 324:(3) Minneapolis Moline Suitcase Weights

There are no casting numbers. All mounting arms are in good condition.

Lot 325:(4) Massey Harris Weights

Casting number 185247M1.

Lot 326:(2) Suitcase Weights

Casting number 30-3154335.

Lot 500:Twin City Stationary Engine

The engine serial number is 68536. T

he engine is stuck. The engine is equipped with a belt pulley. The fuel cap is missing as well as the spark plug wires, radiator cap and flywheel inspection cover. The exhaust manifold is broken and the bottom of the air cleaner is rusted through. The radiator has been repaired and is damaged. The Serial tag is broken off but included.

Lot 501:Minneapolis Moline Stationary Engine

Serial Number: 671465.

The engine is stuck. The unit is equipped with a belt pulley and electric start. The sheet metal appears to be complete and is fairly straight. There is an oil leak on the bottom of the oil pan.

Lot 502:Minneapolis Moline Stationary Engine

Serial Number: 06602296.

The engine is stuck. The unit has electric start. Most of the sheet metal is missing including the radiator. The air cleaner will need replaced. The stand that the engine is on is homemade. The spark plug wires are missing as well. The rear corner of the stand is broken.

Lot 503:Minneapolis Moline Stationary Engine

Serial Number: 03500825.

The engine condition is unknown. The sheet metal is straight but the side shields are missing as well as the spark plug wires. The unit is equipped with electric start and a belt pulley. The exhaust manifold is cracked.

Lot 504:Minneapolis Moline Stationary Engine

Serial Number: 035722.

Engine condition is unknown. Most of the sheet metal is missing. The unit includes electric start and a belt pulley. The spark plug wires are missing as well as the top of the manifold.

Lot 505:Twin City Stationary Engine

Serial Number: 1641038.

The engine is in unknown condition. The manifold is broken and falling of the engine due to the manifold studs being broken off. Most of the sheet metal is missing as well as the magneto and spark plug wires. The radiator fins have damage.

Lot 506:Minneapolis Moline Stationary Engine

Serial Number: 06601289.

Engine condition is unknown. The unit has electric start and a belt pulley. The hood and side shields are missing as well as the spark plug wires. The valve covers are all loose.

Lot 507:Minneapolis Moline Stationary Engine

Serial Number: 16400676.

The engine condition is unknown. The unit is missing several pieces including the starter, fuel pump, flywheel. 

Lot 508:Allis Chalmers Engine

Serial Number: 4035538.

Engine condition is unknown. The unit appears to be fairly complete but is missing the flywheel. The starter is off but is included. The bottom of the oil pan is leaking out of the drain plug fitting.

Lot 509:Minneapolis Moline Stationary Engine

Serial Number: 03504104.

Engine condition is unknown. The unit has electric start and a belt pulley. The exhaust manifold has a crack in it. The magneto and plug wires are missing.

Lot 510:Minneapolis Moline Stationary Engine

The Serial Number tag is missing. The engine condition is unknown. The unit is missing the exhaust manifold, starter, magneto and plug wires. 

Lot 511:Caterpillar Stationary Engine

Serial Number: 66D8157.

Engine is in Unknown condition. The stand that the engine is on appears to be homemade. The front grill shroud has rust holes in it. The lid for the air cleaner is missing. The exhaust elbow has had a repair on it. 

Lot 512:Minneapolis Moline 110

Serial Number: 26600536.

Engine is free. The sheet metal is in good condition. All of the tires will need replaced. The right side transmission cover is bent. 

Lot 514:Minneapolis Moline 110

Serial Number: 820311.

Engine is free. All of the tires will need replaced as well as the rear rims. The sheet metal is decent but has rot in some spots. The seat will need replaced. The machine has a front weight bracket.

Lot 515:Minneapolis Moline 112 Hydro

Serial Number: 820413.

Engine is stuck. All of the tires will need replaced. The engine has been dismantled. Has front wheel weights.

Lot 516:Minneapolis Moline Garden Tractor

The Serial Number cannot be made out and the engine condition is unknown. The deck is 48 inches wide. The front tires will need replaced as well as the rear tires. The seat cushion and front grill are missing.

Lot 517:Minneapolis Moline Garden Tractor

The Serial tag is missing. The engine is free. The sheet metal is decent. The seat cushions are missing as well as the fuel tank. The rear tires are 6-12 Firestone and show heavy wear. The front tires are 4.00-8 and will need replaced. The deck is 36 inches wide.

Lot 518:5 Lawn Mower Decks

4 Minneapolis Moline and 1 white mower decks. The 4 Moline decks are worn out and will need rebuilt. The white deck will need new pulleys and bearings as well.

Lot 519:Minneapolis Moline Stationary Engine

The Serial Number is hard to read due to the tag being painted over. The engine condition is unknown. The sheet metal is straight but is missing the side shields. The unit is equipped with electric start and belt pulley. The engine oil fill cap is missing.

Lot 520:Minneapolis Moline Stationary Engine

Serial Number: 21000325.

The engine is in unknown condition. The hood is missing. The unit has a belt pulley and electric start. The distributor has been taken apart and the belt pulley has been broken.

Lot 521:Caterpillar Engine

Serial Number: 66D33883.

Engine condition is unknown. The engine is missing the starter but has the turbo, manifold and fuel pump.

Lot 522:Minneapolis Moline Engine

Serial Number: 15500829.

The Engine is stuck. The unit is missing the starter and carburetor. The manifold is cracked and broken as well as the fan pulley.

Lot 523:Minneapolis Moline Stationary Engine

Serial Number: 21000058.

Engine condition is unknown. The unit is missing several parts including the radiator, starter, water pump and fan assembly and generator. This is a parts unit.

Lot 524:Minneapolis Moline Stationary Engine

The Serial Number tag is missing. The engine condition is unknown. The hood and side shields are missing. The radiator shroud is rusted. The unit has the starter and fuel pump. 

Lot 525:Cummins Engine

Serial Number: 34524490. 

Engine condition is unknown. The starter and flywheel are missing. The valve cover has been taken off at one time and the bolts are loose. The engine is on a homemade stand.

Lot 526:Caterpillar Engine

The Serial tag is missing. The engine condition is unknown. The unit comes with a few extra parts. The starter is missing. The engine has the fuel pump and flywheel. 

Lot 527:6 Cylinder Detroit Diesel

Engine is stuck. It is missing a large amount of parts such as inspection cover, injection pump, and more. It is sitting on a stand. The plate on the valve cover is missing. 

Lot 528:Caterpillar 1673 Diesel Engine with Transmission

Engine is free. The condition of the engine and transmission are unknown. Engine appears to be complete. Hoses are cracked and will need replaced. The glass on the fuel pressure gauge is cracked. Engine tag has been painted over and number is illegible. Transmission model and manufacturer is unknown. Transmission tag says 3320037 and 18827-F-1.

Lot 529:Caterpillar 3208 Diesel Engine

Engine is stuck. The condition of the engine is unknown. It is unknown of the engine is complete. The paint is flaking off of the valve covers. The injection pump is mounted and appears to be complete. Belt and fan is missing. 

Lot 530:Generator with 4 Cylinder Perkins

Engine is believed to be a 4-236 but not confirmed. The condition of the engine and generator are unknown. The fuel filter body is missing as well as the starter and possibly more. Tachometer reads 68.3 hours the back of the generator is missing.

 Block number LD22778U819288J.

Lot 531:Yanmar 3 Cylinder Diesel Engine

Engine is believed to be stuck. The condition of the engine is unknown. It is currently on a wooden stand on metal mounts. Engine appears to be complete.

Engine serial number is 15986.

Lot 532:Minneapolis Moline 605A LP Engine

Engine is loose. The condition of the engine is unknown. It has an American Bosch magneto. Hobbs tachometer reads 491.1 hours. The sheet metal is missing.

Engine serial number 03505045.

Lot 533:V6 Detroit Diesel and Automatic Transmission

The condition of the engine and transmission are unknown. It is equipped with a hydraulic pump off the transmission. The injection pump is missing.

Engine number 6VA108375. 

Lot 534:Twin City GEU Stationary Engine

Engine is stuck. It is equipped with a Fairbanks Morse magneto and 13 1/2” belt pulley.

Engine serial number is 4241.

Lot 535:Caterpillar 3150 Diesel Engine

Engine is believed to be stuck. The condition of the engine is unknown. The right exhaust manifold is missing. The water pump and fan are missing and possibly more.

Engine serial number is 97M3537.

Lot 536:Caterpillar V8 Diesel Engine and Automatic Transmission

Engine is believed to be either a 3208 or 3150 Caterpillar engine but not confirmed. The condition of the engine and transmission are unknown. Belts are missing as well as a serial tag. 

Lot 537:6BT 359 5.9 Cummins Diesel Engine

Engine is in unknown condition. It appears to be fairly complete.

Engine serial number is 21038111. 

Lot 538:Minneapolis Moline 6 Cylinder LP Stationary Engine

Engine is believed to be stuck. It is equipped with a turbo. It is on a metal stand. It appears to be fairly complete. Engine model number D800A-6A.

Engine serial number 34905497.

Lot 539:3-71 GM Diesel

Engine is believed to be stuck. It appears to be fairly complete. Hoses are cracked. Serial tag appears to be missing.

Lot 540:Cummins 6 Cylinder Diesel Engine

Engine is free. The condition of the engine is unknown. Engine is not complete, parts such as the starter are missing.  Fan blades are bent. Hoses are cracked. Engine serial tag was not found.

Lot 541:GMC V6 Gas Engine and Transmission

Engine is stuck. It is equipped with an updraft carburetor. The oil fill cap is missing as well as the fan, and possibly more.

Engine serial number is 35I-032180.

Lot 542:Massey Ferguson/Minneapolis Moline D504-6 Diesel Engine

Engine is free. It is missing the starter, fan, and possibly more. It is equipped with a Rosa Master injection pump. The flywheel is missing.

Engine serial number is 23703586.

Lot 543:Minneapolis Moline 4 Cylinder LP Engine

Condition of the engine and transmission are unknown. It is missing the hood, radiator cap, distributor, belt, and more. The backside sheet metal is bent. Clutch lever is stuck.

Engine serial number is 31600373.

Lot 544:Caterpillar 3604 Diesel

The condition of the engine is unknown. A few of the fan blades are cracked. It appears to be fairly complete but is missing the fuel filter body and belts. Alternator is froze.

Engine serial number 61 K06138.

Lot 545:Minneapolis Moline Power Unit

Engine is stuck. It is missing the hood, engine tag, distributor, radiator cap, and more. The backside sheet metal is bent. The clutch lever is stuck.

Lot 546:Minneapolis Moline Power Unit

Engine is stuck. The clutch lever moves. The pressure gauge glass is cracked. It is missing multiple parts such as hoses, starter, fan, belts, and more. It is sitting on a stand. Serial tag is missing.

Lot 547:Minneapolis Moline D800A-6A Stationary Engine

Engine is stuck. Engine appears to be fairly complete. It is in a homemade stand. The tank cap is missing. Clutch lever moves freely.

Engine serial number is 34900933.

Lot 548:Minneapolis Moline Twin City Stationary Engine

Engine is stuck as well as the clutch engagement handle. The hood is missing. The radiator shroud is busted. The radiator has a large gouge in the front. It is equipped with two Carburetors. The manifold is cracked. The generator belt is missing as well as the upper radiator hose. It is on an homemade stand. Engine serial number is 0254800469.

Lot 549:Minneapolis Moline 800-6A LP Stationary Engine.

Engine is stuck. The clutch handle moves. The  side panels are missing. The hood is fairly straight but doesn’t want to bend on the hinge. The backside is dented. The gauge panel is bent.

The engine serial number is 06603226.

Lot 550:Detroit V6 Diesel Engine

Engine is stuck. The condition of the engine is unknown. The right hand manifold has a rust hole. The left tube to the turbo is missing. Engine tag is missing. 

Lot 551:Minneapolis Moline 336A Engine

Engine is stuck. It is missing parts such as the manifold, belt, fan, starter, and more. The valve cover caps are missing.

The engine serial number is 1690175J.

Lot 552:GM 3-71 Diesel Engine

Engine is stuck. The serial tag is missing as well as the manifold. There is no stand on the backside. 

Lot 553:Large Diesel Engine

Engine is stuck. The casting number on the block is 34551969. The front belt is missing. The valve cover is cracked. It is sitting on a homemade frame.

Lot 554:50KW Coleman Portable Generator

The condition of the engine and generator are unknown. It is powered by a 4BT Cummins. The top generator door latch is broken. Tires are 6.70-15LT and in poor condition as there are cracked on the sidewalls. The insulation on the doors are ripped. The fenders are rusted through. It is equipped with a spindle hitch but no jack.

Serial number 389578.

Lot 555:Ingersoll Rand 185 Generator

Engine is a John Deere 4 cylinder diesel. The condition of the engine is unknown. Tires are S1205/75R15. Tires are in good condition. Lights are not tested. Tachometer reads 856.6 hours. It is equipped with a pintle hitch and jack.

Engine serial number is CD4039D265445. Generator serial number is 265022UDG327. 

Lot 556:M&W Dynometer

Dyno is being sold untested. The top panel is missing. It runs off of 540 PTO. Tires are L78-15. Tires are in poor condition. Gauge glass is intact. The PTO shield is off and bent. The serial tag is there but illegible. 

Lot 557:Various Tractor Parts

Lot includes a radiator, Minneapolis Moline oil pan and hood, and John Deere seat frame. The seat frame is busted at the bottom. The hood is cut. 

Lot 558:(2) Minneapolis Moline Front Wheel Weights

Casting number is 10A1134. 

Lot 559:(2) Minneapolis Moline Front Wheel Weights

Casting number is 10A1134.

Lot 560:(2) Front Wheel Weights

Weights are painted orange and have mounting bolts. There are no casting numbers.

Lot 561:(1) Aftermarket Front Wheel Weight

Weight is identical shape of the ones on lot 558 and 559 but have no casting numbers. They are believed to fit a Minneapolis Moline.

Lot 562:(3) Davis Suitcase Weights

Two are painted yellow and one is painted red.  Casting number is 182386.

Lot 563:(2) Minneapolis Moline Suitcase Weights

The white weight bottom bracket is broke. Weight casting number is 10A2413R.

Lot 564:(5) 20KG JD Weights

Weights are different colors with paint chipping. Casting number R66949.

Lot 565:(7) M&M Suitcase Weights

They are marked CIK. 

Lot 566:Minneapolis Moline Hydraulic Fluid Can & (2) Hats

The can is empty and has the lid. Both hats are in used condition. 

Lot 567:Nautical Items

Lot includes 3 propellers, two anchors, and one large clevis. The two smaller propellers are the same size. 

Lot 568:Minneapolis Moline Parts Binder Holder

It measures 17” wide, 5 1/2” tall, and 11 3/4” long. It has three page binders included.

Lot 569:H&P Light

All glass panels are chipped. The top hinges freely and the bulb is there. Wiring has been cut. Bottom plate says 6860.

Lot 570:(2) Weather Vanes

One is missing the top ornament. The other is deconstructed. The one that is together turns freely.

Lot 571:Colombian Vice and Homemade Railroad Iron Anvil

Homemade railroad iron anvil measures 19 1/2” long. A handle has been welded to the side. The vice handles are bent but turns freely. Vice jaws are damaged. 

Lot 572:(3) Vices

Lot contains one Yost bench vice and two machinist vices. The large machinist vice is a Dayton. The small machinist vice is stuck. 

Lot 573:(12) Mufflers

All are in used condition. They are for a large variety of equipment. Pipes are 2 1/2”, 2 3/4”, 2”, and 3”. They vary in length from 17” up to 47”.

Lot 574:(3) Tow Straps

3” wide straps are used. They measure 15’ long. Weight ratings are unknown.

Lot 575:Minneapolis-Moline Wooden Parts Crate

Early parts crate with “From Minneapolis-Moline Company” painted on the side of it. The wood has damage near the hinge for the door but the item displays well. Crate measures 36” wide, 23” long, and 16” tall. Still has paper tag attached to the top.

Lot 576:John Deere Injection Pump

Pump was made by Bosch for John Deere, the Deere part number is RE18947. This appears to have been rebuilt but actually condition is unknown. 

Lot 576A:Bosch Injection Pump

Bosch 8 cylinder injection pump. Pump looks to have been rebuilt some time ago but actual condition is unknown. 

Lot 577:(2) Galaxy Rear Tires

Tire size is 14.9-38. Tire tread is in like new condition but tires do have some cracking on the sidewalls. 

Lot 578:(2) Minneapolis-Moline Fenders

Included is a set of fenders with mounts and a few sheet metal pieces. The sheet metal is from several different models. The fender fitment is unknown. Fenders have some dents and bends and rust holes in the middle of them.

Lot 579:(4) Minneapolis Moline Fuel Tanks

Lot contains 4 fuel tanks for Minneapolis Moline tractors. Three are missing fuel caps. The large tank has a rust hole on the front side. The short round tank is rusted through at the bottom. The long round tank has a repaired fuel neck. The long tank measures 31 1/2” and is 15 3/4” tall. The long round tank measures 30 1/2” long and 14” tall. The short round tank measures 25” long and 14” tall. The square tank measures 18 1/2” long, 14 1/2” wide, and 13” tall. 

Lot 580:Minneapolis-Moline G708 Pedal Tractor

The body looks to be in good condition but the paint is peeling. The front end and rear wheels have been removed but are included. It would make a great restoration candidate! 

Lot 581:Magnetos and Distributors

Various manufacturers such as Fairbanks, Bosch, and International Harvester. Working condition is unknown on them.

Lot 582:(15) Carburetors

Manufacturers include Ensign, Stromberg, Impco, Zenith, and Bendix. Carburetors are in various stages. Some are complete and some are not. Adjustments turn freely on most carburetors.

Lot 583:Scale, Ice Tongs, Drill Press, and More

Lot contains various items such as a platform scale with bowl, hook, drill press, ice tongs, and anchor. The drill press turns freely. The scale does not appear to be complete. 

Lot 584:Miscellaneous Minneapolis Moline Parts

Lot includes a radiator, two steering wheels. Homemade battery box, hood, and four jugs. The jugs are stamped RE101-A on two. The other two are 10A10248. One of them has a piston stuck inside. They appear to be in good condition. The hood is in poor condition. The steering wheel coatings are cracked and frames are rusted. Lot also includes a pump.

Lot 585:Pistons, PVC Pipe, and More

Lot contains a large variety of stuff such as three push mower decks, 2” PVC pipe and fittings, General Electric Motor, alternator, jack,  pistons, and more. Pistons measure 4 3/8” by 3 1/2”. Large battery box is in good condition. 

Lot 586:Starters, Beacon, Carburetors, and More

Lot includes various items such as GM Valve cover, gas can, shears, starters, beacon, alternator, PTO cover, and much more. The carburetors are both Sheblers. The gas can does not have a spout. The jack is missing the handle. 

Lot 587:Miscellaneous Items

Lot includes air hoses, fuel tank, top link, drawbar, radiator, water pump,and more. The fuel tank measures 22” by 17 1/2”. The fuel cap is missing. The drawbar is 2 1/2” wide. 

Lot 588:(7) Stands, (1) Pump, and (1) Winch

Winch is untested. The stands are on 12” by 12” plates and are adjustable in height. The pump is number 9L536.

Lot 589:John Deere 830 Nose Cone

The bottom has dents in it but the top and sides are fairly straight. The grille has dents and a few rips in it. The top of the nose cone has some rust pitting. 

Lot 590:Minneapolis-Moline Hood and Shields

Fitment of these sheet metal parts are unknown. The hood has some dings and crinkles in it. The pto shields are in good shape but the large one is bent. The grille screens are for a 5 Star and look decent, a few have some damage in the lower corner. 

Lot 590A:Minneapolis-Moline Hood and Grilles

Exact fitment is unknown but the hood is fairly straight. The lower sections of the hood where the latches are is slightly bent. The grilles are pretty decent, they do have some elongated bolt holes. The grilles are believed to be for a UB special.

Lot 591:Oliver Sheet Metal

Included is a set of two piece grilles, one layer grille, and a side shield. One of the two piece grille panels has been cut and modified. The side shield is straight and looks solid. The later grille is straight and in good shape. 

Lot 592:Minneapolis-Moline Sheet Metal

Fitment of these parts is unknown except for the set of side shields for a JetStar 3. The hood is fairly straight but it does have a rust hole at the back on top. The grille is straight as well but it does have tear in the lower right corner. The battery cover is in good shape. The JetStar 3 side panels are in decent shape but one has surface rust.

Lot 593:Minneapolis-Moline Hood Pieces

The upper hood portion is believed to be from a 445, it is fairly straight but someone has welded a a mount on the top side. The side panel fitment is unknown and it has a large cut out of the top side of the rear.

Lot 594:Minneapolis-Moline Hoods and Bubble Nose

The bubble nose is in great shape, it only has a small chip out of the rear flange. Both hoods are in good shape and are fairly straight. One has a small bend on the rear left corner. One has a badge that is peeling off.

Lot 595:(2) Fuel Tanks

One looks to have been repainted but it has rust on the inside, it also comes with a glass sediment bowl. The other tank is missing the fuel cap and it has heavy rust on the inside and on the bottom of the tank. Fitment is unknown on both tanks.

Lot 596:Minneapolis Moline Sheet Metal and Radiator

The grille is believed to be for a Minneapolis Moline R. There is heavy rust on the bottom of the grille. The side emblems are believed to fit a G series tractor such as a G1000 Vista. The grilles are in good condition. The radiator measures 22 1/2” by 17 3/4”. 

Lot 597:Minneapolis Moline U or R Side Panels and Grille

The grille is straight as well as the side panels. The side panels measure 43” by 21”. The grille is 21” by 20”. 

Lot 598:Minneapolis Moline Sheet Metal

Lot includes a pair of grille panels, two pairs of brake covers, and a model Z hood. The hood is fairly straight but does have rust damage. The grille panels measure 16 1/4” by 10”. 

Lot 599:Minneapolis Moline Sheet Metal and Emblems

Emblems are believed to be for for a Jet Star 3. One nose has the screen included. Good condition. The hood is believed to be for a model U.

Lot 600:Minneapolis-Moline Hood and Door

Hood fitment is unknown but it came from a propane tractor. The hood is pretty straight and solid, there is some surface rust at the front. The cab door has surface rust at the bottom but is in good condition. The glass is intact and the handle works as it should.

Lot 601:Minneapolis-Moline Parts

Included is a hood, air intake, seat frame, and hood sections. The hood has heavy rust damage on the left side. The intake and seat frame have surface rust but appear to be in good shape. There is a side shield from a G705 that is in decent shape. The last hood section has unknown fitment but is fairly straight. 

Lot 602:2 Ton Walker Engine Hoist

Cylinder moves freely. It had been reinforced and welded on the tower and legs. It is equipped with an 8 ton cylinder.

Serial number E315H12151.

Lot 603:Walking Planter and United Welding Bed Rail Box

Box measures 60” by 11 1/4”. The latch latches. The Earthway seeder is a model 1001B. It is equipped with a seed plate.

Lot 604:Minneapolis Moline G900 Diesel Sheet Metal

Lot includes a set of hoods. The hoods are fairly straight and have proper badging. Hood panels are equipped with latches. Sheet metal does have some rust damage. 

Lot 605:6 Cylinder Crankshaft in Crate

Tag on the crank reads A263. The crankshaft is also marked Cummins. It measures 42 1/2”.

Lot 606:(2) Radiators, (1) Grille, and (1) P10 Back Panel

Fenders believed to be a set for a model Z. Both fenders are dented and have been repaired. The tall radiator has damage on the bottom of the core. The large radiator measures 33” by 20”. The small radiator measures 27 1/2” by 19 1/4”. The grille screens are missing the badging. The back panel for a P10 is dented on the left hand side. The tag reads 400102-10030.

Lot 607:Minneapolis-Moline Hoods and Fuel Tank

One hood is for a G model and it is straight and in good shape other than several of the holes have been enlarged and there is a cutout at the back. The other hood has unknown fitment, it is straight and solid. The fuel tank is missing the cap and has surface rust inside and out.

Lot 608:Minneapolis-Moline Hood

The hood is straight and in good shape, some of the paint is scratched. Also included are two large side shields that could’ve been used for a pulling tractor or a cab. 

Lot 609:Minneapolis-Moline Radiators

Both are in unknown condition, the cores look to be in good shape. Both housings have rust holes in them. The fitment for these is unknown.

Lot 610:Clamshell Fenders

Both fenders have dings but they appear to be solid. They have both been cut and modified at the bottom near the mount. The mounts have been welded on to them. 

Lot 611:(13) Minneapolis Moline Heads

Various heads are in unknown condition. Six are equipped with valves and valve springs. Part numbers include 10A4203, 10A4206, 10A4210, 10A238, and 10A30490.

Lot 612:(12) Minneapolis Moline Heads

All heads are in unknown condition. Five have complete valves and valve springs. Part numbers include 10A23134, 10A4222, 10A4204, 10A4214, and 10A5851A.

Lot 613:(2) Dual Adapters

Large cast hubs that go from a 10 bolt rim to a 9 bolt center.

Lot 614:Crankshaft

Crankshaft for a 6 cylinder engine. Fitment is unknown but it does have part number 4N7696. The journals have surface rust.

Lot 615:Hydraulic Cylinders

Two hydraulic cylinders that are in unknown working condition. The hoses are cracked and will need replaced. 

Lot 616:Drill Press

Drill press is being sold untested. All handles are missing. The drill press and stand is 58” tall, 27” wide, and 27” deep.

Serial number is 81134.

Lot 617:(2) Racks and Contents

Lot contains a large variety of parts such as turbos, wheel hubs, flywheel, fender, hoods, grill, tanks, Minneapolis Moline jugs, starters, floor pan, and more. Buyer must take all. 

Lot 618:(2) Racks and Contents

Lot includes pistons, radiator, gas tank, engine block, brakes, carburetors, injection pumps, Minneapolis Moline jugs, crankshaft, air cleaner, head, and more. Buyer must take all.

Lot 619:(2) Racks and Contents

Lot includes fenders, cam shafts, nose pieces, starters, fuel tank, tires, manifold, steps, engine block, front end, Minneapolis Moline jugs, gauges, and more. Buyer must take all items.

Lot 620:(2) Racks and Contents

Lot includes a belt pulley, engine block, starters, hoods, Minneapolis Moline jugs, radiator, tank, valve covers, and more. Buyer must take all items. 

Lot 621:Miscellaneous Items

Lot includes tires, engine block with crankshaft, ladder, muffler, and much more. Some tires are in good condition while others are in poor condition. The tire with the spoke wheel is 7.50-18. The other implement tire in good condition is 12.5L-16SL. Buyer must take all items.

Lot 622:(2) Racks and Contents

Lot includes steps, heads, Minneapolis Moline jugs, cam shafts, manifolds, and more. Buyer must take all items. 

Lot 623:(2) Racks and Contents

Lot includes lp tank, wheel weight, seat pan, rocker arms, crank and camshafts, grille panel, generator, mufflers, and more. Buyers must take all items. 

Lot 624:(1) Rack and Contents

Rack includes Minneapolis Moline jugs, heads, sleeves, pistons, starter, valve covers, and more. Buyer must take all items.

Lot 625:(2) Racks and Contents

Lot includes flywheels, cam shafts, valve covers, heads, rods, grille, seat mounting bracket. Buyer must take all items. 

Lot 626:(2) Racks and Contents

Lot includes Minneapolis Moline jugs, heads, seat pan, radiator, Oliver grille panels, air cleaner, manifold, magneto, scale, and more. Buyer must take all items.

Lot 627:Contents of Section

Lot includes a Duracraft drill press, weight lifting bench, pipe stands, manifolds, haters, table leg, tank, Atlantic Machinery, milling machine, and more. Tools have not been tested. Buyer must take all items.

Lot 628:Contents of Section

Lot includes a Minneapolis Moline fender, Mosler safe, cultivator parts, Lincoln welder, air cleaners, and much more. The safe measures 25 1/4” by 27 3/4” and is 60 3/4” tall. The welder is being sold untested. Buyer must take all items. 

Lot 629:(5) Engine Blocks

Blocks are for Minneapolis Moline and Massey Ferguson tractors. The lot includes blocks for Massey Ferguson D504-6, Minneapolis Moline 425A-6, and other Minneapolis Moline engines. 

Lot 629A:(3) Detroit 6 Cylinder Diesel Engine Parts

Lot includes all three blocks. One has the oil pan while the other two do not. All three are stuck. 

Lot 630:Contents of Shelves

Lot includes the contents of the shelves. The shelving does not come with the lot. Lot includes Maytag washing machine, Oliver grille panels, valve covers, copper wire, manuals, grille screens, pistons, phones, single and double trees, RC boat and remote, seat cushions, and more. Buyer must take all items.

Lot 631:Contents of Corner

Lot includes jack stands, radiator, tank, hand planter, chrome stacks, gears, lanterns, wiring, wrenches, sockets, breaker bar, hose reel, saw, diamond plating, table, electric winch, and more. The shelving and peg board does not come with the lot. Buyer must take all items. 

Lot 633:Large Parts Lot

This listing is for the items on the shelving, the shelving is not included. Some items include several hood sections, an oil pan, fuel tank, blocks, fenders, and more.

Lot 634:Large Parts Lot

The the contents of the shelves and the few items that are taped off in front of the shelving are included. Included is a Kawasaki FE350 engine (condition unknown), a clamshell fender, transmission gears, pistons, rods, a rocking horse, and several Minneapolis-Moline parts.

Lot 635:Large Parts Lot

Included are items on the shelving, the shelving is not included. Some of the items are three radiators, parts to a 6 cylinder engine, a few heads, an air compressor, and intake parts. 

Lot 636:(2) Pallets of Minneapolis Moline Parts

Lot includes a Minneapolis Moline grill, two heads, fender, Jet Star 3 super hood, steering column, shifter, manifold, air cleaner, and more.

Lot 637:Contents of Table

Lot includes various fishing reels, hose clamps, starter ring, and umbrella brackets, some umbrella brackets have rust damage. Hose clamps are new in box. Buyer must take all items.

Lot 638:Minneapolis Moline Fenders

Both fenders are fairly straight except for a small dent on the side rail of one fender. The mounting brackets are mounted to the fenders. 

Lot 639:Minneapolis Moline Dashes and Shield

Shield is fairly straight. One gauge cluster light cover is bent while the other is straight. One dash has a set of intact gauge glass while the other one is all busted. 

Lot 640:(3) Minneapolis Moline 10A10248 Cylinder Blocks

All cylinder blocks are part number 10A10248. One has G1000 on the side. One has no head bolts.

Lot 641:(2) Minneapolis Moline 10A5851A Heads

Head set are mounted together. They are marked 10A5851A. One manifold bolt is missing. There are no visible cracks or breaks in the casting.

Lot 642:(3) Minneapolis Moline 10A4214 Diesel Heads

They are marked 10A4214. One is missing a set of valves and valve springs. There are no visible cracks in the casting. 

Lot 643:(2) Minneapolis Moline 10A4229 Heads

Heads are marked 10A4229. They are both missing all valves and valve springs. There appears to be no visible cracks. 

Lot 644:(2) Minneapolis Moline 10A4229 Heads

Heads are marked 10A4229. One head is missing valves and valve springs. There appears to be no visible cracks.

Lot 645:(3) Minneapolis Moline 10A29559 Diesel Heads

Casting number 10A29559. There appears to be no visible breaks in the castings. All include injectors. 

Lot 646:Large Grille

The grille is straight. It has an auctioneers sticker on the bottom center. 

Lot 647:(3) Minneapolis Moline Heads

Two heads are GE30E and one is 10A4209. The GE30E heads are missing valves and valve springs. There appears to be no visible breaks in the castings.

Lot 648:(2) Minneapolis Moline RE-226C Heads

There appears to be no visible breaks in the casting. One is repainted.

Lot 649:(2) Minneapolis Moline 10A4212 Heads

Heads are missing valves and valve springs. They both appear to be crack free. 

Lot 650:(2) Minneapolis Moline 10A4212 Heads

Both heads are missing valves and valve springs. They both appear to be crack and weld free.

Lot 651:Minneapolis Moline Fiberglass Hood Set

Hood is believed to be for a 335 or 445 but not confirmed. The hood center plate is missing one of the covers on the left side near the front. All are straight.

Lot 652:Minneapolis Moline Fiberglass Oilpan

It is new and straight. There are no part numbers. It comes with box.

Lot 653:Minneapolis Moline Fiberglass Transmission Cover

The proper fitment is unknown. It appears to be unused. It is straight and includes box. 

Lot 654:Minneapolis Moline Hood Set

Hood set is believed to be for either a 335 or 445 but not confirmed. The center plate is heavily pitted on the bottom side. Side panels are egged out around the mount holes.

Lot 655:Minneapolis Moline Fiberglass Hood Set

Hood set is believed to be for either a 335 or 445 but not confirmed. All pieces are straight. 

Lot 656:(2) Minneapolis Moline 10A150A Cylinder Blocks

Both cylinder blocks are marked 10A150A. Both show no visible cracks or welds. 

Lot 657:(2) Minneapolis Moline 10A13562 and (1) 10A8199 Cylinder Blocks

One of the 10A13562 cylinder blocks has a hairline crack along the side close to the top face. The other two appear to be crack and weld free.

Lot 658:(2) Minneapolis Moline 10A5855A Heads

Heads are 10A5855A. They have new valves and have been faced. Both appear to be crack and weld free. 

Lot 659:(2) Minneapolis Moline 10A5850A Heads

Heads are 10A5850A. One has a broken rocker arm mount bolt. Both appear to be crack and weld free. 

Lot 660:(2) Minneapolis Moline 10A5850A Heads

Both heads are 10A5850A. Both appear to be crack free. Both have a rocker arm bolt broke at the base. They both appear to the crack and weld free.

Lot 661:Miscellaneous Pistons, Rings, and Rods

Part numbers on pistons include 5265, 83, 10A3650, 10A21130, GM5132514M, and more. All are in various dates as some have rings and wrist pins while some have neither.

Lot 662:Minneapolis Moline Side Panels

Both panels have damage on the frontside such as a dent on the left panel and a crack on the right panel. Otherwise, both panels are fairly straight. 

Lot 663:Massey Harris Grille

There is a large dent on the bottom left corner. All of the bars are straight.

Lot 664:Massey Ferguson Grille Panels

Both of the screens are dented. One of the panels has a cut along the side. 

Lot 665:Minneapolis Moline Hood

The hood is missing one of the side panel latches. The nose is crinkled. The left side panel has a piece cut and bent upwards.

Lot 666:Minneapolis Moline Grille

The grille frame as well as all of the bars are straight. The frontside has been painted black.

Lot 667:Minneapolis Moline U Row Crop Grille

All of the bars are straight. The right side panel has a minor tweak at the top.

Lot 668:Fuel Tank

The tank is fairly rusty on the inside. The bottom valve turns freely. There is a dent on one side.

Lot 669:Fenders and Air Cleaner Bowl

The air cleaner bowl is in good condition. Fenders are fairly straight and bolted together. They do not include mounts.

Lot 670:Grille

Grille is believed to be for a John Deere lawn mower but not confirmed. The panel is straight. 

Lot 671:Minneapolis Moline Nose

The nose is straight and includes proper badging. The screen is in good shape.

Lot 672:Grille Parts

Lot includes two screens and one side panel. The older Minneapolis Moline screen has some damaged bars.

Lot 673:Massey Ferguson 97 Hood

The hood is straight. It is equipped with front light brackets. 

Lot 674:Massey Ferguson 97 Hood

The hood is straight. It is equipped with front light brackets. 

Lot 675:JI Case Hood

The hood has body filler cracks on the topside and a rust hole on the left side.

Lot 676:JI Case Hood

The hood has heavy body filler on the inside. Otherwise, the hood is fairly straight.

Lot 677:Minneapolis Moline Fiberglass Hood Set

The top hood panel is missing a cover on the left side. Panels are straight.

Lot 678:Minneapolis Moline Grille

The frame and bars are straight. The outside has been repainted. 

Lot 679:Minneapolis Moline Hood

Hood and side panels are fairly straight. It is missing three of the four side panel latches.

Lot 680:John Deere Two Cylinder 30 Series Steering Wheel and Step

Steering wheel is in like new condition. The step includes mounting bracket. 

Lot 681:Minneapolis Moline Hood Set

All panels show heavy rust damage dents. The left side panel is rusted through at the top.

Lot 682:Minneapolis Moline Jet Star 2 Side Panels

Panels are fairly straight and have and older repaint. 

Lot 683:(2) Minneapolis Moline Emblems

Both emblems are straight with glue residue on the backside.

Lot 684:Minneapolis Moline Fiberglass Oil Pan Mold

There are no visible part numbers. It is cracked on the side. 

Lot 685:Minneapolis Moline Fiberglass Grille

It has not been cut. It is still in the box.

Lot 686:John Deere Gauges

Included are two ammeter gauges, an oil pressure gauge, and a water temperature gauge.

Lot 687:Carburetor Parts

Assorted used carburetor parts.

Lot 688:Pistons

Various pistons and a few piston rods are included.

Lot 689:Distributors

Several different used distributors, working condition is unknown.

Lot 690:Minneapolis Moline, New Regrind Camshaft (Crane Cams)

Minneapolis Moline Camshaft (6-Cyl, Crane Cams -New Regrind), core #10A9042.

Attached is the camshaft grind sheet. Shows some surface rust. 

Lot 691:Minneapolis Moline New Regrind Camshaft (6-cylinder)

Minneapolis Moline New Regrind Camshaft (6-cylinder),, core #10A24044, surface rust and significant rust on 1 bearing surface, no Cam specification is available, other than the cam was reground by “Hoosier Regrinding”. See images.

Lot 692:Minneapolis Moline Regrind Cam Shaft (6-Cylinder)

Minneapolis Moline Regrind Cam Shaft for a 6 -Cylinder. No specifications available, and no core casting numbers.

Lot 909:Large Boat Tiara 41' with 3208 Cat Engines

This vessel is equipped with two 3208 Caterpillar diesel engines, engines are in unknown working condition. Boat has living quarters with kitchen area with a microwave and sink, shower, and toilet. The interior is fairly rough. The boat floor is rotten. There is a mirror on the back of the living quarters. The top cover is in rough condition. Engines hours are not displayed. Propellers are missing. The wiring in the roof has been pulled. Some parts have been removed as shown in the photos. Buyer is responsible for removal. Dimensions are 44ft long by 176” wide by 14ft tall.

Lot 912:B GMG British Clearing No. 150-8 Brake

Item is in unknown condition. A piece has been added to the cutter bar. There is a crack on the backside of the gear case. The backside of the top of the brake is heavily rusted. One of the metal sheet supports is bent. It has a capacity of 8’ wide. Tag is on the frontside of the brake. Dimensions are 14ft long by 8-1/2ft wide by 10ft tall.

Lot 913:Concrete Aggregate Portable Plant

Portable aggregate bin used for mixing concrete on site. A few of the bins and auger housings are rusted out at the base. Machine has not been used for some time and several parts look to be seized. The belt for the conveyor at the front is missing. The tires on the trailer are 9.00-20 Armstrongs and they are weather cracked and will need replaced. Trailer has an air compressor mounted on the rear. Dimensions are 58ft long by 100” wide by 14ft tall.

Lot 914:Engine Hoist

Cylinder moves freely. As well as the wheels it is adjustable in and out. The bottle jack mount has been welded. There is a homemade bracket for weight. 

Lot 915:Man Basket

The door is stuck open. The door is bent. It measures 68 1/2” tall, 35 1/2” wide, and 48” long. The backside panel is bent as well as the floorpan. The floorpan is rusted through.

Lot 916:(10) Wheels

Lot includes six 8 bolt wheels that measure 16 1/2” by 6”. There is one 4 bolt split wheel that measures 13” by 5 1/2”. The rim is bent. There is a 6 bolt wheel that measures 19” by 5 1/4”. There are two small wheels that measure 6 7/8” by 8 1/4”.

Lot 917:Contents of Wall

Lot includes a large variety of items such as a tire cage, radiators, diamond plating sheet, wheels, tires, sheet metal, jacks, rolling cart, tin sheet, and more. Tire cage measures 41” by 20” and is 56 1/2” tall. Engines beside the lot is not included. Bottle jack is stuck. Tires are worn and weather checked. Buyer must take all items.

Lot 918:(2) Racks and Contents

Lot includes an a frame rack that measures 73 1/2” tall, 34” wide, and 70” long. The smaller rack measures 33 1/2” wide, 37” long, and 58 1/4” tall. Lot includes chain binders, chain, and clevises. 

Lot 919:2-1/2 Ton A Frame Hoist and More

A frame measures 12’ by 7’ and is 13 1/2’. The stand beside it measures 30 1/2” wide by 84” long and is 32 3/4” tall. Lot also includes a screw jack, drums, a tank, other stand. Two drums are not empty while one is. Lot also includes a 205” 2 1/4” pole. Buyer must take all items. 

Lot 920:MB Century Tool Box and (4) Tanks

The bottom rolling tool check is 18” by 26 1/2” and 33 1/2” tall. It rolls freely. Drawers open and close. The top toolbox measures 14 3/4” by 26” and is 17 1/2” tall. The toolbox top door has broken hinges. Two drawers are froze shut. Two large tanks are 60” tall. The short one is 46 1/2” tall. 

Lot 921:Troy-Bilt Pressure Washer

Engine is free. It is being sold untested. It has a Briggs and Stratton engine and is rated at 3000 max PSI and 2.7 max GPM. Air box is missing as well as the soap tank lid.

Lot 922:Reed Vice with Homemade Stand

6” vice turns freely. The vice and stand measures 32 1/2” tall. It is a No. 106R.

Lot 923:Steel Roller and More

Lot includes a steel roller with electric motor. It is being sold untested. Lot includes large amount of steel behind the roller. Buyer must take all items. 

Lot 924:Electric Pressure Washer

Electric pressure washer is being sold untested. It measures 48” by 116” and is 56” tall. Hoses are in poor shape. The fiberglass tank shows wear.

Lot 925:2 Ton A Frame Hoist

A frame measures 12’ by 6’ and is 11 1/2’ tall. Wheels are froze. The hoist is a Yale 2 ton. 

Lot 1087:3 Bottom Mounted Plow

Plow has been in the ground for some time but appears to be complete. One moldboard has been repaired and another is rusted out at the front. The shares look thin. The gauge wheel size is 7.50-15 and the tire needs replaced. The rim is bent on the outer lip and the hubcap is missing. 

Lot 1101:Minneapolis Moline Radiators

One grille screen loosely installed, unsure of figment, missing radiator caps.

Lot 2017:David Bradley Mower

Engine is free, mower blade turns freely. Tire size is 6.00-16, tires have a little weather cracking but are in good condition. Model number: 917-57560, series number 121. Machine has been repainted and paint is in good shape. Appears to be complete. The front gauge wheel is missing the pin to hold the spindle on. 

Lot 2018:Holt 10 Ton Parts

Included is a fuel tank with valve and hood sections. The fuel tank appears to be solid and in good condition, it does have a fuel small dents. There are two sets of hoods, the painted set does not have the side shield. Both sets of hood panels have been cut. 

Lot 2019:Caterpillar 10 Parts

Included is a hood and fuel tank. The hood has some small wrinkles in it but it is in good overall shape. The fuel tank appears to be solid and has the cap included.